mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-19 00:18:51 +09:00
![Tom Rini](/assets/img/avatar_default.png)
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
354 lines
8.3 KiB
C
354 lines
8.3 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2004-2011
|
|
* Texas Instruments, <www.ti.com>
|
|
*
|
|
* Author :
|
|
* Manikandan Pillai <mani.pillai@ti.com>
|
|
*
|
|
* Derived from Beagle Board and 3430 SDP code by
|
|
* Richard Woodruff <r-woodruff2@ti.com>
|
|
* Syed Mohammed Khasim <khasim@ti.com>
|
|
*/
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <ns16550.h>
|
|
#include <netdev.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/mem.h>
|
|
#include <asm/arch/mux.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/arch/mmc_host_def.h>
|
|
#include <asm/gpio.h>
|
|
#include <i2c.h>
|
|
#include <twl4030.h>
|
|
#include <asm/mach-types.h>
|
|
#include <asm/omap_musb.h>
|
|
#include <linux/mtd/rawnand.h>
|
|
#include <linux/usb/ch9.h>
|
|
#include <linux/usb/gadget.h>
|
|
#include <linux/usb/musb.h>
|
|
#include "evm.h"
|
|
|
|
#ifdef CONFIG_USB_EHCI_HCD
|
|
#include <usb.h>
|
|
#include <asm/ehci-omap.h>
|
|
#endif
|
|
|
|
#define OMAP3EVM_GPIO_ETH_RST_GEN1 64
|
|
#define OMAP3EVM_GPIO_ETH_RST_GEN2 7
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
static const struct ns16550_platdata omap3_evm_serial = {
|
|
.base = OMAP34XX_UART1,
|
|
.reg_shift = 2,
|
|
.clock = V_NS16550_CLK,
|
|
.fcr = UART_FCR_DEFVAL,
|
|
};
|
|
|
|
U_BOOT_DEVICE(omap3_evm_uart) = {
|
|
"ns16550_serial",
|
|
&omap3_evm_serial
|
|
};
|
|
|
|
static u32 omap3_evm_version;
|
|
|
|
u32 get_omap3_evm_rev(void)
|
|
{
|
|
return omap3_evm_version;
|
|
}
|
|
|
|
static void omap3_evm_get_revision(void)
|
|
{
|
|
#if defined(CONFIG_CMD_NET)
|
|
/*
|
|
* Board revision can be ascertained only by identifying
|
|
* the Ethernet chipset.
|
|
*/
|
|
unsigned int smsc_id;
|
|
|
|
/* Ethernet PHY ID is stored at ID_REV register */
|
|
smsc_id = readl(CONFIG_SMC911X_BASE + 0x50) & 0xFFFF0000;
|
|
printf("Read back SMSC id 0x%x\n", smsc_id);
|
|
|
|
switch (smsc_id) {
|
|
/* SMSC9115 chipset */
|
|
case 0x01150000:
|
|
omap3_evm_version = OMAP3EVM_BOARD_GEN_1;
|
|
break;
|
|
/* SMSC 9220 chipset */
|
|
case 0x92200000:
|
|
default:
|
|
omap3_evm_version = OMAP3EVM_BOARD_GEN_2;
|
|
}
|
|
#else /* !CONFIG_CMD_NET */
|
|
#if defined(CONFIG_STATIC_BOARD_REV)
|
|
/* Look for static defintion of the board revision */
|
|
omap3_evm_version = CONFIG_STATIC_BOARD_REV;
|
|
#else
|
|
/* Fallback to the default above */
|
|
omap3_evm_version = OMAP3EVM_BOARD_GEN_2;
|
|
#endif /* CONFIG_STATIC_BOARD_REV */
|
|
#endif /* CONFIG_CMD_NET */
|
|
}
|
|
|
|
#if defined(CONFIG_USB_MUSB_GADGET) || defined(CONFIG_USB_MUSB_HOST)
|
|
/* MUSB port on OMAP3EVM Rev >= E requires extvbus programming. */
|
|
u8 omap3_evm_need_extvbus(void)
|
|
{
|
|
u8 retval = 0;
|
|
|
|
if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2)
|
|
retval = 1;
|
|
|
|
return retval;
|
|
}
|
|
#endif /* CONFIG_USB_MUSB_{GADGET,HOST} */
|
|
|
|
/*
|
|
* Routine: board_init
|
|
* Description: Early hardware init.
|
|
*/
|
|
int board_init(void)
|
|
{
|
|
gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
|
|
/* board id for Linux */
|
|
gd->bd->bi_arch_number = MACH_TYPE_OMAP3EVM;
|
|
/* boot param addr */
|
|
gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if defined(CONFIG_SPL_OS_BOOT)
|
|
int spl_start_uboot(void)
|
|
{
|
|
/* break into full u-boot on 'c' */
|
|
if (serial_tstc() && serial_getc() == 'c')
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_SPL_OS_BOOT */
|
|
|
|
#if defined(CONFIG_SPL_BUILD)
|
|
/*
|
|
* Routine: get_board_mem_timings
|
|
* Description: If we use SPL then there is no x-loader nor config header
|
|
* so we have to setup the DDR timings ourself on the first bank. This
|
|
* provides the timing values back to the function that configures
|
|
* the memory.
|
|
*/
|
|
void get_board_mem_timings(struct board_sdrc_timings *timings)
|
|
{
|
|
int pop_mfr, pop_id;
|
|
|
|
/*
|
|
* We need to identify what PoP memory is on the board so that
|
|
* we know what timings to use. To map the ID values please see
|
|
* nand_ids.c
|
|
*/
|
|
identify_nand_chip(&pop_mfr, &pop_id);
|
|
|
|
if (pop_mfr == NAND_MFR_HYNIX && pop_id == 0xbc) {
|
|
/* 256MB DDR */
|
|
timings->mcfg = HYNIX_V_MCFG_200(256 << 20);
|
|
timings->ctrla = HYNIX_V_ACTIMA_200;
|
|
timings->ctrlb = HYNIX_V_ACTIMB_200;
|
|
} else {
|
|
/* 128MB DDR */
|
|
timings->mcfg = MICRON_V_MCFG_165(128 << 20);
|
|
timings->ctrla = MICRON_V_ACTIMA_165;
|
|
timings->ctrlb = MICRON_V_ACTIMB_165;
|
|
}
|
|
timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz;
|
|
timings->mr = MICRON_V_MR_165;
|
|
}
|
|
#endif /* CONFIG_SPL_BUILD */
|
|
|
|
#if defined(CONFIG_USB_MUSB_OMAP2PLUS)
|
|
static struct musb_hdrc_config musb_config = {
|
|
.multipoint = 1,
|
|
.dyn_fifo = 1,
|
|
.num_eps = 16,
|
|
.ram_bits = 12,
|
|
};
|
|
|
|
static struct omap_musb_board_data musb_board_data = {
|
|
.interface_type = MUSB_INTERFACE_ULPI,
|
|
};
|
|
|
|
static struct musb_hdrc_platform_data musb_plat = {
|
|
#if defined(CONFIG_USB_MUSB_HOST)
|
|
.mode = MUSB_HOST,
|
|
#elif defined(CONFIG_USB_MUSB_GADGET)
|
|
.mode = MUSB_PERIPHERAL,
|
|
#else
|
|
#error "Please define either CONFIG_USB_MUSB_HOST or CONFIG_USB_MUSB_GADGET"
|
|
#endif /* CONFIG_USB_MUSB_{GADGET,HOST} */
|
|
.config = &musb_config,
|
|
.power = 100,
|
|
.platform_ops = &omap2430_ops,
|
|
.board_data = &musb_board_data,
|
|
};
|
|
#endif /* CONFIG_USB_MUSB_OMAP2PLUS */
|
|
|
|
/*
|
|
* Routine: misc_init_r
|
|
* Description: Init ethernet (done here so udelay works)
|
|
*/
|
|
int misc_init_r(void)
|
|
{
|
|
twl4030_power_init();
|
|
|
|
#ifdef CONFIG_SYS_I2C_OMAP24XX
|
|
i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
|
|
#endif
|
|
|
|
#if defined(CONFIG_CMD_NET)
|
|
setup_net_chip();
|
|
#endif
|
|
omap3_evm_get_revision();
|
|
|
|
#if defined(CONFIG_CMD_NET)
|
|
reset_net_chip();
|
|
#endif
|
|
omap_die_id_display();
|
|
|
|
#if defined(CONFIG_USB_MUSB_OMAP2PLUS)
|
|
musb_register(&musb_plat, &musb_board_data, (void *)MUSB_BASE);
|
|
#endif
|
|
|
|
#if defined(CONFIG_USB_ETHER) && defined(CONFIG_USB_MUSB_GADGET)
|
|
omap_die_id_usbethaddr();
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Routine: set_muxconf_regs
|
|
* Description: Setting up the configuration Mux registers specific to the
|
|
* hardware. Many pins need to be moved from protect to primary
|
|
* mode.
|
|
*/
|
|
void set_muxconf_regs(void)
|
|
{
|
|
MUX_EVM();
|
|
}
|
|
|
|
#if defined(CONFIG_CMD_NET)
|
|
/*
|
|
* Routine: setup_net_chip
|
|
* Description: Setting up the configuration GPMC registers specific to the
|
|
* Ethernet hardware.
|
|
*/
|
|
static void setup_net_chip(void)
|
|
{
|
|
struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE;
|
|
|
|
/* Configure GPMC registers */
|
|
writel(NET_GPMC_CONFIG1, &gpmc_cfg->cs[5].config1);
|
|
writel(NET_GPMC_CONFIG2, &gpmc_cfg->cs[5].config2);
|
|
writel(NET_GPMC_CONFIG3, &gpmc_cfg->cs[5].config3);
|
|
writel(NET_GPMC_CONFIG4, &gpmc_cfg->cs[5].config4);
|
|
writel(NET_GPMC_CONFIG5, &gpmc_cfg->cs[5].config5);
|
|
writel(NET_GPMC_CONFIG6, &gpmc_cfg->cs[5].config6);
|
|
writel(NET_GPMC_CONFIG7, &gpmc_cfg->cs[5].config7);
|
|
|
|
/* Enable off mode for NWE in PADCONF_GPMC_NWE register */
|
|
writew(readw(&ctrl_base ->gpmc_nwe) | 0x0E00, &ctrl_base->gpmc_nwe);
|
|
/* Enable off mode for NOE in PADCONF_GPMC_NADV_ALE register */
|
|
writew(readw(&ctrl_base->gpmc_noe) | 0x0E00, &ctrl_base->gpmc_noe);
|
|
/* Enable off mode for ALE in PADCONF_GPMC_NADV_ALE register */
|
|
writew(readw(&ctrl_base->gpmc_nadv_ale) | 0x0E00,
|
|
&ctrl_base->gpmc_nadv_ale);
|
|
}
|
|
|
|
/**
|
|
* Reset the ethernet chip.
|
|
*/
|
|
static void reset_net_chip(void)
|
|
{
|
|
int ret;
|
|
int rst_gpio;
|
|
|
|
if (get_omap3_evm_rev() == OMAP3EVM_BOARD_GEN_1) {
|
|
rst_gpio = OMAP3EVM_GPIO_ETH_RST_GEN1;
|
|
} else {
|
|
rst_gpio = OMAP3EVM_GPIO_ETH_RST_GEN2;
|
|
}
|
|
|
|
ret = gpio_request(rst_gpio, "");
|
|
if (ret < 0) {
|
|
printf("Unable to get GPIO %d\n", rst_gpio);
|
|
return ;
|
|
}
|
|
|
|
/* Configure as output */
|
|
gpio_direction_output(rst_gpio, 0);
|
|
|
|
/* Send a pulse on the GPIO pin */
|
|
gpio_set_value(rst_gpio, 1);
|
|
udelay(1);
|
|
gpio_set_value(rst_gpio, 0);
|
|
udelay(1);
|
|
gpio_set_value(rst_gpio, 1);
|
|
}
|
|
|
|
int board_eth_init(bd_t *bis)
|
|
{
|
|
#if defined(CONFIG_SMC911X)
|
|
env_set("ethaddr", NULL);
|
|
return smc911x_initialize(0, CONFIG_SMC911X_BASE);
|
|
#else
|
|
return 0;
|
|
#endif
|
|
}
|
|
#endif /* CONFIG_CMD_NET */
|
|
|
|
#if defined(CONFIG_MMC)
|
|
int board_mmc_init(bd_t *bis)
|
|
{
|
|
return omap_mmc_init(0, 0, 0, -1, -1);
|
|
}
|
|
|
|
void board_mmc_power_init(void)
|
|
{
|
|
twl4030_power_mmc_init(0);
|
|
}
|
|
#endif /* CONFIG_MMC */
|
|
|
|
#if defined(CONFIG_USB_EHCI_HCD) && !defined(CONFIG_SPL_BUILD)
|
|
/* Call usb_stop() before starting the kernel */
|
|
void show_boot_progress(int val)
|
|
{
|
|
if (val == BOOTSTAGE_ID_RUN_OS)
|
|
usb_stop();
|
|
}
|
|
|
|
static struct omap_usbhs_board_data usbhs_bdata = {
|
|
.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
|
|
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
|
|
.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED
|
|
};
|
|
|
|
int ehci_hcd_init(int index, enum usb_init_type init,
|
|
struct ehci_hccr **hccr, struct ehci_hcor **hcor)
|
|
{
|
|
return omap_ehci_hcd_init(index, &usbhs_bdata, hccr, hcor);
|
|
}
|
|
|
|
int ehci_hcd_stop(int index)
|
|
{
|
|
return omap_ehci_hcd_stop();
|
|
}
|
|
#endif /* CONFIG_USB_EHCI_HCD */
|
|
|
|
#if defined(CONFIG_USB_ETHER) && defined(CONFIG_USB_MUSB_GADGET) && !defined(CONFIG_CMD_NET)
|
|
int board_eth_init(bd_t *bis)
|
|
{
|
|
return usb_eth_initialize(bis);
|
|
}
|
|
#endif /* CONFIG_USB_ETHER */
|