mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-31 06:18:51 +09:00
![Tom Rini](/assets/img/avatar_default.png)
This converts the following to Kconfig: CONFIG_CONS_INDEX We have existing entries for this option in a number of places, with different guards on them. They're also sometimes used for things not directly inside of the serial driver. First, introduce a new symbol to guard the use of CONFIG_CONS_INDEX, so that in the case where we don't need this for the serial driver, but for some other use, we can still do it. Next, consolidate all of these into the single entry in drivers/serial/Kconfig. Finally, introduce CONS_INDEX_[023456] so that we can imply a correct value here to make the defconfig side of this smaller. Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Rework a lot of the logic here, such that I took authorship from Adam, but kept his S-o-B line] Signed-off-by: Tom Rini <trini@konsulko.com>
513 lines
14 KiB
C
513 lines
14 KiB
C
/*
|
|
* (C) Copyright 2013
|
|
* Heiko Schocher, DENX Software Engineering, hs@denx.de.
|
|
*
|
|
* Based on:
|
|
* Copyright (c) 2011 IDS GmbH, Germany
|
|
* Sergej Stepanov <ste@ids.de>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
/*
|
|
* High Level Configuration Options
|
|
*/
|
|
#define CONFIG_MPC831x
|
|
#define CONFIG_MPC8313
|
|
|
|
#define CONFIG_FSL_ELBC
|
|
|
|
#define CONFIG_MISC_INIT_R
|
|
|
|
#define CONFIG_BOOT_RETRY_TIME 900
|
|
#define CONFIG_BOOT_RETRY_MIN 30
|
|
#define CONFIG_RESET_TO_RETRY
|
|
|
|
#define CONFIG_83XX_CLKIN 66000000 /* in Hz */
|
|
#define CONFIG_SYS_CLK_FREQ CONFIG_83XX_CLKIN
|
|
|
|
#define CONFIG_SYS_IMMR 0xF0000000
|
|
|
|
#define CONFIG_SYS_ACR_PIPE_DEP 3 /* Arbiter pipeline depth (0-3) */
|
|
#define CONFIG_SYS_ACR_RPTCNT 3 /* Arbiter repeat count (0-7) */
|
|
|
|
/*
|
|
* Hardware Reset Configuration Word
|
|
* if CLKIN is 66.000MHz, then
|
|
* CSB = 132MHz, CORE = 264MHz, DDRC = 264MHz, LBC = 132MHz
|
|
*/
|
|
#define CONFIG_SYS_HRCW_LOW (0x20000000 /* reserved, must be set */ |\
|
|
HRCWL_DDR_TO_SCB_CLK_2X1 |\
|
|
HRCWL_CSB_TO_CLKIN_2X1 |\
|
|
HRCWL_CORE_TO_CSB_2X1)
|
|
|
|
#define CONFIG_SYS_HRCW_HIGH (HRCWH_PCI_HOST |\
|
|
HRCWH_CORE_ENABLE |\
|
|
HRCWH_FROM_0XFFF00100 |\
|
|
HRCWH_BOOTSEQ_DISABLE |\
|
|
HRCWH_SW_WATCHDOG_DISABLE |\
|
|
HRCWH_ROM_LOC_LOCAL_8BIT |\
|
|
HRCWH_RL_EXT_LEGACY |\
|
|
HRCWH_TSEC1M_IN_MII |\
|
|
HRCWH_TSEC2M_IN_MII |\
|
|
HRCWH_BIG_ENDIAN)
|
|
|
|
#define CONFIG_SYS_SICRH 0x00000000
|
|
#define CONFIG_SYS_SICRL (SICRL_LBC | SICRL_SPI_D)
|
|
|
|
#define CONFIG_HWCONFIG
|
|
|
|
#define CONFIG_SYS_HID0_INIT 0x000000000
|
|
#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK |\
|
|
HID0_ENABLE_INSTRUCTION_CACHE |\
|
|
HID0_DISABLE_DYNAMIC_POWER_MANAGMENT)
|
|
|
|
#define CONFIG_SYS_HID2 (HID2_HBE | 0x00020000)
|
|
|
|
/*
|
|
* Definitions for initial stack pointer and data area (in DCACHE )
|
|
*/
|
|
#define CONFIG_SYS_INIT_RAM_LOCK
|
|
#define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000
|
|
#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* End of used area in DPRAM */
|
|
#define CONFIG_SYS_GBL_DATA_SIZE 0x100
|
|
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE \
|
|
- CONFIG_SYS_GBL_DATA_SIZE)
|
|
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
|
|
|
|
/*
|
|
* Local Bus LCRR and LBCR regs
|
|
*/
|
|
#define CONFIG_SYS_LCRR_EADC LCRR_EADC_1
|
|
#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_2
|
|
#define CONFIG_SYS_LBC_LBCR (0x00040000 |\
|
|
(0xFF << LBCR_BMT_SHIFT) |\
|
|
0xF)
|
|
|
|
#define CONFIG_SYS_LBC_MRTPR 0x20000000
|
|
|
|
/*
|
|
* Internal Definitions
|
|
*/
|
|
/*
|
|
* DDR Setup
|
|
*/
|
|
#define CONFIG_SYS_DDR_BASE 0x00000000
|
|
#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE
|
|
#define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE
|
|
|
|
/*
|
|
* Manually set up DDR parameters,
|
|
* as this board has not the SPD connected to I2C.
|
|
*/
|
|
#define CONFIG_SYS_DDR_SIZE 256 /* MB */
|
|
#define CONFIG_SYS_DDR_CONFIG (CSCONFIG_EN |\
|
|
0x00010000 |\
|
|
CSCONFIG_ROW_BIT_13 |\
|
|
CSCONFIG_COL_BIT_10)
|
|
|
|
#define CONFIG_SYS_DDR_CONFIG_256 (CONFIG_SYS_DDR_CONFIG | \
|
|
CSCONFIG_BANK_BIT_3)
|
|
|
|
#define CONFIG_SYS_DDR_TIMING_3 (1 << 16) /* ext refrec */
|
|
#define CONFIG_SYS_DDR_TIMING_0 ((3 << TIMING_CFG0_RWT_SHIFT) |\
|
|
(3 << TIMING_CFG0_WRT_SHIFT) |\
|
|
(3 << TIMING_CFG0_RRT_SHIFT) |\
|
|
(3 << TIMING_CFG0_WWT_SHIFT) |\
|
|
(6 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) |\
|
|
(2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) |\
|
|
(8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) | \
|
|
(2 << TIMING_CFG0_MRS_CYC_SHIFT))
|
|
#define CONFIG_SYS_DDR_TIMING_1 ((4 << TIMING_CFG1_PRETOACT_SHIFT) |\
|
|
(12 << TIMING_CFG1_ACTTOPRE_SHIFT) |\
|
|
(4 << TIMING_CFG1_ACTTORW_SHIFT) |\
|
|
(7 << TIMING_CFG1_CASLAT_SHIFT) |\
|
|
(4 << TIMING_CFG1_REFREC_SHIFT) |\
|
|
(4 << TIMING_CFG1_WRREC_SHIFT) |\
|
|
(2 << TIMING_CFG1_ACTTOACT_SHIFT) |\
|
|
(2 << TIMING_CFG1_WRTORD_SHIFT))
|
|
#define CONFIG_SYS_DDR_TIMING_2 ((1 << TIMING_CFG2_ADD_LAT_SHIFT) |\
|
|
(5 << TIMING_CFG2_CPO_SHIFT) |\
|
|
(4 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) |\
|
|
(2 << TIMING_CFG2_RD_TO_PRE_SHIFT) |\
|
|
(0 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) |\
|
|
(1 << TIMING_CFG2_CKE_PLS_SHIFT) |\
|
|
(6 << TIMING_CFG2_FOUR_ACT_SHIFT))
|
|
|
|
#define CONFIG_SYS_DDR_INTERVAL ((0x800 << SDRAM_INTERVAL_REFINT_SHIFT) |\
|
|
(0x800 << SDRAM_INTERVAL_BSTOPRE_SHIFT))
|
|
|
|
#define CONFIG_SYS_SDRAM_CFG (SDRAM_CFG_SREN |\
|
|
SDRAM_CFG_2T_EN | SDRAM_CFG_HSE |\
|
|
SDRAM_CFG_DBW_32 |\
|
|
SDRAM_CFG_SDRAM_TYPE_DDR2)
|
|
|
|
#define CONFIG_SYS_SDRAM_CFG2 0x00401000
|
|
#define CONFIG_SYS_DDR_MODE ((0x0448 << SDRAM_MODE_ESD_SHIFT) |\
|
|
(0x0242 << SDRAM_MODE_SD_SHIFT))
|
|
#define CONFIG_SYS_DDR_MODE_2 0x00000000
|
|
#define CONFIG_SYS_DDR_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_075
|
|
#define CONFIG_SYS_DDRCDR_VALUE (DDRCDR_EN |\
|
|
DDRCDR_PZ_NOMZ |\
|
|
DDRCDR_NZ_NOMZ |\
|
|
DDRCDR_ODT |\
|
|
DDRCDR_M_ODR |\
|
|
DDRCDR_Q_DRN)
|
|
|
|
/*
|
|
* on-board devices
|
|
*/
|
|
#define CONFIG_TSEC1
|
|
#define CONFIG_TSEC2
|
|
#define CONFIG_TSEC_ENET
|
|
#define CONFIG_HARD_SPI
|
|
|
|
/*
|
|
* NOR FLASH setup
|
|
*/
|
|
#define CONFIG_SYS_FLASH_CFI
|
|
#define CONFIG_FLASH_CFI_DRIVER
|
|
#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_8BIT
|
|
#define CONFIG_FLASH_SHOW_PROGRESS 50
|
|
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
|
|
|
|
#define CONFIG_SYS_FLASH_BASE 0xFF800000
|
|
#define CONFIG_SYS_FLASH_SIZE 8
|
|
#define CONFIG_SYS_FLASH_PROTECTION
|
|
|
|
#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE
|
|
#define CONFIG_SYS_LBLAWAR0_PRELIM 0x80000016
|
|
|
|
#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE |\
|
|
BR_PS_8 |\
|
|
BR_MS_GPCM |\
|
|
BR_V)
|
|
|
|
#define CONFIG_SYS_OR0_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) |\
|
|
OR_GPCM_SCY_10 |\
|
|
OR_GPCM_EHTR |\
|
|
OR_GPCM_TRLX |\
|
|
OR_GPCM_CSNT |\
|
|
OR_GPCM_EAD)
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 1
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 128
|
|
|
|
#define CONFIG_SYS_FLASH_ERASE_TOUT 60000
|
|
#define CONFIG_SYS_FLASH_WRITE_TOUT 500
|
|
|
|
/*
|
|
* NAND FLASH setup
|
|
*/
|
|
#define CONFIG_SYS_NAND_BASE 0xE1000000
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
|
#define CONFIG_SYS_NAND_MAX_CHIPS 1
|
|
#define CONFIG_NAND_FSL_ELBC
|
|
#define CONFIG_SYS_NAND_PAGE_SIZE (2048)
|
|
#define CONFIG_SYS_NAND_BLOCK_SIZE (128 << 10)
|
|
#define NAND_CACHE_PAGES 64
|
|
|
|
#define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_NAND_BASE
|
|
#define CONFIG_SYS_LBLAWAR1_PRELIM 0x8000000E
|
|
#define CONFIG_SYS_NAND_LBLAWBAR_PRELIM CONFIG_SYS_LBLAWBAR1_PRELIM
|
|
#define CONFIG_SYS_NAND_LBLAWAR_PRELIM CONFIG_SYS_LBLAWAR1_PRELIM
|
|
|
|
#define CONFIG_SYS_BR1_PRELIM ((CONFIG_SYS_NAND_BASE) |\
|
|
(2<<BR_DECC_SHIFT) |\
|
|
BR_PS_8 |\
|
|
BR_MS_FCM |\
|
|
BR_V)
|
|
|
|
#define CONFIG_SYS_OR1_PRELIM (0xFFFF8000 |\
|
|
OR_FCM_PGS |\
|
|
OR_FCM_CSCT |\
|
|
OR_FCM_CST |\
|
|
OR_FCM_CHT |\
|
|
OR_FCM_SCY_4 |\
|
|
OR_FCM_TRLX |\
|
|
OR_FCM_EHTR |\
|
|
OR_FCM_RST)
|
|
|
|
/*
|
|
* MRAM setup
|
|
*/
|
|
#define CONFIG_SYS_MRAM_BASE 0xE2000000
|
|
#define CONFIG_SYS_MRAM_SIZE 0x20000 /* 128 Kb */
|
|
#define CONFIG_SYS_LBLAWBAR2_PRELIM CONFIG_SYS_MRAM_BASE
|
|
#define CONFIG_SYS_LBLAWAR2_PRELIM 0x80000010 /* 128 Kb */
|
|
|
|
#define CONFIG_SYS_OR_TIMING_MRAM
|
|
|
|
#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_MRAM_BASE |\
|
|
BR_PS_8 |\
|
|
BR_MS_GPCM |\
|
|
BR_V)
|
|
|
|
#define CONFIG_SYS_OR2_PRELIM 0xFFFE0C74
|
|
|
|
/*
|
|
* CPLD setup
|
|
*/
|
|
#define CONFIG_SYS_CPLD_BASE 0xE3000000
|
|
#define CONFIG_SYS_CPLD_SIZE 0x8000
|
|
#define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_CPLD_BASE
|
|
#define CONFIG_SYS_LBLAWAR3_PRELIM 0x8000000E
|
|
|
|
#define CONFIG_SYS_OR_TIMING_MRAM
|
|
|
|
#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_CPLD_BASE |\
|
|
BR_PS_8 |\
|
|
BR_MS_GPCM |\
|
|
BR_V)
|
|
|
|
#define CONFIG_SYS_OR3_PRELIM 0xFFFF8814
|
|
|
|
/*
|
|
* HW-Watchdog
|
|
*/
|
|
#define CONFIG_WATCHDOG 1
|
|
#define CONFIG_SYS_WATCHDOG_VALUE 0xFFFF
|
|
|
|
/*
|
|
* I2C setup
|
|
*/
|
|
#define CONFIG_SYS_I2C
|
|
#define CONFIG_SYS_I2C_FSL
|
|
#define CONFIG_SYS_FSL_I2C_SPEED 400000
|
|
#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F
|
|
#define CONFIG_SYS_FSL_I2C_OFFSET 0x3100
|
|
#define CONFIG_RTC_PCF8563
|
|
#define CONFIG_SYS_I2C_RTC_ADDR 0x51
|
|
|
|
/*
|
|
* SPI setup
|
|
*/
|
|
#ifdef CONFIG_HARD_SPI
|
|
#define CONFIG_SYS_GPIO1_PRELIM
|
|
#define CONFIG_SYS_GPIO1_DIR 0x00000001
|
|
#define CONFIG_SYS_GPIO1_DAT 0x00000001
|
|
#endif
|
|
|
|
/*
|
|
* Ethernet setup
|
|
*/
|
|
#ifdef CONFIG_TSEC1
|
|
#define CONFIG_HAS_ETH0
|
|
#define CONFIG_TSEC1_NAME "TSEC0"
|
|
#define CONFIG_SYS_TSEC1_OFFSET 0x24000
|
|
#define TSEC1_PHY_ADDR 0x1
|
|
#define TSEC1_FLAGS TSEC_GIGABIT
|
|
#define TSEC1_PHYIDX 0
|
|
#endif
|
|
|
|
#ifdef CONFIG_TSEC2
|
|
#define CONFIG_HAS_ETH1
|
|
#define CONFIG_TSEC2_NAME "TSEC1"
|
|
#define CONFIG_SYS_TSEC2_OFFSET 0x25000
|
|
#define TSEC2_PHY_ADDR 0x3
|
|
#define TSEC2_FLAGS TSEC_GIGABIT
|
|
#define TSEC2_PHYIDX 0
|
|
#endif
|
|
#define CONFIG_ETHPRIME "TSEC1"
|
|
|
|
/*
|
|
* Serial Port
|
|
*/
|
|
#define CONFIG_SYS_NS16550_SERIAL
|
|
#define CONFIG_SYS_NS16550_REG_SIZE 1
|
|
|
|
#define CONFIG_SYS_BAUDRATE_TABLE \
|
|
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
|
|
#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x4500)
|
|
#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x4600)
|
|
#define CONFIG_SYS_NS16550_CLK (CONFIG_83XX_CLKIN * 2)
|
|
|
|
#define CONFIG_HAS_FSL_DR_USB
|
|
#define CONFIG_SYS_SCCR_USBDRCM 3
|
|
|
|
/*
|
|
* BAT's
|
|
*/
|
|
#define CONFIG_HIGH_BATS
|
|
|
|
/* DDR @ 0x00000000 */
|
|
#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE |\
|
|
BATL_PP_10)
|
|
#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE |\
|
|
BATU_BL_256M |\
|
|
BATU_VS |\
|
|
BATU_VP)
|
|
#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L
|
|
#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
|
|
|
|
/* Initial RAM @ 0xFD000000 */
|
|
#define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR |\
|
|
BATL_PP_10 |\
|
|
BATL_GUARDEDSTORAGE)
|
|
#define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR |\
|
|
BATU_BL_256K |\
|
|
BATU_VS |\
|
|
BATU_VP)
|
|
#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
|
|
#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
|
|
|
|
/* FLASH @ 0xFF800000 */
|
|
#define CONFIG_SYS_IBAT2L (CONFIG_SYS_FLASH_BASE |\
|
|
BATL_PP_10 |\
|
|
BATL_GUARDEDSTORAGE)
|
|
#define CONFIG_SYS_IBAT2U (CONFIG_SYS_FLASH_BASE |\
|
|
BATU_BL_8M |\
|
|
BATU_VS |\
|
|
BATU_VP)
|
|
#define CONFIG_SYS_DBAT2L (CONFIG_SYS_FLASH_BASE |\
|
|
BATL_PP_10 |\
|
|
BATL_CACHEINHIBIT |\
|
|
BATL_GUARDEDSTORAGE)
|
|
#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
|
|
|
|
#define CONFIG_SYS_IBAT3L (0)
|
|
#define CONFIG_SYS_IBAT3U (0)
|
|
#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L
|
|
#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
|
|
|
|
#define CONFIG_SYS_IBAT4L (0)
|
|
#define CONFIG_SYS_IBAT4U (0)
|
|
#define CONFIG_SYS_DBAT4L CONFIG_SYS_IBAT4L
|
|
#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U
|
|
|
|
/* IMMRBAR @ 0xF0000000 */
|
|
#define CONFIG_SYS_IBAT5L (CONFIG_SYS_IMMR |\
|
|
BATL_PP_10 |\
|
|
BATL_CACHEINHIBIT |\
|
|
BATL_GUARDEDSTORAGE)
|
|
#define CONFIG_SYS_IBAT5U (CONFIG_SYS_IMMR |\
|
|
BATU_BL_128M |\
|
|
BATU_VS |\
|
|
BATU_VP)
|
|
#define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L
|
|
#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U
|
|
|
|
/* NAND-Flash @ 0xE1000000, MRAM @ 0xE2000000, CPLD @ 0xE3000000 */
|
|
#define CONFIG_SYS_IBAT6L (0xE0000000 |\
|
|
BATL_PP_10 |\
|
|
BATL_GUARDEDSTORAGE)
|
|
#define CONFIG_SYS_IBAT6U (0xE0000000 |\
|
|
BATU_BL_256M |\
|
|
BATU_VS |\
|
|
BATU_VP)
|
|
#define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L
|
|
#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U
|
|
|
|
#define CONFIG_SYS_IBAT7L (0)
|
|
#define CONFIG_SYS_IBAT7U (0)
|
|
#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L
|
|
#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U
|
|
|
|
/*
|
|
* U-Boot environment setup
|
|
*/
|
|
#define CONFIG_BOOTP_BOOTFILESIZE
|
|
|
|
/*
|
|
* The reserved memory
|
|
*/
|
|
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
|
|
#define CONFIG_SYS_MONITOR_LEN (768 * 1024)
|
|
#define CONFIG_SYS_MALLOC_LEN (8 * 1024 * 1024)
|
|
|
|
/*
|
|
* Environment Configuration
|
|
*/
|
|
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE \
|
|
+ CONFIG_SYS_MONITOR_LEN)
|
|
#define CONFIG_ENV_SIZE 0x20000
|
|
#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SIZE)
|
|
#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
|
|
|
|
#define CONFIG_NETDEV eth1
|
|
#define CONFIG_HOSTNAME ids8313
|
|
#define CONFIG_ROOTPATH "/opt/eldk-4.2/ppc_6xx"
|
|
#define CONFIG_BOOTFILE "ids8313/uImage"
|
|
#define CONFIG_UBOOTPATH "ids8313/u-boot.bin"
|
|
#define CONFIG_FDTFILE "ids8313/ids8313.dtb"
|
|
#define CONFIG_LOADADDR 0x400000
|
|
#define CONFIG_ENV_FLAGS_LIST_STATIC "ethaddr:mo,eth1addr:mo"
|
|
|
|
/* Initial Memory map for Linux*/
|
|
#define CONFIG_SYS_BOOTMAPSZ (256 << 20)
|
|
|
|
/*
|
|
* Miscellaneous configurable options
|
|
*/
|
|
#define CONFIG_SYS_CBSIZE 1024
|
|
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
|
|
|
|
#define CONFIG_SYS_MEMTEST_START 0x00001000
|
|
#define CONFIG_SYS_MEMTEST_END 0x00C00000
|
|
|
|
#define CONFIG_SYS_LOAD_ADDR 0x100000
|
|
#define CONFIG_MII
|
|
#define CONFIG_LOADS_ECHO
|
|
#define CONFIG_TIMESTAMP
|
|
#define CONFIG_PREBOOT "echo;" \
|
|
"echo Type \\\"run nfsboot\\\" " \
|
|
"to mount root filesystem over NFS;echo"
|
|
#define CONFIG_BOOTCOMMAND "run boot_cramfs"
|
|
#undef CONFIG_SYS_LOADS_BAUD_CHANGE
|
|
|
|
#define CONFIG_JFFS2_NAND
|
|
#define CONFIG_JFFS2_DEV "0"
|
|
|
|
/* mtdparts command line support */
|
|
#define CONFIG_FLASH_CFI_MTD
|
|
#define CONFIG_MTD_DEVICE
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"netdev=" __stringify(CONFIG_NETDEV) "\0" \
|
|
"ethprime=TSEC1\0" \
|
|
"uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \
|
|
"tftpflash=tftpboot ${loadaddr} ${uboot}; " \
|
|
"protect off " __stringify(CONFIG_SYS_TEXT_BASE) \
|
|
" +${filesize}; " \
|
|
"erase " __stringify(CONFIG_SYS_TEXT_BASE) \
|
|
" +${filesize}; " \
|
|
"cp.b ${loadaddr} " __stringify(CONFIG_SYS_TEXT_BASE) \
|
|
" ${filesize}; " \
|
|
"protect on " __stringify(CONFIG_SYS_TEXT_BASE) \
|
|
" +${filesize}; " \
|
|
"cmp.b ${loadaddr} " __stringify(CONFIG_SYS_TEXT_BASE) \
|
|
" ${filesize}\0" \
|
|
"console=ttyS0\0" \
|
|
"fdtaddr=0x780000\0" \
|
|
"kernel_addr=ff800000\0" \
|
|
"fdtfile=" __stringify(CONFIG_FDTFILE) "\0" \
|
|
"setbootargs=setenv bootargs " \
|
|
"root=${rootdev} rw console=${console}," \
|
|
"${baudrate} ${othbootargs}\0" \
|
|
"setipargs=setenv bootargs root=${rootdev} rw " \
|
|
"nfsroot=${serverip}:${rootpath} " \
|
|
"ip=${ipaddr}:${serverip}:${gatewayip}:" \
|
|
"${netmask}:${hostname}:${netdev}:off " \
|
|
"console=${console},${baudrate} ${othbootargs}\0" \
|
|
"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
|
|
"mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
|
|
"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
|
|
"\0"
|
|
|
|
#define CONFIG_NFSBOOTCOMMAND \
|
|
"setenv rootdev /dev/nfs;" \
|
|
"run setipargs;run addmtd;" \
|
|
"tftp ${loadaddr} ${bootfile};" \
|
|
"tftp ${fdtaddr} ${fdtfile};" \
|
|
"fdt addr ${fdtaddr};" \
|
|
"bootm ${loadaddr} - ${fdtaddr}"
|
|
|
|
/* UBI Support */
|
|
#define CONFIG_MTD_PARTITIONS
|
|
|
|
#define CONFIG_IMAGE_FORMAT_LEGACY
|
|
|
|
#endif /* __CONFIG_H */
|