mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-31 14:28:52 +09:00
![Thierry Reding](/assets/img/avatar_default.png)
pll_c is not a valid parent for the disp1 clock, so trying to set it will fail. Given that display is not used in U-Boot, remove the init table entry so that disp1 will keep its default parent (clk_m). Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
1281 lines
35 KiB
C
1281 lines
35 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2013-2015
|
|
* NVIDIA Corporation <www.nvidia.com>
|
|
*/
|
|
|
|
/* Tegra210 Clock control functions */
|
|
|
|
#include <common.h>
|
|
#include <errno.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/sysctr.h>
|
|
#include <asm/arch/tegra.h>
|
|
#include <asm/arch-tegra/clk_rst.h>
|
|
#include <asm/arch-tegra/timer.h>
|
|
#include <div64.h>
|
|
#include <fdtdec.h>
|
|
|
|
/*
|
|
* Clock types that we can use as a source. The Tegra210 has muxes for the
|
|
* peripheral clocks, and in most cases there are four options for the clock
|
|
* source. This gives us a clock 'type' and exploits what commonality exists
|
|
* in the device.
|
|
*
|
|
* Letters are obvious, except for T which means CLK_M, and S which means the
|
|
* clock derived from 32KHz. Beware that CLK_M (also called OSC in the
|
|
* datasheet) and PLL_M are different things. The former is the basic
|
|
* clock supplied to the SOC from an external oscillator. The latter is the
|
|
* memory clock PLL.
|
|
*
|
|
* See definitions in clock_id in the header file.
|
|
*/
|
|
enum clock_type_id {
|
|
CLOCK_TYPE_AXPT, /* PLL_A, PLL_X, PLL_P, CLK_M */
|
|
CLOCK_TYPE_MCPA, /* and so on */
|
|
CLOCK_TYPE_MCPT,
|
|
CLOCK_TYPE_PCM,
|
|
CLOCK_TYPE_PCMT,
|
|
CLOCK_TYPE_PDCT,
|
|
CLOCK_TYPE_ACPT,
|
|
CLOCK_TYPE_ASPTE,
|
|
CLOCK_TYPE_PDD2T,
|
|
CLOCK_TYPE_PCST,
|
|
CLOCK_TYPE_DP,
|
|
|
|
CLOCK_TYPE_PC2CC3M,
|
|
CLOCK_TYPE_PC2CC3S_T,
|
|
CLOCK_TYPE_PC2CC3M_T,
|
|
CLOCK_TYPE_PC2CC3M_T16, /* PC2CC3M_T, but w/16-bit divisor (I2C) */
|
|
CLOCK_TYPE_MC2CC3P_A,
|
|
CLOCK_TYPE_M,
|
|
CLOCK_TYPE_MCPTM2C2C3,
|
|
CLOCK_TYPE_PC2CC3T_S,
|
|
CLOCK_TYPE_AC2CC3P_TS2,
|
|
CLOCK_TYPE_PC01C00_C42C41TC40,
|
|
|
|
CLOCK_TYPE_COUNT,
|
|
CLOCK_TYPE_NONE = -1, /* invalid clock type */
|
|
};
|
|
|
|
enum {
|
|
CLOCK_MAX_MUX = 8 /* number of source options for each clock */
|
|
};
|
|
|
|
/*
|
|
* Clock source mux for each clock type. This just converts our enum into
|
|
* a list of mux sources for use by the code.
|
|
*
|
|
* Note:
|
|
* The extra column in each clock source array is used to store the mask
|
|
* bits in its register for the source.
|
|
*/
|
|
#define CLK(x) CLOCK_ID_ ## x
|
|
static enum clock_id clock_source[CLOCK_TYPE_COUNT][CLOCK_MAX_MUX+1] = {
|
|
{ CLK(AUDIO), CLK(XCPU), CLK(PERIPH), CLK(OSC),
|
|
CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE),
|
|
MASK_BITS_31_30},
|
|
{ CLK(MEMORY), CLK(CGENERAL), CLK(PERIPH), CLK(AUDIO),
|
|
CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE),
|
|
MASK_BITS_31_30},
|
|
{ CLK(MEMORY), CLK(CGENERAL), CLK(PERIPH), CLK(OSC),
|
|
CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE),
|
|
MASK_BITS_31_30},
|
|
{ CLK(PERIPH), CLK(CGENERAL), CLK(MEMORY), CLK(NONE),
|
|
CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE),
|
|
MASK_BITS_31_30},
|
|
{ CLK(PERIPH), CLK(CGENERAL), CLK(MEMORY), CLK(OSC),
|
|
CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE),
|
|
MASK_BITS_31_30},
|
|
{ CLK(PERIPH), CLK(DISPLAY), CLK(CGENERAL), CLK(OSC),
|
|
CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE),
|
|
MASK_BITS_31_30},
|
|
{ CLK(AUDIO), CLK(CGENERAL), CLK(PERIPH), CLK(OSC),
|
|
CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE),
|
|
MASK_BITS_31_30},
|
|
{ CLK(AUDIO), CLK(SFROM32KHZ), CLK(PERIPH), CLK(OSC),
|
|
CLK(EPCI), CLK(NONE), CLK(NONE), CLK(NONE),
|
|
MASK_BITS_31_29},
|
|
{ CLK(PERIPH), CLK(NONE), CLK(DISPLAY), CLK(NONE),
|
|
CLK(NONE), CLK(DISPLAY2), CLK(OSC), CLK(NONE),
|
|
MASK_BITS_31_29},
|
|
{ CLK(PERIPH), CLK(CGENERAL), CLK(SFROM32KHZ), CLK(OSC),
|
|
CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE),
|
|
MASK_BITS_31_28},
|
|
/* CLOCK_TYPE_DP */
|
|
{ CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE),
|
|
CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE),
|
|
MASK_BITS_31_28},
|
|
|
|
/* Additional clock types on Tegra114+ */
|
|
/* CLOCK_TYPE_PC2CC3M */
|
|
{ CLK(PERIPH), CLK(CGENERAL2), CLK(CGENERAL), CLK(CGENERAL3),
|
|
CLK(MEMORY), CLK(NONE), CLK(NONE), CLK(NONE),
|
|
MASK_BITS_31_29},
|
|
/* CLOCK_TYPE_PC2CC3S_T */
|
|
{ CLK(PERIPH), CLK(CGENERAL2), CLK(CGENERAL), CLK(CGENERAL3),
|
|
CLK(SFROM32KHZ), CLK(NONE), CLK(OSC), CLK(NONE),
|
|
MASK_BITS_31_29},
|
|
/* CLOCK_TYPE_PC2CC3M_T */
|
|
{ CLK(PERIPH), CLK(CGENERAL2), CLK(CGENERAL), CLK(CGENERAL3),
|
|
CLK(MEMORY), CLK(NONE), CLK(OSC), CLK(NONE),
|
|
MASK_BITS_31_29},
|
|
/* CLOCK_TYPE_PC2CC3M_T, w/16-bit divisor (I2C) */
|
|
{ CLK(PERIPH), CLK(CGENERAL2), CLK(CGENERAL), CLK(CGENERAL3),
|
|
CLK(MEMORY), CLK(NONE), CLK(OSC), CLK(NONE),
|
|
MASK_BITS_31_29},
|
|
/* CLOCK_TYPE_MC2CC3P_A */
|
|
{ CLK(MEMORY), CLK(CGENERAL2), CLK(CGENERAL), CLK(CGENERAL3),
|
|
CLK(PERIPH), CLK(NONE), CLK(AUDIO), CLK(NONE),
|
|
MASK_BITS_31_29},
|
|
/* CLOCK_TYPE_M */
|
|
{ CLK(MEMORY), CLK(NONE), CLK(NONE), CLK(NONE),
|
|
CLK(NONE), CLK(NONE), CLK(NONE), CLK(NONE),
|
|
MASK_BITS_31_30},
|
|
/* CLOCK_TYPE_MCPTM2C2C3 */
|
|
{ CLK(MEMORY), CLK(CGENERAL), CLK(PERIPH), CLK(OSC),
|
|
CLK(MEMORY2), CLK(CGENERAL2), CLK(CGENERAL3), CLK(NONE),
|
|
MASK_BITS_31_29},
|
|
/* CLOCK_TYPE_PC2CC3T_S */
|
|
{ CLK(PERIPH), CLK(CGENERAL2), CLK(CGENERAL), CLK(CGENERAL3),
|
|
CLK(OSC), CLK(NONE), CLK(SFROM32KHZ), CLK(NONE),
|
|
MASK_BITS_31_29},
|
|
/* CLOCK_TYPE_AC2CC3P_TS2 */
|
|
{ CLK(AUDIO), CLK(CGENERAL2), CLK(CGENERAL), CLK(CGENERAL3),
|
|
CLK(PERIPH), CLK(NONE), CLK(OSC), CLK(SRC2),
|
|
MASK_BITS_31_29},
|
|
/* CLOCK_TYPE_PC01C00_C42C41TC40 */
|
|
{ CLK(PERIPH), CLK(CGENERAL_1), CLK(CGENERAL_0), CLK(NONE),
|
|
CLK(CGENERAL4_2), CLK(CGENERAL4_1), CLK(OSC), CLK(CGENERAL4_0),
|
|
MASK_BITS_31_29},
|
|
};
|
|
|
|
/*
|
|
* Clock type for each peripheral clock source. We put the name in each
|
|
* record just so it is easy to match things up
|
|
*/
|
|
#define TYPE(name, type) type
|
|
static enum clock_type_id clock_periph_type[PERIPHC_COUNT] = {
|
|
/* 0x00 */
|
|
TYPE(PERIPHC_I2S2, CLOCK_TYPE_AXPT),
|
|
TYPE(PERIPHC_I2S3, CLOCK_TYPE_AXPT),
|
|
TYPE(PERIPHC_SPDIF_OUT, CLOCK_TYPE_AXPT),
|
|
TYPE(PERIPHC_SPDIF_IN, CLOCK_TYPE_PC2CC3M),
|
|
TYPE(PERIPHC_PWM, CLOCK_TYPE_PC2CC3S_T),
|
|
TYPE(PERIPHC_05h, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_SBC2, CLOCK_TYPE_PC2CC3M_T),
|
|
TYPE(PERIPHC_SBC3, CLOCK_TYPE_PC2CC3M_T),
|
|
|
|
/* 0x08 */
|
|
TYPE(PERIPHC_08h, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_I2C1, CLOCK_TYPE_PC2CC3M_T16),
|
|
TYPE(PERIPHC_I2C5, CLOCK_TYPE_PC2CC3M_T16),
|
|
TYPE(PERIPHC_0bh, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_0ch, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_SBC1, CLOCK_TYPE_PC2CC3M_T),
|
|
TYPE(PERIPHC_DISP1, CLOCK_TYPE_PDD2T),
|
|
TYPE(PERIPHC_DISP2, CLOCK_TYPE_PDD2T),
|
|
|
|
/* 0x10 */
|
|
TYPE(PERIPHC_10h, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_11h, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_VI, CLOCK_TYPE_MC2CC3P_A),
|
|
TYPE(PERIPHC_13h, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_SDMMC1, CLOCK_TYPE_PC2CC3M_T),
|
|
TYPE(PERIPHC_SDMMC2, CLOCK_TYPE_PC2CC3M_T),
|
|
TYPE(PERIPHC_16h, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_17h, CLOCK_TYPE_NONE),
|
|
|
|
/* 0x18 */
|
|
TYPE(PERIPHC_18h, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_SDMMC4, CLOCK_TYPE_PC2CC3M_T),
|
|
TYPE(PERIPHC_VFIR, CLOCK_TYPE_PC2CC3M_T),
|
|
TYPE(PERIPHC_1Bh, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_1Ch, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_HSI, CLOCK_TYPE_PC2CC3M_T),
|
|
TYPE(PERIPHC_UART1, CLOCK_TYPE_PC2CC3M_T),
|
|
TYPE(PERIPHC_UART2, CLOCK_TYPE_PC2CC3M_T),
|
|
|
|
/* 0x20 */
|
|
TYPE(PERIPHC_HOST1X, CLOCK_TYPE_MC2CC3P_A),
|
|
TYPE(PERIPHC_21h, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_22h, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_23h, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_24h, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_25h, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_I2C2, CLOCK_TYPE_PC2CC3M_T16),
|
|
TYPE(PERIPHC_EMC, CLOCK_TYPE_MCPTM2C2C3),
|
|
|
|
/* 0x28 */
|
|
TYPE(PERIPHC_UART3, CLOCK_TYPE_PC2CC3M_T),
|
|
TYPE(PERIPHC_29h, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_VI_SENSOR, CLOCK_TYPE_MC2CC3P_A),
|
|
TYPE(PERIPHC_2bh, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_2ch, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_SBC4, CLOCK_TYPE_PC2CC3M_T),
|
|
TYPE(PERIPHC_I2C3, CLOCK_TYPE_PC2CC3M_T16),
|
|
TYPE(PERIPHC_SDMMC3, CLOCK_TYPE_PC2CC3M_T),
|
|
|
|
/* 0x30 */
|
|
TYPE(PERIPHC_UART4, CLOCK_TYPE_PC2CC3M_T),
|
|
TYPE(PERIPHC_UART5, CLOCK_TYPE_PC2CC3M_T),
|
|
TYPE(PERIPHC_VDE, CLOCK_TYPE_PC2CC3M_T),
|
|
TYPE(PERIPHC_OWR, CLOCK_TYPE_PC2CC3M_T),
|
|
TYPE(PERIPHC_NOR, CLOCK_TYPE_PC2CC3M_T),
|
|
TYPE(PERIPHC_CSITE, CLOCK_TYPE_PC2CC3M_T),
|
|
TYPE(PERIPHC_I2S1, CLOCK_TYPE_AXPT),
|
|
TYPE(PERIPHC_DTV, CLOCK_TYPE_NONE),
|
|
|
|
/* 0x38 */
|
|
TYPE(PERIPHC_38h, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_39h, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_3ah, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_3bh, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_MSENC, CLOCK_TYPE_MC2CC3P_A),
|
|
TYPE(PERIPHC_TSEC, CLOCK_TYPE_PC2CC3M_T),
|
|
TYPE(PERIPHC_3eh, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_OSC, CLOCK_TYPE_NONE),
|
|
|
|
/* 0x40 */
|
|
TYPE(PERIPHC_40h, CLOCK_TYPE_NONE), /* start with 0x3b0 */
|
|
TYPE(PERIPHC_MSELECT, CLOCK_TYPE_PC2CC3M_T),
|
|
TYPE(PERIPHC_TSENSOR, CLOCK_TYPE_PC2CC3T_S),
|
|
TYPE(PERIPHC_I2S4, CLOCK_TYPE_AXPT),
|
|
TYPE(PERIPHC_I2S5, CLOCK_TYPE_AXPT),
|
|
TYPE(PERIPHC_I2C4, CLOCK_TYPE_PC2CC3M_T16),
|
|
TYPE(PERIPHC_SBC5, CLOCK_TYPE_PC2CC3M_T),
|
|
TYPE(PERIPHC_SBC6, CLOCK_TYPE_PC2CC3M_T),
|
|
|
|
/* 0x48 */
|
|
TYPE(PERIPHC_AUDIO, CLOCK_TYPE_AC2CC3P_TS2),
|
|
TYPE(PERIPHC_49h, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_4ah, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_4bh, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_4ch, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_HDA2CODEC2X, CLOCK_TYPE_PC2CC3M_T),
|
|
TYPE(PERIPHC_ACTMON, CLOCK_TYPE_PC2CC3S_T),
|
|
TYPE(PERIPHC_EXTPERIPH1, CLOCK_TYPE_ASPTE),
|
|
|
|
/* 0x50 */
|
|
TYPE(PERIPHC_EXTPERIPH2, CLOCK_TYPE_ASPTE),
|
|
TYPE(PERIPHC_EXTPERIPH3, CLOCK_TYPE_ASPTE),
|
|
TYPE(PERIPHC_52h, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_I2CSLOW, CLOCK_TYPE_PC2CC3S_T),
|
|
TYPE(PERIPHC_SYS, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_55h, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_56h, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_57h, CLOCK_TYPE_NONE),
|
|
|
|
/* 0x58 */
|
|
TYPE(PERIPHC_58h, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_59h, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_5ah, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_5bh, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_SATAOOB, CLOCK_TYPE_PCMT),
|
|
TYPE(PERIPHC_SATA, CLOCK_TYPE_PCMT),
|
|
TYPE(PERIPHC_HDA, CLOCK_TYPE_PC2CC3M_T),
|
|
TYPE(PERIPHC_5fh, CLOCK_TYPE_NONE),
|
|
|
|
/* 0x60 */
|
|
TYPE(PERIPHC_XUSB_CORE_HOST, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_XUSB_FALCON, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_XUSB_FS, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_XUSB_CORE_DEV, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_XUSB_SS, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_CILAB, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_CILCD, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_CILE, CLOCK_TYPE_NONE),
|
|
|
|
/* 0x68 */
|
|
TYPE(PERIPHC_DSIA_LP, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_DSIB_LP, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_ENTROPY, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_DVFS_REF, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_DVFS_SOC, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_TRACECLKIN, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_6eh, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_6fh, CLOCK_TYPE_NONE),
|
|
|
|
/* 0x70 */
|
|
TYPE(PERIPHC_EMC_LATENCY, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_SOC_THERM, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_72h, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_73h, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_74h, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_75h, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_VI_SENSOR2, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_I2C6, CLOCK_TYPE_PC2CC3M_T16),
|
|
|
|
/* 0x78 */
|
|
TYPE(PERIPHC_78h, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_EMC_DLL, CLOCK_TYPE_MCPTM2C2C3),
|
|
TYPE(PERIPHC_7ah, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_CLK72MHZ, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_7ch, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_7dh, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_VIC, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_7Fh, CLOCK_TYPE_NONE),
|
|
|
|
/* 0x80 */
|
|
TYPE(PERIPHC_SDMMC_LEGACY_TM, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_NVDEC, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_NVJPG, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_NVENC, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_84h, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_85h, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_86h, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_87h, CLOCK_TYPE_NONE),
|
|
|
|
/* 0x88 */
|
|
TYPE(PERIPHC_88h, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_89h, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_DMIC3, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_APE, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_QSPI, CLOCK_TYPE_PC01C00_C42C41TC40),
|
|
TYPE(PERIPHC_VI_I2C, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_USB2_HSIC_TRK, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_PEX_SATA_USB_RX_BYP, CLOCK_TYPE_NONE),
|
|
|
|
/* 0x90 */
|
|
TYPE(PERIPHC_MAUD, CLOCK_TYPE_NONE),
|
|
TYPE(PERIPHC_TSECB, CLOCK_TYPE_NONE),
|
|
};
|
|
|
|
/*
|
|
* This array translates a periph_id to a periphc_internal_id
|
|
*
|
|
* Not present/matched up:
|
|
* uint vi_sensor; _VI_SENSOR_0, 0x1A8
|
|
* SPDIF - which is both 0x08 and 0x0c
|
|
*
|
|
*/
|
|
#define NONE(name) (-1)
|
|
#define OFFSET(name, value) PERIPHC_ ## name
|
|
#define INTERNAL_ID(id) (id & 0x000000ff)
|
|
static s8 periph_id_to_internal_id[PERIPH_ID_COUNT] = {
|
|
/* Low word: 31:0 */
|
|
NONE(CPU),
|
|
NONE(COP),
|
|
NONE(TRIGSYS),
|
|
NONE(ISPB),
|
|
NONE(RESERVED4),
|
|
NONE(TMR),
|
|
PERIPHC_UART1,
|
|
PERIPHC_UART2, /* and vfir 0x68 */
|
|
|
|
/* 8 */
|
|
NONE(GPIO),
|
|
PERIPHC_SDMMC2,
|
|
PERIPHC_SPDIF_IN,
|
|
PERIPHC_I2S2,
|
|
PERIPHC_I2C1,
|
|
NONE(RESERVED13),
|
|
PERIPHC_SDMMC1,
|
|
PERIPHC_SDMMC4,
|
|
|
|
/* 16 */
|
|
NONE(TCW),
|
|
PERIPHC_PWM,
|
|
PERIPHC_I2S3,
|
|
NONE(RESERVED19),
|
|
PERIPHC_VI,
|
|
NONE(RESERVED21),
|
|
NONE(USBD),
|
|
NONE(ISP),
|
|
|
|
/* 24 */
|
|
NONE(RESERVED24),
|
|
NONE(RESERVED25),
|
|
PERIPHC_DISP2,
|
|
PERIPHC_DISP1,
|
|
PERIPHC_HOST1X,
|
|
NONE(VCP),
|
|
PERIPHC_I2S1,
|
|
NONE(CACHE2),
|
|
|
|
/* Middle word: 63:32 */
|
|
NONE(MEM),
|
|
NONE(AHBDMA),
|
|
NONE(APBDMA),
|
|
NONE(RESERVED35),
|
|
NONE(RESERVED36),
|
|
NONE(STAT_MON),
|
|
NONE(RESERVED38),
|
|
NONE(FUSE),
|
|
|
|
/* 40 */
|
|
NONE(KFUSE),
|
|
PERIPHC_SBC1, /* SBCx = SPIx */
|
|
PERIPHC_NOR,
|
|
NONE(RESERVED43),
|
|
PERIPHC_SBC2,
|
|
NONE(XIO),
|
|
PERIPHC_SBC3,
|
|
PERIPHC_I2C5,
|
|
|
|
/* 48 */
|
|
NONE(DSI),
|
|
NONE(RESERVED49),
|
|
PERIPHC_HSI,
|
|
NONE(RESERVED51),
|
|
NONE(CSI),
|
|
NONE(RESERVED53),
|
|
PERIPHC_I2C2,
|
|
PERIPHC_UART3,
|
|
|
|
/* 56 */
|
|
NONE(MIPI_CAL),
|
|
PERIPHC_EMC,
|
|
NONE(USB2),
|
|
NONE(USB3),
|
|
NONE(RESERVED60),
|
|
PERIPHC_VDE,
|
|
NONE(BSEA),
|
|
NONE(BSEV),
|
|
|
|
/* Upper word 95:64 */
|
|
NONE(RESERVED64),
|
|
PERIPHC_UART4,
|
|
PERIPHC_UART5,
|
|
PERIPHC_I2C3,
|
|
PERIPHC_SBC4,
|
|
PERIPHC_SDMMC3,
|
|
NONE(PCIE),
|
|
PERIPHC_OWR,
|
|
|
|
/* 72 */
|
|
NONE(AFI),
|
|
PERIPHC_CSITE,
|
|
NONE(PCIEXCLK),
|
|
NONE(AVPUCQ),
|
|
NONE(LA),
|
|
NONE(TRACECLKIN),
|
|
NONE(SOC_THERM),
|
|
NONE(DTV),
|
|
|
|
/* 80 */
|
|
NONE(RESERVED80),
|
|
PERIPHC_I2CSLOW,
|
|
NONE(DSIB),
|
|
PERIPHC_TSEC,
|
|
NONE(RESERVED84),
|
|
NONE(RESERVED85),
|
|
NONE(RESERVED86),
|
|
NONE(EMUCIF),
|
|
|
|
/* 88 */
|
|
NONE(RESERVED88),
|
|
NONE(XUSB_HOST),
|
|
NONE(RESERVED90),
|
|
PERIPHC_MSENC,
|
|
NONE(RESERVED92),
|
|
NONE(RESERVED93),
|
|
NONE(RESERVED94),
|
|
NONE(XUSB_DEV),
|
|
|
|
/* V word: 31:0 */
|
|
NONE(CPUG),
|
|
NONE(CPULP),
|
|
NONE(V_RESERVED2),
|
|
PERIPHC_MSELECT,
|
|
NONE(V_RESERVED4),
|
|
PERIPHC_I2S4,
|
|
PERIPHC_I2S5,
|
|
PERIPHC_I2C4,
|
|
|
|
/* 104 */
|
|
PERIPHC_SBC5,
|
|
PERIPHC_SBC6,
|
|
PERIPHC_AUDIO,
|
|
NONE(APBIF),
|
|
NONE(V_RESERVED12),
|
|
NONE(V_RESERVED13),
|
|
NONE(V_RESERVED14),
|
|
PERIPHC_HDA2CODEC2X,
|
|
|
|
/* 112 */
|
|
NONE(ATOMICS),
|
|
NONE(V_RESERVED17),
|
|
NONE(V_RESERVED18),
|
|
NONE(V_RESERVED19),
|
|
NONE(V_RESERVED20),
|
|
NONE(V_RESERVED21),
|
|
NONE(V_RESERVED22),
|
|
PERIPHC_ACTMON,
|
|
|
|
/* 120 */
|
|
NONE(EXTPERIPH1),
|
|
NONE(EXTPERIPH2),
|
|
NONE(EXTPERIPH3),
|
|
NONE(OOB),
|
|
PERIPHC_SATA,
|
|
PERIPHC_HDA,
|
|
NONE(TZRAM),
|
|
NONE(SE),
|
|
|
|
/* W word: 31:0 */
|
|
NONE(HDA2HDMICODEC),
|
|
NONE(SATACOLD),
|
|
NONE(W_RESERVED2),
|
|
NONE(W_RESERVED3),
|
|
NONE(W_RESERVED4),
|
|
NONE(W_RESERVED5),
|
|
NONE(W_RESERVED6),
|
|
NONE(W_RESERVED7),
|
|
|
|
/* 136 */
|
|
NONE(CEC),
|
|
NONE(W_RESERVED9),
|
|
NONE(W_RESERVED10),
|
|
NONE(W_RESERVED11),
|
|
NONE(W_RESERVED12),
|
|
NONE(W_RESERVED13),
|
|
NONE(XUSB_PADCTL),
|
|
NONE(W_RESERVED15),
|
|
|
|
/* 144 */
|
|
NONE(W_RESERVED16),
|
|
NONE(W_RESERVED17),
|
|
NONE(W_RESERVED18),
|
|
NONE(W_RESERVED19),
|
|
NONE(W_RESERVED20),
|
|
NONE(ENTROPY),
|
|
NONE(DDS),
|
|
NONE(W_RESERVED23),
|
|
|
|
/* 152 */
|
|
NONE(W_RESERVED24),
|
|
NONE(W_RESERVED25),
|
|
NONE(W_RESERVED26),
|
|
NONE(DVFS),
|
|
NONE(XUSB_SS),
|
|
NONE(W_RESERVED29),
|
|
NONE(W_RESERVED30),
|
|
NONE(W_RESERVED31),
|
|
|
|
/* X word: 31:0 */
|
|
NONE(SPARE),
|
|
NONE(X_RESERVED1),
|
|
NONE(X_RESERVED2),
|
|
NONE(X_RESERVED3),
|
|
NONE(CAM_MCLK),
|
|
NONE(CAM_MCLK2),
|
|
PERIPHC_I2C6,
|
|
NONE(X_RESERVED7),
|
|
|
|
/* 168 */
|
|
NONE(X_RESERVED8),
|
|
NONE(X_RESERVED9),
|
|
NONE(X_RESERVED10),
|
|
NONE(VIM2_CLK),
|
|
NONE(X_RESERVED12),
|
|
NONE(X_RESERVED13),
|
|
NONE(EMC_DLL),
|
|
NONE(X_RESERVED15),
|
|
|
|
/* 176 */
|
|
NONE(X_RESERVED16),
|
|
NONE(CLK72MHZ),
|
|
NONE(VIC),
|
|
NONE(X_RESERVED19),
|
|
NONE(X_RESERVED20),
|
|
NONE(DPAUX),
|
|
NONE(SOR0),
|
|
NONE(X_RESERVED23),
|
|
|
|
/* 184 */
|
|
NONE(GPU),
|
|
NONE(X_RESERVED25),
|
|
NONE(X_RESERVED26),
|
|
NONE(X_RESERVED27),
|
|
NONE(X_RESERVED28),
|
|
NONE(X_RESERVED29),
|
|
NONE(X_RESERVED30),
|
|
NONE(X_RESERVED31),
|
|
|
|
/* Y: 192 (192 - 223) */
|
|
NONE(Y_RESERVED0),
|
|
PERIPHC_SDMMC_LEGACY_TM,
|
|
PERIPHC_NVDEC,
|
|
PERIPHC_NVJPG,
|
|
NONE(Y_RESERVED4),
|
|
PERIPHC_DMIC3, /* 197 */
|
|
PERIPHC_APE, /* 198 */
|
|
NONE(Y_RESERVED7),
|
|
|
|
/* 200 */
|
|
NONE(Y_RESERVED8),
|
|
NONE(Y_RESERVED9),
|
|
NONE(Y_RESERVED10),
|
|
NONE(Y_RESERVED11),
|
|
NONE(Y_RESERVED12),
|
|
NONE(Y_RESERVED13),
|
|
NONE(Y_RESERVED14),
|
|
NONE(Y_RESERVED15),
|
|
|
|
/* 208 */
|
|
PERIPHC_VI_I2C, /* 208 */
|
|
NONE(Y_RESERVED17),
|
|
NONE(Y_RESERVED18),
|
|
PERIPHC_QSPI, /* 211 */
|
|
NONE(Y_RESERVED20),
|
|
NONE(Y_RESERVED21),
|
|
NONE(Y_RESERVED22),
|
|
NONE(Y_RESERVED23),
|
|
|
|
/* 216 */
|
|
NONE(Y_RESERVED24),
|
|
NONE(Y_RESERVED25),
|
|
NONE(Y_RESERVED26),
|
|
PERIPHC_NVENC, /* 219 */
|
|
NONE(Y_RESERVED28),
|
|
NONE(Y_RESERVED29),
|
|
NONE(Y_RESERVED30),
|
|
NONE(Y_RESERVED31),
|
|
};
|
|
|
|
/*
|
|
* PLL divider shift/mask tables for all PLL IDs.
|
|
*/
|
|
struct clk_pll_info tegra_pll_info_table[CLOCK_ID_PLL_COUNT] = {
|
|
/*
|
|
* NOTE: If kcp_mask/kvco_mask == 0, they're not used in that PLL (PLLC, etc.)
|
|
* If lock_ena or lock_det are >31, they're not used in that PLL (PLLC, etc.)
|
|
*/
|
|
{ .m_shift = 0, .m_mask = 0xFF, .n_shift = 10, .n_mask = 0xFF, .p_shift = 20, .p_mask = 0x1F,
|
|
.lock_ena = 32, .lock_det = 27, .kcp_shift = 0, .kcp_mask = 0, .kvco_shift = 0, .kvco_mask = 0 }, /* PLLC */
|
|
{ .m_shift = 0, .m_mask = 0xFF, .n_shift = 8, .n_mask = 0xFF, .p_shift = 20, .p_mask = 0x1F,
|
|
.lock_ena = 4, .lock_det = 27, .kcp_shift = 1, .kcp_mask = 3, .kvco_shift = 0, .kvco_mask = 1 }, /* PLLM */
|
|
{ .m_shift = 0, .m_mask = 0xFF, .n_shift = 10, .n_mask = 0xFF, .p_shift = 20, .p_mask = 0x1F,
|
|
.lock_ena = 18, .lock_det = 27, .kcp_shift = 0, .kcp_mask = 3, .kvco_shift = 2, .kvco_mask = 1 }, /* PLLP */
|
|
{ .m_shift = 0, .m_mask = 0xFF, .n_shift = 8, .n_mask = 0xFF, .p_shift = 20, .p_mask = 0x1F,
|
|
.lock_ena = 28, .lock_det = 27, .kcp_shift = 25, .kcp_mask = 3, .kvco_shift = 24, .kvco_mask = 1 }, /* PLLA */
|
|
{ .m_shift = 0, .m_mask = 0xFF, .n_shift = 8, .n_mask = 0xFF, .p_shift = 16, .p_mask = 0x1F,
|
|
.lock_ena = 29, .lock_det = 27, .kcp_shift = 25, .kcp_mask = 3, .kvco_shift = 24, .kvco_mask = 1 }, /* PLLU */
|
|
{ .m_shift = 0, .m_mask = 0xFF, .n_shift = 11, .n_mask = 0xFF, .p_shift = 20, .p_mask = 0x07,
|
|
.lock_ena = 18, .lock_det = 27, .kcp_shift = 23, .kcp_mask = 3, .kvco_shift = 22, .kvco_mask = 1 }, /* PLLD */
|
|
{ .m_shift = 0, .m_mask = 0xFF, .n_shift = 8, .n_mask = 0xFF, .p_shift = 20, .p_mask = 0x1F,
|
|
.lock_ena = 18, .lock_det = 27, .kcp_shift = 1, .kcp_mask = 3, .kvco_shift = 0, .kvco_mask = 1 }, /* PLLX */
|
|
{ .m_shift = 0, .m_mask = 0xFF, .n_shift = 8, .n_mask = 0xFF, .p_shift = 0, .p_mask = 0,
|
|
.lock_ena = 9, .lock_det = 11, .kcp_shift = 6, .kcp_mask = 3, .kvco_shift = 0, .kvco_mask = 1 }, /* PLLE */
|
|
{ .m_shift = 0, .m_mask = 0, .n_shift = 0, .n_mask = 0, .p_shift = 0, .p_mask = 0,
|
|
.lock_ena = 0, .lock_det = 0, .kcp_shift = 0, .kcp_mask = 0, .kvco_shift = 0, .kvco_mask = 0 }, /* PLLS (gone)*/
|
|
{ .m_shift = 0, .m_mask = 0xFF, .n_shift = 8, .n_mask = 0xFF, .p_shift = 19, .p_mask = 0x1F,
|
|
.lock_ena = 30, .lock_det = 27, .kcp_shift = 25, .kcp_mask = 3, .kvco_shift = 24, .kvco_mask = 1 }, /* PLLDP */
|
|
};
|
|
|
|
/*
|
|
* Get the oscillator frequency, from the corresponding hardware configuration
|
|
* field. Note that Tegra30+ support 3 new higher freqs, but we map back
|
|
* to the old T20 freqs. Support for the higher oscillators is TBD.
|
|
*/
|
|
enum clock_osc_freq clock_get_osc_freq(void)
|
|
{
|
|
struct clk_rst_ctlr *clkrst =
|
|
(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
|
|
u32 reg;
|
|
|
|
reg = readl(&clkrst->crc_osc_ctrl);
|
|
reg = (reg & OSC_FREQ_MASK) >> OSC_FREQ_SHIFT;
|
|
/*
|
|
* 0 = 13MHz, 1 = 16.8MHz, 4 = 19.2MHz, 5 = 38.4MHz,
|
|
* 8 = 12MHz, 9 = 48MHz, 12 = 26MHz
|
|
*/
|
|
if (reg == 5) {
|
|
debug("OSC_FREQ is 38.4MHz (%d) ...\n", reg);
|
|
/* Map it to the 5th CLOCK_OSC_ enum, i.e. 4 */
|
|
return 4;
|
|
}
|
|
|
|
/*
|
|
* Map to most common (T20) freqs (except 38.4, handled above):
|
|
* 13/16.8 = 0, 19.2 = 1, 12/48 = 2, 26 = 3
|
|
*/
|
|
return reg >> 2;
|
|
}
|
|
|
|
/* Returns a pointer to the clock source register for a peripheral */
|
|
u32 *get_periph_source_reg(enum periph_id periph_id)
|
|
{
|
|
struct clk_rst_ctlr *clkrst =
|
|
(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
|
|
enum periphc_internal_id internal_id;
|
|
|
|
/* Coresight is a special case */
|
|
if (periph_id == PERIPH_ID_CSI)
|
|
return &clkrst->crc_clk_src[PERIPH_ID_CSI+1];
|
|
|
|
assert(periph_id >= PERIPH_ID_FIRST && periph_id < PERIPH_ID_COUNT);
|
|
internal_id = INTERNAL_ID(periph_id_to_internal_id[periph_id]);
|
|
assert(internal_id != -1);
|
|
|
|
if (internal_id < PERIPHC_VW_FIRST)
|
|
/* L, H, U */
|
|
return &clkrst->crc_clk_src[internal_id];
|
|
|
|
if (internal_id < PERIPHC_X_FIRST) {
|
|
/* VW */
|
|
internal_id -= PERIPHC_VW_FIRST;
|
|
return &clkrst->crc_clk_src_vw[internal_id];
|
|
}
|
|
|
|
if (internal_id < PERIPHC_Y_FIRST) {
|
|
/* X */
|
|
internal_id -= PERIPHC_X_FIRST;
|
|
return &clkrst->crc_clk_src_x[internal_id];
|
|
}
|
|
|
|
/* Y */
|
|
internal_id -= PERIPHC_Y_FIRST;
|
|
return &clkrst->crc_clk_src_y[internal_id];
|
|
}
|
|
|
|
int get_periph_clock_info(enum periph_id periph_id, int *mux_bits,
|
|
int *divider_bits, int *type)
|
|
{
|
|
enum periphc_internal_id internal_id;
|
|
|
|
if (!clock_periph_id_isvalid(periph_id))
|
|
return -1;
|
|
|
|
internal_id = periph_id_to_internal_id[periph_id];
|
|
if (!periphc_internal_id_isvalid(internal_id))
|
|
return -1;
|
|
|
|
*type = clock_periph_type[internal_id];
|
|
if (!clock_type_id_isvalid(*type))
|
|
return -1;
|
|
|
|
*mux_bits = clock_source[*type][CLOCK_MAX_MUX];
|
|
|
|
if (*type == CLOCK_TYPE_PC2CC3M_T16)
|
|
*divider_bits = 16;
|
|
else
|
|
*divider_bits = 8;
|
|
|
|
return 0;
|
|
}
|
|
|
|
enum clock_id get_periph_clock_id(enum periph_id periph_id, int source)
|
|
{
|
|
enum periphc_internal_id internal_id;
|
|
int type;
|
|
|
|
if (!clock_periph_id_isvalid(periph_id))
|
|
return CLOCK_ID_NONE;
|
|
|
|
internal_id = periph_id_to_internal_id[periph_id];
|
|
if (!periphc_internal_id_isvalid(internal_id))
|
|
return CLOCK_ID_NONE;
|
|
|
|
type = clock_periph_type[internal_id];
|
|
if (!clock_type_id_isvalid(type))
|
|
return CLOCK_ID_NONE;
|
|
|
|
return clock_source[type][source];
|
|
}
|
|
|
|
/**
|
|
* Given a peripheral ID and the required source clock, this returns which
|
|
* value should be programmed into the source mux for that peripheral.
|
|
*
|
|
* There is special code here to handle the one source type with 5 sources.
|
|
*
|
|
* @param periph_id peripheral to start
|
|
* @param source PLL id of required parent clock
|
|
* @param mux_bits Set to number of bits in mux register: 2 or 4
|
|
* @param divider_bits Set to number of divider bits (8 or 16)
|
|
* @return mux value (0-4, or -1 if not found)
|
|
*/
|
|
int get_periph_clock_source(enum periph_id periph_id,
|
|
enum clock_id parent, int *mux_bits, int *divider_bits)
|
|
{
|
|
enum clock_type_id type;
|
|
int mux, err;
|
|
|
|
err = get_periph_clock_info(periph_id, mux_bits, divider_bits, &type);
|
|
assert(!err);
|
|
|
|
for (mux = 0; mux < CLOCK_MAX_MUX; mux++)
|
|
if (clock_source[type][mux] == parent)
|
|
return mux;
|
|
|
|
/* if we get here, either us or the caller has made a mistake */
|
|
printf("Caller requested bad clock: periph=%d, parent=%d\n", periph_id,
|
|
parent);
|
|
return -1;
|
|
}
|
|
|
|
void clock_set_enable(enum periph_id periph_id, int enable)
|
|
{
|
|
struct clk_rst_ctlr *clkrst =
|
|
(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
|
|
u32 *clk;
|
|
u32 reg;
|
|
|
|
/* Enable/disable the clock to this peripheral */
|
|
assert(clock_periph_id_isvalid(periph_id));
|
|
if ((int)periph_id < (int)PERIPH_ID_VW_FIRST)
|
|
clk = &clkrst->crc_clk_out_enb[PERIPH_REG(periph_id)];
|
|
else if ((int)periph_id < (int)PERIPH_ID_X_FIRST)
|
|
clk = &clkrst->crc_clk_out_enb_vw[PERIPH_REG(periph_id)];
|
|
else if ((int)periph_id < (int)PERIPH_ID_Y_FIRST)
|
|
clk = &clkrst->crc_clk_out_enb_x;
|
|
else
|
|
clk = &clkrst->crc_clk_out_enb_y;
|
|
|
|
reg = readl(clk);
|
|
if (enable)
|
|
reg |= PERIPH_MASK(periph_id);
|
|
else
|
|
reg &= ~PERIPH_MASK(periph_id);
|
|
writel(reg, clk);
|
|
}
|
|
|
|
void reset_set_enable(enum periph_id periph_id, int enable)
|
|
{
|
|
struct clk_rst_ctlr *clkrst =
|
|
(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
|
|
u32 *reset;
|
|
u32 reg;
|
|
|
|
/* Enable/disable reset to the peripheral */
|
|
assert(clock_periph_id_isvalid(periph_id));
|
|
if (periph_id < PERIPH_ID_VW_FIRST)
|
|
reset = &clkrst->crc_rst_dev[PERIPH_REG(periph_id)];
|
|
else if ((int)periph_id < (int)PERIPH_ID_X_FIRST)
|
|
reset = &clkrst->crc_rst_dev_vw[PERIPH_REG(periph_id)];
|
|
else if ((int)periph_id < (int)PERIPH_ID_Y_FIRST)
|
|
reset = &clkrst->crc_rst_devices_x;
|
|
else
|
|
reset = &clkrst->crc_rst_devices_y;
|
|
|
|
reg = readl(reset);
|
|
if (enable)
|
|
reg |= PERIPH_MASK(periph_id);
|
|
else
|
|
reg &= ~PERIPH_MASK(periph_id);
|
|
writel(reg, reset);
|
|
}
|
|
|
|
#ifdef CONFIG_OF_CONTROL
|
|
/*
|
|
* Convert a device tree clock ID to our peripheral ID. They are mostly
|
|
* the same but we are very cautious so we check that a valid clock ID is
|
|
* provided.
|
|
*
|
|
* @param clk_id Clock ID according to tegra210 device tree binding
|
|
* @return peripheral ID, or PERIPH_ID_NONE if the clock ID is invalid
|
|
*/
|
|
enum periph_id clk_id_to_periph_id(int clk_id)
|
|
{
|
|
if (clk_id > PERIPH_ID_COUNT)
|
|
return PERIPH_ID_NONE;
|
|
|
|
switch (clk_id) {
|
|
case PERIPH_ID_RESERVED4:
|
|
case PERIPH_ID_RESERVED25:
|
|
case PERIPH_ID_RESERVED35:
|
|
case PERIPH_ID_RESERVED36:
|
|
case PERIPH_ID_RESERVED38:
|
|
case PERIPH_ID_RESERVED43:
|
|
case PERIPH_ID_RESERVED49:
|
|
case PERIPH_ID_RESERVED53:
|
|
case PERIPH_ID_RESERVED64:
|
|
case PERIPH_ID_RESERVED84:
|
|
case PERIPH_ID_RESERVED85:
|
|
case PERIPH_ID_RESERVED86:
|
|
case PERIPH_ID_RESERVED88:
|
|
case PERIPH_ID_RESERVED90:
|
|
case PERIPH_ID_RESERVED92:
|
|
case PERIPH_ID_RESERVED93:
|
|
case PERIPH_ID_RESERVED94:
|
|
case PERIPH_ID_V_RESERVED2:
|
|
case PERIPH_ID_V_RESERVED4:
|
|
case PERIPH_ID_V_RESERVED17:
|
|
case PERIPH_ID_V_RESERVED18:
|
|
case PERIPH_ID_V_RESERVED19:
|
|
case PERIPH_ID_V_RESERVED20:
|
|
case PERIPH_ID_V_RESERVED21:
|
|
case PERIPH_ID_V_RESERVED22:
|
|
case PERIPH_ID_W_RESERVED2:
|
|
case PERIPH_ID_W_RESERVED3:
|
|
case PERIPH_ID_W_RESERVED4:
|
|
case PERIPH_ID_W_RESERVED5:
|
|
case PERIPH_ID_W_RESERVED6:
|
|
case PERIPH_ID_W_RESERVED7:
|
|
case PERIPH_ID_W_RESERVED9:
|
|
case PERIPH_ID_W_RESERVED10:
|
|
case PERIPH_ID_W_RESERVED11:
|
|
case PERIPH_ID_W_RESERVED12:
|
|
case PERIPH_ID_W_RESERVED13:
|
|
case PERIPH_ID_W_RESERVED15:
|
|
case PERIPH_ID_W_RESERVED16:
|
|
case PERIPH_ID_W_RESERVED17:
|
|
case PERIPH_ID_W_RESERVED18:
|
|
case PERIPH_ID_W_RESERVED19:
|
|
case PERIPH_ID_W_RESERVED20:
|
|
case PERIPH_ID_W_RESERVED23:
|
|
case PERIPH_ID_W_RESERVED29:
|
|
case PERIPH_ID_W_RESERVED30:
|
|
case PERIPH_ID_W_RESERVED31:
|
|
return PERIPH_ID_NONE;
|
|
default:
|
|
return clk_id;
|
|
}
|
|
}
|
|
#endif /* CONFIG_OF_CONTROL */
|
|
|
|
/*
|
|
* T210 redefines PLLP_OUT2 as PLLP_VCO/DIVP, so do different OUT1-4 setup here.
|
|
* PLLP_BASE/MISC/etc. is already set up for 408MHz in the BootROM.
|
|
*/
|
|
void tegra210_setup_pllp(void)
|
|
{
|
|
struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
|
|
u32 reg;
|
|
|
|
/* Set PLLP_OUT1, 3 & 4 freqs to 9.6, 102 & 204MHz */
|
|
|
|
/* OUT1 */
|
|
/* Assert RSTN before enable */
|
|
reg = PLLP_OUT1_RSTN_EN;
|
|
writel(reg, &clkrst->crc_pll[CLOCK_ID_PERIPH].pll_out[0]);
|
|
/* Set divisor and reenable */
|
|
reg = (IN_408_OUT_9_6_DIVISOR << PLLP_OUT1_RATIO)
|
|
| PLLP_OUT1_OVR | PLLP_OUT1_CLKEN | PLLP_OUT1_RSTN_DIS;
|
|
writel(reg, &clkrst->crc_pll[CLOCK_ID_PERIPH].pll_out[0]);
|
|
|
|
/* OUT3, 4 */
|
|
/* Assert RSTN before enable */
|
|
reg = PLLP_OUT4_RSTN_EN | PLLP_OUT3_RSTN_EN;
|
|
writel(reg, &clkrst->crc_pll[CLOCK_ID_PERIPH].pll_out[1]);
|
|
/* Set divisor and reenable */
|
|
reg = (IN_408_OUT_204_DIVISOR << PLLP_OUT4_RATIO)
|
|
| PLLP_OUT4_OVR | PLLP_OUT4_CLKEN | PLLP_OUT4_RSTN_DIS
|
|
| (IN_408_OUT_102_DIVISOR << PLLP_OUT3_RATIO)
|
|
| PLLP_OUT3_OVR | PLLP_OUT3_CLKEN | PLLP_OUT3_RSTN_DIS;
|
|
writel(reg, &clkrst->crc_pll[CLOCK_ID_PERIPH].pll_out[1]);
|
|
|
|
/*
|
|
* NOTE: If you want to change PLLP_OUT2 away from 204MHz,
|
|
* you can change PLLP_BASE DIVP here. Currently defaults
|
|
* to 1, which is 2^1, or 2, so PLLP_OUT2 is 204MHz.
|
|
* See Table 13 in section 5.1.4 in T210 TRM for more info.
|
|
*/
|
|
}
|
|
|
|
void clock_early_init(void)
|
|
{
|
|
struct clk_rst_ctlr *clkrst =
|
|
(struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
|
|
struct clk_pll_info *pllinfo = &tegra_pll_info_table[CLOCK_ID_DISPLAY];
|
|
u32 data;
|
|
|
|
tegra210_setup_pllp();
|
|
|
|
/*
|
|
* PLLC output frequency set to 600Mhz
|
|
* PLLD output frequency set to 925Mhz
|
|
*/
|
|
switch (clock_get_osc_freq()) {
|
|
case CLOCK_OSC_FREQ_12_0: /* OSC is 12Mhz */
|
|
clock_set_rate(CLOCK_ID_CGENERAL, 600, 12, 0, 8);
|
|
clock_set_rate(CLOCK_ID_DISPLAY, 925, 12, 0, 12);
|
|
break;
|
|
|
|
case CLOCK_OSC_FREQ_26_0: /* OSC is 26Mhz */
|
|
clock_set_rate(CLOCK_ID_CGENERAL, 600, 26, 0, 8);
|
|
clock_set_rate(CLOCK_ID_DISPLAY, 925, 26, 0, 12);
|
|
break;
|
|
|
|
case CLOCK_OSC_FREQ_13_0: /* OSC is 13Mhz */
|
|
clock_set_rate(CLOCK_ID_CGENERAL, 600, 13, 0, 8);
|
|
clock_set_rate(CLOCK_ID_DISPLAY, 925, 13, 0, 12);
|
|
break;
|
|
case CLOCK_OSC_FREQ_19_2:
|
|
clock_set_rate(CLOCK_ID_CGENERAL, 125, 4, 0, 0);
|
|
clock_set_rate(CLOCK_ID_DISPLAY, 96, 2, 0, 12);
|
|
break;
|
|
case CLOCK_OSC_FREQ_38_4:
|
|
clock_set_rate(CLOCK_ID_CGENERAL, 125, 8, 0, 0);
|
|
clock_set_rate(CLOCK_ID_DISPLAY, 96, 4, 0, 0);
|
|
break;
|
|
default:
|
|
/*
|
|
* These are not supported. It is too early to print a
|
|
* message and the UART likely won't work anyway due to the
|
|
* oscillator being wrong.
|
|
*/
|
|
break;
|
|
}
|
|
|
|
/* PLLC_MISC1: Turn IDDQ off. NOTE: T210 PLLC_MISC_1 maps to pll_misc */
|
|
clrbits_le32(&clkrst->crc_pll[CLOCK_ID_CGENERAL].pll_misc,
|
|
(1 << PLLC_IDDQ));
|
|
udelay(2);
|
|
|
|
/*
|
|
* PLLC_MISC: Take PLLC out of reset. NOTE: T210 PLLC_MISC maps
|
|
* to pll_out[1]
|
|
*/
|
|
clrbits_le32(&clkrst->crc_pll[CLOCK_ID_CGENERAL].pll_out[1],
|
|
(1 << PLLC_RESET));
|
|
udelay(2);
|
|
|
|
/* PLLD_MISC: Set CLKENABLE and LOCK_DETECT bits */
|
|
data = (1 << PLLD_ENABLE_CLK) | (1 << pllinfo->lock_ena);
|
|
writel(data, &clkrst->crc_pll[CLOCK_ID_DISPLAY].pll_misc);
|
|
udelay(2);
|
|
}
|
|
|
|
unsigned int clk_m_get_rate(unsigned parent_rate)
|
|
{
|
|
struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
|
|
u32 value, div;
|
|
|
|
value = readl(&clkrst->crc_spare_reg0);
|
|
div = ((value >> 2) & 0x3) + 1;
|
|
|
|
return parent_rate / div;
|
|
}
|
|
|
|
void arch_timer_init(void)
|
|
{
|
|
struct sysctr_ctlr *sysctr = (struct sysctr_ctlr *)NV_PA_TSC_BASE;
|
|
u32 freq, val;
|
|
|
|
freq = clock_get_rate(CLOCK_ID_CLK_M);
|
|
debug("%s: clk_m freq is %dHz [0x%08X]\n", __func__, freq, freq);
|
|
|
|
if (current_el() == 3)
|
|
asm("msr cntfrq_el0, %0\n" : : "r" (freq));
|
|
|
|
/* Only Tegra114+ has the System Counter regs */
|
|
debug("%s: setting CNTFID0 to 0x%08X\n", __func__, freq);
|
|
writel(freq, &sysctr->cntfid0);
|
|
|
|
val = readl(&sysctr->cntcr);
|
|
val |= TSC_CNTCR_ENABLE | TSC_CNTCR_HDBG;
|
|
writel(val, &sysctr->cntcr);
|
|
debug("%s: TSC CNTCR = 0x%08X\n", __func__, val);
|
|
}
|
|
|
|
#define PLLREFE_MISC 0x4c8
|
|
#define PLLREFE_MISC_LOCK BIT(27)
|
|
#define PLLREFE_MISC_IDDQ BIT(24)
|
|
|
|
#define PLLREFE_BASE 0x4c4
|
|
#define PLLREFE_BASE_BYPASS BIT(31)
|
|
#define PLLREFE_BASE_ENABLE BIT(30)
|
|
#define PLLREFE_BASE_REF_DIS BIT(29)
|
|
#define PLLREFE_BASE_KCP(kcp) (((kcp) & 0x3) << 27)
|
|
#define PLLREFE_BASE_KVCO BIT(26)
|
|
#define PLLREFE_BASE_DIVP(p) (((p) & 0x1f) << 16)
|
|
#define PLLREFE_BASE_DIVN(n) (((n) & 0xff) << 8)
|
|
#define PLLREFE_BASE_DIVM(m) (((m) & 0xff) << 0)
|
|
|
|
static int tegra_pllref_enable(void)
|
|
{
|
|
u32 value;
|
|
unsigned long start;
|
|
|
|
/*
|
|
* This sequence comes from Tegra X1 TRM section "Cold Boot, with no
|
|
* Recovery Mode or Boot from USB", sub-section "PLLREFE".
|
|
*/
|
|
|
|
value = readl(NV_PA_CLK_RST_BASE + PLLREFE_MISC);
|
|
value &= ~PLLREFE_MISC_IDDQ;
|
|
writel(value, NV_PA_CLK_RST_BASE + PLLREFE_MISC);
|
|
|
|
udelay(5);
|
|
|
|
value = PLLREFE_BASE_ENABLE |
|
|
PLLREFE_BASE_KCP(0) |
|
|
PLLREFE_BASE_DIVP(0) |
|
|
PLLREFE_BASE_DIVN(0x41) |
|
|
PLLREFE_BASE_DIVM(4);
|
|
writel(value, NV_PA_CLK_RST_BASE + PLLREFE_BASE);
|
|
|
|
debug("waiting for pllrefe lock\n");
|
|
start = get_timer(0);
|
|
while (get_timer(start) < 250) {
|
|
value = readl(NV_PA_CLK_RST_BASE + PLLREFE_MISC);
|
|
if (value & PLLREFE_MISC_LOCK)
|
|
break;
|
|
}
|
|
if (!(value & PLLREFE_MISC_LOCK)) {
|
|
debug(" timeout\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
debug(" done\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define PLLE_SS_CNTL 0x68
|
|
#define PLLE_SS_CNTL_SSCINCINTR(x) (((x) & 0x3f) << 24)
|
|
#define PLLE_SS_CNTL_SSCINC(x) (((x) & 0xff) << 16)
|
|
#define PLLE_SS_CNTL_SSCINVERT (1 << 15)
|
|
#define PLLE_SS_CNTL_SSCCENTER (1 << 14)
|
|
#define PLLE_SS_CNTL_SSCBYP (1 << 12)
|
|
#define PLLE_SS_CNTL_INTERP_RESET (1 << 11)
|
|
#define PLLE_SS_CNTL_BYPASS_SS (1 << 10)
|
|
#define PLLE_SS_CNTL_SSCMAX(x) (((x) & 0x1ff) << 0)
|
|
|
|
#define PLLE_BASE 0x0e8
|
|
#define PLLE_BASE_ENABLE (1 << 31)
|
|
#define PLLE_BASE_PLDIV_CML(x) (((x) & 0x1f) << 24)
|
|
#define PLLE_BASE_NDIV(x) (((x) & 0xff) << 8)
|
|
#define PLLE_BASE_MDIV(x) (((x) & 0xff) << 0)
|
|
|
|
#define PLLE_MISC 0x0ec
|
|
#define PLLE_MISC_IDDQ_SWCTL (1 << 14)
|
|
#define PLLE_MISC_IDDQ_OVERRIDE_VALUE (1 << 13)
|
|
#define PLLE_MISC_LOCK (1 << 11)
|
|
#define PLLE_PTS (1 << 8)
|
|
#define PLLE_MISC_KCP(x) (((x) & 0x3) << 6)
|
|
#define PLLE_MISC_VREG_CTRL(x) (((x) & 0x3) << 2)
|
|
#define PLLE_MISC_KVCO (1 << 0)
|
|
|
|
#define PLLE_AUX 0x48c
|
|
#define PLLE_AUX_SS_SEQ_INCLUDE (1 << 31)
|
|
#define PLLE_AUX_REF_SEL_PLLREFE (1 << 28)
|
|
#define PLLE_AUX_SEQ_ENABLE (1 << 24)
|
|
#define PLLE_AUX_SS_SWCTL (1 << 6)
|
|
#define PLLE_AUX_ENABLE_SWCTL (1 << 4)
|
|
#define PLLE_AUX_USE_LOCKDET (1 << 3)
|
|
|
|
int tegra_plle_enable(void)
|
|
{
|
|
u32 value;
|
|
unsigned long start;
|
|
|
|
/* PLLREF feeds PLLE */
|
|
tegra_pllref_enable();
|
|
|
|
/*
|
|
* This sequence comes from Tegra X1 TRM section "Cold Boot, with no
|
|
* Recovery Mode or Boot from USB", sub-section "PLLEs".
|
|
*/
|
|
|
|
/* 1. Select XTAL as the source */
|
|
|
|
value = readl(NV_PA_CLK_RST_BASE + PLLE_AUX);
|
|
value &= ~PLLE_AUX_REF_SEL_PLLREFE;
|
|
writel(value, NV_PA_CLK_RST_BASE + PLLE_AUX);
|
|
|
|
value = readl(NV_PA_CLK_RST_BASE + PLLE_MISC);
|
|
value &= ~PLLE_MISC_IDDQ_OVERRIDE_VALUE;
|
|
writel(value, NV_PA_CLK_RST_BASE + PLLE_MISC);
|
|
|
|
/* 2. Wait 5 us */
|
|
udelay(5);
|
|
|
|
/*
|
|
* 3. Program the following registers to generate a low jitter 100MHz
|
|
* clock.
|
|
*/
|
|
|
|
value = readl(NV_PA_CLK_RST_BASE + PLLE_BASE);
|
|
value &= ~PLLE_BASE_PLDIV_CML(0x1f);
|
|
value &= ~PLLE_BASE_NDIV(0xff);
|
|
value &= ~PLLE_BASE_MDIV(0xff);
|
|
value |= PLLE_BASE_PLDIV_CML(0xe);
|
|
value |= PLLE_BASE_NDIV(0x7d);
|
|
value |= PLLE_BASE_MDIV(2);
|
|
writel(value, NV_PA_CLK_RST_BASE + PLLE_BASE);
|
|
|
|
value = readl(NV_PA_CLK_RST_BASE + PLLE_MISC);
|
|
value |= PLLE_PTS;
|
|
value &= ~PLLE_MISC_KCP(3);
|
|
value &= ~PLLE_MISC_VREG_CTRL(3);
|
|
value &= ~PLLE_MISC_KVCO;
|
|
writel(value, NV_PA_CLK_RST_BASE + PLLE_MISC);
|
|
|
|
value = readl(NV_PA_CLK_RST_BASE + PLLE_BASE);
|
|
value |= PLLE_BASE_ENABLE;
|
|
writel(value, NV_PA_CLK_RST_BASE + PLLE_BASE);
|
|
|
|
/* 4. Wait for LOCK */
|
|
|
|
debug("waiting for plle lock\n");
|
|
start = get_timer(0);
|
|
while (get_timer(start) < 250) {
|
|
value = readl(NV_PA_CLK_RST_BASE + PLLE_MISC);
|
|
if (value & PLLE_MISC_LOCK)
|
|
break;
|
|
}
|
|
if (!(value & PLLE_MISC_LOCK)) {
|
|
debug(" timeout\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
debug(" done\n");
|
|
|
|
/* 5. Enable SSA */
|
|
|
|
value = readl(NV_PA_CLK_RST_BASE + PLLE_SS_CNTL);
|
|
value &= ~PLLE_SS_CNTL_SSCINC(0xff);
|
|
value |= PLLE_SS_CNTL_SSCINC(1);
|
|
value &= ~PLLE_SS_CNTL_SSCINCINTR(0x3f);
|
|
value |= PLLE_SS_CNTL_SSCINCINTR(0x23);
|
|
value &= ~PLLE_SS_CNTL_SSCMAX(0x1fff);
|
|
value |= PLLE_SS_CNTL_SSCMAX(0x21);
|
|
value &= ~PLLE_SS_CNTL_SSCINVERT;
|
|
value &= ~PLLE_SS_CNTL_SSCCENTER;
|
|
value &= ~PLLE_SS_CNTL_BYPASS_SS;
|
|
value &= ~PLLE_SS_CNTL_SSCBYP;
|
|
writel(value, NV_PA_CLK_RST_BASE + PLLE_SS_CNTL);
|
|
|
|
/* 6. Wait 300 ns */
|
|
|
|
udelay(1);
|
|
value &= ~PLLE_SS_CNTL_INTERP_RESET;
|
|
writel(value, NV_PA_CLK_RST_BASE + PLLE_SS_CNTL);
|
|
|
|
/* 7. Enable HW power sequencer for PLLE */
|
|
|
|
value = readl(NV_PA_CLK_RST_BASE + PLLE_MISC);
|
|
value &= ~PLLE_MISC_IDDQ_SWCTL;
|
|
writel(value, NV_PA_CLK_RST_BASE + PLLE_MISC);
|
|
|
|
value = readl(NV_PA_CLK_RST_BASE + PLLE_AUX);
|
|
value &= ~PLLE_AUX_SS_SWCTL;
|
|
value &= ~PLLE_AUX_ENABLE_SWCTL;
|
|
value |= PLLE_AUX_SS_SEQ_INCLUDE;
|
|
value |= PLLE_AUX_USE_LOCKDET;
|
|
writel(value, NV_PA_CLK_RST_BASE + PLLE_AUX);
|
|
|
|
/* 8. Wait 1 us */
|
|
|
|
udelay(1);
|
|
value |= PLLE_AUX_SEQ_ENABLE;
|
|
writel(value, NV_PA_CLK_RST_BASE + PLLE_AUX);
|
|
|
|
return 0;
|
|
}
|
|
|
|
struct periph_clk_init periph_clk_init_table[] = {
|
|
{ PERIPH_ID_SBC1, CLOCK_ID_PERIPH },
|
|
{ PERIPH_ID_SBC2, CLOCK_ID_PERIPH },
|
|
{ PERIPH_ID_SBC3, CLOCK_ID_PERIPH },
|
|
{ PERIPH_ID_SBC4, CLOCK_ID_PERIPH },
|
|
{ PERIPH_ID_SBC5, CLOCK_ID_PERIPH },
|
|
{ PERIPH_ID_SBC6, CLOCK_ID_PERIPH },
|
|
{ PERIPH_ID_HOST1X, CLOCK_ID_PERIPH },
|
|
{ PERIPH_ID_SDMMC1, CLOCK_ID_PERIPH },
|
|
{ PERIPH_ID_SDMMC2, CLOCK_ID_PERIPH },
|
|
{ PERIPH_ID_SDMMC3, CLOCK_ID_PERIPH },
|
|
{ PERIPH_ID_SDMMC4, CLOCK_ID_PERIPH },
|
|
{ PERIPH_ID_PWM, CLOCK_ID_SFROM32KHZ },
|
|
{ PERIPH_ID_I2C1, CLOCK_ID_PERIPH },
|
|
{ PERIPH_ID_I2C2, CLOCK_ID_PERIPH },
|
|
{ PERIPH_ID_I2C3, CLOCK_ID_PERIPH },
|
|
{ PERIPH_ID_I2C4, CLOCK_ID_PERIPH },
|
|
{ PERIPH_ID_I2C5, CLOCK_ID_PERIPH },
|
|
{ PERIPH_ID_I2C6, CLOCK_ID_PERIPH },
|
|
{ -1, },
|
|
};
|