mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-23 10:28:51 +09:00
![Shaohui Xie](/assets/img/avatar_default.png)
LS1046AQDS Specification: ------------------------- Memory subsystem: * 8GByte DDR4 SDRAM (64bit bus) * 128 Mbyte NOR flash single-chip memory * 512 Mbyte NAND flash * 64 Mbyte high-speed SPI flash * SD connector to interface with the SD memory card Ethernet: * Two XFI 10G ports * Two SGMII ports * Two RGMII ports PCIe: supports Gen 1 and Gen 2 SATA 3.0: one SATA 3.0 port USB 3.0: two micro AB connector and one type A connector UART: supports two UARTs up to 115200 bps for console Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com> Signed-off-by: Mingkai Hu <mingkai.hu@nxp.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
416 lines
10 KiB
C
416 lines
10 KiB
C
/*
|
|
* Copyright 2016 Freescale Semiconductor, Inc.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <netdev.h>
|
|
#include <fdt_support.h>
|
|
#include <fm_eth.h>
|
|
#include <fsl_mdio.h>
|
|
#include <fsl_dtsec.h>
|
|
#include <malloc.h>
|
|
#include <asm/arch/fsl_serdes.h>
|
|
|
|
#include "../common/qixis.h"
|
|
#include "../common/fman.h"
|
|
#include "ls1046aqds_qixis.h"
|
|
|
|
#define EMI_NONE 0xFF
|
|
#define EMI1_RGMII1 0
|
|
#define EMI1_RGMII2 1
|
|
#define EMI1_SLOT1 2
|
|
#define EMI1_SLOT2 3
|
|
#define EMI1_SLOT4 4
|
|
|
|
static int mdio_mux[NUM_FM_PORTS];
|
|
|
|
static const char * const mdio_names[] = {
|
|
"LS1046AQDS_MDIO_RGMII1",
|
|
"LS1046AQDS_MDIO_RGMII2",
|
|
"LS1046AQDS_MDIO_SLOT1",
|
|
"LS1046AQDS_MDIO_SLOT2",
|
|
"LS1046AQDS_MDIO_SLOT4",
|
|
"NULL",
|
|
};
|
|
|
|
/* Map SerDes 1 & 2 lanes to default slot. */
|
|
static u8 lane_to_slot[] = {1, 1, 1, 1, 0, 4, 0 , 0};
|
|
|
|
static const char *ls1046aqds_mdio_name_for_muxval(u8 muxval)
|
|
{
|
|
return mdio_names[muxval];
|
|
}
|
|
|
|
struct mii_dev *mii_dev_for_muxval(u8 muxval)
|
|
{
|
|
struct mii_dev *bus;
|
|
const char *name;
|
|
|
|
if (muxval > EMI1_SLOT4)
|
|
return NULL;
|
|
|
|
name = ls1046aqds_mdio_name_for_muxval(muxval);
|
|
|
|
if (!name) {
|
|
printf("No bus for muxval %x\n", muxval);
|
|
return NULL;
|
|
}
|
|
|
|
bus = miiphy_get_dev_by_name(name);
|
|
|
|
if (!bus) {
|
|
printf("No bus by name %s\n", name);
|
|
return NULL;
|
|
}
|
|
|
|
return bus;
|
|
}
|
|
|
|
struct ls1046aqds_mdio {
|
|
u8 muxval;
|
|
struct mii_dev *realbus;
|
|
};
|
|
|
|
static void ls1046aqds_mux_mdio(u8 muxval)
|
|
{
|
|
u8 brdcfg4;
|
|
|
|
if (muxval < 7) {
|
|
brdcfg4 = QIXIS_READ(brdcfg[4]);
|
|
brdcfg4 &= ~BRDCFG4_EMISEL_MASK;
|
|
brdcfg4 |= (muxval << BRDCFG4_EMISEL_SHIFT);
|
|
QIXIS_WRITE(brdcfg[4], brdcfg4);
|
|
}
|
|
}
|
|
|
|
static int ls1046aqds_mdio_read(struct mii_dev *bus, int addr, int devad,
|
|
int regnum)
|
|
{
|
|
struct ls1046aqds_mdio *priv = bus->priv;
|
|
|
|
ls1046aqds_mux_mdio(priv->muxval);
|
|
|
|
return priv->realbus->read(priv->realbus, addr, devad, regnum);
|
|
}
|
|
|
|
static int ls1046aqds_mdio_write(struct mii_dev *bus, int addr, int devad,
|
|
int regnum, u16 value)
|
|
{
|
|
struct ls1046aqds_mdio *priv = bus->priv;
|
|
|
|
ls1046aqds_mux_mdio(priv->muxval);
|
|
|
|
return priv->realbus->write(priv->realbus, addr, devad,
|
|
regnum, value);
|
|
}
|
|
|
|
static int ls1046aqds_mdio_reset(struct mii_dev *bus)
|
|
{
|
|
struct ls1046aqds_mdio *priv = bus->priv;
|
|
|
|
return priv->realbus->reset(priv->realbus);
|
|
}
|
|
|
|
static int ls1046aqds_mdio_init(char *realbusname, u8 muxval)
|
|
{
|
|
struct ls1046aqds_mdio *pmdio;
|
|
struct mii_dev *bus = mdio_alloc();
|
|
|
|
if (!bus) {
|
|
printf("Failed to allocate ls1046aqds MDIO bus\n");
|
|
return -1;
|
|
}
|
|
|
|
pmdio = malloc(sizeof(*pmdio));
|
|
if (!pmdio) {
|
|
printf("Failed to allocate ls1046aqds private data\n");
|
|
free(bus);
|
|
return -1;
|
|
}
|
|
|
|
bus->read = ls1046aqds_mdio_read;
|
|
bus->write = ls1046aqds_mdio_write;
|
|
bus->reset = ls1046aqds_mdio_reset;
|
|
sprintf(bus->name, ls1046aqds_mdio_name_for_muxval(muxval));
|
|
|
|
pmdio->realbus = miiphy_get_dev_by_name(realbusname);
|
|
|
|
if (!pmdio->realbus) {
|
|
printf("No bus with name %s\n", realbusname);
|
|
free(bus);
|
|
free(pmdio);
|
|
return -1;
|
|
}
|
|
|
|
pmdio->muxval = muxval;
|
|
bus->priv = pmdio;
|
|
return mdio_register(bus);
|
|
}
|
|
|
|
void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr,
|
|
enum fm_port port, int offset)
|
|
{
|
|
struct fixed_link f_link;
|
|
|
|
if (fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_SGMII) {
|
|
switch (port) {
|
|
case FM1_DTSEC9:
|
|
fdt_set_phy_handle(fdt, compat, addr, "sgmii_s1_p1");
|
|
break;
|
|
case FM1_DTSEC10:
|
|
fdt_set_phy_handle(fdt, compat, addr, "sgmii_s1_p2");
|
|
break;
|
|
case FM1_DTSEC5:
|
|
fdt_set_phy_handle(fdt, compat, addr, "sgmii_s1_p3");
|
|
break;
|
|
case FM1_DTSEC6:
|
|
fdt_set_phy_handle(fdt, compat, addr, "sgmii_s1_p4");
|
|
break;
|
|
case FM1_DTSEC2:
|
|
fdt_set_phy_handle(fdt, compat, addr, "sgmii_s4_p1");
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
} else if (fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_SGMII_2500) {
|
|
/* 2.5G SGMII interface */
|
|
f_link.phy_id = cpu_to_fdt32(port);
|
|
f_link.duplex = cpu_to_fdt32(1);
|
|
f_link.link_speed = cpu_to_fdt32(1000);
|
|
f_link.pause = 0;
|
|
f_link.asym_pause = 0;
|
|
/* no PHY for 2.5G SGMII on QDS */
|
|
fdt_delprop(fdt, offset, "phy-handle");
|
|
fdt_setprop(fdt, offset, "fixed-link", &f_link, sizeof(f_link));
|
|
fdt_setprop_string(fdt, offset, "phy-connection-type",
|
|
"sgmii-2500");
|
|
} else if (fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_QSGMII) {
|
|
switch (port) {
|
|
case FM1_DTSEC1:
|
|
fdt_set_phy_handle(fdt, compat, addr, "qsgmii_s2_p4");
|
|
break;
|
|
case FM1_DTSEC5:
|
|
fdt_set_phy_handle(fdt, compat, addr, "qsgmii_s2_p2");
|
|
break;
|
|
case FM1_DTSEC6:
|
|
fdt_set_phy_handle(fdt, compat, addr, "qsgmii_s2_p1");
|
|
break;
|
|
case FM1_DTSEC10:
|
|
fdt_set_phy_handle(fdt, compat, addr, "qsgmii_s2_p3");
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
fdt_delprop(fdt, offset, "phy-connection-type");
|
|
fdt_setprop_string(fdt, offset, "phy-connection-type",
|
|
"qsgmii");
|
|
} else if (fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_XGMII &&
|
|
(port == FM1_10GEC1 || port == FM1_10GEC2)) {
|
|
/* XFI interface */
|
|
f_link.phy_id = cpu_to_fdt32(port);
|
|
f_link.duplex = cpu_to_fdt32(1);
|
|
f_link.link_speed = cpu_to_fdt32(10000);
|
|
f_link.pause = 0;
|
|
f_link.asym_pause = 0;
|
|
/* no PHY for XFI */
|
|
fdt_delprop(fdt, offset, "phy-handle");
|
|
fdt_setprop(fdt, offset, "fixed-link", &f_link, sizeof(f_link));
|
|
fdt_setprop_string(fdt, offset, "phy-connection-type", "xgmii");
|
|
}
|
|
}
|
|
|
|
void fdt_fixup_board_enet(void *fdt)
|
|
{
|
|
int i;
|
|
|
|
for (i = FM1_DTSEC1; i < NUM_FM_PORTS; i++) {
|
|
switch (fm_info_get_enet_if(i)) {
|
|
case PHY_INTERFACE_MODE_SGMII:
|
|
case PHY_INTERFACE_MODE_QSGMII:
|
|
switch (mdio_mux[i]) {
|
|
case EMI1_SLOT1:
|
|
fdt_status_okay_by_alias(fdt, "emi1_slot1");
|
|
break;
|
|
case EMI1_SLOT2:
|
|
fdt_status_okay_by_alias(fdt, "emi1_slot2");
|
|
break;
|
|
case EMI1_SLOT4:
|
|
fdt_status_okay_by_alias(fdt, "emi1_slot4");
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
int board_eth_init(bd_t *bis)
|
|
{
|
|
#ifdef CONFIG_FMAN_ENET
|
|
int i, idx, lane, slot, interface;
|
|
struct memac_mdio_info dtsec_mdio_info;
|
|
struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
|
|
u32 srds_s1, srds_s2;
|
|
u8 brdcfg12;
|
|
|
|
srds_s1 = in_be32(&gur->rcwsr[4]) &
|
|
FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_MASK;
|
|
srds_s1 >>= FSL_CHASSIS2_RCWSR4_SRDS1_PRTCL_SHIFT;
|
|
|
|
srds_s2 = in_be32(&gur->rcwsr[4]) &
|
|
FSL_CHASSIS2_RCWSR4_SRDS2_PRTCL_MASK;
|
|
srds_s2 >>= FSL_CHASSIS2_RCWSR4_SRDS2_PRTCL_SHIFT;
|
|
|
|
/* Initialize the mdio_mux array so we can recognize empty elements */
|
|
for (i = 0; i < NUM_FM_PORTS; i++)
|
|
mdio_mux[i] = EMI_NONE;
|
|
|
|
dtsec_mdio_info.regs =
|
|
(struct memac_mdio_controller *)CONFIG_SYS_FM1_DTSEC_MDIO_ADDR;
|
|
|
|
dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME;
|
|
|
|
/* Register the 1G MDIO bus */
|
|
fm_memac_mdio_init(bis, &dtsec_mdio_info);
|
|
|
|
/* Register the muxing front-ends to the MDIO buses */
|
|
ls1046aqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_RGMII1);
|
|
ls1046aqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_RGMII2);
|
|
ls1046aqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT1);
|
|
ls1046aqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT2);
|
|
ls1046aqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT4);
|
|
|
|
/* Set the two on-board RGMII PHY address */
|
|
fm_info_set_phy_address(FM1_DTSEC3, RGMII_PHY1_ADDR);
|
|
fm_info_set_phy_address(FM1_DTSEC4, RGMII_PHY2_ADDR);
|
|
|
|
switch (srds_s1) {
|
|
case 0x3333:
|
|
/* SGMII on slot 1, MAC 9 */
|
|
fm_info_set_phy_address(FM1_DTSEC9, SGMII_CARD_PORT1_PHY_ADDR);
|
|
case 0x1333:
|
|
case 0x2333:
|
|
/* SGMII on slot 1, MAC 10 */
|
|
fm_info_set_phy_address(FM1_DTSEC10, SGMII_CARD_PORT2_PHY_ADDR);
|
|
case 0x1133:
|
|
case 0x2233:
|
|
/* SGMII on slot 1, MAC 5/6 */
|
|
fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT3_PHY_ADDR);
|
|
fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT4_PHY_ADDR);
|
|
break;
|
|
case 0x1040:
|
|
case 0x2040:
|
|
/* QSGMII on lane B, MAC 6/5/10/1 */
|
|
fm_info_set_phy_address(FM1_DTSEC6,
|
|
QSGMII_CARD_PORT1_PHY_ADDR_S2);
|
|
fm_info_set_phy_address(FM1_DTSEC5,
|
|
QSGMII_CARD_PORT2_PHY_ADDR_S2);
|
|
fm_info_set_phy_address(FM1_DTSEC10,
|
|
QSGMII_CARD_PORT3_PHY_ADDR_S2);
|
|
fm_info_set_phy_address(FM1_DTSEC1,
|
|
QSGMII_CARD_PORT4_PHY_ADDR_S2);
|
|
break;
|
|
case 0x3363:
|
|
/* SGMII on slot 1, MAC 9/10 */
|
|
fm_info_set_phy_address(FM1_DTSEC9, SGMII_CARD_PORT1_PHY_ADDR);
|
|
fm_info_set_phy_address(FM1_DTSEC10, SGMII_CARD_PORT2_PHY_ADDR);
|
|
case 0x1163:
|
|
case 0x2263:
|
|
case 0x2223:
|
|
/* SGMII on slot 1, MAC 6 */
|
|
fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT4_PHY_ADDR);
|
|
break;
|
|
default:
|
|
printf("Invalid SerDes protocol 0x%x for LS1046AQDS\n",
|
|
srds_s1);
|
|
break;
|
|
}
|
|
|
|
if (srds_s2 == 0x5a59 || srds_s2 == 0x5a06)
|
|
/* SGMII on slot 4, MAC 2 */
|
|
fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT1_PHY_ADDR);
|
|
|
|
for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
|
|
idx = i - FM1_DTSEC1;
|
|
interface = fm_info_get_enet_if(i);
|
|
switch (interface) {
|
|
case PHY_INTERFACE_MODE_SGMII:
|
|
case PHY_INTERFACE_MODE_QSGMII:
|
|
if (interface == PHY_INTERFACE_MODE_SGMII) {
|
|
if (i == FM1_DTSEC5) {
|
|
/* route lane 2 to slot1 so to have
|
|
* one sgmii riser card supports
|
|
* MAC5 and MAC6.
|
|
*/
|
|
brdcfg12 = QIXIS_READ(brdcfg[12]);
|
|
QIXIS_WRITE(brdcfg[12],
|
|
brdcfg12 | 0x80);
|
|
}
|
|
lane = serdes_get_first_lane(FSL_SRDS_1,
|
|
SGMII_FM1_DTSEC1 + idx);
|
|
} else {
|
|
/* clear the bit 7 to route lane B on slot2. */
|
|
brdcfg12 = QIXIS_READ(brdcfg[12]);
|
|
QIXIS_WRITE(brdcfg[12], brdcfg12 & 0x7f);
|
|
|
|
lane = serdes_get_first_lane(FSL_SRDS_1,
|
|
QSGMII_FM1_A);
|
|
lane_to_slot[lane] = 2;
|
|
}
|
|
|
|
if (i == FM1_DTSEC2)
|
|
lane = 5;
|
|
|
|
if (lane < 0)
|
|
break;
|
|
|
|
slot = lane_to_slot[lane];
|
|
debug("FM1@DTSEC%u expects SGMII in slot %u\n",
|
|
idx + 1, slot);
|
|
if (QIXIS_READ(present2) & (1 << (slot - 1)))
|
|
fm_disable_port(i);
|
|
|
|
switch (slot) {
|
|
case 1:
|
|
mdio_mux[i] = EMI1_SLOT1;
|
|
fm_info_set_mdio(i, mii_dev_for_muxval(
|
|
mdio_mux[i]));
|
|
break;
|
|
case 2:
|
|
mdio_mux[i] = EMI1_SLOT2;
|
|
fm_info_set_mdio(i, mii_dev_for_muxval(
|
|
mdio_mux[i]));
|
|
break;
|
|
case 4:
|
|
mdio_mux[i] = EMI1_SLOT4;
|
|
fm_info_set_mdio(i, mii_dev_for_muxval(
|
|
mdio_mux[i]));
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
break;
|
|
case PHY_INTERFACE_MODE_RGMII:
|
|
if (i == FM1_DTSEC3)
|
|
mdio_mux[i] = EMI1_RGMII1;
|
|
else if (i == FM1_DTSEC4)
|
|
mdio_mux[i] = EMI1_RGMII2;
|
|
fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i]));
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
cpu_eth_init(bis);
|
|
#endif /* CONFIG_FMAN_ENET */
|
|
|
|
return pci_eth_init(bis);
|
|
}
|