mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-18 16:08:53 +09:00
![Tom Rini](/assets/img/avatar_default.png)
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
1122 lines
31 KiB
C
1122 lines
31 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2010-2013 Freescale Semiconductor, Inc.
|
|
* Copyright (C) 2013, Boundary Devices <info@boundarydevices.com>
|
|
* Copyright (C) 2014-2016, Toradex AG
|
|
* copied from nitrogen6x
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/crm_regs.h>
|
|
#include <asm/arch/imx-regs.h>
|
|
#include <asm/arch/iomux.h>
|
|
#include <asm/arch/mx6-pins.h>
|
|
#include <asm/arch/mx6-ddr.h>
|
|
#include <asm/arch/mxc_hdmi.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/bootm.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/mach-imx/iomux-v3.h>
|
|
#include <asm/mach-imx/mxc_i2c.h>
|
|
#include <asm/mach-imx/sata.h>
|
|
#include <asm/mach-imx/boot_mode.h>
|
|
#include <asm/mach-imx/video.h>
|
|
#include <asm/io.h>
|
|
#include <dm/platform_data/serial_mxc.h>
|
|
#include <dm/platdata.h>
|
|
#include <fsl_esdhc.h>
|
|
#include <i2c.h>
|
|
#include <input.h>
|
|
#include <imx_thermal.h>
|
|
#include <linux/errno.h>
|
|
#include <malloc.h>
|
|
#include <micrel.h>
|
|
#include <miiphy.h>
|
|
#include <mmc.h>
|
|
#include <netdev.h>
|
|
|
|
#include "../common/tdx-cfg-block.h"
|
|
#ifdef CONFIG_TDX_CMD_IMX_MFGR
|
|
#include "pf0100.h"
|
|
#endif
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
|
|
PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
|
|
PAD_CTL_SRE_FAST | PAD_CTL_HYS)
|
|
|
|
#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | \
|
|
PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm | \
|
|
PAD_CTL_SRE_FAST | PAD_CTL_HYS)
|
|
|
|
#define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
|
|
PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
|
|
|
|
#define SPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_SPEED_MED | \
|
|
PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
|
|
|
|
#define BUTTON_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
|
|
PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
|
|
|
|
#define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
|
|
PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \
|
|
PAD_CTL_ODE | PAD_CTL_SRE_FAST)
|
|
|
|
#define WEAK_PULLUP (PAD_CTL_PUS_100K_UP | \
|
|
PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \
|
|
PAD_CTL_SRE_SLOW)
|
|
|
|
#define NO_PULLUP ( \
|
|
PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \
|
|
PAD_CTL_SRE_SLOW)
|
|
|
|
#define WEAK_PULLDOWN (PAD_CTL_PUS_100K_DOWN | \
|
|
PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
|
|
PAD_CTL_HYS | PAD_CTL_SRE_SLOW)
|
|
|
|
#define OUTPUT_40OHM (PAD_CTL_SPEED_MED|PAD_CTL_DSE_40ohm)
|
|
|
|
#define OUTPUT_RGB (PAD_CTL_SPEED_MED|PAD_CTL_DSE_60ohm|PAD_CTL_SRE_FAST)
|
|
|
|
int dram_init(void)
|
|
{
|
|
/* use the DDR controllers configured size */
|
|
gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
|
|
(ulong)imx_ddr_size());
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Colibri UARTA */
|
|
iomux_v3_cfg_t const uart1_pads[] = {
|
|
MX6_PAD_CSI0_DAT10__UART1_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
|
|
MX6_PAD_CSI0_DAT11__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
|
|
};
|
|
|
|
#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
|
|
/* Colibri I2C */
|
|
struct i2c_pads_info i2c_pad_info1 = {
|
|
.scl = {
|
|
.i2c_mode = MX6_PAD_GPIO_3__I2C3_SCL | PC,
|
|
.gpio_mode = MX6_PAD_GPIO_3__GPIO1_IO03 | PC,
|
|
.gp = IMX_GPIO_NR(1, 3)
|
|
},
|
|
.sda = {
|
|
.i2c_mode = MX6_PAD_GPIO_6__I2C3_SDA | PC,
|
|
.gpio_mode = MX6_PAD_GPIO_6__GPIO1_IO06 | PC,
|
|
.gp = IMX_GPIO_NR(1, 6)
|
|
}
|
|
};
|
|
|
|
/* Colibri local, PMIC, SGTL5000, STMPE811 */
|
|
struct i2c_pads_info i2c_pad_info_loc = {
|
|
.scl = {
|
|
.i2c_mode = MX6_PAD_EIM_EB2__I2C2_SCL | PC,
|
|
.gpio_mode = MX6_PAD_EIM_EB2__GPIO2_IO30 | PC,
|
|
.gp = IMX_GPIO_NR(2, 30)
|
|
},
|
|
.sda = {
|
|
.i2c_mode = MX6_PAD_EIM_D16__I2C2_SDA | PC,
|
|
.gpio_mode = MX6_PAD_EIM_D16__GPIO3_IO16 | PC,
|
|
.gp = IMX_GPIO_NR(3, 16)
|
|
}
|
|
};
|
|
|
|
/* Apalis MMC */
|
|
iomux_v3_cfg_t const usdhc1_pads[] = {
|
|
MX6_PAD_SD1_CLK__SD1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
|
MX6_PAD_SD1_CMD__SD1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
|
MX6_PAD_SD1_DAT0__SD1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
|
MX6_PAD_SD1_DAT1__SD1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
|
MX6_PAD_SD1_DAT2__SD1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
|
MX6_PAD_SD1_DAT3__SD1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
|
MX6_PAD_NANDF_D5__GPIO2_IO05 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
|
|
# define GPIO_MMC_CD IMX_GPIO_NR(2, 5)
|
|
};
|
|
|
|
/* eMMC */
|
|
iomux_v3_cfg_t const usdhc3_pads[] = {
|
|
MX6_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
|
MX6_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
|
MX6_PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
|
MX6_PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
|
MX6_PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
|
MX6_PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
|
MX6_PAD_SD3_DAT4__SD3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
|
MX6_PAD_SD3_DAT5__SD3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
|
MX6_PAD_SD3_DAT6__SD3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
|
MX6_PAD_SD3_DAT7__SD3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
|
MX6_PAD_SD3_RST__SD3_RESET | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
|
};
|
|
|
|
iomux_v3_cfg_t const enet_pads[] = {
|
|
MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
|
MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
|
MX6_PAD_ENET_RXD0__ENET_RX_DATA0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
|
MX6_PAD_ENET_RXD1__ENET_RX_DATA1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
|
MX6_PAD_ENET_RX_ER__ENET_RX_ER | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
|
MX6_PAD_ENET_TX_EN__ENET_TX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
|
MX6_PAD_ENET_TXD0__ENET_TX_DATA0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
|
MX6_PAD_ENET_TXD1__ENET_TX_DATA1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
|
MX6_PAD_ENET_CRS_DV__ENET_RX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
|
MX6_PAD_GPIO_16__ENET_REF_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
|
};
|
|
|
|
static void setup_iomux_enet(void)
|
|
{
|
|
imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads));
|
|
}
|
|
|
|
/* mux auxiliary pins to GPIO, so they can be used from the U-Boot cmdline */
|
|
iomux_v3_cfg_t const gpio_pads[] = {
|
|
/* ADDRESS[17:18] [25] used as GPIO */
|
|
MX6_PAD_KEY_ROW2__GPIO4_IO11 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_KEY_COL2__GPIO4_IO10 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_NANDF_D1__GPIO2_IO01 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
/* ADDRESS[19:24] used as GPIO */
|
|
MX6_PAD_DISP0_DAT23__GPIO5_IO17 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_DISP0_DAT22__GPIO5_IO16 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_DISP0_DAT21__GPIO5_IO15 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_DISP0_DAT20__GPIO5_IO14 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_DISP0_DAT19__GPIO5_IO13 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_DISP0_DAT18__GPIO5_IO12 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
/* DATA[16:29] [31] used as GPIO */
|
|
MX6_PAD_EIM_LBA__GPIO2_IO27 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_EIM_BCLK__GPIO6_IO31 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_NANDF_CS3__GPIO6_IO16 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_NANDF_CS1__GPIO6_IO14 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_NANDF_RB0__GPIO6_IO10 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_NANDF_ALE__GPIO6_IO08 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_NANDF_WP_B__GPIO6_IO09 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_NANDF_CS0__GPIO6_IO11 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_NANDF_CLE__GPIO6_IO07 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_GPIO_19__GPIO4_IO05 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_CSI0_MCLK__GPIO5_IO19 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_CSI0_PIXCLK__GPIO5_IO18 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_GPIO_4__GPIO1_IO04 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_GPIO_5__GPIO1_IO05 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_GPIO_2__GPIO1_IO02 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
/* DQM[0:3] used as GPIO */
|
|
MX6_PAD_EIM_EB0__GPIO2_IO28 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_EIM_EB1__GPIO2_IO29 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_SD2_DAT2__GPIO1_IO13 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_NANDF_D0__GPIO2_IO00 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
/* RDY used as GPIO */
|
|
MX6_PAD_EIM_WAIT__GPIO5_IO00 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
/* ADDRESS[16] DATA[30] used as GPIO */
|
|
MX6_PAD_KEY_ROW4__GPIO4_IO15 | MUX_PAD_CTRL(WEAK_PULLDOWN),
|
|
MX6_PAD_KEY_COL4__GPIO4_IO14 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
/* CSI pins used as GPIO */
|
|
MX6_PAD_EIM_A24__GPIO5_IO04 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_SD2_CMD__GPIO1_IO11 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_NANDF_CS2__GPIO6_IO15 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_EIM_D18__GPIO3_IO18 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_EIM_A19__GPIO2_IO19 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_EIM_D29__GPIO3_IO29 | MUX_PAD_CTRL(WEAK_PULLDOWN),
|
|
MX6_PAD_EIM_A23__GPIO6_IO06 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_EIM_A20__GPIO2_IO18 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_EIM_A17__GPIO2_IO21 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_EIM_A18__GPIO2_IO20 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_EIM_EB3__GPIO2_IO31 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_EIM_D17__GPIO3_IO17 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_SD2_DAT0__GPIO1_IO15 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
/* GPIO */
|
|
MX6_PAD_EIM_D26__GPIO3_IO26 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_EIM_D27__GPIO3_IO27 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_NANDF_D6__GPIO2_IO06 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_NANDF_D3__GPIO2_IO03 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_ENET_REF_CLK__GPIO1_IO23 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_DI0_PIN4__GPIO4_IO20 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_SD4_DAT3__GPIO2_IO11 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_NANDF_D4__GPIO2_IO04 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_SD4_DAT0__GPIO2_IO08 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_GPIO_7__GPIO1_IO07 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
MX6_PAD_GPIO_8__GPIO1_IO08 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
/* USBH_OC */
|
|
MX6_PAD_EIM_D30__GPIO3_IO30 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
/* USBC_ID */
|
|
MX6_PAD_NANDF_D2__GPIO2_IO02 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
/* USBC_DET */
|
|
MX6_PAD_GPIO_17__GPIO7_IO12 | MUX_PAD_CTRL(WEAK_PULLUP),
|
|
};
|
|
|
|
static void setup_iomux_gpio(void)
|
|
{
|
|
imx_iomux_v3_setup_multiple_pads(gpio_pads, ARRAY_SIZE(gpio_pads));
|
|
}
|
|
|
|
iomux_v3_cfg_t const usb_pads[] = {
|
|
/* USB_PE */
|
|
MX6_PAD_EIM_D31__GPIO3_IO31 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
# define GPIO_USBH_EN IMX_GPIO_NR(3, 31)
|
|
};
|
|
|
|
/*
|
|
* UARTs are used in DTE mode, switch the mode on all UARTs before
|
|
* any pinmuxing connects a (DCE) output to a transceiver output.
|
|
*/
|
|
#define UFCR 0x90 /* FIFO Control Register */
|
|
#define UFCR_DCEDTE (1<<6) /* DCE=0 */
|
|
|
|
static void setup_dtemode_uart(void)
|
|
{
|
|
setbits_le32((u32 *)(UART1_BASE + UFCR), UFCR_DCEDTE);
|
|
setbits_le32((u32 *)(UART2_BASE + UFCR), UFCR_DCEDTE);
|
|
setbits_le32((u32 *)(UART3_BASE + UFCR), UFCR_DCEDTE);
|
|
}
|
|
|
|
static void setup_iomux_uart(void)
|
|
{
|
|
setup_dtemode_uart();
|
|
imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
|
|
}
|
|
|
|
#ifdef CONFIG_USB_EHCI_MX6
|
|
int board_ehci_hcd_init(int port)
|
|
{
|
|
imx_iomux_v3_setup_multiple_pads(usb_pads, ARRAY_SIZE(usb_pads));
|
|
return 0;
|
|
}
|
|
|
|
int board_ehci_power(int port, int on)
|
|
{
|
|
switch (port) {
|
|
case 0:
|
|
/* control OTG power */
|
|
/* No special PE for USBC, always on when ID pin signals
|
|
host mode */
|
|
break;
|
|
case 1:
|
|
/* Control MXM USBH */
|
|
/* Set MXM USBH power enable, '0' means on */
|
|
gpio_direction_output(GPIO_USBH_EN, !on);
|
|
mdelay(100);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_FSL_ESDHC
|
|
/* use the following sequence: eMMC, MMC */
|
|
struct fsl_esdhc_cfg usdhc_cfg[CONFIG_SYS_FSL_USDHC_NUM] = {
|
|
{USDHC3_BASE_ADDR},
|
|
{USDHC1_BASE_ADDR},
|
|
};
|
|
|
|
int board_mmc_getcd(struct mmc *mmc)
|
|
{
|
|
struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
|
|
int ret = true; /* default: assume inserted */
|
|
|
|
switch (cfg->esdhc_base) {
|
|
case USDHC1_BASE_ADDR:
|
|
gpio_direction_input(GPIO_MMC_CD);
|
|
ret = !gpio_get_value(GPIO_MMC_CD);
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
int board_mmc_init(bd_t *bis)
|
|
{
|
|
#ifndef CONFIG_SPL_BUILD
|
|
s32 status = 0;
|
|
u32 index = 0;
|
|
|
|
usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
|
|
usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
|
|
|
|
usdhc_cfg[0].max_bus_width = 8;
|
|
usdhc_cfg[1].max_bus_width = 4;
|
|
|
|
for (index = 0; index < CONFIG_SYS_FSL_USDHC_NUM; ++index) {
|
|
switch (index) {
|
|
case 0:
|
|
imx_iomux_v3_setup_multiple_pads(
|
|
usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
|
|
break;
|
|
case 1:
|
|
imx_iomux_v3_setup_multiple_pads(
|
|
usdhc1_pads, ARRAY_SIZE(usdhc1_pads));
|
|
break;
|
|
default:
|
|
printf("Warning: you configured more USDHC controllers (%d) then supported by the board (%d)\n",
|
|
index + 1, CONFIG_SYS_FSL_USDHC_NUM);
|
|
return status;
|
|
}
|
|
|
|
status |= fsl_esdhc_initialize(bis, &usdhc_cfg[index]);
|
|
}
|
|
|
|
return status;
|
|
#else
|
|
struct src *psrc = (struct src *)SRC_BASE_ADDR;
|
|
unsigned reg = readl(&psrc->sbmr1) >> 11;
|
|
/*
|
|
* Upon reading BOOT_CFG register the following map is done:
|
|
* Bit 11 and 12 of BOOT_CFG register can determine the current
|
|
* mmc port
|
|
* 0x1 SD1
|
|
* 0x2 SD2
|
|
* 0x3 SD4
|
|
*/
|
|
|
|
switch (reg & 0x3) {
|
|
case 0x0:
|
|
imx_iomux_v3_setup_multiple_pads(
|
|
usdhc1_pads, ARRAY_SIZE(usdhc1_pads));
|
|
usdhc_cfg[0].esdhc_base = USDHC1_BASE_ADDR;
|
|
usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
|
|
gd->arch.sdhc_clk = usdhc_cfg[0].sdhc_clk;
|
|
break;
|
|
case 0x2:
|
|
imx_iomux_v3_setup_multiple_pads(
|
|
usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
|
|
usdhc_cfg[0].esdhc_base = USDHC3_BASE_ADDR;
|
|
usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
|
|
gd->arch.sdhc_clk = usdhc_cfg[0].sdhc_clk;
|
|
break;
|
|
default:
|
|
puts("MMC boot device not available");
|
|
}
|
|
|
|
return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
|
|
#endif
|
|
}
|
|
#endif
|
|
|
|
int board_phy_config(struct phy_device *phydev)
|
|
{
|
|
if (phydev->drv->config)
|
|
phydev->drv->config(phydev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_eth_init(bd_t *bis)
|
|
{
|
|
struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
|
|
uint32_t base = IMX_FEC_BASE;
|
|
struct mii_dev *bus = NULL;
|
|
struct phy_device *phydev = NULL;
|
|
int ret;
|
|
|
|
/* provide the PHY clock from the i.MX 6 */
|
|
ret = enable_fec_anatop_clock(0, ENET_50MHZ);
|
|
if (ret)
|
|
return ret;
|
|
/* set gpr1[ENET_CLK_SEL] */
|
|
setbits_le32(&iomuxc_regs->gpr[1], IOMUXC_GPR1_ENET_CLK_SEL_MASK);
|
|
|
|
setup_iomux_enet();
|
|
|
|
#ifdef CONFIG_FEC_MXC
|
|
bus = fec_get_miibus(base, -1);
|
|
if (!bus)
|
|
return 0;
|
|
/* scan PHY 1..7 */
|
|
phydev = phy_find_by_mask(bus, 0xff, PHY_INTERFACE_MODE_RMII);
|
|
if (!phydev) {
|
|
free(bus);
|
|
puts("no PHY found\n");
|
|
return 0;
|
|
}
|
|
phy_reset(phydev);
|
|
printf("using PHY at %d\n", phydev->addr);
|
|
ret = fec_probe(bis, -1, base, bus, phydev);
|
|
if (ret) {
|
|
printf("FEC MXC: %s:failed\n", __func__);
|
|
free(phydev);
|
|
free(bus);
|
|
}
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
static iomux_v3_cfg_t const pwr_intb_pads[] = {
|
|
/*
|
|
* the bootrom sets the iomux to vselect, potentially connecting
|
|
* two outputs. Set this back to GPIO
|
|
*/
|
|
MX6_PAD_GPIO_18__GPIO7_IO13 | MUX_PAD_CTRL(NO_PAD_CTRL)
|
|
};
|
|
|
|
#if defined(CONFIG_VIDEO_IPUV3)
|
|
|
|
static iomux_v3_cfg_t const backlight_pads[] = {
|
|
/* Backlight On */
|
|
MX6_PAD_EIM_D26__GPIO3_IO26 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
#define RGB_BACKLIGHT_GP IMX_GPIO_NR(3, 26)
|
|
/* Backlight PWM, used as GPIO in U-Boot */
|
|
MX6_PAD_EIM_A22__GPIO2_IO16 | MUX_PAD_CTRL(NO_PULLUP),
|
|
MX6_PAD_SD4_DAT1__GPIO2_IO09 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
|
#define RGB_BACKLIGHTPWM_GP IMX_GPIO_NR(2, 9)
|
|
};
|
|
|
|
static iomux_v3_cfg_t const rgb_pads[] = {
|
|
MX6_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK | MUX_PAD_CTRL(OUTPUT_RGB),
|
|
MX6_PAD_DI0_PIN15__IPU1_DI0_PIN15 | MUX_PAD_CTRL(OUTPUT_RGB),
|
|
MX6_PAD_DI0_PIN2__IPU1_DI0_PIN02 | MUX_PAD_CTRL(OUTPUT_RGB),
|
|
MX6_PAD_DI0_PIN3__IPU1_DI0_PIN03 | MUX_PAD_CTRL(OUTPUT_RGB),
|
|
MX6_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 | MUX_PAD_CTRL(OUTPUT_RGB),
|
|
MX6_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 | MUX_PAD_CTRL(OUTPUT_RGB),
|
|
MX6_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 | MUX_PAD_CTRL(OUTPUT_RGB),
|
|
MX6_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 | MUX_PAD_CTRL(OUTPUT_RGB),
|
|
MX6_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 | MUX_PAD_CTRL(OUTPUT_RGB),
|
|
MX6_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 | MUX_PAD_CTRL(OUTPUT_RGB),
|
|
MX6_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 | MUX_PAD_CTRL(OUTPUT_RGB),
|
|
MX6_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 | MUX_PAD_CTRL(OUTPUT_RGB),
|
|
MX6_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 | MUX_PAD_CTRL(OUTPUT_RGB),
|
|
MX6_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 | MUX_PAD_CTRL(OUTPUT_RGB),
|
|
MX6_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 | MUX_PAD_CTRL(OUTPUT_RGB),
|
|
MX6_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 | MUX_PAD_CTRL(OUTPUT_RGB),
|
|
MX6_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 | MUX_PAD_CTRL(OUTPUT_RGB),
|
|
MX6_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 | MUX_PAD_CTRL(OUTPUT_RGB),
|
|
MX6_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 | MUX_PAD_CTRL(OUTPUT_RGB),
|
|
MX6_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 | MUX_PAD_CTRL(OUTPUT_RGB),
|
|
MX6_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 | MUX_PAD_CTRL(OUTPUT_RGB),
|
|
MX6_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 | MUX_PAD_CTRL(OUTPUT_RGB),
|
|
};
|
|
|
|
static void do_enable_hdmi(struct display_info_t const *dev)
|
|
{
|
|
imx_enable_hdmi_phy();
|
|
}
|
|
|
|
static void enable_rgb(struct display_info_t const *dev)
|
|
{
|
|
imx_iomux_v3_setup_multiple_pads(
|
|
rgb_pads,
|
|
ARRAY_SIZE(rgb_pads));
|
|
gpio_direction_output(RGB_BACKLIGHT_GP, 1);
|
|
gpio_direction_output(RGB_BACKLIGHTPWM_GP, 0);
|
|
}
|
|
|
|
static int detect_default(struct display_info_t const *dev)
|
|
{
|
|
(void) dev;
|
|
return 1;
|
|
}
|
|
|
|
struct display_info_t const displays[] = {{
|
|
.bus = -1,
|
|
.addr = 0,
|
|
.pixfmt = IPU_PIX_FMT_RGB24,
|
|
.detect = detect_hdmi,
|
|
.enable = do_enable_hdmi,
|
|
.mode = {
|
|
.name = "HDMI",
|
|
.refresh = 60,
|
|
.xres = 1024,
|
|
.yres = 768,
|
|
.pixclock = 15385,
|
|
.left_margin = 220,
|
|
.right_margin = 40,
|
|
.upper_margin = 21,
|
|
.lower_margin = 7,
|
|
.hsync_len = 60,
|
|
.vsync_len = 10,
|
|
.sync = FB_SYNC_EXT,
|
|
.vmode = FB_VMODE_NONINTERLACED
|
|
} }, {
|
|
.bus = -1,
|
|
.addr = 0,
|
|
.pixfmt = IPU_PIX_FMT_RGB666,
|
|
.detect = detect_default,
|
|
.enable = enable_rgb,
|
|
.mode = {
|
|
.name = "vga-rgb",
|
|
.refresh = 60,
|
|
.xres = 640,
|
|
.yres = 480,
|
|
.pixclock = 33000,
|
|
.left_margin = 48,
|
|
.right_margin = 16,
|
|
.upper_margin = 31,
|
|
.lower_margin = 11,
|
|
.hsync_len = 96,
|
|
.vsync_len = 2,
|
|
.sync = 0,
|
|
.vmode = FB_VMODE_NONINTERLACED
|
|
} }, {
|
|
.bus = -1,
|
|
.addr = 0,
|
|
.pixfmt = IPU_PIX_FMT_RGB666,
|
|
.enable = enable_rgb,
|
|
.mode = {
|
|
.name = "wvga-rgb",
|
|
.refresh = 60,
|
|
.xres = 800,
|
|
.yres = 480,
|
|
.pixclock = 25000,
|
|
.left_margin = 40,
|
|
.right_margin = 88,
|
|
.upper_margin = 33,
|
|
.lower_margin = 10,
|
|
.hsync_len = 128,
|
|
.vsync_len = 2,
|
|
.sync = 0,
|
|
.vmode = FB_VMODE_NONINTERLACED
|
|
} } };
|
|
size_t display_count = ARRAY_SIZE(displays);
|
|
|
|
static void setup_display(void)
|
|
{
|
|
struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
|
|
struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
|
|
int reg;
|
|
|
|
enable_ipu_clock();
|
|
imx_setup_hdmi();
|
|
/* Turn on LDB0,IPU,IPU DI0 clocks */
|
|
reg = __raw_readl(&mxc_ccm->CCGR3);
|
|
reg |= MXC_CCM_CCGR3_LDB_DI0_MASK;
|
|
writel(reg, &mxc_ccm->CCGR3);
|
|
|
|
/* set LDB0, LDB1 clk select to 011/011 */
|
|
reg = readl(&mxc_ccm->cs2cdr);
|
|
reg &= ~(MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK
|
|
|MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK);
|
|
reg |= (3<<MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET)
|
|
|(3<<MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET);
|
|
writel(reg, &mxc_ccm->cs2cdr);
|
|
|
|
reg = readl(&mxc_ccm->cscmr2);
|
|
reg |= MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV;
|
|
writel(reg, &mxc_ccm->cscmr2);
|
|
|
|
reg = readl(&mxc_ccm->chsccdr);
|
|
reg |= (CHSCCDR_CLK_SEL_LDB_DI0
|
|
<<MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET);
|
|
writel(reg, &mxc_ccm->chsccdr);
|
|
|
|
reg = IOMUXC_GPR2_BGREF_RRMODE_EXTERNAL_RES
|
|
|IOMUXC_GPR2_DI1_VS_POLARITY_ACTIVE_HIGH
|
|
|IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_LOW
|
|
|IOMUXC_GPR2_BIT_MAPPING_CH1_SPWG
|
|
|IOMUXC_GPR2_DATA_WIDTH_CH1_18BIT
|
|
|IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG
|
|
|IOMUXC_GPR2_DATA_WIDTH_CH0_18BIT
|
|
|IOMUXC_GPR2_LVDS_CH1_MODE_DISABLED
|
|
|IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI0;
|
|
writel(reg, &iomux->gpr[2]);
|
|
|
|
reg = readl(&iomux->gpr[3]);
|
|
reg = (reg & ~(IOMUXC_GPR3_LVDS0_MUX_CTL_MASK
|
|
|IOMUXC_GPR3_HDMI_MUX_CTL_MASK))
|
|
| (IOMUXC_GPR3_MUX_SRC_IPU1_DI0
|
|
<<IOMUXC_GPR3_LVDS0_MUX_CTL_OFFSET);
|
|
writel(reg, &iomux->gpr[3]);
|
|
|
|
/* backlight unconditionally on for now */
|
|
imx_iomux_v3_setup_multiple_pads(backlight_pads,
|
|
ARRAY_SIZE(backlight_pads));
|
|
/* use 0 for EDT 7", use 1 for LG fullHD panel */
|
|
gpio_direction_output(RGB_BACKLIGHTPWM_GP, 0);
|
|
gpio_direction_output(RGB_BACKLIGHT_GP, 1);
|
|
}
|
|
#endif /* defined(CONFIG_VIDEO_IPUV3) */
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
imx_iomux_v3_setup_multiple_pads(pwr_intb_pads,
|
|
ARRAY_SIZE(pwr_intb_pads));
|
|
setup_iomux_uart();
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Do not overwrite the console
|
|
* Use always serial for U-Boot console
|
|
*/
|
|
int overwrite_console(void)
|
|
{
|
|
return 1;
|
|
}
|
|
|
|
int board_init(void)
|
|
{
|
|
/* address of boot parameters */
|
|
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
|
|
|
|
setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
|
|
setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info_loc);
|
|
|
|
#if defined(CONFIG_VIDEO_IPUV3)
|
|
setup_display();
|
|
#endif
|
|
|
|
#ifdef CONFIG_TDX_CMD_IMX_MFGR
|
|
(void) pmic_init();
|
|
#endif
|
|
|
|
#ifdef CONFIG_SATA
|
|
setup_sata();
|
|
#endif
|
|
|
|
setup_iomux_gpio();
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_BOARD_LATE_INIT
|
|
int board_late_init(void)
|
|
{
|
|
#if defined(CONFIG_REVISION_TAG) && \
|
|
defined(CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG)
|
|
char env_str[256];
|
|
u32 rev;
|
|
|
|
rev = get_board_rev();
|
|
snprintf(env_str, ARRAY_SIZE(env_str), "%.4x", rev);
|
|
env_set("board_rev", env_str);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_BOARD_LATE_INIT */
|
|
|
|
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_SYSTEM_SETUP)
|
|
int ft_system_setup(void *blob, bd_t *bd)
|
|
{
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
int checkboard(void)
|
|
{
|
|
char it[] = " IT";
|
|
int minc, maxc;
|
|
|
|
switch (get_cpu_temp_grade(&minc, &maxc)) {
|
|
case TEMP_AUTOMOTIVE:
|
|
case TEMP_INDUSTRIAL:
|
|
break;
|
|
case TEMP_EXTCOMMERCIAL:
|
|
default:
|
|
it[0] = 0;
|
|
};
|
|
printf("Model: Toradex Colibri iMX6 %s %sMB%s\n",
|
|
is_cpu_type(MXC_CPU_MX6DL) ? "DualLite" : "Solo",
|
|
(gd->ram_size == 0x20000000) ? "512" : "256", it);
|
|
return 0;
|
|
}
|
|
|
|
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
|
|
int ft_board_setup(void *blob, bd_t *bd)
|
|
{
|
|
return ft_common_board_setup(blob, bd);
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_CMD_BMODE
|
|
static const struct boot_mode board_boot_modes[] = {
|
|
{"mmc", MAKE_CFGVAL(0x40, 0x20, 0x00, 0x00)},
|
|
{NULL, 0},
|
|
};
|
|
#endif
|
|
|
|
int misc_init_r(void)
|
|
{
|
|
#ifdef CONFIG_CMD_BMODE
|
|
add_board_boot_modes(board_boot_modes);
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_LDO_BYPASS_CHECK
|
|
/* TODO, use external pmic, for now always ldo_enable */
|
|
void ldo_mode_set(int ldo_bypass)
|
|
{
|
|
return;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_SPL_BUILD
|
|
#include <spl.h>
|
|
#include <linux/libfdt.h>
|
|
#include "asm/arch/mx6dl-ddr.h"
|
|
#include "asm/arch/iomux.h"
|
|
#include "asm/arch/crm_regs.h"
|
|
|
|
static int mx6s_dcd_table[] = {
|
|
/* ddr-setup.cfg */
|
|
|
|
MX6_IOM_DRAM_SDQS0, 0x00000030,
|
|
MX6_IOM_DRAM_SDQS1, 0x00000030,
|
|
MX6_IOM_DRAM_SDQS2, 0x00000030,
|
|
MX6_IOM_DRAM_SDQS3, 0x00000030,
|
|
MX6_IOM_DRAM_SDQS4, 0x00000030,
|
|
MX6_IOM_DRAM_SDQS5, 0x00000030,
|
|
MX6_IOM_DRAM_SDQS6, 0x00000030,
|
|
MX6_IOM_DRAM_SDQS7, 0x00000030,
|
|
|
|
MX6_IOM_GRP_B0DS, 0x00000030,
|
|
MX6_IOM_GRP_B1DS, 0x00000030,
|
|
MX6_IOM_GRP_B2DS, 0x00000030,
|
|
MX6_IOM_GRP_B3DS, 0x00000030,
|
|
MX6_IOM_GRP_B4DS, 0x00000030,
|
|
MX6_IOM_GRP_B5DS, 0x00000030,
|
|
MX6_IOM_GRP_B6DS, 0x00000030,
|
|
MX6_IOM_GRP_B7DS, 0x00000030,
|
|
MX6_IOM_GRP_ADDDS, 0x00000030,
|
|
/* 40 Ohm drive strength for cs0/1,sdba2,cke0/1,sdwe */
|
|
MX6_IOM_GRP_CTLDS, 0x00000030,
|
|
|
|
MX6_IOM_DRAM_DQM0, 0x00020030,
|
|
MX6_IOM_DRAM_DQM1, 0x00020030,
|
|
MX6_IOM_DRAM_DQM2, 0x00020030,
|
|
MX6_IOM_DRAM_DQM3, 0x00020030,
|
|
MX6_IOM_DRAM_DQM4, 0x00020030,
|
|
MX6_IOM_DRAM_DQM5, 0x00020030,
|
|
MX6_IOM_DRAM_DQM6, 0x00020030,
|
|
MX6_IOM_DRAM_DQM7, 0x00020030,
|
|
|
|
MX6_IOM_DRAM_CAS, 0x00020030,
|
|
MX6_IOM_DRAM_RAS, 0x00020030,
|
|
MX6_IOM_DRAM_SDCLK_0, 0x00020030,
|
|
MX6_IOM_DRAM_SDCLK_1, 0x00020030,
|
|
|
|
MX6_IOM_DRAM_RESET, 0x00020030,
|
|
MX6_IOM_DRAM_SDCKE0, 0x00003000,
|
|
MX6_IOM_DRAM_SDCKE1, 0x00003000,
|
|
|
|
MX6_IOM_DRAM_SDODT0, 0x00003030,
|
|
MX6_IOM_DRAM_SDODT1, 0x00003030,
|
|
|
|
/* (differential input) */
|
|
MX6_IOM_DDRMODE_CTL, 0x00020000,
|
|
/* (differential input) */
|
|
MX6_IOM_GRP_DDRMODE, 0x00020000,
|
|
/* disable ddr pullups */
|
|
MX6_IOM_GRP_DDRPKE, 0x00000000,
|
|
MX6_IOM_DRAM_SDBA2, 0x00000000,
|
|
/* 40 Ohm drive strength for cs0/1,sdba2,cke0/1,sdwe */
|
|
MX6_IOM_GRP_DDR_TYPE, 0x000C0000,
|
|
|
|
/* Read data DQ Byte0-3 delay */
|
|
MX6_MMDC_P0_MPRDDQBY0DL, 0x33333333,
|
|
MX6_MMDC_P0_MPRDDQBY1DL, 0x33333333,
|
|
MX6_MMDC_P0_MPRDDQBY2DL, 0x33333333,
|
|
MX6_MMDC_P0_MPRDDQBY3DL, 0x33333333,
|
|
MX6_MMDC_P1_MPRDDQBY0DL, 0x33333333,
|
|
MX6_MMDC_P1_MPRDDQBY1DL, 0x33333333,
|
|
MX6_MMDC_P1_MPRDDQBY2DL, 0x33333333,
|
|
MX6_MMDC_P1_MPRDDQBY3DL, 0x33333333,
|
|
|
|
/*
|
|
* MDMISC mirroring interleaved (row/bank/col)
|
|
*/
|
|
/* TODO: check what the RALAT field does */
|
|
MX6_MMDC_P0_MDMISC, 0x00081740,
|
|
|
|
/*
|
|
* MDSCR con_req
|
|
*/
|
|
MX6_MMDC_P0_MDSCR, 0x00008000,
|
|
|
|
|
|
/* 800mhz_2x64mx16.cfg */
|
|
|
|
MX6_MMDC_P0_MDPDC, 0x0002002D,
|
|
MX6_MMDC_P0_MDCFG0, 0x2C305503,
|
|
MX6_MMDC_P0_MDCFG1, 0xB66D8D63,
|
|
MX6_MMDC_P0_MDCFG2, 0x01FF00DB,
|
|
MX6_MMDC_P0_MDRWD, 0x000026D2,
|
|
MX6_MMDC_P0_MDOR, 0x00301023,
|
|
MX6_MMDC_P0_MDOTC, 0x00333030,
|
|
MX6_MMDC_P0_MDPDC, 0x0002556D,
|
|
/* CS0 End: 7MSB of ((0x10000000, + 512M) -1) >> 25 */
|
|
MX6_MMDC_P0_MDASP, 0x00000017,
|
|
/* DDR3 DATA BUS SIZE: 64BIT */
|
|
/* MX6_MMDC_P0_MDCTL, 0x821A0000, */
|
|
/* DDR3 DATA BUS SIZE: 32BIT */
|
|
MX6_MMDC_P0_MDCTL, 0x82190000,
|
|
|
|
/* Write commands to DDR */
|
|
/* Load Mode Registers */
|
|
/* TODO Use Auto Self-Refresh mode (Extended Temperature)*/
|
|
/* MX6_MMDC_P0_MDSCR, 0x04408032, */
|
|
MX6_MMDC_P0_MDSCR, 0x04008032,
|
|
MX6_MMDC_P0_MDSCR, 0x00008033,
|
|
MX6_MMDC_P0_MDSCR, 0x00048031,
|
|
MX6_MMDC_P0_MDSCR, 0x13208030,
|
|
/* ZQ calibration */
|
|
MX6_MMDC_P0_MDSCR, 0x04008040,
|
|
|
|
MX6_MMDC_P0_MPZQHWCTRL, 0xA1390003,
|
|
MX6_MMDC_P1_MPZQHWCTRL, 0xA1390003,
|
|
MX6_MMDC_P0_MDREF, 0x00005800,
|
|
|
|
MX6_MMDC_P0_MPODTCTRL, 0x00000000,
|
|
MX6_MMDC_P1_MPODTCTRL, 0x00000000,
|
|
|
|
MX6_MMDC_P0_MPDGCTRL0, 0x42360232,
|
|
MX6_MMDC_P0_MPDGCTRL1, 0x021F022A,
|
|
MX6_MMDC_P1_MPDGCTRL0, 0x421E0224,
|
|
MX6_MMDC_P1_MPDGCTRL1, 0x02110218,
|
|
|
|
MX6_MMDC_P0_MPRDDLCTL, 0x41434344,
|
|
MX6_MMDC_P1_MPRDDLCTL, 0x4345423E,
|
|
MX6_MMDC_P0_MPWRDLCTL, 0x39383339,
|
|
MX6_MMDC_P1_MPWRDLCTL, 0x3E363930,
|
|
|
|
MX6_MMDC_P0_MPWLDECTRL0, 0x00340039,
|
|
MX6_MMDC_P0_MPWLDECTRL1, 0x002C002D,
|
|
MX6_MMDC_P1_MPWLDECTRL0, 0x00120019,
|
|
MX6_MMDC_P1_MPWLDECTRL1, 0x0012002D,
|
|
|
|
MX6_MMDC_P0_MPMUR0, 0x00000800,
|
|
MX6_MMDC_P1_MPMUR0, 0x00000800,
|
|
MX6_MMDC_P0_MDSCR, 0x00000000,
|
|
MX6_MMDC_P0_MAPSR, 0x00011006,
|
|
};
|
|
|
|
static int mx6dl_dcd_table[] = {
|
|
/* ddr-setup.cfg */
|
|
|
|
MX6_IOM_DRAM_SDQS0, 0x00000030,
|
|
MX6_IOM_DRAM_SDQS1, 0x00000030,
|
|
MX6_IOM_DRAM_SDQS2, 0x00000030,
|
|
MX6_IOM_DRAM_SDQS3, 0x00000030,
|
|
MX6_IOM_DRAM_SDQS4, 0x00000030,
|
|
MX6_IOM_DRAM_SDQS5, 0x00000030,
|
|
MX6_IOM_DRAM_SDQS6, 0x00000030,
|
|
MX6_IOM_DRAM_SDQS7, 0x00000030,
|
|
|
|
MX6_IOM_GRP_B0DS, 0x00000030,
|
|
MX6_IOM_GRP_B1DS, 0x00000030,
|
|
MX6_IOM_GRP_B2DS, 0x00000030,
|
|
MX6_IOM_GRP_B3DS, 0x00000030,
|
|
MX6_IOM_GRP_B4DS, 0x00000030,
|
|
MX6_IOM_GRP_B5DS, 0x00000030,
|
|
MX6_IOM_GRP_B6DS, 0x00000030,
|
|
MX6_IOM_GRP_B7DS, 0x00000030,
|
|
MX6_IOM_GRP_ADDDS, 0x00000030,
|
|
/* 40 Ohm drive strength for cs0/1,sdba2,cke0/1,sdwe */
|
|
MX6_IOM_GRP_CTLDS, 0x00000030,
|
|
|
|
MX6_IOM_DRAM_DQM0, 0x00020030,
|
|
MX6_IOM_DRAM_DQM1, 0x00020030,
|
|
MX6_IOM_DRAM_DQM2, 0x00020030,
|
|
MX6_IOM_DRAM_DQM3, 0x00020030,
|
|
MX6_IOM_DRAM_DQM4, 0x00020030,
|
|
MX6_IOM_DRAM_DQM5, 0x00020030,
|
|
MX6_IOM_DRAM_DQM6, 0x00020030,
|
|
MX6_IOM_DRAM_DQM7, 0x00020030,
|
|
|
|
MX6_IOM_DRAM_CAS, 0x00020030,
|
|
MX6_IOM_DRAM_RAS, 0x00020030,
|
|
MX6_IOM_DRAM_SDCLK_0, 0x00020030,
|
|
MX6_IOM_DRAM_SDCLK_1, 0x00020030,
|
|
|
|
MX6_IOM_DRAM_RESET, 0x00020030,
|
|
MX6_IOM_DRAM_SDCKE0, 0x00003000,
|
|
MX6_IOM_DRAM_SDCKE1, 0x00003000,
|
|
|
|
MX6_IOM_DRAM_SDODT0, 0x00003030,
|
|
MX6_IOM_DRAM_SDODT1, 0x00003030,
|
|
|
|
/* (differential input) */
|
|
MX6_IOM_DDRMODE_CTL, 0x00020000,
|
|
/* (differential input) */
|
|
MX6_IOM_GRP_DDRMODE, 0x00020000,
|
|
/* disable ddr pullups */
|
|
MX6_IOM_GRP_DDRPKE, 0x00000000,
|
|
MX6_IOM_DRAM_SDBA2, 0x00000000,
|
|
/* 40 Ohm drive strength for cs0/1,sdba2,cke0/1,sdwe */
|
|
MX6_IOM_GRP_DDR_TYPE, 0x000C0000,
|
|
|
|
/* Read data DQ Byte0-3 delay */
|
|
MX6_MMDC_P0_MPRDDQBY0DL, 0x33333333,
|
|
MX6_MMDC_P0_MPRDDQBY1DL, 0x33333333,
|
|
MX6_MMDC_P0_MPRDDQBY2DL, 0x33333333,
|
|
MX6_MMDC_P0_MPRDDQBY3DL, 0x33333333,
|
|
MX6_MMDC_P1_MPRDDQBY0DL, 0x33333333,
|
|
MX6_MMDC_P1_MPRDDQBY1DL, 0x33333333,
|
|
MX6_MMDC_P1_MPRDDQBY2DL, 0x33333333,
|
|
MX6_MMDC_P1_MPRDDQBY3DL, 0x33333333,
|
|
|
|
/*
|
|
* MDMISC mirroring interleaved (row/bank/col)
|
|
*/
|
|
/* TODO: check what the RALAT field does */
|
|
MX6_MMDC_P0_MDMISC, 0x00081740,
|
|
|
|
/*
|
|
* MDSCR con_req
|
|
*/
|
|
MX6_MMDC_P0_MDSCR, 0x00008000,
|
|
|
|
|
|
/* 800mhz_2x64mx16.cfg */
|
|
|
|
MX6_MMDC_P0_MDPDC, 0x0002002D,
|
|
MX6_MMDC_P0_MDCFG0, 0x2C305503,
|
|
MX6_MMDC_P0_MDCFG1, 0xB66D8D63,
|
|
MX6_MMDC_P0_MDCFG2, 0x01FF00DB,
|
|
MX6_MMDC_P0_MDRWD, 0x000026D2,
|
|
MX6_MMDC_P0_MDOR, 0x00301023,
|
|
MX6_MMDC_P0_MDOTC, 0x00333030,
|
|
MX6_MMDC_P0_MDPDC, 0x0002556D,
|
|
/* CS0 End: 7MSB of ((0x10000000, + 512M) -1) >> 25 */
|
|
MX6_MMDC_P0_MDASP, 0x00000017,
|
|
/* DDR3 DATA BUS SIZE: 64BIT */
|
|
MX6_MMDC_P0_MDCTL, 0x821A0000,
|
|
/* DDR3 DATA BUS SIZE: 32BIT */
|
|
/* MX6_MMDC_P0_MDCTL, 0x82190000, */
|
|
|
|
/* Write commands to DDR */
|
|
/* Load Mode Registers */
|
|
/* TODO Use Auto Self-Refresh mode (Extended Temperature)*/
|
|
/* MX6_MMDC_P0_MDSCR, 0x04408032, */
|
|
MX6_MMDC_P0_MDSCR, 0x04008032,
|
|
MX6_MMDC_P0_MDSCR, 0x00008033,
|
|
MX6_MMDC_P0_MDSCR, 0x00048031,
|
|
MX6_MMDC_P0_MDSCR, 0x13208030,
|
|
/* ZQ calibration */
|
|
MX6_MMDC_P0_MDSCR, 0x04008040,
|
|
|
|
MX6_MMDC_P0_MPZQHWCTRL, 0xA1390003,
|
|
MX6_MMDC_P1_MPZQHWCTRL, 0xA1390003,
|
|
MX6_MMDC_P0_MDREF, 0x00005800,
|
|
|
|
MX6_MMDC_P0_MPODTCTRL, 0x00000000,
|
|
MX6_MMDC_P1_MPODTCTRL, 0x00000000,
|
|
|
|
MX6_MMDC_P0_MPDGCTRL0, 0x42360232,
|
|
MX6_MMDC_P0_MPDGCTRL1, 0x021F022A,
|
|
MX6_MMDC_P1_MPDGCTRL0, 0x421E0224,
|
|
MX6_MMDC_P1_MPDGCTRL1, 0x02110218,
|
|
|
|
MX6_MMDC_P0_MPRDDLCTL, 0x41434344,
|
|
MX6_MMDC_P1_MPRDDLCTL, 0x4345423E,
|
|
MX6_MMDC_P0_MPWRDLCTL, 0x39383339,
|
|
MX6_MMDC_P1_MPWRDLCTL, 0x3E363930,
|
|
|
|
MX6_MMDC_P0_MPWLDECTRL0, 0x00340039,
|
|
MX6_MMDC_P0_MPWLDECTRL1, 0x002C002D,
|
|
MX6_MMDC_P1_MPWLDECTRL0, 0x00120019,
|
|
MX6_MMDC_P1_MPWLDECTRL1, 0x0012002D,
|
|
|
|
MX6_MMDC_P0_MPMUR0, 0x00000800,
|
|
MX6_MMDC_P1_MPMUR0, 0x00000800,
|
|
MX6_MMDC_P0_MDSCR, 0x00000000,
|
|
MX6_MMDC_P0_MAPSR, 0x00011006,
|
|
};
|
|
|
|
static void ccgr_init(void)
|
|
{
|
|
struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
|
|
|
|
writel(0x00C03F3F, &ccm->CCGR0);
|
|
writel(0x0030FC03, &ccm->CCGR1);
|
|
writel(0x0FFFFFF3, &ccm->CCGR2);
|
|
writel(0x3FF0300F, &ccm->CCGR3);
|
|
writel(0x00FFF300, &ccm->CCGR4);
|
|
writel(0x0F0000F3, &ccm->CCGR5);
|
|
writel(0x000003FF, &ccm->CCGR6);
|
|
|
|
/*
|
|
* Setup CCM_CCOSR register as follows:
|
|
*
|
|
* cko1_en = 1 --> CKO1 enabled
|
|
* cko1_div = 111 --> divide by 8
|
|
* cko1_sel = 1011 --> ahb_clk_root
|
|
*
|
|
* This sets CKO1 at ahb_clk_root/8 = 132/8 = 16.5 MHz
|
|
*/
|
|
writel(0x000000FB, &ccm->ccosr);
|
|
}
|
|
|
|
static void ddr_init(int *table, int size)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < size / 2 ; i++)
|
|
writel(table[2 * i + 1], table[2 * i]);
|
|
}
|
|
|
|
static void spl_dram_init(void)
|
|
{
|
|
int minc, maxc;
|
|
|
|
switch (get_cpu_temp_grade(&minc, &maxc)) {
|
|
case TEMP_COMMERCIAL:
|
|
case TEMP_EXTCOMMERCIAL:
|
|
if (is_cpu_type(MXC_CPU_MX6DL)) {
|
|
puts("Commercial temperature grade DDR3 timings, 64bit bus width.\n");
|
|
ddr_init(mx6dl_dcd_table, ARRAY_SIZE(mx6dl_dcd_table));
|
|
} else {
|
|
puts("Commercial temperature grade DDR3 timings, 32bit bus width.\n");
|
|
ddr_init(mx6s_dcd_table, ARRAY_SIZE(mx6s_dcd_table));
|
|
}
|
|
break;
|
|
case TEMP_INDUSTRIAL:
|
|
case TEMP_AUTOMOTIVE:
|
|
default:
|
|
if (is_cpu_type(MXC_CPU_MX6DL)) {
|
|
ddr_init(mx6dl_dcd_table, ARRAY_SIZE(mx6dl_dcd_table));
|
|
} else {
|
|
puts("Industrial temperature grade DDR3 timings, 32bit bus width.\n");
|
|
ddr_init(mx6s_dcd_table, ARRAY_SIZE(mx6s_dcd_table));
|
|
}
|
|
break;
|
|
};
|
|
udelay(100);
|
|
}
|
|
|
|
void board_init_f(ulong dummy)
|
|
{
|
|
/* setup AIPS and disable watchdog */
|
|
arch_cpu_init();
|
|
|
|
ccgr_init();
|
|
gpr_init();
|
|
|
|
/* iomux and setup of i2c */
|
|
board_early_init_f();
|
|
|
|
/* setup GP timer */
|
|
timer_init();
|
|
|
|
/* UART clocks enabled and gd valid - init serial console */
|
|
preloader_console_init();
|
|
|
|
/* Make sure we use dte mode */
|
|
setup_dtemode_uart();
|
|
|
|
/* DDR initialization */
|
|
spl_dram_init();
|
|
|
|
/* Clear the BSS. */
|
|
memset(__bss_start, 0, __bss_end - __bss_start);
|
|
|
|
/* load/boot image from boot device */
|
|
board_init_r(NULL, 0);
|
|
}
|
|
|
|
void reset_cpu(ulong addr)
|
|
{
|
|
}
|
|
|
|
#endif
|
|
|
|
static struct mxc_serial_platdata mxc_serial_plat = {
|
|
.reg = (struct mxc_uart *)UART1_BASE,
|
|
.use_dte = true,
|
|
};
|
|
|
|
U_BOOT_DEVICE(mxc_serial) = {
|
|
.name = "serial_mxc",
|
|
.platdata = &mxc_serial_plat,
|
|
};
|