mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-18 07:58:52 +09:00
![pekon gupta](/assets/img/avatar_default.png)
This patch omap-elm.c: replaces -ve integer value returned during errorneous condition, with proper error-codes. omap-gpmc.c: updates omap-gpmc driver to pass error-codes returned from omap-elm driver to upper layers Signed-off-by: Pekon Gupta <pekon@ti.com> Reviewed-by: Stefan Roese <sr@denx.de>
195 lines
5.4 KiB
C
195 lines
5.4 KiB
C
/*
|
|
* (C) Copyright 2010-2011 Texas Instruments, <www.ti.com>
|
|
* Mansoor Ahamed <mansoor.ahamed@ti.com>
|
|
*
|
|
* BCH Error Location Module (ELM) support.
|
|
*
|
|
* NOTE:
|
|
* 1. Supports only continuous mode. Dont see need for page mode in uboot
|
|
* 2. Supports only syndrome polynomial 0. i.e. poly local variable is
|
|
* always set to ELM_DEFAULT_POLY. Dont see need for other polynomial
|
|
* sets in uboot
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <asm/errno.h>
|
|
#include <linux/mtd/omap_elm.h>
|
|
#include <asm/arch/hardware.h>
|
|
|
|
#define DRIVER_NAME "omap-elm"
|
|
#define ELM_DEFAULT_POLY (0)
|
|
|
|
struct elm *elm_cfg;
|
|
|
|
/**
|
|
* elm_load_syndromes - Load BCH syndromes based on bch_type selection
|
|
* @syndrome: BCH syndrome
|
|
* @bch_type: BCH4/BCH8/BCH16
|
|
* @poly: Syndrome Polynomial set to use
|
|
*/
|
|
static void elm_load_syndromes(u8 *syndrome, enum bch_level bch_type, u8 poly)
|
|
{
|
|
u32 *ptr;
|
|
u32 val;
|
|
|
|
/* reg 0 */
|
|
ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[0];
|
|
val = syndrome[0] | (syndrome[1] << 8) | (syndrome[2] << 16) |
|
|
(syndrome[3] << 24);
|
|
writel(val, ptr);
|
|
/* reg 1 */
|
|
ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[1];
|
|
val = syndrome[4] | (syndrome[5] << 8) | (syndrome[6] << 16) |
|
|
(syndrome[7] << 24);
|
|
writel(val, ptr);
|
|
|
|
if (bch_type == BCH_8_BIT || bch_type == BCH_16_BIT) {
|
|
/* reg 2 */
|
|
ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[2];
|
|
val = syndrome[8] | (syndrome[9] << 8) | (syndrome[10] << 16) |
|
|
(syndrome[11] << 24);
|
|
writel(val, ptr);
|
|
/* reg 3 */
|
|
ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[3];
|
|
val = syndrome[12] | (syndrome[13] << 8) |
|
|
(syndrome[14] << 16) | (syndrome[15] << 24);
|
|
writel(val, ptr);
|
|
}
|
|
|
|
if (bch_type == BCH_16_BIT) {
|
|
/* reg 4 */
|
|
ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[4];
|
|
val = syndrome[16] | (syndrome[17] << 8) |
|
|
(syndrome[18] << 16) | (syndrome[19] << 24);
|
|
writel(val, ptr);
|
|
|
|
/* reg 5 */
|
|
ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[5];
|
|
val = syndrome[20] | (syndrome[21] << 8) |
|
|
(syndrome[22] << 16) | (syndrome[23] << 24);
|
|
writel(val, ptr);
|
|
|
|
/* reg 6 */
|
|
ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[6];
|
|
val = syndrome[24] | (syndrome[25] << 8) |
|
|
(syndrome[26] << 16) | (syndrome[27] << 24);
|
|
writel(val, ptr);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* elm_check_errors - Check for BCH errors and return error locations
|
|
* @syndrome: BCH syndrome
|
|
* @bch_type: BCH4/BCH8/BCH16
|
|
* @error_count: Returns number of errrors in the syndrome
|
|
* @error_locations: Returns error locations (in decimal) in this array
|
|
*
|
|
* Check the provided syndrome for BCH errors and return error count
|
|
* and locations in the array passed. Returns -1 if error is not correctable,
|
|
* else returns 0
|
|
*/
|
|
int elm_check_error(u8 *syndrome, enum bch_level bch_type, u32 *error_count,
|
|
u32 *error_locations)
|
|
{
|
|
u8 poly = ELM_DEFAULT_POLY;
|
|
s8 i;
|
|
u32 location_status;
|
|
|
|
elm_load_syndromes(syndrome, bch_type, poly);
|
|
|
|
/* start processing */
|
|
writel((readl(&elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[6])
|
|
| ELM_SYNDROME_FRAGMENT_6_SYNDROME_VALID),
|
|
&elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[6]);
|
|
|
|
/* wait for processing to complete */
|
|
while ((readl(&elm_cfg->irqstatus) & (0x1 << poly)) != 0x1)
|
|
;
|
|
/* clear status */
|
|
writel((readl(&elm_cfg->irqstatus) | (0x1 << poly)),
|
|
&elm_cfg->irqstatus);
|
|
|
|
/* check if correctable */
|
|
location_status = readl(&elm_cfg->error_location[poly].location_status);
|
|
if (!(location_status & ELM_LOCATION_STATUS_ECC_CORRECTABLE_MASK)) {
|
|
printf("%s: uncorrectable ECC errors\n", DRIVER_NAME);
|
|
return -EBADMSG;
|
|
}
|
|
|
|
/* get error count */
|
|
*error_count = readl(&elm_cfg->error_location[poly].location_status) &
|
|
ELM_LOCATION_STATUS_ECC_NB_ERRORS_MASK;
|
|
|
|
for (i = 0; i < *error_count; i++) {
|
|
error_locations[i] =
|
|
readl(&elm_cfg->error_location[poly].error_location_x[i]);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/**
|
|
* elm_config - Configure ELM module
|
|
* @level: 4 / 8 / 16 bit BCH
|
|
*
|
|
* Configure ELM module based on BCH level.
|
|
* Set mode as continuous mode.
|
|
* Currently we are using only syndrome 0 and syndromes 1 to 6 are not used.
|
|
* Also, the mode is set only for syndrome 0
|
|
*/
|
|
int elm_config(enum bch_level level)
|
|
{
|
|
u32 val;
|
|
u8 poly = ELM_DEFAULT_POLY;
|
|
u32 buffer_size = 0x7FF;
|
|
|
|
/* config size and level */
|
|
val = (u32)(level) & ELM_LOCATION_CONFIG_ECC_BCH_LEVEL_MASK;
|
|
val |= ((buffer_size << ELM_LOCATION_CONFIG_ECC_SIZE_POS) &
|
|
ELM_LOCATION_CONFIG_ECC_SIZE_MASK);
|
|
writel(val, &elm_cfg->location_config);
|
|
|
|
/* config continous mode */
|
|
/* enable interrupt generation for syndrome polynomial set */
|
|
writel((readl(&elm_cfg->irqenable) | (0x1 << poly)),
|
|
&elm_cfg->irqenable);
|
|
/* set continuous mode for the syndrome polynomial set */
|
|
writel((readl(&elm_cfg->page_ctrl) & ~(0x1 << poly)),
|
|
&elm_cfg->page_ctrl);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* elm_reset - Do a soft reset of ELM
|
|
*
|
|
* Perform a soft reset of ELM and return after reset is done.
|
|
*/
|
|
void elm_reset(void)
|
|
{
|
|
/* initiate reset */
|
|
writel((readl(&elm_cfg->sysconfig) | ELM_SYSCONFIG_SOFTRESET),
|
|
&elm_cfg->sysconfig);
|
|
|
|
/* wait for reset complete and normal operation */
|
|
while ((readl(&elm_cfg->sysstatus) & ELM_SYSSTATUS_RESETDONE) !=
|
|
ELM_SYSSTATUS_RESETDONE)
|
|
;
|
|
}
|
|
|
|
/**
|
|
* elm_init - Initialize ELM module
|
|
*
|
|
* Initialize ELM support. Currently it does only base address init
|
|
* and ELM reset.
|
|
*/
|
|
void elm_init(void)
|
|
{
|
|
elm_cfg = (struct elm *)ELM_BASE;
|
|
elm_reset();
|
|
}
|