brain-hackers_pepepper-mirror/u-boot-brain
1
0
Fork 0
mirror of https://github.com/brain-hackers/u-boot-brain synced 2024-10-04 10:30:50 +09:00
Code Issues Projects Releases Wiki Activity
98d9aa4013
u-boot-brain/board/freescale/common
History
Gong Qianyu 98d9aa4013 freescale/qixis: Add support for booting from SD/QSPI 
1.Use "qixis_reset sd" to boot from SD
2.Use "qixis_reset sd_qspi" to boot from SD with QSPI support
3.Use "qixis_reset qspi" to boot from QSPI flash

On some SoCs such as LS1021A and LS1043A, IFC and QSPI could be
pin-multiplexed. So the switches are different between SD boot with
IFC support and SD boot with QSPI support. The default booting from
SD is with IFC support.

Once QSPI is enabled(IFC disabled), only use I2C to access QIXIS.

Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com>
Reviewed-by: York Sun <york.sun@nxp.com>
2016-01-25 08:24:15 -08:00
..
p_corenet powerpc/mpc85xx: SECURE BOOT- NAND secure boot target for P3041 2015-07-31 08:50:18 -07:00
arm_sleep.c arm: ls1021atwr: optimize the deep sleep latency 2015-10-30 09:19:48 -07:00
cadmus.c Coding Style cleanup: remove trailing white space 2013-10-14 16:06:53 -04:00
cadmus.h Coding Style cleanup: remove trailing white space 2013-10-14 16:06:53 -04:00
cds_pci_ft.c fdt: Allow ft_board_setup() to report failure 2014-11-21 04:43:15 +01:00
cds_via.c Coding Style cleanup: remove trailing white space 2013-10-14 16:06:53 -04:00
cmd_esbc_validate.c Add bootscript support to esbc_validate. 2015-04-21 10:19:19 -07:00
dcu_sii9022a.c video: dcu: Add Sii9022A HDMI Transmitter support 2014-09-08 10:30:35 -07:00
dcu_sii9022a.h video: dcu: Add Sii9022A HDMI Transmitter support 2014-09-08 10:30:35 -07:00
diu_ch7301.c fsl/diu: ch7301 encoder split off from t1040qds/diu.c 2014-08-12 12:26:46 -07:00
diu_ch7301.h fsl/diu: ch7301 encoder split off from t1040qds/diu.c 2014-08-12 12:26:46 -07:00
eeprom.h Coding Style cleanup: remove trailing white space 2013-10-14 16:06:53 -04:00
fman.c freescale: fman: make sure phy-handle property is big endian 2015-12-13 18:27:28 -08:00
fman.h Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
fsl_validate.c armv8/ls1043ardb: add SECURE BOOT target for NOR 2015-12-15 08:57:35 +08:00
ics307_clk.c cosmetic: replace MIN, MAX with min, max 2014-09-24 18:30:29 -04:00
ics307_clk.h Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
idt8t49n222a_serdes_clk.c powerpc/mpc85xx: Cleanup license header in source files 2013-08-12 15:04:24 -07:00
idt8t49n222a_serdes_clk.h powerpc/mpc85xx: Cleanup license header in source files 2013-08-12 15:04:24 -07:00
ls102xa_stream_id.c arm: ls1021x: Add support for initializing CAAM's stream id 2015-02-24 13:11:05 -08:00
Makefile armv7/ls1021a: move ns_access to common file 2015-10-29 10:33:58 -07:00
mpc85xx_sleep.c fsl/deepsleep: avoid the DDR restore from being optimized out 2015-05-04 09:25:06 -07:00
ngpixis.c Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
ngpixis.h Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
ns_access.c armv7/ls1021a: move ns_access to common file 2015-10-29 10:33:58 -07:00
pfuze.c pfuze: Fix unsigned variable for less-than-zero comparison 2016-01-07 17:48:25 +01:00
pfuze.h pmic:pfuze implement pmic_mode_init 2015-02-11 12:27:46 +01:00
pixis.c Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
pixis.h Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
pq-mds-pib.c powerpc: mpc83xx: remove MPC8360ERDK, EMPC8360EMDS support 2015-01-23 16:53:00 -05:00
pq-mds-pib.h mpc83xx: Split PIB init code from pci.c and add Qoc3 ATM card support 2007-08-16 23:12:11 -05:00
qixis.c freescale/qixis: Add support for booting from SD/QSPI 2016-01-25 08:24:15 -08:00
qixis.h mmc: fsl_esdhc: enable EVDD automatic control for SD/MMC Legacy Adapter Card 2015-11-02 08:50:29 -08:00
sdhc_boot.c block: pass block dev not num to read/write/erase() 2016-01-13 21:05:18 -05:00
sgmii_riser.c powerpc/sgmii: To support PHY link state auto detect in SGMII mode 2012-08-08 18:32:15 -05:00
sgmii_riser.h Fixup SGMII PHY ids in the device tree 2009-02-16 18:05:54 -06:00
sleep.h fsl/sleep: updated the deep sleep framework for QorIQ platforms 2014-12-11 09:41:18 -08:00
sys_eeprom.c board/fsl/common: Fix eeprom system version endianness 2015-07-20 11:44:34 -07:00
via.h Move the MPC8541/MPC8555/MPC8548 CDS board under board/freescale. 2007-12-11 22:34:20 -06:00
vid.c armv8/ls1043aqds: add LS1043AQDS board support 2015-11-30 09:11:10 -08:00
vid.h powerpc/t208xqds: VID support 2014-12-05 08:06:09 -08:00
vsc3316_3308.c powerpc/b4860qds: add workaround for XFI 2014-12-05 08:06:13 -08:00
vsc3316_3308.h powerpc/b4860qds: add workaround for XFI 2014-12-05 08:06:13 -08:00
zm7300.c board/freescale/common: ZM7300 driver 2014-05-13 08:20:31 -07:00
zm7300.h board/freescale/common: ZM7300 driver 2014-05-13 08:20:31 -07:00