u-boot-brain/drivers/net/fsl_mcdmafec.c
Joe Hershberger 10cbe3b6a4 net: Fix remaining API interface breakage
These are all the files which use the API incorrectly but did not get
built using MAKEALL -a powerpc|arm.  I have no compiler for them, but
the remaining issues should be far less than without this patch.

Any outstanding issues are left to the maintainers of boards that use
these drivers.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
2012-05-23 14:19:21 -05:00

588 lines
16 KiB
C

/*
* (C) Copyright 2000-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* (C) Copyright 2007 Freescale Semiconductor, Inc.
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <malloc.h>
#include <command.h>
#include <config.h>
#include <net.h>
#include <miiphy.h>
#undef ET_DEBUG
#undef MII_DEBUG
/* Ethernet Transmit and Receive Buffers */
#define DBUF_LENGTH 1520
#define PKT_MAXBUF_SIZE 1518
#define PKT_MINBUF_SIZE 64
#define PKT_MAXBLR_SIZE 1536
#define LAST_PKTBUFSRX PKTBUFSRX - 1
#define BD_ENET_RX_W_E (BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY)
#define BD_ENET_TX_RDY_LST (BD_ENET_TX_READY | BD_ENET_TX_LAST)
#define FIFO_ERRSTAT (FIFO_STAT_RXW | FIFO_STAT_UF | FIFO_STAT_OF)
/* RxBD bits definitions */
#define BD_ENET_RX_ERR (BD_ENET_RX_LG | BD_ENET_RX_NO | BD_ENET_RX_CR | \
BD_ENET_RX_OV | BD_ENET_RX_TR)
#include <asm/immap.h>
#include <asm/fsl_mcdmafec.h>
#include "MCD_dma.h"
DECLARE_GLOBAL_DATA_PTR;
struct fec_info_dma fec_info[] = {
#ifdef CONFIG_SYS_FEC0_IOBASE
{
0, /* index */
CONFIG_SYS_FEC0_IOBASE, /* io base */
CONFIG_SYS_FEC0_PINMUX, /* gpio pin muxing */
CONFIG_SYS_FEC0_MIIBASE, /* mii base */
-1, /* phy_addr */
0, /* duplex and speed */
0, /* phy name */
0, /* phyname init */
0, /* RX BD */
0, /* TX BD */
0, /* rx Index */
0, /* tx Index */
0, /* tx buffer */
0, /* initialized flag */
(struct fec_info_dma *)-1, /* next */
FEC0_RX_TASK, /* rxTask */
FEC0_TX_TASK, /* txTask */
FEC0_RX_PRIORITY, /* rxPri */
FEC0_TX_PRIORITY, /* txPri */
FEC0_RX_INIT, /* rxInit */
FEC0_TX_INIT, /* txInit */
0, /* usedTbdIndex */
0, /* cleanTbdNum */
},
#endif
#ifdef CONFIG_SYS_FEC1_IOBASE
{
1, /* index */
CONFIG_SYS_FEC1_IOBASE, /* io base */
CONFIG_SYS_FEC1_PINMUX, /* gpio pin muxing */
CONFIG_SYS_FEC1_MIIBASE, /* mii base */
-1, /* phy_addr */
0, /* duplex and speed */
0, /* phy name */
0, /* phy name init */
#ifdef CONFIG_SYS_DMA_USE_INTSRAM
(cbd_t *)DBUF_LENGTH, /* RX BD */
#else
0, /* RX BD */
#endif
0, /* TX BD */
0, /* rx Index */
0, /* tx Index */
0, /* tx buffer */
0, /* initialized flag */
(struct fec_info_dma *)-1, /* next */
FEC1_RX_TASK, /* rxTask */
FEC1_TX_TASK, /* txTask */
FEC1_RX_PRIORITY, /* rxPri */
FEC1_TX_PRIORITY, /* txPri */
FEC1_RX_INIT, /* rxInit */
FEC1_TX_INIT, /* txInit */
0, /* usedTbdIndex */
0, /* cleanTbdNum */
}
#endif
};
static int fec_send(struct eth_device *dev, void *packet, int length);
static int fec_recv(struct eth_device *dev);
static int fec_init(struct eth_device *dev, bd_t * bd);
static void fec_halt(struct eth_device *dev);
#ifdef ET_DEBUG
static void dbg_fec_regs(struct eth_device *dev)
{
struct fec_info_dma *info = dev->priv;
volatile fecdma_t *fecp = (fecdma_t *) (info->iobase);
printf("=====\n");
printf("ievent %x - %x\n", (int)&fecp->eir, fecp->eir);
printf("imask %x - %x\n", (int)&fecp->eimr, fecp->eimr);
printf("ecntrl %x - %x\n", (int)&fecp->ecr, fecp->ecr);
printf("mii_mframe %x - %x\n", (int)&fecp->mmfr, fecp->mmfr);
printf("mii_speed %x - %x\n", (int)&fecp->mscr, fecp->mscr);
printf("mii_ctrlstat %x - %x\n", (int)&fecp->mibc, fecp->mibc);
printf("r_cntrl %x - %x\n", (int)&fecp->rcr, fecp->rcr);
printf("r hash %x - %x\n", (int)&fecp->rhr, fecp->rhr);
printf("x_cntrl %x - %x\n", (int)&fecp->tcr, fecp->tcr);
printf("padr_l %x - %x\n", (int)&fecp->palr, fecp->palr);
printf("padr_u %x - %x\n", (int)&fecp->paur, fecp->paur);
printf("op_pause %x - %x\n", (int)&fecp->opd, fecp->opd);
printf("iadr_u %x - %x\n", (int)&fecp->iaur, fecp->iaur);
printf("iadr_l %x - %x\n", (int)&fecp->ialr, fecp->ialr);
printf("gadr_u %x - %x\n", (int)&fecp->gaur, fecp->gaur);
printf("gadr_l %x - %x\n", (int)&fecp->galr, fecp->galr);
printf("x_wmrk %x - %x\n", (int)&fecp->tfwr, fecp->tfwr);
printf("r_fdata %x - %x\n", (int)&fecp->rfdr, fecp->rfdr);
printf("r_fstat %x - %x\n", (int)&fecp->rfsr, fecp->rfsr);
printf("r_fctrl %x - %x\n", (int)&fecp->rfcr, fecp->rfcr);
printf("r_flrfp %x - %x\n", (int)&fecp->rlrfp, fecp->rlrfp);
printf("r_flwfp %x - %x\n", (int)&fecp->rlwfp, fecp->rlwfp);
printf("r_frfar %x - %x\n", (int)&fecp->rfar, fecp->rfar);
printf("r_frfrp %x - %x\n", (int)&fecp->rfrp, fecp->rfrp);
printf("r_frfwp %x - %x\n", (int)&fecp->rfwp, fecp->rfwp);
printf("t_fdata %x - %x\n", (int)&fecp->tfdr, fecp->tfdr);
printf("t_fstat %x - %x\n", (int)&fecp->tfsr, fecp->tfsr);
printf("t_fctrl %x - %x\n", (int)&fecp->tfcr, fecp->tfcr);
printf("t_flrfp %x - %x\n", (int)&fecp->tlrfp, fecp->tlrfp);
printf("t_flwfp %x - %x\n", (int)&fecp->tlwfp, fecp->tlwfp);
printf("t_ftfar %x - %x\n", (int)&fecp->tfar, fecp->tfar);
printf("t_ftfrp %x - %x\n", (int)&fecp->tfrp, fecp->tfrp);
printf("t_ftfwp %x - %x\n", (int)&fecp->tfwp, fecp->tfwp);
printf("frst %x - %x\n", (int)&fecp->frst, fecp->frst);
printf("ctcwr %x - %x\n", (int)&fecp->ctcwr, fecp->ctcwr);
}
#endif
static void set_fec_duplex_speed(volatile fecdma_t * fecp, bd_t * bd,
int dup_spd)
{
if ((dup_spd >> 16) == FULL) {
/* Set maximum frame length */
fecp->rcr = FEC_RCR_MAX_FL(PKT_MAXBUF_SIZE) | FEC_RCR_MII_MODE |
FEC_RCR_PROM | 0x100;
fecp->tcr = FEC_TCR_FDEN;
} else {
/* Half duplex mode */
fecp->rcr = FEC_RCR_MAX_FL(PKT_MAXBUF_SIZE) |
FEC_RCR_MII_MODE | FEC_RCR_DRT;
fecp->tcr &= ~FEC_TCR_FDEN;
}
if ((dup_spd & 0xFFFF) == _100BASET) {
#ifdef MII_DEBUG
printf("100Mbps\n");
#endif
bd->bi_ethspeed = 100;
} else {
#ifdef MII_DEBUG
printf("10Mbps\n");
#endif
bd->bi_ethspeed = 10;
}
}
static int fec_send(struct eth_device *dev, void *packet, int length)
{
struct fec_info_dma *info = dev->priv;
cbd_t *pTbd, *pUsedTbd;
u16 phyStatus;
miiphy_read(dev->name, info->phy_addr, MII_BMSR, &phyStatus);
/* process all the consumed TBDs */
while (info->cleanTbdNum < CONFIG_SYS_TX_ETH_BUFFER) {
pUsedTbd = &info->txbd[info->usedTbdIdx];
if (pUsedTbd->cbd_sc & BD_ENET_TX_READY) {
#ifdef ET_DEBUG
printf("Cannot clean TBD %d, in use\n",
info->cleanTbdNum);
#endif
return 0;
}
/* clean this buffer descriptor */
if (info->usedTbdIdx == (CONFIG_SYS_TX_ETH_BUFFER - 1))
pUsedTbd->cbd_sc = BD_ENET_TX_WRAP;
else
pUsedTbd->cbd_sc = 0;
/* update some indeces for a correct handling of the TBD ring */
info->cleanTbdNum++;
info->usedTbdIdx = (info->usedTbdIdx + 1) % CONFIG_SYS_TX_ETH_BUFFER;
}
/* Check for valid length of data. */
if ((length > 1500) || (length <= 0)) {
return -1;
}
/* Check the number of vacant TxBDs. */
if (info->cleanTbdNum < 1) {
printf("No available TxBDs ...\n");
return -1;
}
/* Get the first TxBD to send the mac header */
pTbd = &info->txbd[info->txIdx];
pTbd->cbd_datlen = length;
pTbd->cbd_bufaddr = (u32) packet;
pTbd->cbd_sc |= BD_ENET_TX_LAST | BD_ENET_TX_TC | BD_ENET_TX_READY;
info->txIdx = (info->txIdx + 1) % CONFIG_SYS_TX_ETH_BUFFER;
/* Enable DMA transmit task */
MCD_continDma(info->txTask);
info->cleanTbdNum -= 1;
/* wait until frame is sent . */
while (pTbd->cbd_sc & BD_ENET_TX_READY) {
udelay(10);
}
return (int)(info->txbd[info->txIdx].cbd_sc & BD_ENET_TX_STATS);
}
static int fec_recv(struct eth_device *dev)
{
struct fec_info_dma *info = dev->priv;
volatile fecdma_t *fecp = (fecdma_t *) (info->iobase);
cbd_t *pRbd = &info->rxbd[info->rxIdx];
u32 ievent;
int frame_length, len = 0;
/* Check if any critical events have happened */
ievent = fecp->eir;
if (ievent != 0) {
fecp->eir = ievent;
if (ievent & (FEC_EIR_BABT | FEC_EIR_TXERR | FEC_EIR_RXERR)) {
printf("fec_recv: error\n");
fec_halt(dev);
fec_init(dev, NULL);
return 0;
}
if (ievent & FEC_EIR_HBERR) {
/* Heartbeat error */
fecp->tcr |= FEC_TCR_GTS;
}
if (ievent & FEC_EIR_GRA) {
/* Graceful stop complete */
if (fecp->tcr & FEC_TCR_GTS) {
printf("fec_recv: tcr_gts\n");
fec_halt(dev);
fecp->tcr &= ~FEC_TCR_GTS;
fec_init(dev, NULL);
}
}
}
if (!(pRbd->cbd_sc & BD_ENET_RX_EMPTY)) {
if ((pRbd->cbd_sc & BD_ENET_RX_LAST)
&& !(pRbd->cbd_sc & BD_ENET_RX_ERR)
&& ((pRbd->cbd_datlen - 4) > 14)) {
/* Get buffer address and size */
frame_length = pRbd->cbd_datlen - 4;
/* Fill the buffer and pass it to upper layers */
NetReceive((uchar *)pRbd->cbd_bufaddr, frame_length);
len = frame_length;
}
/* Reset buffer descriptor as empty */
if ((info->rxIdx) == (PKTBUFSRX - 1))
pRbd->cbd_sc = (BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY);
else
pRbd->cbd_sc = BD_ENET_RX_EMPTY;
pRbd->cbd_datlen = PKTSIZE_ALIGN;
/* Now, we have an empty RxBD, restart the DMA receive task */
MCD_continDma(info->rxTask);
/* Increment BD count */
info->rxIdx = (info->rxIdx + 1) % PKTBUFSRX;
}
return len;
}
static void fec_set_hwaddr(volatile fecdma_t * fecp, u8 * mac)
{
u8 currByte; /* byte for which to compute the CRC */
int byte; /* loop - counter */
int bit; /* loop - counter */
u32 crc = 0xffffffff; /* initial value */
for (byte = 0; byte < 6; byte++) {
currByte = mac[byte];
for (bit = 0; bit < 8; bit++) {
if ((currByte & 0x01) ^ (crc & 0x01)) {
crc >>= 1;
crc = crc ^ 0xedb88320;
} else {
crc >>= 1;
}
currByte >>= 1;
}
}
crc = crc >> 26;
/* Set individual hash table register */
if (crc >= 32) {
fecp->ialr = (1 << (crc - 32));
fecp->iaur = 0;
} else {
fecp->ialr = 0;
fecp->iaur = (1 << crc);
}
/* Set physical address */
fecp->palr = (mac[0] << 24) + (mac[1] << 16) + (mac[2] << 8) + mac[3];
fecp->paur = (mac[4] << 24) + (mac[5] << 16) + 0x8808;
/* Clear multicast address hash table */
fecp->gaur = 0;
fecp->galr = 0;
}
static int fec_init(struct eth_device *dev, bd_t * bd)
{
struct fec_info_dma *info = dev->priv;
volatile fecdma_t *fecp = (fecdma_t *) (info->iobase);
int i;
uchar enetaddr[6];
#ifdef ET_DEBUG
printf("fec_init: iobase 0x%08x ...\n", info->iobase);
#endif
fecpin_setclear(dev, 1);
fec_halt(dev);
#if defined(CONFIG_CMD_MII) || defined (CONFIG_MII) || \
defined (CONFIG_SYS_DISCOVER_PHY)
mii_init();
set_fec_duplex_speed(fecp, bd, info->dup_spd);
#else
#ifndef CONFIG_SYS_DISCOVER_PHY
set_fec_duplex_speed(fecp, bd, (FECDUPLEX << 16) | FECSPEED);
#endif /* ifndef CONFIG_SYS_DISCOVER_PHY */
#endif /* CONFIG_CMD_MII || CONFIG_MII */
/* We use strictly polling mode only */
fecp->eimr = 0;
/* Clear any pending interrupt */
fecp->eir = 0xffffffff;
/* Set station address */
if ((u32) fecp == CONFIG_SYS_FEC0_IOBASE)
eth_getenv_enetaddr("ethaddr", enetaddr);
else
eth_getenv_enetaddr("eth1addr", enetaddr);
fec_set_hwaddr(fecp, enetaddr);
/* Set Opcode/Pause Duration Register */
fecp->opd = 0x00010020;
/* Setup Buffers and Buffer Desriptors */
info->rxIdx = 0;
info->txIdx = 0;
/* Setup Receiver Buffer Descriptors (13.14.24.18)
* Settings: Empty, Wrap */
for (i = 0; i < PKTBUFSRX; i++) {
info->rxbd[i].cbd_sc = BD_ENET_RX_EMPTY;
info->rxbd[i].cbd_datlen = PKTSIZE_ALIGN;
info->rxbd[i].cbd_bufaddr = (uint) NetRxPackets[i];
}
info->rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP;
/* Setup Ethernet Transmitter Buffer Descriptors (13.14.24.19)
* Settings: Last, Tx CRC */
for (i = 0; i < CONFIG_SYS_TX_ETH_BUFFER; i++) {
info->txbd[i].cbd_sc = 0;
info->txbd[i].cbd_datlen = 0;
info->txbd[i].cbd_bufaddr = (uint) (&info->txbuf[0]);
}
info->txbd[CONFIG_SYS_TX_ETH_BUFFER - 1].cbd_sc |= BD_ENET_TX_WRAP;
info->usedTbdIdx = 0;
info->cleanTbdNum = CONFIG_SYS_TX_ETH_BUFFER;
/* Set Rx FIFO alarm and granularity value */
fecp->rfcr = 0x0c000000;
fecp->rfar = 0x0000030c;
/* Set Tx FIFO granularity value */
fecp->tfcr = FIFO_CTRL_FRAME | FIFO_CTRL_GR(6) | 0x00040000;
fecp->tfar = 0x00000080;
fecp->tfwr = 0x2;
fecp->ctcwr = 0x03000000;
/* Enable DMA receive task */
MCD_startDma(info->rxTask, /* Dma channel */
(s8 *) info->rxbd, /*Source Address */
0, /* Source increment */
(s8 *) (&fecp->rfdr), /* dest */
4, /* dest increment */
0, /* DMA size */
4, /* xfer size */
info->rxInit, /* initiator */
info->rxPri, /* priority */
(MCD_FECRX_DMA | MCD_TT_FLAGS_DEF), /* Flags */
(MCD_NO_CSUM | MCD_NO_BYTE_SWAP) /* Function description */
);
/* Enable DMA tx task with no ready buffer descriptors */
MCD_startDma(info->txTask, /* Dma channel */
(s8 *) info->txbd, /*Source Address */
0, /* Source increment */
(s8 *) (&fecp->tfdr), /* dest */
4, /* dest incr */
0, /* DMA size */
4, /* xfer size */
info->txInit, /* initiator */
info->txPri, /* priority */
(MCD_FECTX_DMA | MCD_TT_FLAGS_DEF), /* Flags */
(MCD_NO_CSUM | MCD_NO_BYTE_SWAP) /* Function description */
);
/* Now enable the transmit and receive processing */
fecp->ecr |= FEC_ECR_ETHER_EN;
return 1;
}
static void fec_halt(struct eth_device *dev)
{
struct fec_info_dma *info = dev->priv;
volatile fecdma_t *fecp = (fecdma_t *) (info->iobase);
int counter = 0xffff;
/* issue graceful stop command to the FEC transmitter if necessary */
fecp->tcr |= FEC_TCR_GTS;
/* wait for graceful stop to register */
while ((counter--) && (!(fecp->eir & FEC_EIR_GRA))) ;
/* Disable DMA tasks */
MCD_killDma(info->txTask);
MCD_killDma(info->rxTask);;
/* Disable the Ethernet Controller */
fecp->ecr &= ~FEC_ECR_ETHER_EN;
/* Clear FIFO status registers */
fecp->rfsr &= FIFO_ERRSTAT;
fecp->tfsr &= FIFO_ERRSTAT;
fecp->frst = 0x01000000;
/* Issue a reset command to the FEC chip */
fecp->ecr |= FEC_ECR_RESET;
/* wait at least 20 clock cycles */
udelay(10000);
#ifdef ET_DEBUG
printf("Ethernet task stopped\n");
#endif
}
int mcdmafec_initialize(bd_t * bis)
{
struct eth_device *dev;
int i;
#ifdef CONFIG_SYS_DMA_USE_INTSRAM
u32 tmp = CONFIG_SYS_INTSRAM + 0x2000;
#endif
for (i = 0; i < sizeof(fec_info) / sizeof(fec_info[0]); i++) {
dev =
(struct eth_device *)memalign(CONFIG_SYS_CACHELINE_SIZE,
sizeof *dev);
if (dev == NULL)
hang();
memset(dev, 0, sizeof(*dev));
sprintf(dev->name, "FEC%d", fec_info[i].index);
dev->priv = &fec_info[i];
dev->init = fec_init;
dev->halt = fec_halt;
dev->send = fec_send;
dev->recv = fec_recv;
/* setup Receive and Transmit buffer descriptor */
#ifdef CONFIG_SYS_DMA_USE_INTSRAM
fec_info[i].rxbd = (cbd_t *)((u32)fec_info[i].rxbd + tmp);
tmp = (u32)fec_info[i].rxbd;
fec_info[i].txbd =
(cbd_t *)((u32)fec_info[i].txbd + tmp +
(PKTBUFSRX * sizeof(cbd_t)));
tmp = (u32)fec_info[i].txbd;
fec_info[i].txbuf =
(char *)((u32)fec_info[i].txbuf + tmp +
(CONFIG_SYS_TX_ETH_BUFFER * sizeof(cbd_t)));
tmp = (u32)fec_info[i].txbuf;
#else
fec_info[i].rxbd =
(cbd_t *) memalign(CONFIG_SYS_CACHELINE_SIZE,
(PKTBUFSRX * sizeof(cbd_t)));
fec_info[i].txbd =
(cbd_t *) memalign(CONFIG_SYS_CACHELINE_SIZE,
(CONFIG_SYS_TX_ETH_BUFFER * sizeof(cbd_t)));
fec_info[i].txbuf =
(char *)memalign(CONFIG_SYS_CACHELINE_SIZE, DBUF_LENGTH);
#endif
#ifdef ET_DEBUG
printf("rxbd %x txbd %x\n",
(int)fec_info[i].rxbd, (int)fec_info[i].txbd);
#endif
fec_info[i].phy_name = (char *)memalign(CONFIG_SYS_CACHELINE_SIZE, 32);
eth_register(dev);
#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
miiphy_register(dev->name,
mcffec_miiphy_read, mcffec_miiphy_write);
#endif
if (i > 0)
fec_info[i - 1].next = &fec_info[i];
}
fec_info[i - 1].next = &fec_info[0];
/* default speed */
bis->bi_ethspeed = 10;
return 0;
}