u-boot-brain/drivers/serial/serial_pxa.c

/*
 * (C) Copyright 2002
 * Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
 *
 * (C) Copyright 2002
 * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
 * Marius Groeger <mgroeger@sysgo.de>
 *
 * (C) Copyright 2002
 * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
 * Alex Zuepke <azu@sysgo.de>
 *
 * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl)
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 *
 */

#include <common.h>
#include <watchdog.h>
#include <serial.h>
#include <asm/arch/pxa-regs.h>
#include <asm/io.h>

DECLARE_GLOBAL_DATA_PTR;

#define FFUART_INDEX	0
#define BTUART_INDEX	1
#define STUART_INDEX	2

#ifndef CONFIG_SERIAL_MULTI
#if defined (CONFIG_FFUART)
#define UART_INDEX	FFUART_INDEX
#elif defined (CONFIG_BTUART)
#define UART_INDEX	BTUART_INDEX
#elif defined (CONFIG_STUART)
#define UART_INDEX	STUART_INDEX
#else
#error "Bad: you didn't configure serial ..."
#endif
#endif

void pxa_setbrg_dev (unsigned int uart_index)
{
	unsigned int quot = 0;

	if (gd->baudrate == 1200)
		quot = 768;
	else if (gd->baudrate == 9600)
		quot = 96;
	else if (gd->baudrate == 19200)
		quot = 48;
	else if (gd->baudrate == 38400)
		quot = 24;
	else if (gd->baudrate == 57600)
		quot = 16;
	else if (gd->baudrate == 115200)
		quot = 8;
	else
		hang ();

	switch (uart_index) {
		case FFUART_INDEX:
#ifdef CONFIG_CPU_MONAHANS
			writel(readl(CKENA) | CKENA_22_FFUART, CKENA);
#else
			writel(readl(CKEN) | CKEN6_FFUART, CKEN);
#endif /* CONFIG_CPU_MONAHANS */

			writel(0, FFIER);	/* Disable for now */
			writel(0, FFFCR);	/* No fifos enabled */

			/* set baud rate */
			writel(LCR_WLS0 | LCR_WLS1 | LCR_DLAB, FFLCR);
			writel(quot & 0xff, FFDLL);
			writel(quot >> 8, FFDLH);
			writel(LCR_WLS0 | LCR_WLS1, FFLCR);

			writel(IER_UUE, FFIER);	/* Enable FFUART */
		break;

		case BTUART_INDEX:
#ifdef CONFIG_CPU_MONAHANS
			writel(readl(CKENA) | CKENA_21_BTUART, CKENA);
#else
			writel(readl(CKEN) | CKEN7_BTUART, CKEN);
#endif /*  CONFIG_CPU_MONAHANS */

			writel(0, BTIER);
			writel(0, BTFCR);

			/* set baud rate */
			writel(LCR_DLAB, BTLCR);
			writel(quot & 0xff, BTDLL);
			writel(quot >> 8, BTDLH);
			writel(LCR_WLS0 | LCR_WLS1, BTLCR);

			writel(IER_UUE, BTIER);	/* Enable BFUART */

		break;

		case STUART_INDEX:
#ifdef CONFIG_CPU_MONAHANS
			writel(readl(CKENA) | CKENA_23_STUART, CKENA);
#else
			writel(readl(CKEN) | CKEN5_STUART, CKEN);
#endif /* CONFIG_CPU_MONAHANS */

			writel(0, STIER);
			writel(0, STFCR);

			/* set baud rate */
			writel(LCR_DLAB, STLCR);
			writel(quot & 0xff, STDLL);
			writel(quot >> 8, STDLH);
			writel(LCR_WLS0 | LCR_WLS1, STLCR);

			writel(IER_UUE, STIER);	/* Enable STUART */
			break;

		default:
			hang();
	}
}


/*
 * Initialise the serial port with the given baudrate. The settings
 * are always 8 data bits, no parity, 1 stop bit, no start bits.
 *
 */
int pxa_init_dev (unsigned int uart_index)
{
	pxa_setbrg_dev (uart_index);

	return (0);
}


/*
 * Output a single byte to the serial port.
 */
void pxa_putc_dev (unsigned int uart_index,const char c)
{
	switch (uart_index) {
		case FFUART_INDEX:
		/* wait for room in the tx FIFO on FFUART */
			while ((readl(FFLSR) & LSR_TEMT) == 0)
				WATCHDOG_RESET ();	/* Reset HW Watchdog, if needed */
			writel(c, FFTHR);
			break;

		case BTUART_INDEX:
			while ((readl(BTLSR) & LSR_TEMT) == 0)
				WATCHDOG_RESET ();	/* Reset HW Watchdog, if needed */
			writel(c, BTTHR);
			break;

		case STUART_INDEX:
			while ((readl(STLSR) & LSR_TEMT) == 0)
				WATCHDOG_RESET ();	/* Reset HW Watchdog, if needed */
			writel(c, STTHR);
			break;
	}

	/* If \n, also do \r */
	if (c == '\n')
		pxa_putc_dev (uart_index,'\r');
}

/*
 * Read a single byte from the serial port. Returns 1 on success, 0
 * otherwise. When the function is succesfull, the character read is
 * written into its argument c.
 */
int pxa_tstc_dev (unsigned int uart_index)
{
	switch (uart_index) {
		case FFUART_INDEX:
			return readl(FFLSR) & LSR_DR;
		case BTUART_INDEX:
			return readl(BTLSR) & LSR_DR;
		case STUART_INDEX:
			return readl(STLSR) & LSR_DR;
	}
	return -1;
}

/*
 * Read a single byte from the serial port. Returns 1 on success, 0
 * otherwise. When the function is succesfull, the character read is
 * written into its argument c.
 */
int pxa_getc_dev (unsigned int uart_index)
{
	switch (uart_index) {
		case FFUART_INDEX:
			while (!(readl(FFLSR) & LSR_DR))
				/* Reset HW Watchdog, if needed */
				WATCHDOG_RESET();
			return (char) readl(FFRBR) & 0xff;

		case BTUART_INDEX:
			while (!(readl(BTLSR) & LSR_DR))
				/* Reset HW Watchdog, if needed */
				WATCHDOG_RESET();
			return (char) readl(BTRBR) & 0xff;
		case STUART_INDEX:
			while (!(readl(STLSR) & LSR_DR))
				/* Reset HW Watchdog, if needed */
				WATCHDOG_RESET();
			return (char) readl(STRBR) & 0xff;
	}
	return -1;
}

void
pxa_puts_dev (unsigned int uart_index,const char *s)
{
	while (*s) {
		pxa_putc_dev (uart_index,*s++);
	}
}

#if defined (CONFIG_FFUART)
static int ffuart_init(void)
{
	return pxa_init_dev(FFUART_INDEX);
}

static void ffuart_setbrg(void)
{
	return pxa_setbrg_dev(FFUART_INDEX);
}

static void ffuart_putc(const char c)
{
	return pxa_putc_dev(FFUART_INDEX,c);
}

static void ffuart_puts(const char *s)
{
	return pxa_puts_dev(FFUART_INDEX,s);
}

static int ffuart_getc(void)
{
	return pxa_getc_dev(FFUART_INDEX);
}

static int ffuart_tstc(void)
{
	return pxa_tstc_dev(FFUART_INDEX);
}

struct serial_device serial_ffuart_device =
{
	"serial_ffuart",
	ffuart_init,
	NULL,
	ffuart_setbrg,
	ffuart_getc,
	ffuart_tstc,
	ffuart_putc,
	ffuart_puts,
};
#endif

#if defined (CONFIG_BTUART)
static int btuart_init(void)
{
	return pxa_init_dev(BTUART_INDEX);
}

static void btuart_setbrg(void)
{
	return pxa_setbrg_dev(BTUART_INDEX);
}

static void btuart_putc(const char c)
{
	return pxa_putc_dev(BTUART_INDEX,c);
}

static void btuart_puts(const char *s)
{
	return pxa_puts_dev(BTUART_INDEX,s);
}

static int btuart_getc(void)
{
	return pxa_getc_dev(BTUART_INDEX);
}

static int btuart_tstc(void)
{
	return pxa_tstc_dev(BTUART_INDEX);
}

struct serial_device serial_btuart_device =
{
	"serial_btuart",
	btuart_init,
	NULL,
	btuart_setbrg,
	btuart_getc,
	btuart_tstc,
	btuart_putc,
	btuart_puts,
};
#endif

#if defined (CONFIG_STUART)
static int stuart_init(void)
{
	return pxa_init_dev(STUART_INDEX);
}

static void stuart_setbrg(void)
{
	return pxa_setbrg_dev(STUART_INDEX);
}

static void stuart_putc(const char c)
{
	return pxa_putc_dev(STUART_INDEX,c);
}

static void stuart_puts(const char *s)
{
	return pxa_puts_dev(STUART_INDEX,s);
}

static int stuart_getc(void)
{
	return pxa_getc_dev(STUART_INDEX);
}

static int stuart_tstc(void)
{
	return pxa_tstc_dev(STUART_INDEX);
}

struct serial_device serial_stuart_device =
{
	"serial_stuart",
	stuart_init,
	NULL,
	stuart_setbrg,
	stuart_getc,
	stuart_tstc,
	stuart_putc,
	stuart_puts,
};
#endif


#ifndef CONFIG_SERIAL_MULTI
inline int serial_init(void) {
	return (pxa_init_dev(UART_INDEX));
}
void serial_setbrg(void) {
	pxa_setbrg_dev(UART_INDEX);
}
int serial_getc(void) {
	return(pxa_getc_dev(UART_INDEX));
}
int serial_tstc(void) {
	return(pxa_tstc_dev(UART_INDEX));
}
void serial_putc(const char c) {
	pxa_putc_dev(UART_INDEX,c);
}
void serial_puts(const char *s) {
	pxa_puts_dev(UART_INDEX,s);
}
#endif	/* CONFIG_SERIAL_MULTI */