mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-21 01:18:52 +09:00
![Simon Glass](/assets/img/avatar_default.png)
This converts the following to Kconfig: CONFIG_ENV_IS_IN_MMC CONFIG_ENV_IS_IN_NAND CONFIG_ENV_IS_IN_UBI CONFIG_ENV_IS_NOWHERE In fact this already exists for sunxi as a 'choice' config. However not all the choices are available in Kconfig yet so we cannot use that. It would lead to more than one option being set. In addition, one purpose of this series is to allow the environment to be stored in more than one place. So the existing choice is converted to a normal config allowing each option to be set independently. There are not many opportunities for Kconfig updates to reduce the size of this patch. This was tested with ./tools/moveconfig.py -i CONFIG_ENV_IS_IN_MMC And then manual updates. This is because for CHAIN_OF_TRUST boards they can only have ENV_IS_NOWHERE set, so we enforce that via Kconfig logic now. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
115 lines
3.0 KiB
C
115 lines
3.0 KiB
C
/*
|
|
* USB armory MkI board configuration settings
|
|
* http://inversepath.com/usbarmory
|
|
*
|
|
* Copyright (C) 2015, Inverse Path
|
|
* Andrej Rosano <andrej@inversepath.com>
|
|
*
|
|
* SPDX-License-Identifier:|____GPL-2.0+
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
#define CONFIG_SYS_FSL_CLK
|
|
#define CONFIG_MXC_GPIO
|
|
|
|
#include <asm/arch/imx-regs.h>
|
|
|
|
#include <config_distro_defaults.h>
|
|
|
|
/* U-Boot environment */
|
|
#define CONFIG_ENV_OFFSET (6 * 64 * 1024)
|
|
#define CONFIG_ENV_SIZE (8 * 1024)
|
|
#define CONFIG_SYS_MMC_ENV_DEV 0
|
|
|
|
/* U-Boot general configurations */
|
|
#define CONFIG_SYS_CBSIZE 512
|
|
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
|
|
#define CONFIG_SYS_MAXARGS 16
|
|
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
|
|
|
|
/* UART */
|
|
#define CONFIG_MXC_UART
|
|
#define CONFIG_MXC_UART_BASE UART1_BASE
|
|
#define CONFIG_CONS_INDEX 1
|
|
|
|
/* SD/MMC */
|
|
#define CONFIG_FSL_ESDHC
|
|
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
|
|
#define CONFIG_SYS_FSL_ESDHC_NUM 1
|
|
|
|
/* USB */
|
|
#define CONFIG_USB_EHCI_MX5
|
|
#define CONFIG_MXC_USB_PORT 1
|
|
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
|
|
#define CONFIG_MXC_USB_FLAGS 0
|
|
|
|
/* I2C */
|
|
#define CONFIG_SYS_I2C
|
|
#define CONFIG_SYS_I2C_MXC
|
|
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
|
|
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
|
|
|
|
/* Fuse */
|
|
#define CONFIG_FSL_IIM
|
|
|
|
/* U-Boot memory offsets */
|
|
#define CONFIG_LOADADDR 0x72000000
|
|
#define CONFIG_SYS_TEXT_BASE 0x77800000
|
|
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
|
|
|
|
/* Linux boot */
|
|
#define CONFIG_HOSTNAME usbarmory
|
|
#define CONFIG_BOOTCOMMAND \
|
|
"run distro_bootcmd; " \
|
|
"setenv bootargs console=${console} ${bootargs_default}; " \
|
|
"ext2load mmc 0:1 ${kernel_addr_r} /boot/zImage; " \
|
|
"ext2load mmc 0:1 ${fdt_addr_r} /boot/${fdtfile}; " \
|
|
"bootz ${kernel_addr_r} - ${fdt_addr_r}"
|
|
|
|
#define BOOT_TARGET_DEVICES(func) func(MMC, mmc, 0)
|
|
|
|
#include <config_distro_bootcmd.h>
|
|
|
|
#define MEM_LAYOUT_ENV_SETTINGS \
|
|
"kernel_addr_r=0x70800000\0" \
|
|
"fdt_addr_r=0x71000000\0" \
|
|
"scriptaddr=0x70800000\0" \
|
|
"pxefile_addr_r=0x70800000\0" \
|
|
"ramdisk_addr_r=0x73000000\0"
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
MEM_LAYOUT_ENV_SETTINGS \
|
|
"bootargs_default=root=/dev/mmcblk0p1 rootwait rw\0" \
|
|
"fdtfile=imx53-usbarmory.dtb\0" \
|
|
"console=ttymxc0,115200\0" \
|
|
BOOTENV
|
|
|
|
#ifndef CONFIG_CMDLINE
|
|
#define CONFIG_BOOTARGS "console=ttymxc0,115200 root=/dev/mmcblk0p1 rootwait rw"
|
|
#define USBARMORY_FIT_PATH "/boot/usbarmory.itb"
|
|
#define USBARMORY_FIT_ADDR "0x70800000"
|
|
#endif
|
|
|
|
/* Physical Memory Map */
|
|
#define CONFIG_NR_DRAM_BANKS 1
|
|
#define PHYS_SDRAM CSD0_BASE_ADDR
|
|
#define PHYS_SDRAM_SIZE (gd->ram_size)
|
|
|
|
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
|
|
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
|
|
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
|
|
|
|
#define CONFIG_SYS_INIT_SP_OFFSET \
|
|
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
|
#define CONFIG_SYS_INIT_SP_ADDR \
|
|
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
|
|
|
|
#define CONFIG_SYS_MEMTEST_START 0x70000000
|
|
#define CONFIG_SYS_MEMTEST_END 0x90000000
|
|
|
|
#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
|
|
|
|
#endif /* __CONFIG_H */
|