mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-20 08:58:52 +09:00
![Simon Glass](/assets/img/avatar_default.png)
Tegra recently moved to the new I2C framework, which sets up I2C prior to relocation, and prior to calling i2c_init_board(). This causes a crash on Tegra boards. Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Simon Glass <sjg@chromium.org>
632 lines
15 KiB
C
632 lines
15 KiB
C
/*
|
|
* Copyright (c) 2012 The Chromium OS Authors. All rights reserved.
|
|
* Copyright (c) 2010-2011 NVIDIA Corporation
|
|
* NVIDIA Corporation <www.nvidia.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <fdtdec.h>
|
|
#include <i2c.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/funcmux.h>
|
|
#include <asm/arch/gpio.h>
|
|
#include <asm/arch/pinmux.h>
|
|
#include <asm/arch-tegra/clk_rst.h>
|
|
#include <asm/arch-tegra/tegra_i2c.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
/* Information about i2c controller */
|
|
struct i2c_bus {
|
|
int id;
|
|
enum periph_id periph_id;
|
|
int speed;
|
|
int pinmux_config;
|
|
struct i2c_control *control;
|
|
struct i2c_ctlr *regs;
|
|
int is_dvc; /* DVC type, rather than I2C */
|
|
int is_scs; /* single clock source (T114+) */
|
|
int inited; /* bus is inited */
|
|
};
|
|
|
|
static struct i2c_bus i2c_controllers[TEGRA_I2C_NUM_CONTROLLERS];
|
|
|
|
static void set_packet_mode(struct i2c_bus *i2c_bus)
|
|
{
|
|
u32 config;
|
|
|
|
config = I2C_CNFG_NEW_MASTER_FSM_MASK | I2C_CNFG_PACKET_MODE_MASK;
|
|
|
|
if (i2c_bus->is_dvc) {
|
|
struct dvc_ctlr *dvc = (struct dvc_ctlr *)i2c_bus->regs;
|
|
|
|
writel(config, &dvc->cnfg);
|
|
} else {
|
|
writel(config, &i2c_bus->regs->cnfg);
|
|
/*
|
|
* program I2C_SL_CNFG.NEWSL to ENABLE. This fixes probe
|
|
* issues, i.e., some slaves may be wrongly detected.
|
|
*/
|
|
setbits_le32(&i2c_bus->regs->sl_cnfg, I2C_SL_CNFG_NEWSL_MASK);
|
|
}
|
|
}
|
|
|
|
static void i2c_reset_controller(struct i2c_bus *i2c_bus)
|
|
{
|
|
/* Reset I2C controller. */
|
|
reset_periph(i2c_bus->periph_id, 1);
|
|
|
|
/* re-program config register to packet mode */
|
|
set_packet_mode(i2c_bus);
|
|
}
|
|
|
|
static void i2c_init_controller(struct i2c_bus *i2c_bus)
|
|
{
|
|
/*
|
|
* Use PLLP - DP-04508-001_v06 datasheet indicates a divisor of 8
|
|
* here, in section 23.3.1, but in fact we seem to need a factor of
|
|
* 16 to get the right frequency.
|
|
*/
|
|
clock_start_periph_pll(i2c_bus->periph_id, CLOCK_ID_PERIPH,
|
|
i2c_bus->speed * 2 * 8);
|
|
|
|
if (i2c_bus->is_scs) {
|
|
/*
|
|
* T114 I2C went to a single clock source for standard/fast and
|
|
* HS clock speeds. The new clock rate setting calculation is:
|
|
* SCL = CLK_SOURCE.I2C /
|
|
* (CLK_MULT_STD_FAST_MODE * (I2C_CLK_DIV_STD_FAST_MODE+1) *
|
|
* I2C FREQUENCY DIVISOR) as per the T114 TRM (sec 30.3.1).
|
|
*
|
|
* NOTE: We do this here, after the initial clock/pll start,
|
|
* because if we read the clk_div reg before the controller
|
|
* is running, we hang, and we need it for the new calc.
|
|
*/
|
|
int clk_div_stdfst_mode = readl(&i2c_bus->regs->clk_div) >> 16;
|
|
debug("%s: CLK_DIV_STD_FAST_MODE setting = %d\n", __func__,
|
|
clk_div_stdfst_mode);
|
|
|
|
clock_start_periph_pll(i2c_bus->periph_id, CLOCK_ID_PERIPH,
|
|
CLK_MULT_STD_FAST_MODE * (clk_div_stdfst_mode + 1) *
|
|
i2c_bus->speed * 2);
|
|
}
|
|
|
|
/* Reset I2C controller. */
|
|
i2c_reset_controller(i2c_bus);
|
|
|
|
/* Configure I2C controller. */
|
|
if (i2c_bus->is_dvc) { /* only for DVC I2C */
|
|
struct dvc_ctlr *dvc = (struct dvc_ctlr *)i2c_bus->regs;
|
|
|
|
setbits_le32(&dvc->ctrl3, DVC_CTRL_REG3_I2C_HW_SW_PROG_MASK);
|
|
}
|
|
|
|
funcmux_select(i2c_bus->periph_id, i2c_bus->pinmux_config);
|
|
}
|
|
|
|
static void send_packet_headers(
|
|
struct i2c_bus *i2c_bus,
|
|
struct i2c_trans_info *trans,
|
|
u32 packet_id)
|
|
{
|
|
u32 data;
|
|
|
|
/* prepare header1: Header size = 0 Protocol = I2C, pktType = 0 */
|
|
data = PROTOCOL_TYPE_I2C << PKT_HDR1_PROTOCOL_SHIFT;
|
|
data |= packet_id << PKT_HDR1_PKT_ID_SHIFT;
|
|
data |= i2c_bus->id << PKT_HDR1_CTLR_ID_SHIFT;
|
|
writel(data, &i2c_bus->control->tx_fifo);
|
|
debug("pkt header 1 sent (0x%x)\n", data);
|
|
|
|
/* prepare header2 */
|
|
data = (trans->num_bytes - 1) << PKT_HDR2_PAYLOAD_SIZE_SHIFT;
|
|
writel(data, &i2c_bus->control->tx_fifo);
|
|
debug("pkt header 2 sent (0x%x)\n", data);
|
|
|
|
/* prepare IO specific header: configure the slave address */
|
|
data = trans->address << PKT_HDR3_SLAVE_ADDR_SHIFT;
|
|
|
|
/* Enable Read if it is not a write transaction */
|
|
if (!(trans->flags & I2C_IS_WRITE))
|
|
data |= PKT_HDR3_READ_MODE_MASK;
|
|
|
|
/* Write I2C specific header */
|
|
writel(data, &i2c_bus->control->tx_fifo);
|
|
debug("pkt header 3 sent (0x%x)\n", data);
|
|
}
|
|
|
|
static int wait_for_tx_fifo_empty(struct i2c_control *control)
|
|
{
|
|
u32 count;
|
|
int timeout_us = I2C_TIMEOUT_USEC;
|
|
|
|
while (timeout_us >= 0) {
|
|
count = (readl(&control->fifo_status) & TX_FIFO_EMPTY_CNT_MASK)
|
|
>> TX_FIFO_EMPTY_CNT_SHIFT;
|
|
if (count == I2C_FIFO_DEPTH)
|
|
return 1;
|
|
udelay(10);
|
|
timeout_us -= 10;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wait_for_rx_fifo_notempty(struct i2c_control *control)
|
|
{
|
|
u32 count;
|
|
int timeout_us = I2C_TIMEOUT_USEC;
|
|
|
|
while (timeout_us >= 0) {
|
|
count = (readl(&control->fifo_status) & TX_FIFO_FULL_CNT_MASK)
|
|
>> TX_FIFO_FULL_CNT_SHIFT;
|
|
if (count)
|
|
return 1;
|
|
udelay(10);
|
|
timeout_us -= 10;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wait_for_transfer_complete(struct i2c_control *control)
|
|
{
|
|
int int_status;
|
|
int timeout_us = I2C_TIMEOUT_USEC;
|
|
|
|
while (timeout_us >= 0) {
|
|
int_status = readl(&control->int_status);
|
|
if (int_status & I2C_INT_NO_ACK_MASK)
|
|
return -int_status;
|
|
if (int_status & I2C_INT_ARBITRATION_LOST_MASK)
|
|
return -int_status;
|
|
if (int_status & I2C_INT_XFER_COMPLETE_MASK)
|
|
return 0;
|
|
|
|
udelay(10);
|
|
timeout_us -= 10;
|
|
}
|
|
|
|
return -1;
|
|
}
|
|
|
|
static int send_recv_packets(struct i2c_bus *i2c_bus,
|
|
struct i2c_trans_info *trans)
|
|
{
|
|
struct i2c_control *control = i2c_bus->control;
|
|
u32 int_status;
|
|
u32 words;
|
|
u8 *dptr;
|
|
u32 local;
|
|
uchar last_bytes;
|
|
int error = 0;
|
|
int is_write = trans->flags & I2C_IS_WRITE;
|
|
|
|
/* clear status from previous transaction, XFER_COMPLETE, NOACK, etc. */
|
|
int_status = readl(&control->int_status);
|
|
writel(int_status, &control->int_status);
|
|
|
|
send_packet_headers(i2c_bus, trans, 1);
|
|
|
|
words = DIV_ROUND_UP(trans->num_bytes, 4);
|
|
last_bytes = trans->num_bytes & 3;
|
|
dptr = trans->buf;
|
|
|
|
while (words) {
|
|
u32 *wptr = (u32 *)dptr;
|
|
|
|
if (is_write) {
|
|
/* deal with word alignment */
|
|
if ((unsigned)dptr & 3) {
|
|
memcpy(&local, dptr, sizeof(u32));
|
|
writel(local, &control->tx_fifo);
|
|
debug("pkt data sent (0x%x)\n", local);
|
|
} else {
|
|
writel(*wptr, &control->tx_fifo);
|
|
debug("pkt data sent (0x%x)\n", *wptr);
|
|
}
|
|
if (!wait_for_tx_fifo_empty(control)) {
|
|
error = -1;
|
|
goto exit;
|
|
}
|
|
} else {
|
|
if (!wait_for_rx_fifo_notempty(control)) {
|
|
error = -1;
|
|
goto exit;
|
|
}
|
|
/*
|
|
* for the last word, we read into our local buffer,
|
|
* in case that caller did not provide enough buffer.
|
|
*/
|
|
local = readl(&control->rx_fifo);
|
|
if ((words == 1) && last_bytes)
|
|
memcpy(dptr, (char *)&local, last_bytes);
|
|
else if ((unsigned)dptr & 3)
|
|
memcpy(dptr, &local, sizeof(u32));
|
|
else
|
|
*wptr = local;
|
|
debug("pkt data received (0x%x)\n", local);
|
|
}
|
|
words--;
|
|
dptr += sizeof(u32);
|
|
}
|
|
|
|
if (wait_for_transfer_complete(control)) {
|
|
error = -1;
|
|
goto exit;
|
|
}
|
|
return 0;
|
|
exit:
|
|
/* error, reset the controller. */
|
|
i2c_reset_controller(i2c_bus);
|
|
|
|
return error;
|
|
}
|
|
|
|
static int tegra_i2c_write_data(struct i2c_bus *bus, u32 addr, u8 *data,
|
|
u32 len)
|
|
{
|
|
int error;
|
|
struct i2c_trans_info trans_info;
|
|
|
|
trans_info.address = addr;
|
|
trans_info.buf = data;
|
|
trans_info.flags = I2C_IS_WRITE;
|
|
trans_info.num_bytes = len;
|
|
trans_info.is_10bit_address = 0;
|
|
|
|
error = send_recv_packets(bus, &trans_info);
|
|
if (error)
|
|
debug("tegra_i2c_write_data: Error (%d) !!!\n", error);
|
|
|
|
return error;
|
|
}
|
|
|
|
static int tegra_i2c_read_data(struct i2c_bus *bus, u32 addr, u8 *data,
|
|
u32 len)
|
|
{
|
|
int error;
|
|
struct i2c_trans_info trans_info;
|
|
|
|
trans_info.address = addr | 1;
|
|
trans_info.buf = data;
|
|
trans_info.flags = 0;
|
|
trans_info.num_bytes = len;
|
|
trans_info.is_10bit_address = 0;
|
|
|
|
error = send_recv_packets(bus, &trans_info);
|
|
if (error)
|
|
debug("tegra_i2c_read_data: Error (%d) !!!\n", error);
|
|
|
|
return error;
|
|
}
|
|
|
|
#ifndef CONFIG_OF_CONTROL
|
|
#error "Please enable device tree support to use this driver"
|
|
#endif
|
|
|
|
/**
|
|
* Check that a bus number is valid and return a pointer to it
|
|
*
|
|
* @param bus_num Bus number to check / return
|
|
* @return pointer to bus, if valid, else NULL
|
|
*/
|
|
static struct i2c_bus *tegra_i2c_get_bus(struct i2c_adapter *adap)
|
|
{
|
|
struct i2c_bus *bus;
|
|
|
|
bus = &i2c_controllers[adap->hwadapnr];
|
|
if (!bus->inited) {
|
|
debug("%s: Bus %u not available\n", __func__, adap->hwadapnr);
|
|
return NULL;
|
|
}
|
|
|
|
return bus;
|
|
}
|
|
|
|
static unsigned int tegra_i2c_set_bus_speed(struct i2c_adapter *adap,
|
|
unsigned int speed)
|
|
{
|
|
struct i2c_bus *bus;
|
|
|
|
bus = tegra_i2c_get_bus(adap);
|
|
if (!bus)
|
|
return 0;
|
|
bus->speed = speed;
|
|
i2c_init_controller(bus);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int i2c_get_config(const void *blob, int node, struct i2c_bus *i2c_bus)
|
|
{
|
|
i2c_bus->regs = (struct i2c_ctlr *)fdtdec_get_addr(blob, node, "reg");
|
|
|
|
/*
|
|
* We don't have a binding for pinmux yet. Leave it out for now. So
|
|
* far no one needs anything other than the default.
|
|
*/
|
|
i2c_bus->pinmux_config = FUNCMUX_DEFAULT;
|
|
i2c_bus->speed = fdtdec_get_int(blob, node, "clock-frequency", 0);
|
|
i2c_bus->periph_id = clock_decode_periph_id(blob, node);
|
|
|
|
/*
|
|
* We can't specify the pinmux config in the fdt, so I2C2 will not
|
|
* work on Seaboard. It normally has no devices on it anyway.
|
|
* You could add in this little hack if you need to use it.
|
|
* The correct solution is a pinmux binding in the fdt.
|
|
*
|
|
* if (i2c_bus->periph_id == PERIPH_ID_I2C2)
|
|
* i2c_bus->pinmux_config = FUNCMUX_I2C2_PTA;
|
|
*/
|
|
if (i2c_bus->periph_id == -1)
|
|
return -FDT_ERR_NOTFOUND;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Process a list of nodes, adding them to our list of I2C ports.
|
|
*
|
|
* @param blob fdt blob
|
|
* @param node_list list of nodes to process (any <=0 are ignored)
|
|
* @param count number of nodes to process
|
|
* @param is_dvc 1 if these are DVC ports, 0 if standard I2C
|
|
* @param is_scs 1 if this HW uses a single clock source (T114+)
|
|
* @return 0 if ok, -1 on error
|
|
*/
|
|
static int process_nodes(const void *blob, int node_list[], int count,
|
|
int is_dvc, int is_scs)
|
|
{
|
|
struct i2c_bus *i2c_bus;
|
|
int i;
|
|
|
|
/* build the i2c_controllers[] for each controller */
|
|
for (i = 0; i < count; i++) {
|
|
int node = node_list[i];
|
|
|
|
if (node <= 0)
|
|
continue;
|
|
|
|
i2c_bus = &i2c_controllers[i];
|
|
i2c_bus->id = i;
|
|
|
|
if (i2c_get_config(blob, node, i2c_bus)) {
|
|
printf("i2c_init_board: failed to decode bus %d\n", i);
|
|
return -1;
|
|
}
|
|
|
|
i2c_bus->is_scs = is_scs;
|
|
|
|
i2c_bus->is_dvc = is_dvc;
|
|
if (is_dvc) {
|
|
i2c_bus->control =
|
|
&((struct dvc_ctlr *)i2c_bus->regs)->control;
|
|
} else {
|
|
i2c_bus->control = &i2c_bus->regs->control;
|
|
}
|
|
debug("%s: controller bus %d at %p, periph_id %d, speed %d: ",
|
|
is_dvc ? "dvc" : "i2c", i, i2c_bus->regs,
|
|
i2c_bus->periph_id, i2c_bus->speed);
|
|
i2c_init_controller(i2c_bus);
|
|
debug("ok\n");
|
|
i2c_bus->inited = 1;
|
|
|
|
/* Mark position as used */
|
|
node_list[i] = -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Sadly there is no error return from this function */
|
|
void i2c_init_board(void)
|
|
{
|
|
int node_list[TEGRA_I2C_NUM_CONTROLLERS];
|
|
const void *blob = gd->fdt_blob;
|
|
int count;
|
|
|
|
/* First check for newer (T114+) I2C ports */
|
|
count = fdtdec_find_aliases_for_id(blob, "i2c",
|
|
COMPAT_NVIDIA_TEGRA114_I2C, node_list,
|
|
TEGRA_I2C_NUM_CONTROLLERS);
|
|
if (process_nodes(blob, node_list, count, 0, 1))
|
|
return;
|
|
|
|
/* Now get the older (T20/T30) normal I2C ports */
|
|
count = fdtdec_find_aliases_for_id(blob, "i2c",
|
|
COMPAT_NVIDIA_TEGRA20_I2C, node_list,
|
|
TEGRA_I2C_NUM_CONTROLLERS);
|
|
if (process_nodes(blob, node_list, count, 0, 0))
|
|
return;
|
|
|
|
/* Now look for dvc ports */
|
|
count = fdtdec_add_aliases_for_id(blob, "i2c",
|
|
COMPAT_NVIDIA_TEGRA20_DVC, node_list,
|
|
TEGRA_I2C_NUM_CONTROLLERS);
|
|
if (process_nodes(blob, node_list, count, 1, 0))
|
|
return;
|
|
}
|
|
|
|
static void tegra_i2c_init(struct i2c_adapter *adap, int speed, int slaveaddr)
|
|
{
|
|
/* No i2c support prior to relocation */
|
|
if (!(gd->flags & GD_FLG_RELOC))
|
|
return;
|
|
|
|
/* This will override the speed selected in the fdt for that port */
|
|
debug("i2c_init(speed=%u, slaveaddr=0x%x)\n", speed, slaveaddr);
|
|
i2c_set_bus_speed(speed);
|
|
}
|
|
|
|
/* i2c write version without the register address */
|
|
int i2c_write_data(struct i2c_bus *bus, uchar chip, uchar *buffer, int len)
|
|
{
|
|
int rc;
|
|
|
|
debug("i2c_write_data: chip=0x%x, len=0x%x\n", chip, len);
|
|
debug("write_data: ");
|
|
/* use rc for counter */
|
|
for (rc = 0; rc < len; ++rc)
|
|
debug(" 0x%02x", buffer[rc]);
|
|
debug("\n");
|
|
|
|
/* Shift 7-bit address over for lower-level i2c functions */
|
|
rc = tegra_i2c_write_data(bus, chip << 1, buffer, len);
|
|
if (rc)
|
|
debug("i2c_write_data(): rc=%d\n", rc);
|
|
|
|
return rc;
|
|
}
|
|
|
|
/* i2c read version without the register address */
|
|
int i2c_read_data(struct i2c_bus *bus, uchar chip, uchar *buffer, int len)
|
|
{
|
|
int rc;
|
|
|
|
debug("inside i2c_read_data():\n");
|
|
/* Shift 7-bit address over for lower-level i2c functions */
|
|
rc = tegra_i2c_read_data(bus, chip << 1, buffer, len);
|
|
if (rc) {
|
|
debug("i2c_read_data(): rc=%d\n", rc);
|
|
return rc;
|
|
}
|
|
|
|
debug("i2c_read_data: ");
|
|
/* reuse rc for counter*/
|
|
for (rc = 0; rc < len; ++rc)
|
|
debug(" 0x%02x", buffer[rc]);
|
|
debug("\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Probe to see if a chip is present. */
|
|
static int tegra_i2c_probe(struct i2c_adapter *adap, uchar chip)
|
|
{
|
|
struct i2c_bus *bus;
|
|
int rc;
|
|
uchar reg;
|
|
|
|
debug("i2c_probe: addr=0x%x\n", chip);
|
|
bus = tegra_i2c_get_bus(adap);
|
|
if (!bus)
|
|
return 1;
|
|
reg = 0;
|
|
rc = i2c_write_data(bus, chip, ®, 1);
|
|
if (rc) {
|
|
debug("Error probing 0x%x.\n", chip);
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int i2c_addr_ok(const uint addr, const int alen)
|
|
{
|
|
/* We support 7 or 10 bit addresses, so one or two bytes each */
|
|
return alen == 1 || alen == 2;
|
|
}
|
|
|
|
/* Read bytes */
|
|
static int tegra_i2c_read(struct i2c_adapter *adap, uchar chip, uint addr,
|
|
int alen, uchar *buffer, int len)
|
|
{
|
|
struct i2c_bus *bus;
|
|
uint offset;
|
|
int i;
|
|
|
|
debug("i2c_read: chip=0x%x, addr=0x%x, len=0x%x\n",
|
|
chip, addr, len);
|
|
bus = tegra_i2c_get_bus(adap);
|
|
if (!bus)
|
|
return 1;
|
|
if (!i2c_addr_ok(addr, alen)) {
|
|
debug("i2c_read: Bad address %x.%d.\n", addr, alen);
|
|
return 1;
|
|
}
|
|
for (offset = 0; offset < len; offset++) {
|
|
if (alen) {
|
|
uchar data[alen];
|
|
for (i = 0; i < alen; i++) {
|
|
data[alen - i - 1] =
|
|
(addr + offset) >> (8 * i);
|
|
}
|
|
if (i2c_write_data(bus, chip, data, alen)) {
|
|
debug("i2c_read: error sending (0x%x)\n",
|
|
addr);
|
|
return 1;
|
|
}
|
|
}
|
|
if (i2c_read_data(bus, chip, buffer + offset, 1)) {
|
|
debug("i2c_read: error reading (0x%x)\n", addr);
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Write bytes */
|
|
static int tegra_i2c_write(struct i2c_adapter *adap, uchar chip, uint addr,
|
|
int alen, uchar *buffer, int len)
|
|
{
|
|
struct i2c_bus *bus;
|
|
uint offset;
|
|
int i;
|
|
|
|
debug("i2c_write: chip=0x%x, addr=0x%x, len=0x%x\n",
|
|
chip, addr, len);
|
|
bus = tegra_i2c_get_bus(adap);
|
|
if (!bus)
|
|
return 1;
|
|
if (!i2c_addr_ok(addr, alen)) {
|
|
debug("i2c_write: Bad address %x.%d.\n", addr, alen);
|
|
return 1;
|
|
}
|
|
for (offset = 0; offset < len; offset++) {
|
|
uchar data[alen + 1];
|
|
for (i = 0; i < alen; i++)
|
|
data[alen - i - 1] = (addr + offset) >> (8 * i);
|
|
data[alen] = buffer[offset];
|
|
if (i2c_write_data(bus, chip, data, alen + 1)) {
|
|
debug("i2c_write: error sending (0x%x)\n", addr);
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int tegra_i2c_get_dvc_bus_num(void)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < TEGRA_I2C_NUM_CONTROLLERS; i++) {
|
|
struct i2c_bus *bus = &i2c_controllers[i];
|
|
|
|
if (bus->inited && bus->is_dvc)
|
|
return i;
|
|
}
|
|
|
|
return -1;
|
|
}
|
|
|
|
/*
|
|
* Register soft i2c adapters
|
|
*/
|
|
U_BOOT_I2C_ADAP_COMPLETE(tegra0, tegra_i2c_init, tegra_i2c_probe,
|
|
tegra_i2c_read, tegra_i2c_write,
|
|
tegra_i2c_set_bus_speed, 100000, 0, 0)
|
|
U_BOOT_I2C_ADAP_COMPLETE(tegra1, tegra_i2c_init, tegra_i2c_probe,
|
|
tegra_i2c_read, tegra_i2c_write,
|
|
tegra_i2c_set_bus_speed, 100000, 0, 1)
|
|
U_BOOT_I2C_ADAP_COMPLETE(tegra2, tegra_i2c_init, tegra_i2c_probe,
|
|
tegra_i2c_read, tegra_i2c_write,
|
|
tegra_i2c_set_bus_speed, 100000, 0, 2)
|
|
U_BOOT_I2C_ADAP_COMPLETE(tegra3, tegra_i2c_init, tegra_i2c_probe,
|
|
tegra_i2c_read, tegra_i2c_write,
|
|
tegra_i2c_set_bus_speed, 100000, 0, 3)
|