mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-27 04:18:51 +09:00
![Tom Rini](/assets/img/avatar_default.png)
This converts the following to Kconfig: CONFIG_CONS_INDEX We have existing entries for this option in a number of places, with different guards on them. They're also sometimes used for things not directly inside of the serial driver. First, introduce a new symbol to guard the use of CONFIG_CONS_INDEX, so that in the case where we don't need this for the serial driver, but for some other use, we can still do it. Next, consolidate all of these into the single entry in drivers/serial/Kconfig. Finally, introduce CONS_INDEX_[023456] so that we can imply a correct value here to make the defconfig side of this smaller. Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Rework a lot of the logic here, such that I took authorship from Adam, but kept his S-o-B line] Signed-off-by: Tom Rini <trini@konsulko.com>
270 lines
7.8 KiB
C
270 lines
7.8 KiB
C
/*
|
|
* (C) Copyright 2016
|
|
* Heiko Schocher, DENX Software Engineering, hs@denx.de.
|
|
*
|
|
* Based on:
|
|
* am335x_evm.h
|
|
*
|
|
* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef __CONFIG_AM335X_SHC_H
|
|
#define __CONFIG_AM335X_SHC_H
|
|
|
|
#include <configs/ti_am335x_common.h>
|
|
|
|
/* settings we don;t want on this board */
|
|
#undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
|
|
#undef CONFIG_CMD_SPI
|
|
|
|
#define CONFIG_CMD_CACHE
|
|
|
|
#ifndef CONFIG_SPL_BUILD
|
|
# define CONFIG_TIMESTAMP
|
|
#endif
|
|
|
|
#define CONFIG_SYS_BOOTM_LEN (16 << 20)
|
|
|
|
/* Clock Defines */
|
|
#define V_OSCK 24000000 /* Clock output from T2 */
|
|
#define V_SCLK (V_OSCK)
|
|
|
|
/*
|
|
* in case of SD Card or Network boot we want to have a possibility to
|
|
* debrick the shc, therefore do not read environment from eMMC
|
|
*/
|
|
#if defined(CONFIG_SHC_SDBOOT) || defined(CONFIG_SHC_NETBOOT)
|
|
#define CONFIG_SYS_MMC_ENV_DEV 0
|
|
#else
|
|
#define CONFIG_SYS_MMC_ENV_DEV 1
|
|
#endif
|
|
|
|
/*
|
|
* Info when using boot partitions: As environment resides within first
|
|
* 128 kB, MLO must start at 128 kB == 0x20000
|
|
* ENV at MMC Boot0 Partition - 0/Undefined=user, 1=boot0, 2=boot1,
|
|
* 4..7=general0..3
|
|
*/
|
|
#define CONFIG_ENV_SIZE 0x1000 /* 4 KB */
|
|
#define CONFIG_ENV_OFFSET 0x7000 /* 28 kB */
|
|
|
|
#define CONFIG_HSMMC2_8BIT
|
|
|
|
#define CONFIG_ENV_OFFSET_REDUND 0x9000 /* 36 kB */
|
|
#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
|
|
|
|
#ifndef CONFIG_SHC_ICT
|
|
/*
|
|
* In builds other than ICT, reset to retry after timeout
|
|
* Define a timeout after which a stopped bootloader continues autoboot
|
|
* (only works with CONFIG_RESET_TO_RETRY)
|
|
*/
|
|
# define CONFIG_BOOT_RETRY_TIME 30
|
|
# define CONFIG_RESET_TO_RETRY
|
|
#endif
|
|
|
|
#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
|
|
|
|
#ifndef CONFIG_SPL_BUILD
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"loadaddr=0x80200000\0" \
|
|
"kloadaddr=0x84000000\0" \
|
|
"fdtaddr=0x85000000\0" \
|
|
"fdt_high=0xffffffff\0" \
|
|
"rdaddr=0x81000000\0" \
|
|
"bootfile=uImage\0" \
|
|
"fdtfile=am335x-shc.dtb\0" \
|
|
"verify=no\0" \
|
|
"serverip=10.55.152.184\0" \
|
|
"rootpath=/srv/nfs/shc-rootfs\0" \
|
|
"console=ttyO0,115200n8\0" \
|
|
"optargs=quiet\0" \
|
|
"mmcdev=1\0" \
|
|
"harakiri=0\0" \
|
|
"mmcpart=2\0" \
|
|
"active_root=root1\0" \
|
|
"inactive_root=root2\0" \
|
|
"mmcrootfstype=ext4 rootwait\0" \
|
|
"nfsopts=nolock\0" \
|
|
"static_ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}" \
|
|
"::off\0" \
|
|
"ip_method=none\0" \
|
|
"bootargs_defaults=setenv bootargs " \
|
|
"console=${console} " \
|
|
"${optargs}\0" \
|
|
"mmcargs=run bootargs_defaults;" \
|
|
"setenv bootargs ${bootargs} " \
|
|
"root=${mmcroot} " \
|
|
"rootfstype=${mmcrootfstype} ip=${ip_method}\0" \
|
|
"netargs=setenv bootargs console=${console} " \
|
|
"${optargs} " \
|
|
"root=/dev/nfs " \
|
|
"nfsroot=${serverip}:${rootpath},${nfsopts} rw " \
|
|
"ip=dhcp\0" \
|
|
"bootenv=uEnv.txt\0" \
|
|
"loadbootenv=if fatload mmc ${mmcdev} ${loadaddr} ${bootenv}; then " \
|
|
"echo Loaded environment from ${bootenv}; " \
|
|
"run importbootenv; " \
|
|
"fi;\0" \
|
|
"importbootenv=echo Importing environment variables from uEnv.txt ...; " \
|
|
"env import -t $loadaddr $filesize\0" \
|
|
"loaduimagefat=fatload mmc ${mmcdev} ${kloadaddr} ${bootfile}\0" \
|
|
"loaduimage=ext2load mmc ${mmcdev}:${mmcpart} ${kloadaddr} /boot/${bootfile}\0" \
|
|
"loadfdt=ext2load mmc ${mmcdev}:${mmcpart} ${fdtaddr} /boot/${fdtfile}\0" \
|
|
"netloaduimage=tftp ${loadaddr} ${bootfile}\0" \
|
|
"netloadfdt=tftp ${fdtaddr} ${fdtfile}\0" \
|
|
"mmcboot=echo Booting Linux from ${mmcdevice} ...; " \
|
|
"run mmcargs; " \
|
|
"if run loadfdt; then " \
|
|
"echo device tree detected; " \
|
|
"bootm ${kloadaddr} - ${fdtaddr}; " \
|
|
"else " \
|
|
"bootm ${kloadaddr}; " \
|
|
"fi; \0" \
|
|
"netboot=echo Booting from network ...; " \
|
|
"setenv autoload no; " \
|
|
"dhcp; " \
|
|
"run netloaduimage; " \
|
|
"run netargs; " \
|
|
"echo NFS path: ${serverip}:${rootpath};" \
|
|
"if run netloadfdt; then " \
|
|
"echo device tree detected; " \
|
|
"bootm ${loadaddr} - ${fdtaddr}; " \
|
|
"else " \
|
|
"bootm ${loadaddr}; " \
|
|
"fi; \0" \
|
|
"emmc_erase=if test ${harakiri} = 1 ; then echo erase emmc ...; setenv mmcdev 1; mmc erase 0 200; reset; fi; \0" \
|
|
"mmcpart_gp=mmcpart gp 1 40; \0" \
|
|
"mmcpart_enhance=mmcpart enhance 0 64; \0" \
|
|
"mmcpart_rel_write=mmcpart rel_write 1f; \0" \
|
|
"mmcpart_commit=mmcpart commit 1; \0" \
|
|
"mmc_hw_part=run mmcpart_gp; run mmcpart_enhance; run mmcpart_rel_write; run mmcpart_commit; \0" \
|
|
"led_success=gpio set 22; \0" \
|
|
"fusecmd=mmc dev 1; if mmcpart iscommitted; then echo HW Partitioning already committed; mmcpart list; else run mmc_hw_part; fi; run led_success; \0" \
|
|
"uenv_exec=if test -n $uenvcmd; then " \
|
|
"echo Running uenvcmd ...; " \
|
|
"run uenvcmd; " \
|
|
"fi;\0" \
|
|
"sd_setup=echo SD/MMC-Card detected on device 0; " \
|
|
"setenv mmcdevice SD; " \
|
|
"setenv mmcdev 0; " \
|
|
"setenv mmcpart 2; " \
|
|
"setenv mmcroot /dev/mmcblk${mmcdev}p${mmcpart};\0" \
|
|
"emmc_setup=echo eMMC detected on device 1; " \
|
|
"setenv mmcdevice eMMC; " \
|
|
"setenv mmcdev 1; " \
|
|
"run emmc_erase; " \
|
|
"if test ${active_root} = root2; then " \
|
|
"echo Active root is partition 6 (root2); " \
|
|
"setenv mmcpart 6; " \
|
|
"else " \
|
|
"echo Active root is partition 5 (root1); " \
|
|
"setenv mmcpart 5; " \
|
|
"fi; " \
|
|
"setenv mmcroot /dev/mmcblk${mmcdev}p${mmcpart};\0"
|
|
#endif /* #ifndef CONFIG_SPL_BUILD */
|
|
|
|
#if defined CONFIG_SHC_NETBOOT
|
|
/* Network Boot */
|
|
# define CONFIG_BOOTCOMMAND \
|
|
"run fusecmd; " \
|
|
"if run netboot; then " \
|
|
"echo Booting from network; " \
|
|
"else " \
|
|
"echo ERROR: Cannot boot from network!; " \
|
|
"panic; " \
|
|
"fi; "
|
|
|
|
#elif defined CONFIG_SHC_SDBOOT /* !defined CONFIG_SHC_NETBOOT */
|
|
/* SD-Card Boot */
|
|
# define CONFIG_BOOTCOMMAND \
|
|
"if mmc dev 0; mmc rescan; then " \
|
|
"run sd_setup; " \
|
|
"else " \
|
|
"echo ERROR: SD/MMC-Card not detected!; " \
|
|
"panic; " \
|
|
"fi; " \
|
|
"if run loaduimage; then " \
|
|
"echo Bootable SD/MMC-Card inserted, booting from it!; " \
|
|
"run mmcboot; " \
|
|
"else " \
|
|
"echo ERROR: Unable to load uImage from SD/MMC-Card!; " \
|
|
"panic; " \
|
|
"fi; "
|
|
|
|
#elif defined CONFIG_SHC_ICT
|
|
/* ICT adapter boots only u-boot and does HW partitioning */
|
|
# define CONFIG_BOOTCOMMAND \
|
|
"if mmc dev 0; mmc rescan; then " \
|
|
"run sd_setup; " \
|
|
"else " \
|
|
"echo ERROR: SD/MMC-Card not detected!; " \
|
|
"panic; " \
|
|
"fi; " \
|
|
"run fusecmd; "
|
|
|
|
#else /* !defined CONFIG_SHC_NETBOOT, !defined CONFIG_SHC_SDBOOT */
|
|
/* Regular Boot from internal eMMC */
|
|
# define CONFIG_BOOTCOMMAND \
|
|
"if mmc dev 1; mmc rescan; then " \
|
|
"run emmc_setup; " \
|
|
"else " \
|
|
"echo ERROR: eMMC device not detected!; " \
|
|
"panic; " \
|
|
"fi; " \
|
|
"if run loaduimage; then " \
|
|
"run mmcboot; " \
|
|
"else " \
|
|
"echo ERROR Unable to load uImage from eMMC!; " \
|
|
"echo Performing Rollback!; " \
|
|
"setenv _active_ ${active_root}; " \
|
|
"setenv _inactive_ ${inactive_root}; " \
|
|
"setenv active_root ${_inactive_}; " \
|
|
"setenv inactive_root ${_active_}; " \
|
|
"saveenv; " \
|
|
"reset; " \
|
|
"fi; "
|
|
|
|
#endif /* Regular Boot */
|
|
|
|
/* NS16550 Configuration */
|
|
#define CONFIG_SYS_NS16550_COM1 0x44e09000 /* UART0 */
|
|
#define CONFIG_SYS_NS16550_COM2 0x48022000 /* UART1 */
|
|
#define CONFIG_SYS_NS16550_COM3 0x48024000 /* UART2 */
|
|
#define CONFIG_SYS_NS16550_COM4 0x481a6000 /* UART3 */
|
|
#define CONFIG_SYS_NS16550_COM5 0x481a8000 /* UART4 */
|
|
#define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */
|
|
|
|
/* PMIC support */
|
|
#define CONFIG_POWER_TPS65217
|
|
|
|
/* SPL */
|
|
|
|
/*
|
|
* Disable MMC DM for SPL build and can be re-enabled after adding
|
|
* DM support in SPL
|
|
*/
|
|
#ifdef CONFIG_SPL_BUILD
|
|
#undef CONFIG_DM_MMC
|
|
#undef CONFIG_TIMER
|
|
#endif
|
|
|
|
#define CONFIG_DRIVER_TI_CPSW
|
|
#define CONFIG_MII
|
|
#define CONFIG_BOOTP_DEFAULT
|
|
#define CONFIG_BOOTP_DNS2
|
|
#define CONFIG_BOOTP_SEND_HOSTNAME
|
|
#define CONFIG_NET_RETRY_COUNT 10
|
|
#define CONFIG_PHY_SMSC
|
|
|
|
/* I2C configuration */
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
|
|
#define CONFIG_SYS_I2C_SPEED 400000
|
|
#define CONFIG_SYS_I2C_SLAVE 1
|
|
|
|
#define CONFIG_SHOW_BOOT_PROGRESS
|
|
#endif /* ! __CONFIG_AM335X_SHC_H */
|