mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-07-27 13:23:44 +09:00
9fe6d8716e
Add MTD layer driver for spi, original patch from: http://git.denx.de/?p=u-boot/u-boot-mips.git;a=commitdiff;h=bb246819cdc90493dd7089eaa51b9e639765cced Changes from Heiko Schocher against this patch: - Remove compile error if not defining CONFIG_SPI_FLASH_MTD: LD drivers/mtd/spi/built-in.o drivers/mtd/spi/sf_probe.o: In function `spi_flash_mtd_unregister': /home/hs/abb/imx6/u-boot/drivers/mtd/spi/sf_internal.h:168: multiple definition of `spi_flash_mtd_unregister' drivers/mtd/spi/sf_params.o:/home/hs/abb/imx6/u-boot/drivers/mtd/spi/sf_internal.h:168: first defined here drivers/mtd/spi/sf_ops.o: In function `spi_flash_mtd_unregister': /home/hs/abb/imx6/u-boot/drivers/mtd/spi/sf_internal.h:168: multiple definition of `spi_flash_mtd_unregister' drivers/mtd/spi/sf_params.o:/home/hs/abb/imx6/u-boot/drivers/mtd/spi/sf_internal.h:168: first defined here make[1]: *** [drivers/mtd/spi/built-in.o] Fehler 1 make: *** [drivers/mtd/spi] Fehler 2 - Add a README entry. - Add correct writebufsize, to fit with Linux v3.14 MTD, UBI/UBIFS sync. Note (From Jagan): For testing raw mtd parition erase/read/write operations using cmd_sf, sf_mtd should be required to register the spi flash device to MTD layer but the sf_mtd_info ops were not required until and unless if we use any flash filesystem layer say for example UBI. Due to this the foot-print got increased ~290bytes in non-UBI case here that should be acceptible. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Heiko Schocher <hs@denx.de> Tested-by: Jagannadh Teki <jteki@openedev.com> Reviewed-by: Jagannadh Teki <jteki@openedev.com>
24 lines
601 B
Makefile
24 lines
601 B
Makefile
#
|
|
# (C) Copyright 2006
|
|
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
#
|
|
# SPDX-License-Identifier: GPL-2.0+
|
|
#
|
|
|
|
obj-$(CONFIG_DM_SPI_FLASH) += sf-uclass.o
|
|
|
|
ifdef CONFIG_SPL_BUILD
|
|
obj-$(CONFIG_SPL_SPI_LOAD) += spi_spl_load.o
|
|
obj-$(CONFIG_SPL_SPI_BOOT) += fsl_espi_spl.o
|
|
endif
|
|
|
|
#ifndef CONFIG_DM_SPI
|
|
obj-$(CONFIG_SPI_FLASH) += sf_probe.o
|
|
#endif
|
|
obj-$(CONFIG_SF_DATAFLASH) += sf_dataflash.o
|
|
obj-$(CONFIG_CMD_SF) += sf.o
|
|
obj-$(CONFIG_SPI_FLASH) += sf_ops.o sf_params.o
|
|
obj-$(CONFIG_SPI_FLASH_MTD) += sf_mtd.o
|
|
obj-$(CONFIG_SPI_FLASH_SANDBOX) += sandbox.o
|
|
obj-$(CONFIG_SPI_M95XXX) += eeprom_m95xxx.o
|