mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-09-06 04:43:21 +09:00
![Tom Rini](/assets/img/avatar_default.png)
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
197 lines
3.7 KiB
Plaintext
197 lines
3.7 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2017 Álvaro Fernández Rojas <noltari@gmail.com>
|
|
*/
|
|
|
|
#include <dt-bindings/clock/bcm6368-clock.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/reset/bcm6368-reset.h>
|
|
#include "skeleton.dtsi"
|
|
|
|
/ {
|
|
compatible = "brcm,bcm6368";
|
|
|
|
aliases {
|
|
spi0 = &spi;
|
|
};
|
|
|
|
cpus {
|
|
reg = <0x10000000 0x4>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
u-boot,dm-pre-reloc;
|
|
|
|
cpu@0 {
|
|
compatible = "brcm,bcm6368-cpu", "mips,mips4Kc";
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
u-boot,dm-pre-reloc;
|
|
};
|
|
|
|
cpu@1 {
|
|
compatible = "brcm,bcm6368-cpu", "mips,mips4Kc";
|
|
device_type = "cpu";
|
|
reg = <1>;
|
|
u-boot,dm-pre-reloc;
|
|
};
|
|
};
|
|
|
|
clocks {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
u-boot,dm-pre-reloc;
|
|
|
|
periph_osc: periph-osc {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <50000000>;
|
|
u-boot,dm-pre-reloc;
|
|
};
|
|
|
|
periph_clk: periph-clk {
|
|
compatible = "brcm,bcm6345-clk";
|
|
reg = <0x10000004 0x4>;
|
|
#clock-cells = <1>;
|
|
};
|
|
};
|
|
|
|
pflash: nor@18000000 {
|
|
compatible = "cfi-flash";
|
|
reg = <0x18000000 0x2000000>;
|
|
bank-width = <2>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
ubus {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
u-boot,dm-pre-reloc;
|
|
|
|
pll_cntl: syscon@10000008 {
|
|
compatible = "syscon";
|
|
reg = <0x10000008 0x4>;
|
|
};
|
|
|
|
syscon-reboot {
|
|
compatible = "syscon-reboot";
|
|
regmap = <&pll_cntl>;
|
|
offset = <0x0>;
|
|
mask = <0x1>;
|
|
};
|
|
|
|
periph_rst: reset-controller@10000010 {
|
|
compatible = "brcm,bcm6345-reset";
|
|
reg = <0x10000010 0x4>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
wdt: watchdog@1000005c {
|
|
compatible = "brcm,bcm6345-wdt";
|
|
reg = <0x1000005c 0xc>;
|
|
clocks = <&periph_osc>;
|
|
};
|
|
|
|
wdt-reboot {
|
|
compatible = "wdt-reboot";
|
|
wdt = <&wdt>;
|
|
};
|
|
|
|
gpio1: gpio-controller@10000080 {
|
|
compatible = "brcm,bcm6345-gpio";
|
|
reg = <0x10000080 0x4>, <0x10000088 0x4>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
ngpios = <6>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
gpio0: gpio-controller@10000084 {
|
|
compatible = "brcm,bcm6345-gpio";
|
|
reg = <0x10000084 0x4>, <0x1000008c 0x4>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
leds: led-controller@100000d0 {
|
|
compatible = "brcm,bcm6358-leds";
|
|
reg = <0x100000d0 0x8>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
uart0: serial@10000100 {
|
|
compatible = "brcm,bcm6345-uart";
|
|
reg = <0x10000100 0x18>;
|
|
clocks = <&periph_osc>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
uart1: serial@10000120 {
|
|
compatible = "brcm,bcm6345-uart";
|
|
reg = <0x10000120 0x18>;
|
|
clocks = <&periph_osc>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
spi: spi@10000800 {
|
|
compatible = "brcm,bcm6358-spi";
|
|
reg = <0x10000800 0x70c>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&periph_clk BCM6368_CLK_SPI>;
|
|
resets = <&periph_rst BCM6368_RST_SPI>;
|
|
spi-max-frequency = <20000000>;
|
|
num-cs = <6>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
memory-controller@10001200 {
|
|
compatible = "brcm,bcm6358-mc";
|
|
reg = <0x10001200 0x4c>;
|
|
u-boot,dm-pre-reloc;
|
|
};
|
|
|
|
ehci: usb-controller@10001500 {
|
|
compatible = "brcm,bcm6368-ehci", "generic-ehci";
|
|
reg = <0x10001500 0x100>;
|
|
phys = <&usbh>;
|
|
big-endian;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
ohci: usb-controller@10001600 {
|
|
compatible = "brcm,bcm6368-ohci", "generic-ohci";
|
|
reg = <0x10001600 0x100>;
|
|
phys = <&usbh>;
|
|
big-endian;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
usbh: usb-phy@10001700 {
|
|
compatible = "brcm,bcm6368-usbh";
|
|
reg = <0x10001700 0x38>;
|
|
#phy-cells = <0>;
|
|
clocks = <&periph_clk BCM6368_CLK_USBH>;
|
|
clock-names = "usbh";
|
|
resets = <&periph_rst BCM6368_RST_USBH>;
|
|
|
|
status = "disabled";
|
|
};
|
|
};
|
|
};
|