mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-07-06 19:26:16 +09:00
7bdfe85929
enable DTS support for keymile mpc83xx based boards.
get rid of compile warning:
===================== WARNING ======================
This board does not use CONFIG_DM_ETH (Driver Model
for Ethernet drivers). Please update the board to use
CONFIG_DM_ETH before the v2020.07 release. Failure to
update by the deadline may result in board removal.
See doc/driver-model/migration.rst for more info.
====================================================
Therefore done:
- add DTS for all mpc83xx based boards from keymile
mainly they are not mainlined to linux.
- add u-boot specific dtsi
- add stdout-path
- add missing ucc4 par_io definitions, which were
in board code, but not in linux DTS
- remove not used ethernet nodes
Signed-off-by: Heiko Schocher <hs@denx.de>
Patch-cc: Mario Six <mario.six@gdsys.cc>
Patch-cc: Qiang Zhao <qiang.zhao@nxp.com>
Series-to: u-boot
Series-version: 3
Series-changes: 3
- rebase patchset to current mainline commit
c0192950df
- update defconfig files
Series-changes: 2
- add patch which fixes Codingstyle errors in drivers/qe
- add patch which converts the mpc83xx based boards from
keymile to DM_ETH
Cover-letter:
powerpc, mpc83xx: add DM_ETH support
This patch series adds DM ethernet support for mpc83xx based
keymile boards.
Travis build:
END
321 lines
8.1 KiB
Plaintext
321 lines
8.1 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* ABB PGGA KMCOGE5ne Device Tree Source
|
|
*
|
|
* Copyright (C) 2020 Heiko Schocher <hs@denx.de>
|
|
*
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include "km836x.dtsi"
|
|
|
|
/ {
|
|
model = "kmcoge5ne";
|
|
compatible = "ABB,kmcoge5ne";
|
|
|
|
aliases {
|
|
ethernet0 = &enet_admin;
|
|
ethernet1 = &enet_mate;
|
|
ethernet2 = &enet_switch;
|
|
serial0 = &serial0;
|
|
};
|
|
};
|
|
|
|
&soc {
|
|
/* brg for hdlc clk */
|
|
brg@0 {
|
|
compatible = "fsl,mpc-brg";
|
|
brg-name = "brg16";
|
|
brg-frequency = <20000000>; /* 20 MHz */
|
|
pio-handle = <&pio_brg>;
|
|
};
|
|
};
|
|
|
|
&i2c0 {
|
|
mux@70 {
|
|
compatible = "nxp,pca9547";
|
|
reg = <0x70>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
i2c@1 {
|
|
reg = <1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
/* Inventory EEPROM of the unit itself */
|
|
ivm@50 {
|
|
label = "MAIN_CTRL";
|
|
compatible = "dummy";
|
|
reg = <0x50>;
|
|
};
|
|
};
|
|
|
|
i2c@2 {
|
|
reg = <2>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
/* Inventory EEPROM of the fan unit */
|
|
fanu-ivm@50 {
|
|
label = "FANUV";
|
|
compatible = "dummy";
|
|
reg = <0x50>;
|
|
};
|
|
|
|
/* fan unit (GPIOs and so on) */
|
|
fanu@20 {
|
|
label = "FANUV_CTRL";
|
|
compatible = "dummy";
|
|
reg = <0x20>;
|
|
};
|
|
};
|
|
|
|
i2c@3 {
|
|
reg = <3>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
backplane@50 {
|
|
label = "BP_CTRL";
|
|
compatible = "dummy";
|
|
reg = <0x50>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&serial0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&par_io {
|
|
pio_ucc1: ucc_pin@0 { /* RGMII mng-switch */
|
|
pio-map = <
|
|
/* port pin dir open_drain assignment has_irq */
|
|
0 1 3 0 2 0 /* MDIO (PA1, bi, f2) */
|
|
0 2 1 0 1 0 /* MDC (PA2, in, f1) */
|
|
|
|
0 3 1 0 1 0 /* TxD0 (PA3, in, f1) */
|
|
0 4 1 0 1 0 /* TxD1 (PA4, in, f1) */
|
|
0 5 1 0 1 0 /* TxD2 (PA5, in, f1) */
|
|
0 6 1 0 1 0 /* TxD3 (PA6, in, f1) */
|
|
0 9 2 0 1 0 /* RxD0 (PA9, out, f1) */
|
|
0 10 2 0 1 0 /* RxD1 (PA10, out, f1) */
|
|
0 11 2 0 1 0 /* RxD2 (PA11, out, f1) */
|
|
0 12 2 0 1 0 /* RxD3 (PA12, out, f1) */
|
|
0 7 1 0 1 0 /* TX_EN (PA7, in, f1) */
|
|
0 15 2 0 1 0 /* RX_DV (PA15, out, f1) */
|
|
0 0 2 0 1 0 /* RX_CLK (PA0, out, f1) */
|
|
2 9 1 0 3 0 /* GTX_CLK (CLK10) */
|
|
2 8 2 0 1 0 /* GTX125 (CLK9) */
|
|
>;
|
|
};
|
|
|
|
pio_ucc4: ucc_pin@3 { /* RMII, admin front port */
|
|
pio-map = <
|
|
/* port pin dir open_drain assignment has_irq */
|
|
0 1 3 0 2 0 /* MDIO (PA1, bi, f2) */
|
|
0 2 1 0 1 0 /* MDC (PA2, in, f1) */
|
|
|
|
1 14 1 0 1 0 /* TxD0 (PB14, out, f1) */
|
|
1 15 1 0 1 0 /* TxD1 (PB15, out, f1) */
|
|
1 20 2 0 1 0 /* RxD0 (PB20, in, f1) */
|
|
1 21 2 0 1 0 /* RxD1 (PB21, in, f1) */
|
|
1 18 1 0 1 0 /* TX_EN (PB18, out, f1) */
|
|
1 26 2 0 1 0 /* RX_DV (PB26, in, f1) */
|
|
1 27 2 0 1 0 /* RX_ER (PB27, in, f1) */
|
|
|
|
2 16 2 0 1 0 /* UCC4_RMII_CLK (CLK17) */
|
|
>;
|
|
};
|
|
|
|
pio_ucc5: ucc_pin@4 { /* RMII, mate backplane port */
|
|
pio-map = <
|
|
/* port pin dir open_drain assignment has_irq */
|
|
0 1 3 0 2 0 /* MDIO (PA1, bi, f2) */
|
|
0 2 1 0 1 0 /* MDC (PA2, in, f1) */
|
|
|
|
3 0 1 0 1 0 /* TxD0 (PD0, out, f1) */
|
|
3 1 1 0 1 0 /* TxD1 (PD1, out, f1) */
|
|
3 6 2 0 1 0 /* RxD0 (PD6, in, f1) */
|
|
3 7 2 0 1 0 /* RxD1 (PD7, in, f1) */
|
|
3 4 1 0 1 0 /* TX_EN (PD4, out, f1) */
|
|
3 12 2 0 1 0 /* RX_DV (PD12, in, f1) */
|
|
3 13 2 0 1 0 /* RX_ER (PD13, in, f1) */
|
|
|
|
2 15 2 0 1 0 /* UCCx_RMII_CLK (CLK16) */
|
|
>;
|
|
};
|
|
|
|
pio_spi: spi_pin@01 {
|
|
pio-map = <
|
|
/* port pin dir open_drain assignment has_irq */
|
|
4 28 3 0 3 0 /* SPI_MOSI (PE28, out, f3) */
|
|
4 29 3 0 3 0 /* SPI_MISO (PE29, out, f3) */
|
|
4 30 3 0 3 0 /* SPI_CLK (PE30, out, f3) */
|
|
>;
|
|
};
|
|
|
|
pio_brg: brg_pin@0 {
|
|
pio-map = <
|
|
/* port pin dir open_drain assignment has_irq */
|
|
2 25 1 0 1 0 /* BRG (PC25, out, f1) */
|
|
>;
|
|
};
|
|
|
|
pio_tdm: tdm_pin@00 {
|
|
pio-map = <
|
|
/* port pin dir open_drain assignment has_irq */
|
|
/* TDMa */
|
|
0 8 3 0 2 0 /* RxD0 (PA8, bi, f2) */
|
|
0 13 3 0 2 0 /* TxD0 (PA13, bi, f2) */
|
|
0 14 2 0 2 0 /* RSync0 (PA14, in, f2) */
|
|
2 7 2 0 1 0 /* RxClk8 (PC7, in, f1) */
|
|
/* TDMb */
|
|
0 27 3 0 2 0 /* RxD1 (PA27, bi, f2) */
|
|
0 22 3 0 2 0 /* TxD1 (PA22, bi, f2) */
|
|
0 28 2 0 2 0 /* RSync1 (PA28, in, f2) */
|
|
2 1 2 0 1 0 /* RxClk2 (PC1, in, f1) */
|
|
/* TDMc */
|
|
1 5 3 0 2 0 /* RxD2 (PB5, bi, f2) */
|
|
1 8 3 0 2 0 /* TxD2 (PB8, bi, f2) */
|
|
1 2 2 0 3 0 /* RSync2 (PB2, in, f3) */
|
|
2 6 2 0 1 0 /* RxClk7 (PC6, in, f1) */
|
|
/* TDMd */
|
|
1 22 3 0 2 0 /* RxD3 (PB22, bi, f2) */
|
|
1 19 3 0 1 0 /* TxD3 (PB19, bi, f1) */
|
|
1 16 2 0 2 0 /* RSync3 (PB16, in, f2) */
|
|
2 13 2 0 1 0 /* RxClk14 (PC13, in, f1) */
|
|
/* TDMe */
|
|
3 8 3 0 2 0 /* RxD4 (PD8, bi, f2) */
|
|
3 5 3 0 2 0 /* TxD4 (PD5, bi, f2) */
|
|
3 2 2 0 2 0 /* RSync4 (PD2 , in, f2) */
|
|
2 22 2 0 1 0 /* RxClk23 (PC22, in, f1) */
|
|
/* TDMf */
|
|
3 19 3 0 2 0 /* RxD5 (PD19, bi, f2) */
|
|
3 22 3 0 2 0 /* TxD5 (PD22, bi, f2) */
|
|
3 16 2 0 1 0 /* RSync5 (PD16, in, f1) */
|
|
2 17 2 0 1 0 /* RxClk18 (PC17, in, f1) */
|
|
/* TDMg */
|
|
4 8 3 0 2 0 /* RxD6 (PE8, bi, f2) */
|
|
4 5 3 0 2 0 /* TxD6 (PE5, bi, f2) */
|
|
4 2 2 0 1 0 /* RSync6 (PE2, in, f1) */
|
|
2 19 2 0 1 0 /* RxClk20 (PC19, in, f1) */
|
|
/* TDMh */
|
|
4 19 3 0 2 0 /* RxD7 (PE19, bi, f2) */
|
|
4 22 3 0 3 0 /* TxD7 (PE22, bi, f3) */
|
|
4 16 2 0 2 0 /* RSync7 (PE16, in, f2) */
|
|
2 21 2 0 1 0 /* RxClk22 (PC21, in, f1) */
|
|
/* RxTxClk0/1 */
|
|
2 0 2 0 1 0 /* Clk1 (PC0, in, f1) */
|
|
2 23 2 0 1 0 /* Clk24 (PC23, in, f1) */
|
|
/* RxTxSync0/1 */
|
|
2 10 2 0 1 0 /* Clk11 (PC10, in, f1) */
|
|
2 20 2 0 1 0>; /* Clk21 (PC20, in, f1) */
|
|
};
|
|
};
|
|
|
|
&qe {
|
|
/* mng-switch port (UCC1, MDIO 0x10, RGMII) */
|
|
enet_switch: ethernet@2000 {
|
|
device_type = "network";
|
|
compatible = "ucc_geth";
|
|
cell-index = <1>;
|
|
reg = <0x2000 0x200>;
|
|
interrupts = <32>;
|
|
interrupt-parent = <&qeic>;
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
rx-clock-name = "none";
|
|
tx-clock-name = "clk9";
|
|
/*id=0, full-dup, 1G, no-pause, no-asym_p*/
|
|
fixed-link = <0 1 1000 0 0>;
|
|
phy-connection-type = "rgmii-id";
|
|
pio-handle = <&pio_ucc1>;
|
|
};
|
|
|
|
/* admin and debug port (UCC4, MDIO 0x00, RMII) */
|
|
enet_admin: ucc@3200 {
|
|
device_type = "network";
|
|
compatible = "ucc_geth";
|
|
cell-index = <4>;
|
|
reg = <0x3200 0x200>;
|
|
interrupts = <35>;
|
|
interrupt-parent = <&qeic>;
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
rx-clock-name = "none";
|
|
tx-clock-name = "clk17";
|
|
phy-handle = <&phy_admin>;
|
|
phy-connection-type = "rmii";
|
|
pio-handle = <&pio_ucc4>;
|
|
};
|
|
|
|
/* mate backplane port (UCC5, MDIO 0x08, RMII) */
|
|
enet_mate: ucc@2400 {
|
|
device_type = "network";
|
|
compatible = "ucc_geth";
|
|
cell-index = <5>;
|
|
reg = <0x2400 0x200>;
|
|
interrupts = <40>;
|
|
interrupt-parent = <&qeic>;
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
rx-clock-name = "none";
|
|
tx-clock-name = "clk16";
|
|
phy-handle = <&phy_mate>;
|
|
phy-connection-type = "rmii";
|
|
pio-handle = <&pio_ucc5>;
|
|
};
|
|
|
|
mdio@3320 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x3320 0x18>;
|
|
compatible = "fsl,ucc-mdio";
|
|
|
|
/* admin front port (UCC4, MDIO 0x00, RMII) */
|
|
phy_admin: ethernet-phy@00 {
|
|
reg = <0x0>;
|
|
};
|
|
|
|
/* mate bp port (UCC5, MDIO 0x08, RMII) */
|
|
phy_mate: ethernet-phy@08 {
|
|
reg = <0x08>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&localbus {
|
|
ranges = <0 0 0xf0000000 0x04000000
|
|
1 0 0xe8000000 0x01000000
|
|
3 0 0xa0000000 0x10000000
|
|
4 0 0xb0000000 0x10000000>;
|
|
|
|
flash@0,0 {
|
|
compatible = "cfi-flash";
|
|
reg = <0 0 0x04000000>;
|
|
nornand = "nor";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
bank-width = <2>;
|
|
partition@0 { /* 768KB */
|
|
label = "u-boot";
|
|
reg = <0 0xC0000>;
|
|
};
|
|
partition@c0000 { /* 128KB */
|
|
label = "env";
|
|
reg = <0xC0000 0x20000>;
|
|
};
|
|
partition@e0000 { /* 128KB */
|
|
label = "envred";
|
|
reg = <0xE0000 0x20000>;
|
|
};
|
|
partition@100000 { /* 64512KB */
|
|
label = "ubi0";
|
|
reg = <0x100000 0x3F00000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
#include "kmcoge5ne-uboot.dtsi"
|