mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-21 01:18:52 +09:00
![Simon Glass](/assets/img/avatar_default.png)
A number of board function belong in init.h with the others. Move them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
298 lines
6.5 KiB
C
298 lines
6.5 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2015 Stefan Roese <sr@denx.de>
|
|
* Copyright (C) 2016 Mario Six <mario.six@gdsys.cc>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <init.h>
|
|
#include <miiphy.h>
|
|
#include <tpm-v1.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/cpu.h>
|
|
#include <asm-generic/gpio.h>
|
|
|
|
#include "../drivers/ddr/marvell/a38x/ddr3_init.h"
|
|
#include "../arch/arm/mach-mvebu/serdes/a38x/high_speed_env_spec.h"
|
|
|
|
#include "keyprogram.h"
|
|
#include "dt_helpers.h"
|
|
#include "hydra.h"
|
|
#include "ihs_phys.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#define DB_GP_88F68XX_GPP_OUT_ENA_LOW 0x7fffffff
|
|
#define DB_GP_88F68XX_GPP_OUT_ENA_MID 0xffffefff
|
|
|
|
#define DB_GP_88F68XX_GPP_OUT_VAL_LOW 0x0
|
|
#define DB_GP_88F68XX_GPP_OUT_VAL_MID 0x00001000
|
|
#define DB_GP_88F68XX_GPP_POL_LOW 0x0
|
|
#define DB_GP_88F68XX_GPP_POL_MID 0x0
|
|
|
|
static int get_tpm(struct udevice **devp)
|
|
{
|
|
int rc;
|
|
|
|
rc = uclass_first_device_err(UCLASS_TPM, devp);
|
|
if (rc) {
|
|
printf("Could not find TPM (ret=%d)\n", rc);
|
|
return CMD_RET_FAILURE;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Define the DDR layout / topology here in the board file. This will
|
|
* be used by the DDR3 init code in the SPL U-Boot version to configure
|
|
* the DDR3 controller.
|
|
*/
|
|
static struct mv_ddr_topology_map ddr_topology_map = {
|
|
DEBUG_LEVEL_ERROR,
|
|
0x1, /* active interfaces */
|
|
/* cs_mask, mirror, dqs_swap, ck_swap X PUPs */
|
|
{ { { {0x1, 0, 0, 0},
|
|
{0x1, 0, 0, 0},
|
|
{0x1, 0, 0, 0},
|
|
{0x1, 0, 0, 0},
|
|
{0x1, 0, 0, 0} },
|
|
SPEED_BIN_DDR_1600K, /* speed_bin */
|
|
MV_DDR_DEV_WIDTH_16BIT, /* memory_width */
|
|
MV_DDR_DIE_CAP_4GBIT, /* mem_size */
|
|
MV_DDR_FREQ_533, /* frequency */
|
|
0, 0, /* cas_wl cas_l */
|
|
MV_DDR_TEMP_LOW, /* temperature */
|
|
MV_DDR_TIM_DEFAULT} }, /* timing */
|
|
BUS_MASK_32BIT, /* Busses mask */
|
|
MV_DDR_CFG_DEFAULT, /* ddr configuration data source */
|
|
{ {0} }, /* raw spd data */
|
|
{0} /* timing parameters */
|
|
|
|
};
|
|
|
|
static struct serdes_map serdes_topology_map[] = {
|
|
{SGMII0, SERDES_SPEED_1_25_GBPS, SERDES_DEFAULT_MODE, 0, 0},
|
|
{USB3_HOST0, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0},
|
|
/* SATA tx polarity is inverted */
|
|
{SATA1, SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 0, 1},
|
|
{SGMII2, SERDES_SPEED_1_25_GBPS, SERDES_DEFAULT_MODE, 0, 0},
|
|
{DEFAULT_SERDES, SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 0, 0},
|
|
{PEX2, SERDES_SPEED_5_GBPS, PEX_ROOT_COMPLEX_X1, 0, 0}
|
|
};
|
|
|
|
int hws_board_topology_load(struct serdes_map **serdes_map_array, u8 *count)
|
|
{
|
|
*serdes_map_array = serdes_topology_map;
|
|
*count = ARRAY_SIZE(serdes_topology_map);
|
|
return 0;
|
|
}
|
|
|
|
void board_pex_config(void)
|
|
{
|
|
#ifdef CONFIG_SPL_BUILD
|
|
uint k;
|
|
struct gpio_desc gpio = {};
|
|
|
|
if (!request_gpio_by_name(&gpio, "pca9698@22", 31, "fpga-program-gpio")) {
|
|
/* prepare FPGA reconfiguration */
|
|
dm_gpio_set_dir_flags(&gpio, GPIOD_IS_OUT);
|
|
dm_gpio_set_value(&gpio, 0);
|
|
|
|
/* give lunatic PCIe clock some time to stabilize */
|
|
mdelay(500);
|
|
|
|
/* start FPGA reconfiguration */
|
|
dm_gpio_set_dir_flags(&gpio, GPIOD_IS_IN);
|
|
}
|
|
|
|
/* wait for FPGA done */
|
|
if (!request_gpio_by_name(&gpio, "pca9698@22", 19, "fpga-done-gpio")) {
|
|
for (k = 0; k < 20; ++k) {
|
|
if (dm_gpio_get_value(&gpio)) {
|
|
printf("FPGA done after %u rounds\n", k);
|
|
break;
|
|
}
|
|
mdelay(100);
|
|
}
|
|
}
|
|
|
|
/* disable FPGA reset */
|
|
if (!request_gpio_by_name(&gpio, "gpio@18100", 6, "cpu-to-fpga-reset")) {
|
|
dm_gpio_set_dir_flags(&gpio, GPIOD_IS_OUT);
|
|
dm_gpio_set_value(&gpio, 1);
|
|
}
|
|
|
|
/* wait for FPGA ready */
|
|
if (!request_gpio_by_name(&gpio, "pca9698@22", 27, "fpga-ready-gpio")) {
|
|
for (k = 0; k < 2; ++k) {
|
|
if (!dm_gpio_get_value(&gpio))
|
|
break;
|
|
mdelay(100);
|
|
}
|
|
}
|
|
#endif
|
|
}
|
|
|
|
struct mv_ddr_topology_map *mv_ddr_topology_map_get(void)
|
|
{
|
|
return &ddr_topology_map;
|
|
}
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
#ifdef CONFIG_SPL_BUILD
|
|
/* Configure MPP */
|
|
writel(0x00111111, MVEBU_MPP_BASE + 0x00);
|
|
writel(0x40040000, MVEBU_MPP_BASE + 0x04);
|
|
writel(0x00466444, MVEBU_MPP_BASE + 0x08);
|
|
writel(0x00043300, MVEBU_MPP_BASE + 0x0c);
|
|
writel(0x44400000, MVEBU_MPP_BASE + 0x10);
|
|
writel(0x20000334, MVEBU_MPP_BASE + 0x14);
|
|
writel(0x40000000, MVEBU_MPP_BASE + 0x18);
|
|
writel(0x00004444, MVEBU_MPP_BASE + 0x1c);
|
|
|
|
/* Set GPP Out value */
|
|
writel(DB_GP_88F68XX_GPP_OUT_VAL_LOW, MVEBU_GPIO0_BASE + 0x00);
|
|
writel(DB_GP_88F68XX_GPP_OUT_VAL_MID, MVEBU_GPIO1_BASE + 0x00);
|
|
|
|
/* Set GPP Polarity */
|
|
writel(DB_GP_88F68XX_GPP_POL_LOW, MVEBU_GPIO0_BASE + 0x0c);
|
|
writel(DB_GP_88F68XX_GPP_POL_MID, MVEBU_GPIO1_BASE + 0x0c);
|
|
|
|
/* Set GPP Out Enable */
|
|
writel(DB_GP_88F68XX_GPP_OUT_ENA_LOW, MVEBU_GPIO0_BASE + 0x04);
|
|
writel(DB_GP_88F68XX_GPP_OUT_ENA_MID, MVEBU_GPIO1_BASE + 0x04);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_init(void)
|
|
{
|
|
/* Address of boot parameters */
|
|
gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifndef CONFIG_SPL_BUILD
|
|
void init_host_phys(struct mii_dev *bus)
|
|
{
|
|
uint k;
|
|
|
|
for (k = 0; k < 2; ++k) {
|
|
struct phy_device *phydev;
|
|
|
|
phydev = phy_find_by_mask(bus, 1 << k,
|
|
PHY_INTERFACE_MODE_SGMII);
|
|
|
|
if (phydev)
|
|
phy_config(phydev);
|
|
}
|
|
}
|
|
|
|
int ccdc_eth_init(void)
|
|
{
|
|
uint k;
|
|
uint octo_phy_mask = 0;
|
|
int ret;
|
|
struct mii_dev *bus;
|
|
|
|
/* Init SoC's phys */
|
|
bus = miiphy_get_dev_by_name("ethernet@34000");
|
|
|
|
if (bus)
|
|
init_host_phys(bus);
|
|
|
|
bus = miiphy_get_dev_by_name("ethernet@70000");
|
|
|
|
if (bus)
|
|
init_host_phys(bus);
|
|
|
|
/* Init octo phys */
|
|
octo_phy_mask = calculate_octo_phy_mask();
|
|
|
|
printf("IHS PHYS: %08x", octo_phy_mask);
|
|
|
|
ret = init_octo_phys(octo_phy_mask);
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
printf("\n");
|
|
|
|
if (!get_fpga()) {
|
|
puts("fpga was NULL\n");
|
|
return 1;
|
|
}
|
|
|
|
/* reset all FPGA-QSGMII instances */
|
|
for (k = 0; k < 80; ++k)
|
|
writel(1 << 31, get_fpga()->qsgmii_port_state[k]);
|
|
|
|
udelay(100);
|
|
|
|
for (k = 0; k < 80; ++k)
|
|
writel(0, get_fpga()->qsgmii_port_state[k]);
|
|
return 0;
|
|
}
|
|
|
|
#endif
|
|
|
|
int board_late_init(void)
|
|
{
|
|
#ifndef CONFIG_SPL_BUILD
|
|
hydra_initialize();
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
int board_fix_fdt(void *rw_fdt_blob)
|
|
{
|
|
struct udevice *bus = NULL;
|
|
uint k;
|
|
char name[64];
|
|
int err;
|
|
|
|
err = uclass_get_device_by_name(UCLASS_I2C, "i2c@11000", &bus);
|
|
|
|
if (err) {
|
|
printf("Could not get I2C bus.\n");
|
|
return err;
|
|
}
|
|
|
|
for (k = 0x21; k <= 0x26; k++) {
|
|
snprintf(name, 64,
|
|
"/soc/internal-regs/i2c@11000/pca9698@%02x", k);
|
|
|
|
if (!dm_i2c_simple_probe(bus, k))
|
|
fdt_disable_by_ofname(rw_fdt_blob, name);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int last_stage_init(void)
|
|
{
|
|
struct udevice *tpm;
|
|
int ret;
|
|
|
|
#ifndef CONFIG_SPL_BUILD
|
|
ccdc_eth_init();
|
|
#endif
|
|
ret = get_tpm(&tpm);
|
|
if (ret || tpm_init(tpm) || tpm_startup(tpm, TPM_ST_CLEAR) ||
|
|
tpm_continue_self_test(tpm)) {
|
|
return 1;
|
|
}
|
|
|
|
mdelay(37);
|
|
|
|
flush_keys(tpm);
|
|
load_and_run_keyprog(tpm);
|
|
|
|
return 0;
|
|
}
|