mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-20 17:08:52 +09:00
![Tom Rini](/assets/img/avatar_default.png)
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
365 lines
9.6 KiB
C
365 lines
9.6 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Aries M53 module
|
|
*
|
|
* Copyright (C) 2012-2013 Marek Vasut <marex@denx.de>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/imx-regs.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/arch/crm_regs.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/iomux-mx53.h>
|
|
#include <asm/mach-imx/mx5_video.h>
|
|
#include <asm/spl.h>
|
|
#include <linux/errno.h>
|
|
#include <netdev.h>
|
|
#include <i2c.h>
|
|
#include <mmc.h>
|
|
#include <spl.h>
|
|
#include <fsl_esdhc.h>
|
|
#include <asm/gpio.h>
|
|
#include <usb/ehci-ci.h>
|
|
#include <linux/fb.h>
|
|
#include <ipu_pixfmt.h>
|
|
|
|
/* Special MXCFB sync flags are here. */
|
|
#include "../drivers/video/mxcfb.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
static void setup_iomux_uart(void)
|
|
{
|
|
static const iomux_v3_cfg_t uart_pads[] = {
|
|
MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX,
|
|
MX53_PAD_PATA_DMARQ__UART2_TXD_MUX,
|
|
};
|
|
|
|
imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads));
|
|
}
|
|
|
|
#ifdef CONFIG_USB_EHCI_MX5
|
|
int board_ehci_hcd_init(int port)
|
|
{
|
|
if (port == 0) {
|
|
/* USB OTG PWRON */
|
|
imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX53_PAD_GPIO_4__GPIO1_4,
|
|
PAD_CTL_PKE | PAD_CTL_DSE_HIGH));
|
|
gpio_direction_output(IMX_GPIO_NR(1, 4), 0);
|
|
|
|
/* USB OTG Over Current */
|
|
imx_iomux_v3_setup_pad(MX53_PAD_GPIO_18__GPIO7_13);
|
|
} else if (port == 1) {
|
|
/* USB Host PWRON */
|
|
imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX53_PAD_GPIO_2__GPIO1_2,
|
|
PAD_CTL_PKE | PAD_CTL_DSE_HIGH));
|
|
gpio_direction_output(IMX_GPIO_NR(1, 2), 0);
|
|
|
|
/* USB Host Over Current */
|
|
imx_iomux_v3_setup_pad(MX53_PAD_GPIO_3__USBOH3_USBH1_OC);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static void setup_iomux_fec(void)
|
|
{
|
|
static const iomux_v3_cfg_t fec_pads[] = {
|
|
/* MDIO pads */
|
|
NEW_PAD_CTRL(MX53_PAD_FEC_MDIO__FEC_MDIO, PAD_CTL_HYS |
|
|
PAD_CTL_DSE_HIGH | PAD_CTL_PUS_22K_UP | PAD_CTL_ODE),
|
|
NEW_PAD_CTRL(MX53_PAD_FEC_MDC__FEC_MDC, PAD_CTL_DSE_HIGH),
|
|
|
|
/* FEC 0 pads */
|
|
NEW_PAD_CTRL(MX53_PAD_FEC_CRS_DV__FEC_RX_DV,
|
|
PAD_CTL_HYS | PAD_CTL_PKE),
|
|
NEW_PAD_CTRL(MX53_PAD_FEC_REF_CLK__FEC_TX_CLK,
|
|
PAD_CTL_HYS | PAD_CTL_PKE),
|
|
NEW_PAD_CTRL(MX53_PAD_FEC_RX_ER__FEC_RX_ER,
|
|
PAD_CTL_HYS | PAD_CTL_PKE),
|
|
NEW_PAD_CTRL(MX53_PAD_FEC_TX_EN__FEC_TX_EN, PAD_CTL_DSE_HIGH),
|
|
NEW_PAD_CTRL(MX53_PAD_FEC_RXD0__FEC_RDATA_0,
|
|
PAD_CTL_HYS | PAD_CTL_PKE),
|
|
NEW_PAD_CTRL(MX53_PAD_FEC_RXD1__FEC_RDATA_1,
|
|
PAD_CTL_HYS | PAD_CTL_PKE),
|
|
NEW_PAD_CTRL(MX53_PAD_FEC_TXD0__FEC_TDATA_0, PAD_CTL_DSE_HIGH),
|
|
NEW_PAD_CTRL(MX53_PAD_FEC_TXD1__FEC_TDATA_1, PAD_CTL_DSE_HIGH),
|
|
|
|
/* FEC 1 pads */
|
|
NEW_PAD_CTRL(MX53_PAD_KEY_COL0__FEC_RDATA_3,
|
|
PAD_CTL_HYS | PAD_CTL_PKE),
|
|
NEW_PAD_CTRL(MX53_PAD_KEY_ROW0__FEC_TX_ER,
|
|
PAD_CTL_HYS | PAD_CTL_PKE),
|
|
NEW_PAD_CTRL(MX53_PAD_KEY_COL1__FEC_RX_CLK,
|
|
PAD_CTL_HYS | PAD_CTL_PKE),
|
|
NEW_PAD_CTRL(MX53_PAD_KEY_ROW1__FEC_COL,
|
|
PAD_CTL_HYS | PAD_CTL_PKE),
|
|
NEW_PAD_CTRL(MX53_PAD_KEY_COL2__FEC_RDATA_2,
|
|
PAD_CTL_HYS | PAD_CTL_PKE),
|
|
NEW_PAD_CTRL(MX53_PAD_KEY_ROW2__FEC_TDATA_2, PAD_CTL_DSE_HIGH),
|
|
NEW_PAD_CTRL(MX53_PAD_KEY_COL3__FEC_CRS,
|
|
PAD_CTL_HYS | PAD_CTL_PKE),
|
|
NEW_PAD_CTRL(MX53_PAD_GPIO_19__FEC_TDATA_3, PAD_CTL_DSE_HIGH),
|
|
};
|
|
|
|
imx_iomux_v3_setup_multiple_pads(fec_pads, ARRAY_SIZE(fec_pads));
|
|
}
|
|
|
|
#ifdef CONFIG_FSL_ESDHC
|
|
struct fsl_esdhc_cfg esdhc_cfg = {
|
|
MMC_SDHC1_BASE_ADDR,
|
|
};
|
|
|
|
int board_mmc_getcd(struct mmc *mmc)
|
|
{
|
|
imx_iomux_v3_setup_pad(MX53_PAD_GPIO_1__GPIO1_1);
|
|
gpio_direction_input(IMX_GPIO_NR(1, 1));
|
|
|
|
return !gpio_get_value(IMX_GPIO_NR(1, 1));
|
|
}
|
|
|
|
#define SD_CMD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \
|
|
PAD_CTL_PUS_100K_UP)
|
|
#define SD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_47K_UP | \
|
|
PAD_CTL_DSE_HIGH)
|
|
|
|
int board_mmc_init(bd_t *bis)
|
|
{
|
|
static const iomux_v3_cfg_t sd1_pads[] = {
|
|
NEW_PAD_CTRL(MX53_PAD_SD1_CMD__ESDHC1_CMD, SD_CMD_PAD_CTRL),
|
|
NEW_PAD_CTRL(MX53_PAD_SD1_CLK__ESDHC1_CLK, SD_PAD_CTRL),
|
|
NEW_PAD_CTRL(MX53_PAD_SD1_DATA0__ESDHC1_DAT0, SD_PAD_CTRL),
|
|
NEW_PAD_CTRL(MX53_PAD_SD1_DATA1__ESDHC1_DAT1, SD_PAD_CTRL),
|
|
NEW_PAD_CTRL(MX53_PAD_SD1_DATA2__ESDHC1_DAT2, SD_PAD_CTRL),
|
|
NEW_PAD_CTRL(MX53_PAD_SD1_DATA3__ESDHC1_DAT3, SD_PAD_CTRL),
|
|
MX53_PAD_EIM_DA13__GPIO3_13,
|
|
|
|
MX53_PAD_EIM_EB3__GPIO2_31, /* SD power */
|
|
};
|
|
|
|
esdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
|
|
|
|
imx_iomux_v3_setup_multiple_pads(sd1_pads, ARRAY_SIZE(sd1_pads));
|
|
|
|
/* GPIO 2_31 is SD power */
|
|
gpio_direction_output(IMX_GPIO_NR(2, 31), 0);
|
|
|
|
return fsl_esdhc_initialize(bis, &esdhc_cfg);
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_VIDEO
|
|
static struct fb_videomode const ampire_wvga = {
|
|
.name = "Ampire",
|
|
.refresh = 60,
|
|
.xres = 800,
|
|
.yres = 480,
|
|
.pixclock = 29851, /* picosecond (33.5 MHz) */
|
|
.left_margin = 89,
|
|
.right_margin = 164,
|
|
.upper_margin = 23,
|
|
.lower_margin = 10,
|
|
.hsync_len = 10,
|
|
.vsync_len = 10,
|
|
.sync = FB_SYNC_CLK_LAT_FALL,
|
|
};
|
|
|
|
int board_video_skip(void)
|
|
{
|
|
int ret;
|
|
ret = ipuv3_fb_init(&ire_wvga, 1, IPU_PIX_FMT_RGB666);
|
|
if (ret)
|
|
printf("Ampire LCD cannot be configured: %d\n", ret);
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
#define I2C_PAD_CTRL (PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | \
|
|
PAD_CTL_PUS_100K_UP | PAD_CTL_ODE)
|
|
|
|
static void setup_iomux_i2c(void)
|
|
{
|
|
static const iomux_v3_cfg_t i2c_pads[] = {
|
|
NEW_PAD_CTRL(MX53_PAD_EIM_D16__I2C2_SDA, I2C_PAD_CTRL),
|
|
NEW_PAD_CTRL(MX53_PAD_EIM_EB2__I2C2_SCL, I2C_PAD_CTRL),
|
|
};
|
|
|
|
imx_iomux_v3_setup_multiple_pads(i2c_pads, ARRAY_SIZE(i2c_pads));
|
|
}
|
|
|
|
static void setup_iomux_video(void)
|
|
{
|
|
static const iomux_v3_cfg_t lcd_pads[] = {
|
|
MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0,
|
|
MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1,
|
|
MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2,
|
|
MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3,
|
|
MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4,
|
|
MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5,
|
|
MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6,
|
|
MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7,
|
|
MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8,
|
|
MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9,
|
|
MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10,
|
|
MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11,
|
|
MX53_PAD_EIM_A17__IPU_DISP1_DAT_12,
|
|
MX53_PAD_EIM_A18__IPU_DISP1_DAT_13,
|
|
MX53_PAD_EIM_A19__IPU_DISP1_DAT_14,
|
|
MX53_PAD_EIM_A20__IPU_DISP1_DAT_15,
|
|
MX53_PAD_EIM_A21__IPU_DISP1_DAT_16,
|
|
MX53_PAD_EIM_A22__IPU_DISP1_DAT_17,
|
|
MX53_PAD_EIM_A23__IPU_DISP1_DAT_18,
|
|
MX53_PAD_EIM_A24__IPU_DISP1_DAT_19,
|
|
MX53_PAD_EIM_D31__IPU_DISP1_DAT_20,
|
|
MX53_PAD_EIM_D30__IPU_DISP1_DAT_21,
|
|
MX53_PAD_EIM_D26__IPU_DISP1_DAT_22,
|
|
MX53_PAD_EIM_D27__IPU_DISP1_DAT_23,
|
|
MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK,
|
|
MX53_PAD_EIM_DA13__IPU_DI1_D0_CS,
|
|
MX53_PAD_EIM_DA14__IPU_DI1_D1_CS,
|
|
MX53_PAD_EIM_DA15__IPU_DI1_PIN1,
|
|
MX53_PAD_EIM_DA11__IPU_DI1_PIN2,
|
|
MX53_PAD_EIM_DA12__IPU_DI1_PIN3,
|
|
MX53_PAD_EIM_A25__IPU_DI1_PIN12,
|
|
MX53_PAD_EIM_DA10__IPU_DI1_PIN15,
|
|
};
|
|
|
|
imx_iomux_v3_setup_multiple_pads(lcd_pads, ARRAY_SIZE(lcd_pads));
|
|
}
|
|
|
|
static void setup_iomux_nand(void)
|
|
{
|
|
static const iomux_v3_cfg_t nand_pads[] = {
|
|
NEW_PAD_CTRL(MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B,
|
|
PAD_CTL_DSE_HIGH),
|
|
NEW_PAD_CTRL(MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B,
|
|
PAD_CTL_DSE_HIGH),
|
|
NEW_PAD_CTRL(MX53_PAD_NANDF_CLE__EMI_NANDF_CLE,
|
|
PAD_CTL_DSE_HIGH),
|
|
NEW_PAD_CTRL(MX53_PAD_NANDF_ALE__EMI_NANDF_ALE,
|
|
PAD_CTL_DSE_HIGH),
|
|
NEW_PAD_CTRL(MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B,
|
|
PAD_CTL_PUS_100K_UP),
|
|
NEW_PAD_CTRL(MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0,
|
|
PAD_CTL_PUS_100K_UP),
|
|
NEW_PAD_CTRL(MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0,
|
|
PAD_CTL_DSE_HIGH),
|
|
NEW_PAD_CTRL(MX53_PAD_PATA_DATA0__EMI_NANDF_D_0,
|
|
PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
|
|
NEW_PAD_CTRL(MX53_PAD_PATA_DATA1__EMI_NANDF_D_1,
|
|
PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
|
|
NEW_PAD_CTRL(MX53_PAD_PATA_DATA2__EMI_NANDF_D_2,
|
|
PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
|
|
NEW_PAD_CTRL(MX53_PAD_PATA_DATA3__EMI_NANDF_D_3,
|
|
PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
|
|
NEW_PAD_CTRL(MX53_PAD_PATA_DATA4__EMI_NANDF_D_4,
|
|
PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
|
|
NEW_PAD_CTRL(MX53_PAD_PATA_DATA5__EMI_NANDF_D_5,
|
|
PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
|
|
NEW_PAD_CTRL(MX53_PAD_PATA_DATA6__EMI_NANDF_D_6,
|
|
PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
|
|
NEW_PAD_CTRL(MX53_PAD_PATA_DATA7__EMI_NANDF_D_7,
|
|
PAD_CTL_DSE_HIGH | PAD_CTL_PKE),
|
|
};
|
|
|
|
imx_iomux_v3_setup_multiple_pads(nand_pads, ARRAY_SIZE(nand_pads));
|
|
}
|
|
|
|
static void m53_set_clock(void)
|
|
{
|
|
int ret;
|
|
const uint32_t ref_clk = MXC_HCLK;
|
|
const uint32_t dramclk = 400;
|
|
uint32_t cpuclk;
|
|
|
|
imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX53_PAD_GPIO_10__GPIO4_0,
|
|
PAD_CTL_DSE_HIGH | PAD_CTL_PKE));
|
|
gpio_direction_input(IMX_GPIO_NR(4, 0));
|
|
|
|
/* GPIO10 selects modules' CPU speed, 1 = 1200MHz ; 0 = 800MHz */
|
|
cpuclk = gpio_get_value(IMX_GPIO_NR(4, 0)) ? 1200 : 800;
|
|
|
|
ret = mxc_set_clock(ref_clk, cpuclk, MXC_ARM_CLK);
|
|
if (ret)
|
|
printf("CPU: Switch CPU clock to %dMHz failed\n", cpuclk);
|
|
|
|
ret = mxc_set_clock(ref_clk, dramclk, MXC_PERIPH_CLK);
|
|
if (ret) {
|
|
printf("CPU: Switch peripheral clock to %dMHz failed\n",
|
|
dramclk);
|
|
}
|
|
|
|
ret = mxc_set_clock(ref_clk, dramclk, MXC_DDR_CLK);
|
|
if (ret)
|
|
printf("CPU: Switch DDR clock to %dMHz failed\n", dramclk);
|
|
}
|
|
|
|
static void m53_set_nand(void)
|
|
{
|
|
u32 i;
|
|
|
|
/* NAND flash is muxed on ATA pins */
|
|
setbits_le32(M4IF_BASE_ADDR + 0xc, M4IF_GENP_WEIM_MM_MASK);
|
|
|
|
/* Wait for Grant/Ack sequence (see EIM_CSnGCR2:MUX16_BYP_GRANT) */
|
|
for (i = 0x4; i < 0x94; i += 0x18) {
|
|
clrbits_le32(WEIM_BASE_ADDR + i,
|
|
WEIM_GCR2_MUX16_BYP_GRANT_MASK);
|
|
}
|
|
|
|
mxc_set_clock(0, 33, MXC_NFC_CLK);
|
|
enable_nfc_clk(1);
|
|
}
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
setup_iomux_uart();
|
|
setup_iomux_fec();
|
|
setup_iomux_i2c();
|
|
setup_iomux_nand();
|
|
setup_iomux_video();
|
|
|
|
m53_set_clock();
|
|
|
|
mxc_set_sata_internal_clock();
|
|
|
|
/* NAND clock @ 33MHz */
|
|
m53_set_nand();
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_init(void)
|
|
{
|
|
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int checkboard(void)
|
|
{
|
|
puts("Board: Aries M53EVK\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* NAND SPL
|
|
*/
|
|
#ifdef CONFIG_SPL_BUILD
|
|
void spl_board_init(void)
|
|
{
|
|
setup_iomux_nand();
|
|
m53_set_clock();
|
|
m53_set_nand();
|
|
}
|
|
|
|
u32 spl_boot_device(void)
|
|
{
|
|
return BOOT_DEVICE_NAND;
|
|
}
|
|
#endif
|