mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-27 04:18:51 +09:00
![Tom Rini](/assets/img/avatar_default.png)
This converts the following to Kconfig: CONFIG_CONS_INDEX We have existing entries for this option in a number of places, with different guards on them. They're also sometimes used for things not directly inside of the serial driver. First, introduce a new symbol to guard the use of CONFIG_CONS_INDEX, so that in the case where we don't need this for the serial driver, but for some other use, we can still do it. Next, consolidate all of these into the single entry in drivers/serial/Kconfig. Finally, introduce CONS_INDEX_[023456] so that we can imply a correct value here to make the defconfig side of this smaller. Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Rework a lot of the logic here, such that I took authorship from Adam, but kept his S-o-B line] Signed-off-by: Tom Rini <trini@konsulko.com>
259 lines
8.4 KiB
C
259 lines
8.4 KiB
C
/*
|
|
* (C) Copyright 2011 ARM Limited
|
|
* (C) Copyright 2010 Linaro
|
|
* Matt Waddel, <matt.waddel@linaro.org>
|
|
*
|
|
* Configuration for Versatile Express. Parts were derived from other ARM
|
|
* configurations.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef __VEXPRESS_COMMON_H
|
|
#define __VEXPRESS_COMMON_H
|
|
|
|
/*
|
|
* Definitions copied from linux kernel:
|
|
* arch/arm/mach-vexpress/include/mach/motherboard.h
|
|
*/
|
|
#ifdef CONFIG_VEXPRESS_ORIGINAL_MEMORY_MAP
|
|
/* CS register bases for the original memory map. */
|
|
#define V2M_PA_CS0 0x40000000
|
|
#define V2M_PA_CS1 0x44000000
|
|
#define V2M_PA_CS2 0x48000000
|
|
#define V2M_PA_CS3 0x4c000000
|
|
#define V2M_PA_CS7 0x10000000
|
|
|
|
#define V2M_PERIPH_OFFSET(x) (x << 12)
|
|
#define V2M_SYSREGS (V2M_PA_CS7 + V2M_PERIPH_OFFSET(0))
|
|
#define V2M_SYSCTL (V2M_PA_CS7 + V2M_PERIPH_OFFSET(1))
|
|
#define V2M_SERIAL_BUS_PCI (V2M_PA_CS7 + V2M_PERIPH_OFFSET(2))
|
|
|
|
#define V2M_BASE 0x60000000
|
|
#elif defined(CONFIG_VEXPRESS_EXTENDED_MEMORY_MAP)
|
|
/* CS register bases for the extended memory map. */
|
|
#define V2M_PA_CS0 0x08000000
|
|
#define V2M_PA_CS1 0x0c000000
|
|
#define V2M_PA_CS2 0x14000000
|
|
#define V2M_PA_CS3 0x18000000
|
|
#define V2M_PA_CS7 0x1c000000
|
|
|
|
#define V2M_PERIPH_OFFSET(x) (x << 16)
|
|
#define V2M_SYSREGS (V2M_PA_CS7 + V2M_PERIPH_OFFSET(1))
|
|
#define V2M_SYSCTL (V2M_PA_CS7 + V2M_PERIPH_OFFSET(2))
|
|
#define V2M_SERIAL_BUS_PCI (V2M_PA_CS7 + V2M_PERIPH_OFFSET(3))
|
|
|
|
#define V2M_BASE 0x80000000
|
|
#endif
|
|
|
|
/*
|
|
* Physical addresses, offset from V2M_PA_CS0-3
|
|
*/
|
|
#define V2M_NOR0 (V2M_PA_CS0)
|
|
#define V2M_NOR1 (V2M_PA_CS1)
|
|
#define V2M_SRAM (V2M_PA_CS2)
|
|
#define V2M_VIDEO_SRAM (V2M_PA_CS3 + 0x00000000)
|
|
#define V2M_ISP1761 (V2M_PA_CS3 + 0x03000000)
|
|
|
|
/* Common peripherals relative to CS7. */
|
|
#define V2M_AACI (V2M_PA_CS7 + V2M_PERIPH_OFFSET(4))
|
|
#define V2M_MMCI (V2M_PA_CS7 + V2M_PERIPH_OFFSET(5))
|
|
#define V2M_KMI0 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(6))
|
|
#define V2M_KMI1 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(7))
|
|
|
|
#define V2M_UART0 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(9))
|
|
#define V2M_UART1 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(10))
|
|
#define V2M_UART2 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(11))
|
|
#define V2M_UART3 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(12))
|
|
|
|
#define V2M_WDT (V2M_PA_CS7 + V2M_PERIPH_OFFSET(15))
|
|
|
|
#define V2M_TIMER01 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(17))
|
|
#define V2M_TIMER23 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(18))
|
|
|
|
#define V2M_SERIAL_BUS_DVI (V2M_PA_CS7 + V2M_PERIPH_OFFSET(22))
|
|
#define V2M_RTC (V2M_PA_CS7 + V2M_PERIPH_OFFSET(23))
|
|
|
|
#define V2M_CF (V2M_PA_CS7 + V2M_PERIPH_OFFSET(26))
|
|
|
|
#define V2M_CLCD (V2M_PA_CS7 + V2M_PERIPH_OFFSET(31))
|
|
#define V2M_SIZE_CS7 V2M_PERIPH_OFFSET(32)
|
|
|
|
/* System register offsets. */
|
|
#define V2M_SYS_CFGDATA (V2M_SYSREGS + 0x0a0)
|
|
#define V2M_SYS_CFGCTRL (V2M_SYSREGS + 0x0a4)
|
|
#define V2M_SYS_CFGSTAT (V2M_SYSREGS + 0x0a8)
|
|
|
|
/*
|
|
* Configuration
|
|
*/
|
|
#define SYS_CFG_START (1 << 31)
|
|
#define SYS_CFG_WRITE (1 << 30)
|
|
#define SYS_CFG_OSC (1 << 20)
|
|
#define SYS_CFG_VOLT (2 << 20)
|
|
#define SYS_CFG_AMP (3 << 20)
|
|
#define SYS_CFG_TEMP (4 << 20)
|
|
#define SYS_CFG_RESET (5 << 20)
|
|
#define SYS_CFG_SCC (6 << 20)
|
|
#define SYS_CFG_MUXFPGA (7 << 20)
|
|
#define SYS_CFG_SHUTDOWN (8 << 20)
|
|
#define SYS_CFG_REBOOT (9 << 20)
|
|
#define SYS_CFG_DVIMODE (11 << 20)
|
|
#define SYS_CFG_POWER (12 << 20)
|
|
#define SYS_CFG_SITE_MB (0 << 16)
|
|
#define SYS_CFG_SITE_DB1 (1 << 16)
|
|
#define SYS_CFG_SITE_DB2 (2 << 16)
|
|
#define SYS_CFG_STACK(n) ((n) << 12)
|
|
|
|
#define SYS_CFG_ERR (1 << 1)
|
|
#define SYS_CFG_COMPLETE (1 << 0)
|
|
|
|
/* Board info register */
|
|
#define SYS_ID V2M_SYSREGS
|
|
#define CONFIG_REVISION_TAG 1
|
|
|
|
#define CONFIG_SYS_MEMTEST_START V2M_BASE
|
|
#define CONFIG_SYS_MEMTEST_END 0x20000000
|
|
|
|
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
|
|
#define CONFIG_SETUP_MEMORY_TAGS 1
|
|
#define CONFIG_SYS_L2CACHE_OFF 1
|
|
#define CONFIG_INITRD_TAG 1
|
|
|
|
/* Size of malloc() pool */
|
|
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024)
|
|
|
|
#define SCTL_BASE V2M_SYSCTL
|
|
#define VEXPRESS_FLASHPROG_FLVPPEN (1 << 0)
|
|
|
|
#define CONFIG_SYS_TIMER_RATE 1000000
|
|
#define CONFIG_SYS_TIMER_COUNTER (V2M_TIMER01 + 0x4)
|
|
#define CONFIG_SYS_TIMER_COUNTS_DOWN
|
|
|
|
/* PL011 Serial Configuration */
|
|
#define CONFIG_PL011_CLOCK 24000000
|
|
#define CONFIG_PL01x_PORTS {(void *)CONFIG_SYS_SERIAL0, \
|
|
(void *)CONFIG_SYS_SERIAL1}
|
|
|
|
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
|
|
#define CONFIG_SYS_SERIAL0 V2M_UART0
|
|
#define CONFIG_SYS_SERIAL1 V2M_UART1
|
|
|
|
#define CONFIG_ARM_PL180_MMCI
|
|
#define CONFIG_ARM_PL180_MMCI_BASE V2M_MMCI
|
|
#define CONFIG_SYS_MMC_MAX_BLK_COUNT 127
|
|
#define CONFIG_ARM_PL180_MMCI_CLOCK_FREQ 6250000
|
|
|
|
/* BOOTP options */
|
|
#define CONFIG_BOOTP_BOOTFILESIZE
|
|
|
|
/* Miscellaneous configurable options */
|
|
#define CONFIG_SYS_LOAD_ADDR (V2M_BASE + 0x8000)
|
|
#define LINUX_BOOT_PARAM_ADDR (V2M_BASE + 0x2000)
|
|
|
|
/* Physical Memory Map */
|
|
#define CONFIG_NR_DRAM_BANKS 2
|
|
#define PHYS_SDRAM_1 (V2M_BASE) /* SDRAM Bank #1 */
|
|
#define PHYS_SDRAM_2 (((unsigned int)V2M_BASE) + \
|
|
((unsigned int)0x20000000))
|
|
#define PHYS_SDRAM_1_SIZE 0x20000000 /* 512 MB */
|
|
#define PHYS_SDRAM_2_SIZE 0x20000000 /* 512 MB */
|
|
|
|
/* additions for new relocation code */
|
|
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
|
|
#define CONFIG_SYS_INIT_RAM_SIZE 0x1000
|
|
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_SDRAM_BASE + \
|
|
CONFIG_SYS_INIT_RAM_SIZE - \
|
|
GENERATED_GBL_DATA_SIZE)
|
|
#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_GBL_DATA_OFFSET
|
|
|
|
/* Basic environment settings */
|
|
#define BOOT_TARGET_DEVICES(func) \
|
|
func(MMC, mmc, 1) \
|
|
func(MMC, mmc, 0) \
|
|
func(PXE, pxe, na) \
|
|
func(DHCP, dhcp, na)
|
|
#include <config_distro_bootcmd.h>
|
|
|
|
#ifdef CONFIG_VEXPRESS_ORIGINAL_MEMORY_MAP
|
|
#define CONFIG_PLATFORM_ENV_SETTINGS \
|
|
"loadaddr=0x80008000\0" \
|
|
"ramdisk_addr_r=0x61000000\0" \
|
|
"kernel_addr=0x44100000\0" \
|
|
"ramdisk_addr=0x44800000\0" \
|
|
"maxramdisk=0x1800000\0" \
|
|
"pxefile_addr_r=0x88000000\0" \
|
|
"scriptaddr=0x88000000\0" \
|
|
"kernel_addr_r=0x80008000\0"
|
|
#elif defined(CONFIG_VEXPRESS_EXTENDED_MEMORY_MAP)
|
|
#define CONFIG_PLATFORM_ENV_SETTINGS \
|
|
"loadaddr=0xa0008000\0" \
|
|
"ramdisk_addr_r=0x81000000\0" \
|
|
"kernel_addr=0x0c100000\0" \
|
|
"ramdisk_addr=0x0c800000\0" \
|
|
"maxramdisk=0x1800000\0" \
|
|
"pxefile_addr_r=0xa8000000\0" \
|
|
"scriptaddr=0xa8000000\0" \
|
|
"kernel_addr_r=0xa0008000\0"
|
|
#endif
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
CONFIG_PLATFORM_ENV_SETTINGS \
|
|
BOOTENV \
|
|
"console=ttyAMA0,38400n8\0" \
|
|
"dram=1024M\0" \
|
|
"root=/dev/sda1 rw\0" \
|
|
"mtd=armflash:1M@0x800000(uboot),7M@0x1000000(kernel)," \
|
|
"24M@0x2000000(initrd)\0" \
|
|
"flashargs=setenv bootargs root=${root} console=${console} " \
|
|
"mem=${dram} mtdparts=${mtd} mmci.fmax=190000 " \
|
|
"devtmpfs.mount=0 vmalloc=256M\0" \
|
|
"bootflash=run flashargs; " \
|
|
"cp ${ramdisk_addr} ${ramdisk_addr_r} ${maxramdisk}; " \
|
|
"bootm ${kernel_addr} ${ramdisk_addr_r}\0"
|
|
|
|
/* FLASH and environment organization */
|
|
#define PHYS_FLASH_SIZE 0x04000000 /* 64MB */
|
|
#define CONFIG_SYS_FLASH_CFI 1
|
|
#define CONFIG_FLASH_CFI_DRIVER 1
|
|
#define CONFIG_SYS_FLASH_SIZE 0x04000000
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 2
|
|
#define CONFIG_SYS_FLASH_BASE0 V2M_NOR0
|
|
#define CONFIG_SYS_FLASH_BASE1 V2M_NOR1
|
|
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE0
|
|
|
|
/* Timeout values in ticks */
|
|
#define CONFIG_SYS_FLASH_ERASE_TOUT (2 * CONFIG_SYS_HZ) /* Erase Timeout */
|
|
#define CONFIG_SYS_FLASH_WRITE_TOUT (2 * CONFIG_SYS_HZ) /* Write Timeout */
|
|
|
|
/* 255 0x40000 sectors + first or last sector may have 4 erase regions = 259 */
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 259 /* Max sectors */
|
|
#define FLASH_MAX_SECTOR_SIZE 0x00040000 /* 256 KB sectors */
|
|
|
|
/* Room required on the stack for the environment data */
|
|
#define CONFIG_ENV_SIZE FLASH_MAX_SECTOR_SIZE
|
|
|
|
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* use buffered writes */
|
|
|
|
/*
|
|
* Amount of flash used for environment:
|
|
* We don't know which end has the small erase blocks so we use the penultimate
|
|
* sector location for the environment
|
|
*/
|
|
#define CONFIG_ENV_SECT_SIZE FLASH_MAX_SECTOR_SIZE
|
|
#define CONFIG_ENV_OVERWRITE 1
|
|
|
|
/* Store environment at top of flash */
|
|
#define CONFIG_ENV_OFFSET (PHYS_FLASH_SIZE - \
|
|
(2 * CONFIG_ENV_SECT_SIZE))
|
|
#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE1 + \
|
|
CONFIG_ENV_OFFSET)
|
|
#define CONFIG_SYS_FLASH_PROTECTION /* The devices have real protection */
|
|
#define CONFIG_SYS_FLASH_EMPTY_INFO /* flinfo indicates empty blocks */
|
|
#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE0, \
|
|
CONFIG_SYS_FLASH_BASE1 }
|
|
|
|
/* Monitor Command Prompt */
|
|
#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
|
|
|
|
#endif /* VEXPRESS_COMMON_H */
|