mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-07-15 15:46:16 +09:00
944c7a3176
This patch enables the use of the kwboot tool, to boot mainline U-Boot
on the Marvell Armada XP/38x SoC's. This is done by returning to the
SoC's BootROM after SPL has initialized the SDRAM. We need to make sure
to not reconfigure the internal register space and MBARs. Otherwise
the BootROM will not be able to continue after SPL jumps back to it.
To use this feature, please don't forget to change the BOOT_FROM line
in your board specfic kwbimage.cfg file this way:
BOOT_FROM uart
Tested on these Marvell eval boards:
DB-MV784MP-GP - Armada XP
DB-88F6820-GP - Armada 38x
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Dirk Eibach <eibach@gdsys.de>
Cc: Kevin Smith <kevin.smith@elecsyscorp.com>
Cc: Luka Perkov <luka.perkov@sartura.hr>
140 lines
2.7 KiB
C
140 lines
2.7 KiB
C
/*
|
|
* (C) Copyright 2009
|
|
* Marvell Semiconductor <www.marvell.com>
|
|
* Written-by: Prafulla Wadaskar <prafulla@marvell.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef _MVEBU_CPU_H
|
|
#define _MVEBU_CPU_H
|
|
|
|
#include <asm/system.h>
|
|
|
|
#ifndef __ASSEMBLY__
|
|
|
|
#define MVEBU_REG_PCIE_DEVID (MVEBU_REG_PCIE_BASE + 0x00)
|
|
#define MVEBU_REG_PCIE_REVID (MVEBU_REG_PCIE_BASE + 0x08)
|
|
|
|
enum memory_bank {
|
|
BANK0,
|
|
BANK1,
|
|
BANK2,
|
|
BANK3
|
|
};
|
|
|
|
enum cpu_winen {
|
|
CPU_WIN_DISABLE,
|
|
CPU_WIN_ENABLE
|
|
};
|
|
|
|
enum cpu_target {
|
|
CPU_TARGET_DRAM = 0x0,
|
|
CPU_TARGET_DEVICEBUS_BOOTROM_SPI = 0x1,
|
|
CPU_TARGET_ETH23 = 0x3,
|
|
CPU_TARGET_PCIE02 = 0x4,
|
|
CPU_TARGET_ETH01 = 0x7,
|
|
CPU_TARGET_PCIE13 = 0x8,
|
|
CPU_TARGET_SASRAM = 0x9,
|
|
CPU_TARGET_NAND = 0xd,
|
|
};
|
|
|
|
enum cpu_attrib {
|
|
CPU_ATTR_SASRAM = 0x01,
|
|
CPU_ATTR_DRAM_CS0 = 0x0e,
|
|
CPU_ATTR_DRAM_CS1 = 0x0d,
|
|
CPU_ATTR_DRAM_CS2 = 0x0b,
|
|
CPU_ATTR_DRAM_CS3 = 0x07,
|
|
CPU_ATTR_NANDFLASH = 0x2f,
|
|
CPU_ATTR_SPIFLASH = 0x1e,
|
|
CPU_ATTR_BOOTROM = 0x1d,
|
|
CPU_ATTR_PCIE_IO = 0xe0,
|
|
CPU_ATTR_PCIE_MEM = 0xe8,
|
|
CPU_ATTR_DEV_CS0 = 0x3e,
|
|
CPU_ATTR_DEV_CS1 = 0x3d,
|
|
CPU_ATTR_DEV_CS2 = 0x3b,
|
|
CPU_ATTR_DEV_CS3 = 0x37,
|
|
};
|
|
|
|
enum {
|
|
MVEBU_SOC_AXP,
|
|
MVEBU_SOC_A38X,
|
|
MVEBU_SOC_UNKNOWN,
|
|
};
|
|
|
|
/*
|
|
* Default Device Address MAP BAR values
|
|
*/
|
|
#define MBUS_PCI_MEM_BASE 0xE8000000
|
|
#define MBUS_PCI_MEM_SIZE (128 << 20)
|
|
#define MBUS_PCI_IO_BASE 0xF1100000
|
|
#define MBUS_PCI_IO_SIZE (64 << 10)
|
|
#define MBUS_SPI_BASE 0xF4000000
|
|
#define MBUS_SPI_SIZE (8 << 20)
|
|
#define MBUS_BOOTROM_BASE 0xF8000000
|
|
#define MBUS_BOOTROM_SIZE (8 << 20)
|
|
|
|
struct mbus_win {
|
|
u32 base;
|
|
u32 size;
|
|
u8 target;
|
|
u8 attr;
|
|
};
|
|
|
|
/*
|
|
* System registers
|
|
* Ref: Datasheet sec:A.28
|
|
*/
|
|
struct mvebu_system_registers {
|
|
u8 pad1[0x60];
|
|
u32 rstoutn_mask; /* 0x60 */
|
|
u32 sys_soft_rst; /* 0x64 */
|
|
};
|
|
|
|
/*
|
|
* GPIO Registers
|
|
* Ref: Datasheet sec:A.19
|
|
*/
|
|
struct kwgpio_registers {
|
|
u32 dout;
|
|
u32 oe;
|
|
u32 blink_en;
|
|
u32 din_pol;
|
|
u32 din;
|
|
u32 irq_cause;
|
|
u32 irq_mask;
|
|
u32 irq_level;
|
|
};
|
|
|
|
/* Needed for dynamic (board-specific) mbus configuration */
|
|
extern struct mvebu_mbus_state mbus_state;
|
|
|
|
/*
|
|
* functions
|
|
*/
|
|
unsigned int mvebu_sdram_bar(enum memory_bank bank);
|
|
unsigned int mvebu_sdram_bs(enum memory_bank bank);
|
|
void mvebu_sdram_size_adjust(enum memory_bank bank);
|
|
int mvebu_mbus_probe(struct mbus_win windows[], int count);
|
|
int mvebu_soc_family(void);
|
|
u32 mvebu_get_nand_clock(void);
|
|
|
|
void return_to_bootrom(void);
|
|
|
|
int mv_sdh_init(unsigned long regbase, u32 max_clk, u32 min_clk, u32 quirks);
|
|
|
|
/*
|
|
* Highspeed SERDES PHY config init, ported from bin_hdr
|
|
* to mainline U-Boot
|
|
*/
|
|
int serdes_phy_config(void);
|
|
|
|
/*
|
|
* DDR3 init / training code ported from Marvell bin_hdr. Now
|
|
* available in mainline U-Boot in:
|
|
* drivers/ddr/marvell
|
|
*/
|
|
int ddr3_init(void);
|
|
#endif /* __ASSEMBLY__ */
|
|
#endif /* _MVEBU_CPU_H */
|