Hans de Goede 9ee54858e4 sun7i: Add support for the Wits Pro A20 DKT board ... The Wits Pro A20 DKT is an A20 Development KiT with 1G RAM, 4G NAND, sdio wifi, 1Gbit ethernet, 1024x768 lcd screen with ft5x_ts touchscreen and a ton of IO connectors. Note there seem to be multiple sdcard slots on the board (4 in total), but other then mmc0 none of these are hooked up by default, there is a ton of dip-switches which likely allow hooking some of these up, but the documentation of the board only describes the use of a fraction of them, so for now we only support mmc0. Also see: http://www.merrii.com/en/pla_d.asp?id=163 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>		2015-03-10 15:20:24 +01:00
..
ahci.c	sunxi: ahci: Add a delay after enabling target power	2014-11-25 13:38:46 +01:00
board.c	sunxi: video: Add support for LCD panels which need to be configured via i2c	2015-02-20 08:11:57 +01:00
dram_sun4i_auto.c	sunxi: dram: Support more sun[457]i dram parameters in Kconfig	2015-02-02 14:04:23 +01:00
dram_sun5i_auto.c	sunxi: Make CONFIG_DRAM_TPR3 apply to sun[57]i	2015-03-10 15:20:23 +01:00
dram_timings_sun4i.h	sunxi: dram: Optionally use standard JEDEC timings for sun[457]i	2015-02-02 14:04:15 +01:00
gmac.c	sunxi: Add a GMAC Transmit Clock Delay Chain Kconfig option	2015-02-02 13:55:14 +01:00
Kconfig	sunxi: musb: Check Vbus-det before enabling otg port power	2015-02-21 16:53:33 +01:00
MAINTAINERS	sun7i: Add support for the Wits Pro A20 DKT board	2015-03-10 15:20:24 +01:00
Makefile	sunxi: Convert sun5i boards to use auto dram configuration	2015-02-02 13:55:14 +01:00