mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-27 20:38:52 +09:00
![Fabio Estevam](/assets/img/avatar_default.png)
SolidRun has designed the Hummingboard board based on mx6q/dl/solo. Add the initial support for the mx6 solo variant. More information about this hardware can be found at: http://imx.solid-run.com/wiki/index.php?title=Carrier-One_Hardware (Carrier-One was the previous name of Hummingboard). Based on the work from Jon Nettleton <jon.nettleton@gmail.com>. Signed-off-by: Jon Nettleton <jon.nettleton@gmail.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
75 lines
2.2 KiB
INI
75 lines
2.2 KiB
INI
/*
|
|
* Copyright (C) 2013 Boundary Devices
|
|
* Copyright (C) 2013 SolidRun ltd.
|
|
* Copyright (C) 2013 Jon Nettleton <jon.nettleton@gmail.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
/* ZQ Calibrations */
|
|
DATA 4, MX6_MMDC_P0_MPZQHWCTRL, 0xa1390003
|
|
DATA 4, MX6_MMDC_P1_MPZQHWCTRL, 0xa1390003
|
|
/* write leveling */
|
|
DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x005a0057
|
|
DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x004a0052
|
|
/*
|
|
* DQS gating, read delay, write delay calibration values
|
|
* based on calibration compare of 0x00ffff00
|
|
*/
|
|
DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x02480240
|
|
DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x02340230
|
|
DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x40404440
|
|
DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x38343034
|
|
/* read data bit delay */
|
|
DATA 4, MX6_MMDC_P0_MPRDDQBY0DL, 0x33333333
|
|
DATA 4, MX6_MMDC_P0_MPRDDQBY1DL, 0x33333333
|
|
DATA 4, MX6_MMDC_P0_MPRDDQBY2DL, 0x33333333
|
|
DATA 4, MX6_MMDC_P0_MPRDDQBY3DL, 0x33333333
|
|
/* Complete calibration by forced measurement */
|
|
DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000800
|
|
DATA 4, MX6_MMDC_P1_MPMUR0, 0x00000800
|
|
|
|
/*
|
|
* MMDC init:
|
|
* in DDR3, 32-bit mode, only MMDC0 is initiated:
|
|
*/
|
|
DATA 4, MX6_MMDC_P0_MDPDC, 0x0002002d
|
|
DATA 4, MX6_MMDC_P0_MDOTC, 0x00333040
|
|
|
|
DATA 4, MX6_MMDC_P0_MDCFG0, 0x3f435313
|
|
DATA 4, MX6_MMDC_P0_MDCFG1, 0xb66e8b63
|
|
|
|
DATA 4, MX6_MMDC_P0_MDCFG2, 0x01ff00db
|
|
DATA 4, MX6_MMDC_P0_MDMISC, 0x00011740
|
|
DATA 4, MX6_MMDC_P0_MDSCR, 0x00008000
|
|
DATA 4, MX6_MMDC_P0_MDRWD, 0x000026d2
|
|
DATA 4, MX6_MMDC_P0_MDOR, 0x00431023
|
|
/* CS0_END - 0x2fffffff, 512M */
|
|
DATA 4, MX6_MMDC_P0_MDASP, 0x00000017
|
|
|
|
/* MMDC0_MAARCR ADOPT optimized priorities. Dyn jump disabled */
|
|
DATA 4, 0x021b0400, 0x11420000
|
|
|
|
/* MMDC0_MDCTL- row-14bits; col-10bits; burst length 8;32-bit data bus */
|
|
DATA 4, MX6_MMDC_P0_MDCTL, 0x83190000
|
|
|
|
/*
|
|
* Initialize 2GB DDR3 - Hynix H5TQ2G63BFR-H9C
|
|
* MR2
|
|
*/
|
|
DATA 4, MX6_MMDC_P0_MDSCR, 0x00008032
|
|
/* MR3 */
|
|
DATA 4, MX6_MMDC_P0_MDSCR, 0x00008033
|
|
/* MR1 */
|
|
DATA 4, MX6_MMDC_P0_MDSCR, 0x00008031
|
|
/* MR0 */
|
|
DATA 4, MX6_MMDC_P0_MDSCR, 0x05208030
|
|
/* ZQ calibration */
|
|
DATA 4, MX6_MMDC_P0_MDSCR, 0x04008040
|
|
/* final DDR setup */
|
|
DATA 4, MX6_MMDC_P0_MDREF, 0x00007800
|
|
DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00000007
|
|
DATA 4, MX6_MMDC_P0_MDPDC, 0x0002556d
|
|
DATA 4, MX6_MMDC_P0_MAPSR, 0x00011006
|
|
DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000
|