u-boot-brain/board/freescale/m54455evb/m54455evb.c
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

215 lines
5.2 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2000-2003
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc.
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
*/
#include <common.h>
#include <pci.h>
#include <asm/immap.h>
#include <asm/io.h>
DECLARE_GLOBAL_DATA_PTR;
int checkboard(void)
{
puts("Board: ");
puts("Freescale M54455 EVB\n");
return 0;
};
int dram_init(void)
{
u32 dramsize;
#ifdef CONFIG_CF_SBF
/*
* Serial Boot: The dram is already initialized in start.S
* only require to return DRAM size
*/
dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000 >> 1;
#else
sdramc_t *sdram = (sdramc_t *)(MMAP_SDRAM);
gpio_t *gpio = (gpio_t *)(MMAP_GPIO);
u32 i;
dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000 >> 1;
for (i = 0x13; i < 0x20; i++) {
if (dramsize == (1 << i))
break;
}
i--;
out_8(&gpio->mscr_sdram, CONFIG_SYS_SDRAM_DRV_STRENGTH);
out_be32(&sdram->sdcs0, CONFIG_SYS_SDRAM_BASE | i);
out_be32(&sdram->sdcs1, CONFIG_SYS_SDRAM_BASE1 | i);
out_be32(&sdram->sdcfg1, CONFIG_SYS_SDRAM_CFG1);
out_be32(&sdram->sdcfg2, CONFIG_SYS_SDRAM_CFG2);
/* Issue PALL */
out_be32(&sdram->sdcr, CONFIG_SYS_SDRAM_CTRL | 2);
/* Issue LEMR */
out_be32(&sdram->sdmr, CONFIG_SYS_SDRAM_EMOD | 0x408);
out_be32(&sdram->sdmr, CONFIG_SYS_SDRAM_MODE | 0x300);
udelay(500);
/* Issue PALL */
out_be32(&sdram->sdcr, CONFIG_SYS_SDRAM_CTRL | 2);
/* Perform two refresh cycles */
out_be32(&sdram->sdcr, CONFIG_SYS_SDRAM_CTRL | 4);
out_be32(&sdram->sdcr, CONFIG_SYS_SDRAM_CTRL | 4);
out_be32(&sdram->sdmr, CONFIG_SYS_SDRAM_MODE | 0x200);
out_be32(&sdram->sdcr,
(CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000c00);
udelay(100);
#endif
gd->ram_size = dramsize << 1;
return 0;
};
int testdram(void)
{
/* TODO: XXX XXX XXX */
printf("DRAM test not implemented!\n");
return (0);
}
#if defined(CONFIG_IDE)
#include <ata.h>
int ide_preinit(void)
{
gpio_t *gpio = (gpio_t *) MMAP_GPIO;
u32 tmp;
tmp = (in_8(&gpio->par_fec) & GPIO_PAR_FEC_FEC1_UNMASK) | 0x10;
setbits_8(&gpio->par_fec, tmp);
tmp = ((in_be16(&gpio->par_feci2c) & 0xf0ff) |
(GPIO_PAR_FECI2C_MDC1_ATA_DIOR | GPIO_PAR_FECI2C_MDIO1_ATA_DIOW));
setbits_be16(&gpio->par_feci2c, tmp);
setbits_be16(&gpio->par_ata,
GPIO_PAR_ATA_BUFEN | GPIO_PAR_ATA_CS1 | GPIO_PAR_ATA_CS0 |
GPIO_PAR_ATA_DA2 | GPIO_PAR_ATA_DA1 | GPIO_PAR_ATA_DA0 |
GPIO_PAR_ATA_RESET_RESET | GPIO_PAR_ATA_DMARQ_DMARQ |
GPIO_PAR_ATA_IORDY_IORDY);
setbits_be16(&gpio->par_pci,
GPIO_PAR_PCI_GNT3_ATA_DMACK | GPIO_PAR_PCI_REQ3_ATA_INTRQ);
return (0);
}
void ide_set_reset(int idereset)
{
atac_t *ata = (atac_t *) MMAP_ATA;
long period;
/* t1, t2, t3, t4, t5, t6, t9, tRD, tA */
int piotms[5][9] = {
{70, 165, 60, 30, 50, 5, 20, 0, 35}, /* PIO 0 */
{50, 125, 45, 20, 35, 5, 15, 0, 35}, /* PIO 1 */
{30, 100, 30, 15, 20, 5, 10, 0, 35}, /* PIO 2 */
{30, 80, 30, 10, 20, 5, 10, 0, 35}, /* PIO 3 */
{25, 70, 20, 10, 20, 5, 10, 0, 35}
}; /* PIO 4 */
if (idereset) {
/* control reset */
out_8(&ata->cr, 0);
udelay(10000);
} else {
#define CALC_TIMING(t) (t + period - 1) / period
period = 1000000000 / gd->bus_clk; /* period in ns */
/*ata->ton = CALC_TIMING (180); */
out_8(&ata->t1, CALC_TIMING(piotms[2][0]));
out_8(&ata->t2w, CALC_TIMING(piotms[2][1]));
out_8(&ata->t2r, CALC_TIMING(piotms[2][1]));
out_8(&ata->ta, CALC_TIMING(piotms[2][8]));
out_8(&ata->trd, CALC_TIMING(piotms[2][7]));
out_8(&ata->t4, CALC_TIMING(piotms[2][3]));
out_8(&ata->t9, CALC_TIMING(piotms[2][6]));
/* IORDY enable */
out_8(&ata->cr, 0x40);
udelay(200000);
/* IORDY enable */
setbits_8(&ata->cr, 0x01);
}
}
#endif
#if defined(CONFIG_PCI)
/*
* Initialize PCI devices, report devices found.
*/
static struct pci_controller hose;
extern void pci_mcf5445x_init(struct pci_controller *hose);
void pci_init_board(void)
{
pci_mcf5445x_init(&hose);
}
#endif /* CONFIG_PCI */
#if defined(CONFIG_FLASH_CFI_LEGACY)
#include <flash.h>
ulong board_flash_get_legacy (ulong base, int banknum, flash_info_t * info)
{
int sect[] = CONFIG_SYS_ATMEL_SECT;
int sectsz[] = CONFIG_SYS_ATMEL_SECTSZ;
int i, j, k;
if (base != CONFIG_SYS_ATMEL_BASE)
return 0;
info->flash_id = 0x01000000;
info->portwidth = 1;
info->chipwidth = 1;
info->buffer_size = 1;
info->erase_blk_tout = 16384;
info->write_tout = 2;
info->buffer_write_tout = 5;
info->vendor = 0xFFF0; /* CFI_CMDSET_AMD_LEGACY */
info->cmd_reset = 0x00F0;
info->interface = FLASH_CFI_X8;
info->legacy_unlock = 0;
info->manufacturer_id = (u16) ATM_MANUFACT;
info->device_id = ATM_ID_LV040;
info->device_id2 = 0;
info->ext_addr = 0;
info->cfi_version = 0x3133;
info->cfi_offset = 0x0000;
info->addr_unlock1 = 0x00000555;
info->addr_unlock2 = 0x000002AA;
info->name = "CFI conformant";
info->size = 0;
info->sector_count = CONFIG_SYS_ATMEL_TOTALSECT;
info->start[0] = base;
for (k = 0, i = 0; i < CONFIG_SYS_ATMEL_REGION; i++) {
info->size += sect[i] * sectsz[i];
for (j = 0; j < sect[i]; j++, k++) {
info->start[k + 1] = info->start[k] + sectsz[i];
info->protect[k] = 0;
}
}
return 1;
}
#endif /* CONFIG_SYS_FLASH_CFI */