mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-22 01:48:52 +09:00
![Andreas Bießmann](/assets/img/avatar_default.png)
A lot of at91 boards have the console_init_f in board_init. This is useless cause it was called before by generic code in lib/board.c. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> cc: Jens Scharsig <esw@bus-elektronik.de> cc: Stelian Pop <stelian@popies.net> cc: Sedji Gaouaou<sedji.gaouaou@atmel.com> cc: Albin Tonnerre <albin.tonnerre@free-electrons.com> cc: Eric Benard <eric@eukrea.com> Tested-by: voice.shen@atmel.com Tested-by: voice.shen@atmel.com Acked-by: Jens Scharsig (BuS Elektronik) <esw@bus-elektronik.de> Tested-by: Jens Scharsig (BuS Elektronik) <esw@bus-elektronik.de>
549 lines
14 KiB
C
549 lines
14 KiB
C
/*
|
|
* (C) Copyright 2009-2012
|
|
* Jens Scharsig <esw@bus-elekronik.de>
|
|
* BuS Elektronik GmbH & Co. KG
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <config.h>
|
|
#include <common.h>
|
|
#include <asm/sizes.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/hardware.h>
|
|
#include <asm/arch/clk.h>
|
|
#include <asm/arch/at91_matrix.h>
|
|
#include <asm/arch/at91sam9_smc.h>
|
|
#include <asm/arch/at91_pmc.h>
|
|
#include <asm/arch/at91_pio.h>
|
|
#include <asm/arch/at91_rstc.h>
|
|
#include <asm/arch/at91sam9263.h>
|
|
#include <asm/arch/gpio.h>
|
|
#include <asm/arch/at91_common.h>
|
|
#include <lcd.h>
|
|
#include <i2c.h>
|
|
#include <atmel_lcdc.h>
|
|
#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
|
|
#include <net.h>
|
|
#endif
|
|
#include <netdev.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#ifdef CONFIG_CMD_NAND
|
|
static void vl_ma2sc_nand_hw_init(void)
|
|
{
|
|
unsigned long csa;
|
|
at91_smc_t *smc = (at91_smc_t *) ATMEL_BASE_SMC0;
|
|
at91_matrix_t *matrix = (at91_matrix_t *) ATMEL_BASE_MATRIX;
|
|
at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
|
|
|
|
at91_set_pio_output(AT91_PIO_PORTA, 13, 1); /* CAN_TX -> H */
|
|
at91_set_pio_output(AT91_PIO_PORTA, 12, 1); /* CAN_STB -> H */
|
|
at91_set_pio_output(AT91_PIO_PORTA, 11, 1); /* CAN_EN -> H */
|
|
|
|
/* Enable CS3 */
|
|
csa = readl(&matrix->csa[0]) | AT91_MATRIX_CSA_EBI_CS3A;
|
|
writel(csa, &matrix->csa[0]);
|
|
|
|
/* Configure SMC CS3 for NAND/SmartMedia */
|
|
writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) |
|
|
AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0),
|
|
&smc->cs[3].setup);
|
|
|
|
writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(3) |
|
|
AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(3),
|
|
&smc->cs[3].pulse);
|
|
|
|
writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(5),
|
|
&smc->cs[3].cycle);
|
|
writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
|
|
AT91_SMC_MODE_DBW_8 |
|
|
AT91_SMC_MODE_TDF_CYCLE(2),
|
|
&smc->cs[3].mode);
|
|
writel((1 << ATMEL_ID_PIOB) | (1 << ATMEL_ID_PIOCDE),
|
|
&pmc->pcer);
|
|
|
|
/* Configure RDY/BSY */
|
|
#ifdef CONFIG_SYS_NAND_READY_PIN
|
|
at91_set_pio_input(CONFIG_SYS_NAND_READY_PIN, 1);
|
|
#endif
|
|
/* Enable NandFlash */
|
|
at91_set_pio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_MACB
|
|
static void vl_ma2sc_macb_hw_init(void)
|
|
{
|
|
unsigned long erstl;
|
|
at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
|
|
at91_rstc_t *rstc = (at91_rstc_t *) ATMEL_BASE_RSTC;
|
|
/* Enable clock */
|
|
writel(1 << ATMEL_ID_EMAC, &pmc->pcer);
|
|
|
|
erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK;
|
|
|
|
/* Need to reset PHY -> 500ms reset */
|
|
writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(0x0D) |
|
|
AT91_RSTC_MR_URSTEN, &rstc->mr);
|
|
|
|
writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr);
|
|
/* Wait for end hardware reset */
|
|
while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL))
|
|
;
|
|
|
|
/* Restore NRST value */
|
|
writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN, &rstc->mr);
|
|
|
|
at91_macb_hw_init();
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_LCD
|
|
vidinfo_t panel_info = {
|
|
.vl_col = 320,
|
|
.vl_row = 240,
|
|
.vl_clk = 6500000,
|
|
.vl_sync = ATMEL_LCDC_INVDVAL_INVERTED |
|
|
ATMEL_LCDC_INVLINE_INVERTED |
|
|
ATMEL_LCDC_INVVD_INVERTED |
|
|
ATMEL_LCDC_INVFRAME_INVERTED,
|
|
.vl_bpix = (ATMEL_LCDC_PIXELSIZE_8 >> 5),
|
|
.vl_tft = 1,
|
|
.vl_hsync_len = 5, /* Horiz Sync Pulse Width */
|
|
.vl_left_margin = 68, /* horiz back porch */
|
|
.vl_right_margin = 20, /* horiz front porch */
|
|
.vl_vsync_len = 2, /* vert Sync Pulse Width */
|
|
.vl_upper_margin = 18, /* vert back porch */
|
|
.vl_lower_margin = 4, /* vert front porch */
|
|
.mmio = ATMEL_BASE_LCDC,
|
|
};
|
|
|
|
void lcd_enable(void)
|
|
{
|
|
}
|
|
|
|
void lcd_disable(void)
|
|
{
|
|
}
|
|
|
|
static void vl_ma2sc_lcd_hw_init(void)
|
|
{
|
|
at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
|
|
|
|
at91_set_a_periph(AT91_PIO_PORTC, 0, 0); /* LCDVSYNC */
|
|
at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* LCDHSYNC */
|
|
at91_set_a_periph(AT91_PIO_PORTC, 2, 0); /* LCDDOTCK */
|
|
at91_set_a_periph(AT91_PIO_PORTC, 3, 0); /* LCDDEN */
|
|
at91_set_b_periph(AT91_PIO_PORTB, 9, 0); /* LCDCC */
|
|
|
|
at91_set_a_periph(AT91_PIO_PORTC, 4, 0); /* LCDD0 */
|
|
at91_set_a_periph(AT91_PIO_PORTC, 5, 0); /* LCDD1 */
|
|
at91_set_a_periph(AT91_PIO_PORTC, 6, 0); /* LCDD2 */
|
|
at91_set_a_periph(AT91_PIO_PORTC, 7, 0); /* LCDD3 */
|
|
at91_set_a_periph(AT91_PIO_PORTC, 8, 0); /* LCDD4 */
|
|
at91_set_a_periph(AT91_PIO_PORTC, 9, 0); /* LCDD5 */
|
|
at91_set_a_periph(AT91_PIO_PORTC, 10, 0); /* LCDD6 */
|
|
at91_set_a_periph(AT91_PIO_PORTC, 11, 0); /* LCDD7 */
|
|
|
|
at91_set_a_periph(AT91_PIO_PORTC, 13, 0); /* LCDD9 */
|
|
at91_set_a_periph(AT91_PIO_PORTC, 14, 0); /* LCDD10 */
|
|
at91_set_a_periph(AT91_PIO_PORTC, 15, 0); /* LCDD11 */
|
|
at91_set_a_periph(AT91_PIO_PORTC, 16, 0); /* LCDD12 */
|
|
at91_set_b_periph(AT91_PIO_PORTC, 12, 0); /* LCDD13 */
|
|
at91_set_a_periph(AT91_PIO_PORTC, 18, 0); /* LCDD14 */
|
|
at91_set_a_periph(AT91_PIO_PORTC, 19, 0); /* LCDD15 */
|
|
|
|
at91_set_a_periph(AT91_PIO_PORTC, 20, 0); /* LCDD26 */
|
|
at91_set_a_periph(AT91_PIO_PORTC, 21, 0); /* LCDD17 */
|
|
at91_set_a_periph(AT91_PIO_PORTC, 22, 0); /* LCDD18 */
|
|
at91_set_a_periph(AT91_PIO_PORTC, 23, 0); /* LCDD19 */
|
|
at91_set_a_periph(AT91_PIO_PORTC, 24, 0); /* LCDD20 */
|
|
at91_set_b_periph(AT91_PIO_PORTC, 17, 0); /* LCDD21 */
|
|
at91_set_a_periph(AT91_PIO_PORTC, 26, 0); /* LCDD22 */
|
|
at91_set_a_periph(AT91_PIO_PORTC, 27, 0); /* LCDD23 */
|
|
|
|
at91_set_pio_output(AT91_PIO_PORTE, 0, 0); /* LCD QXH */
|
|
|
|
at91_set_pio_output(AT91_PIO_PORTE, 2, 0); /* LCD SHUT */
|
|
at91_set_pio_output(AT91_PIO_PORTE, 3, 1); /* LCD TopBottom */
|
|
at91_set_pio_output(AT91_PIO_PORTE, 4, 0); /* LCD REV */
|
|
at91_set_pio_output(AT91_PIO_PORTE, 5, 1); /* LCD RightLeft */
|
|
at91_set_pio_output(AT91_PIO_PORTE, 6, 0); /* LCD Color Mode CM */
|
|
at91_set_pio_output(AT91_PIO_PORTE, 7, 0); /* LCD BGR */
|
|
|
|
at91_set_pio_output(AT91_PIO_PORTB, 9, 0); /* LCD CC */
|
|
|
|
writel(1 << ATMEL_ID_LCDC, &pmc->pcer);
|
|
gd->fb_base = ATMEL_BASE_SRAM0;
|
|
}
|
|
#endif /* Config LCD */
|
|
|
|
#ifdef CONFIG_BOARD_EARLY_INIT_F
|
|
int board_early_init_f(void)
|
|
{
|
|
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
|
|
|
|
/* Enable clocks for all PIOs */
|
|
writel((1 << ATMEL_ID_PIOA) | (1 << ATMEL_ID_PIOB) |
|
|
(1 << ATMEL_ID_PIOCDE),
|
|
&pmc->pcer);
|
|
|
|
at91_seriald_hw_init();
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
int board_init(void)
|
|
{
|
|
at91_smc_t *smc = (at91_smc_t *) ATMEL_BASE_SMC0;
|
|
at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
|
|
u32 pin;
|
|
|
|
pin = 0x1F000001;
|
|
writel(pin, &pio->pioa.idr);
|
|
writel(pin, &pio->pioa.pudr);
|
|
writel(pin, &pio->pioa.per);
|
|
writel(pin, &pio->pioa.oer);
|
|
writel(pin, &pio->pioa.sodr);
|
|
writel((1 << 25), &pio->pioa.codr);
|
|
|
|
pin = 0x1F000100;
|
|
writel(pin, &pio->piob.idr);
|
|
writel(pin, &pio->piob.pudr);
|
|
writel(pin, &pio->piob.per);
|
|
writel(pin, &pio->piob.oer);
|
|
writel(pin, &pio->piob.codr);
|
|
writel((1 << 24), &pio->piob.sodr);
|
|
|
|
pin = 0x40000000; /* Pullup DRxD enbable */
|
|
writel(pin, &pio->pioc.puer);
|
|
|
|
pin = 0x0000000F; /* HWversion als Input */
|
|
writel(pin, &pio->piod.idr);
|
|
writel(pin, &pio->piod.puer);
|
|
writel(pin, &pio->piod.per);
|
|
writel(pin, &pio->piod.odr);
|
|
writel(pin, &pio->piod.owdr);
|
|
|
|
gd->bd->bi_arch_number = MACH_TYPE_VL_MA2SC;
|
|
/* adress of boot parameters */
|
|
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
|
|
|
|
writel(CONFIG_SYS_SMC0_MODE0_VAL, &smc->cs[0].setup);
|
|
writel(CONFIG_SYS_SMC0_CYCLE0_VAL, &smc->cs[0].cycle);
|
|
writel(CONFIG_SYS_SMC0_PULSE0_VAL, &smc->cs[0].pulse);
|
|
writel(CONFIG_SYS_SMC0_SETUP0_VAL, &smc->cs[0].setup);
|
|
|
|
#ifdef CONFIG_CMD_NAND
|
|
vl_ma2sc_nand_hw_init();
|
|
#endif
|
|
#ifdef CONFIG_MACB
|
|
vl_ma2sc_macb_hw_init();
|
|
#endif
|
|
#ifdef CONFIG_USB_OHCI_NEW
|
|
at91_uhp_hw_init();
|
|
#endif
|
|
#ifdef CONFIG_LCD
|
|
vl_ma2sc_lcd_hw_init();
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_MISC_INIT_R
|
|
int misc_init_r(void)
|
|
{
|
|
uchar buffer[8];
|
|
at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
|
|
u32 pin;
|
|
|
|
buffer[0] = 0x04;
|
|
buffer[1] = 0x00;
|
|
if (i2c_write(0x68, 0x0E, 1, buffer, 2) != 0)
|
|
puts("error reseting rtc clock\n\0");
|
|
|
|
/* read hardware version */
|
|
|
|
pin = (readl(&pio->piod.pdsr) & 0x0F) + 0x44;
|
|
printf("Board: revision %c\n", pin);
|
|
buffer[0] = pin;
|
|
buffer[1] = 0;
|
|
setenv("revision", (char *) buffer);
|
|
|
|
pin = 0x40000000; /* Pullup DRxD enbable */
|
|
writel(pin, &pio->pioc.puer);
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
int dram_init(void)
|
|
{
|
|
gd->ram_size = get_ram_size((long *) CONFIG_SYS_SDRAM_BASE,
|
|
CONFIG_SYS_SDRAM_SIZE);
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_RESET_PHY_R
|
|
void reset_phy(void)
|
|
{
|
|
#ifdef CONFIG_MACB
|
|
/*
|
|
* Initialize ethernet HW addr prior to starting Linux,
|
|
* needed for nfsroot
|
|
*/
|
|
eth_init(gd->bd);
|
|
#endif
|
|
}
|
|
#endif
|
|
|
|
int board_eth_init(bd_t *bis)
|
|
{
|
|
int rc = 0;
|
|
#ifdef CONFIG_MACB
|
|
rc = macb_eth_initialize(0, (void *) ATMEL_BASE_EMAC, 0x01);
|
|
#endif
|
|
return rc;
|
|
}
|
|
|
|
#ifdef CONFIG_SOFT_I2C
|
|
void i2c_init_board(void)
|
|
{
|
|
u32 pin;
|
|
|
|
at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
|
|
at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
|
|
u8 sda = (1<<4);
|
|
u8 scl = (1<<5);
|
|
|
|
writel(1 << ATMEL_ID_PIOB, &pmc->pcer);
|
|
pin = sda | scl;
|
|
writel(pin, &pio->piob.idr); /* Disable Interupt */
|
|
writel(pin, &pio->piob.pudr);
|
|
writel(pin, &pio->piob.per);
|
|
writel(pin, &pio->piob.oer);
|
|
writel(pin, &pio->piob.sodr);
|
|
}
|
|
#endif
|
|
|
|
void watchdog_reset(void)
|
|
{
|
|
at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
|
|
u32 pin = 0x1; /* PA0 */
|
|
|
|
if ((readl(&pio->pioa.odsr) & pin) > 0)
|
|
writel(pin, &pio->pioa.codr);
|
|
else
|
|
writel(pin, &pio->pioa.sodr);
|
|
}
|
|
|
|
void enable_caches(void)
|
|
{
|
|
#ifndef CONFIG_SYS_DCACHE_OFF
|
|
dcache_enable();
|
|
#endif
|
|
}
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
|
|
int do_ledtest(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
int rcode = 1;
|
|
int row;
|
|
int col;
|
|
u32 pinz;
|
|
u32 pins;
|
|
at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
|
|
|
|
at91_set_pio_output(AT91_PIO_PORTB, 8, 0); /* LCD DIM */
|
|
|
|
pins = 0x1F000000;
|
|
writel(pins, &pio->pioa.idr);
|
|
writel(pins, &pio->pioa.pudr);
|
|
writel(pins, &pio->pioa.per);
|
|
writel(pins, &pio->pioa.oer);
|
|
writel(pins, &pio->pioa.sodr);
|
|
|
|
pinz = 0x1F000000;
|
|
writel(pinz, &pio->piob.idr);
|
|
writel(pinz, &pio->piob.pudr);
|
|
writel(pinz, &pio->piob.per);
|
|
writel(pinz, &pio->piob.oer);
|
|
writel(pinz, &pio->piob.sodr);
|
|
|
|
for (row = 0; row < 5; row++) {
|
|
for (col = 0; col < 5; col++) {
|
|
writel((0x01000000 << col), &pio->piob.sodr);
|
|
writel((0x01000000 << row), &pio->pioa.codr);
|
|
printf("LED Test %d x %d\n", row, col);
|
|
udelay(1000000);
|
|
writel(pinz, &pio->piob.codr);
|
|
writel(pins, &pio->pioa.sodr);
|
|
}
|
|
}
|
|
return rcode;
|
|
}
|
|
|
|
void poweroff(void)
|
|
{
|
|
watchdog_reset();
|
|
at91_set_pio_output(AT91_PIO_PORTA, 13, 1); /* CAN_TX -> H */
|
|
udelay(100);
|
|
at91_set_pio_output(AT91_PIO_PORTA, 12, 0); /* CAN_STB -> L */
|
|
udelay(100);
|
|
at91_set_pio_output(AT91_PIO_PORTA, 11, 0); /* CAN_EN -> L */
|
|
udelay(100);
|
|
while (1)
|
|
watchdog_reset();
|
|
}
|
|
|
|
int do_poweroff(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
int rcode = 1;
|
|
poweroff();
|
|
return rcode;
|
|
}
|
|
|
|
int do_beep(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
int i;
|
|
u32 freq;
|
|
u32 durate;
|
|
int rcode = 1;
|
|
|
|
freq = 1000;
|
|
durate = 2;
|
|
switch (argc) {
|
|
case 3:
|
|
durate = simple_strtoul(argv[2], NULL, 10);
|
|
case 2:
|
|
freq = simple_strtoul(argv[1], NULL, 10);
|
|
case 1:
|
|
break;
|
|
default:
|
|
cmd_usage(cmdtp);
|
|
rcode = 1;
|
|
break;
|
|
}
|
|
durate = durate * freq;
|
|
freq = 500000 / freq;
|
|
for (i = 0; i < durate; i++) {
|
|
at91_set_pio_output(AT91_PIO_PORTB, 29, 1); /* Sound On*/
|
|
udelay(freq);
|
|
at91_set_pio_output(AT91_PIO_PORTB, 29, 0); /* Sound Off*/
|
|
udelay(freq);
|
|
}
|
|
at91_set_pio_output(AT91_PIO_PORTB, 29, 0); /* Sound Off*/
|
|
return rcode;
|
|
}
|
|
|
|
int do_keytest(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
int rcode = 1;
|
|
int row;
|
|
u32 col;
|
|
u32 pinz;
|
|
u32 pins;
|
|
at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO;
|
|
at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
|
|
|
|
writel((1 << ATMEL_ID_PIOA), &pmc->pcer);
|
|
|
|
pins = 0x001F0000;
|
|
writel(pins, &pio->pioa.idr);
|
|
writel(pins, &pio->pioa.pudr);
|
|
writel(pins, &pio->pioa.per);
|
|
writel(pins, &pio->pioa.odr);
|
|
|
|
pinz = 0x000F0000;
|
|
writel(pinz, &pio->piob.idr);
|
|
writel(pinz, &pio->piob.pudr);
|
|
writel(pinz, &pio->piob.per);
|
|
writel(pinz, &pio->piob.oer);
|
|
writel(pinz, &pio->piob.codr);
|
|
|
|
while (1) {
|
|
col = 0;
|
|
for (row = 0; row < 4; row++) {
|
|
writel((0x00010000 << row), &pio->piob.sodr);
|
|
udelay(10000);
|
|
col <<= 4;
|
|
col |= ((readl(&pio->pioa.pdsr) >> 16) & 0xF) ^ 0xF ;
|
|
writel(pinz, &pio->piob.codr);
|
|
}
|
|
printf("Matix: ");
|
|
for (row = 0; row < 16; row++) {
|
|
printf("%1.1d", col & 1);
|
|
col >>= 1;
|
|
}
|
|
printf(" SP %d\r ",
|
|
1 ^ (1 & (readl(&pio->piob.pdsr) >> 20)));
|
|
if ((1 & (readl(&pio->pioa.pdsr) >> 1)) == 0) {
|
|
/* SHUTDOWN */
|
|
row = 0;
|
|
while (row < 1000) {
|
|
if ((1 & (readl(&pio->pioa.pdsr) >> 1)) == 0)
|
|
row++;
|
|
udelay(100);
|
|
}
|
|
udelay(100000);
|
|
row = 0;
|
|
while (row < 1000) {
|
|
if ((1 & (readl(&pio->pioa.pdsr) >> 1)) > 0) {
|
|
row++;
|
|
udelay(1000);
|
|
}
|
|
}
|
|
poweroff();
|
|
while (1)
|
|
;
|
|
}
|
|
}
|
|
return rcode;
|
|
}
|
|
|
|
/*****************************************************************************/
|
|
|
|
U_BOOT_CMD(
|
|
ledtest, 1, 0, do_ledtest,
|
|
"test ledmatrix",
|
|
"\n"
|
|
);
|
|
|
|
U_BOOT_CMD(
|
|
keytest, 1, 0, do_keytest,
|
|
"test keymatix and special keys, poweroff on pressing ON key",
|
|
"\n"
|
|
);
|
|
|
|
U_BOOT_CMD(
|
|
poweroff, 1, 0, do_poweroff,
|
|
"power off",
|
|
"\n"
|
|
);
|
|
|
|
U_BOOT_CMD(
|
|
beep, 3, 0, do_beep,
|
|
"[freq [duration]]",
|
|
"freq frequence of beep\nduration duration of beep\n"
|
|
);
|
|
|
|
/*****************************************************************************/
|