mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-09-01 06:48:52 +09:00
![Andy Fleming](/assets/img/avatar_default.png)
The fsl_phy_enet_if enum was, essentially, the phy_interface_t enum. This meant that drivers which used fsl_phy_enet_if to deal with PHY interfaces would have to convert between the two (or we would have to have them mirror each other, and deal with the ensuing maintenance headache). Instead, we switch all clients of fsl_phy_enet_if over to phy_interface_t, which should become the standard, anyway. Signed-off-by: Andy Fleming <afleming@freescale.com> Acked-by: Detlev Zundel <dzu@denx.de>
422 lines
11 KiB
C
422 lines
11 KiB
C
/*
|
|
* Copyright (C) 2006,2010 Freescale Semiconductor, Inc.
|
|
* Dave Liu <daveliu@freescale.com>
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <ioports.h>
|
|
#include <mpc83xx.h>
|
|
#include <i2c.h>
|
|
#include <miiphy.h>
|
|
#include <phy.h>
|
|
#if defined(CONFIG_PCI)
|
|
#include <pci.h>
|
|
#endif
|
|
#include <spd_sdram.h>
|
|
#include <asm/mmu.h>
|
|
#include <asm/io.h>
|
|
#include <asm/fsl_enet.h>
|
|
#if defined(CONFIG_OF_LIBFDT)
|
|
#include <libfdt.h>
|
|
#endif
|
|
#include <hwconfig.h>
|
|
#include <fdt_support.h>
|
|
#if defined(CONFIG_PQ_MDS_PIB)
|
|
#include "../common/pq-mds-pib.h"
|
|
#endif
|
|
#include "../../../drivers/qe/uec.h"
|
|
|
|
const qe_iop_conf_t qe_iop_conf_tab[] = {
|
|
/* GETH1 */
|
|
{0, 3, 1, 0, 1}, /* TxD0 */
|
|
{0, 4, 1, 0, 1}, /* TxD1 */
|
|
{0, 5, 1, 0, 1}, /* TxD2 */
|
|
{0, 6, 1, 0, 1}, /* TxD3 */
|
|
{1, 6, 1, 0, 3}, /* TxD4 */
|
|
{1, 7, 1, 0, 1}, /* TxD5 */
|
|
{1, 9, 1, 0, 2}, /* TxD6 */
|
|
{1, 10, 1, 0, 2}, /* TxD7 */
|
|
{0, 9, 2, 0, 1}, /* RxD0 */
|
|
{0, 10, 2, 0, 1}, /* RxD1 */
|
|
{0, 11, 2, 0, 1}, /* RxD2 */
|
|
{0, 12, 2, 0, 1}, /* RxD3 */
|
|
{0, 13, 2, 0, 1}, /* RxD4 */
|
|
{1, 1, 2, 0, 2}, /* RxD5 */
|
|
{1, 0, 2, 0, 2}, /* RxD6 */
|
|
{1, 4, 2, 0, 2}, /* RxD7 */
|
|
{0, 7, 1, 0, 1}, /* TX_EN */
|
|
{0, 8, 1, 0, 1}, /* TX_ER */
|
|
{0, 15, 2, 0, 1}, /* RX_DV */
|
|
{0, 16, 2, 0, 1}, /* RX_ER */
|
|
{0, 0, 2, 0, 1}, /* RX_CLK */
|
|
{2, 9, 1, 0, 3}, /* GTX_CLK - CLK10 */
|
|
{2, 8, 2, 0, 1}, /* GTX125 - CLK9 */
|
|
/* GETH2 */
|
|
{0, 17, 1, 0, 1}, /* TxD0 */
|
|
{0, 18, 1, 0, 1}, /* TxD1 */
|
|
{0, 19, 1, 0, 1}, /* TxD2 */
|
|
{0, 20, 1, 0, 1}, /* TxD3 */
|
|
{1, 2, 1, 0, 1}, /* TxD4 */
|
|
{1, 3, 1, 0, 2}, /* TxD5 */
|
|
{1, 5, 1, 0, 3}, /* TxD6 */
|
|
{1, 8, 1, 0, 3}, /* TxD7 */
|
|
{0, 23, 2, 0, 1}, /* RxD0 */
|
|
{0, 24, 2, 0, 1}, /* RxD1 */
|
|
{0, 25, 2, 0, 1}, /* RxD2 */
|
|
{0, 26, 2, 0, 1}, /* RxD3 */
|
|
{0, 27, 2, 0, 1}, /* RxD4 */
|
|
{1, 12, 2, 0, 2}, /* RxD5 */
|
|
{1, 13, 2, 0, 3}, /* RxD6 */
|
|
{1, 11, 2, 0, 2}, /* RxD7 */
|
|
{0, 21, 1, 0, 1}, /* TX_EN */
|
|
{0, 22, 1, 0, 1}, /* TX_ER */
|
|
{0, 29, 2, 0, 1}, /* RX_DV */
|
|
{0, 30, 2, 0, 1}, /* RX_ER */
|
|
{0, 31, 2, 0, 1}, /* RX_CLK */
|
|
{2, 2, 1, 0, 2}, /* GTX_CLK = CLK10 */
|
|
{2, 3, 2, 0, 1}, /* GTX125 - CLK4 */
|
|
|
|
{0, 1, 3, 0, 2}, /* MDIO */
|
|
{0, 2, 1, 0, 1}, /* MDC */
|
|
|
|
{5, 0, 1, 0, 2}, /* UART2_SOUT */
|
|
{5, 1, 2, 0, 3}, /* UART2_CTS */
|
|
{5, 2, 1, 0, 1}, /* UART2_RTS */
|
|
{5, 3, 2, 0, 2}, /* UART2_SIN */
|
|
|
|
{0, 0, 0, 0, QE_IOP_TAB_END}, /* END of table */
|
|
};
|
|
|
|
/* Handle "mpc8360ea rev.2.1 erratum 2: RGMII Timing"? */
|
|
static int board_handle_erratum2(void)
|
|
{
|
|
const immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
|
|
|
|
return REVID_MAJOR(immr->sysconf.spridr) == 2 &&
|
|
REVID_MINOR(immr->sysconf.spridr) == 1;
|
|
}
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
const immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
|
|
u8 *bcsr = (u8 *)CONFIG_SYS_BCSR;
|
|
|
|
/* Enable flash write */
|
|
bcsr[0xa] &= ~0x04;
|
|
|
|
/* Disable G1TXCLK, G2TXCLK h/w buffers (rev.2.x h/w bug workaround) */
|
|
if (REVID_MAJOR(immr->sysconf.spridr) == 2)
|
|
bcsr[0xe] = 0x30;
|
|
|
|
/* Enable second UART */
|
|
bcsr[0x9] &= ~0x01;
|
|
|
|
if (board_handle_erratum2()) {
|
|
void *immap = (immap_t *)(CONFIG_SYS_IMMR + 0x14a8);
|
|
|
|
/*
|
|
* IMMR + 0x14A8[4:5] = 11 (clk delay for UCC 2)
|
|
* IMMR + 0x14A8[18:19] = 11 (clk delay for UCC 1)
|
|
*/
|
|
setbits_be32(immap, 0x0c003000);
|
|
|
|
/*
|
|
* IMMR + 0x14AC[20:27] = 10101010
|
|
* (data delay for both UCC's)
|
|
*/
|
|
clrsetbits_be32(immap + 4, 0xff0, 0xaa0);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
int board_early_init_r(void)
|
|
{
|
|
#ifdef CONFIG_PQ_MDS_PIB
|
|
pib_init();
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_UEC_ETH
|
|
static uec_info_t uec_info[] = {
|
|
#ifdef CONFIG_UEC_ETH1
|
|
STD_UEC_INFO(1),
|
|
#endif
|
|
#ifdef CONFIG_UEC_ETH2
|
|
STD_UEC_INFO(2),
|
|
#endif
|
|
};
|
|
|
|
int board_eth_init(bd_t *bd)
|
|
{
|
|
if (board_handle_erratum2()) {
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(uec_info); i++)
|
|
uec_info[i].enet_interface_type =
|
|
PHY_INTERFACE_MODE_RGMII_RXID;
|
|
uec_info[i].speed = SPEED_1000;
|
|
}
|
|
return uec_eth_init(bd, uec_info, ARRAY_SIZE(uec_info));
|
|
}
|
|
#endif /* CONFIG_UEC_ETH */
|
|
|
|
#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
|
|
extern void ddr_enable_ecc(unsigned int dram_size);
|
|
#endif
|
|
int fixed_sdram(void);
|
|
static int sdram_init(unsigned int base);
|
|
|
|
phys_size_t initdram(int board_type)
|
|
{
|
|
volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
|
|
u32 msize = 0;
|
|
u32 lbc_sdram_size;
|
|
|
|
if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im)
|
|
return -1;
|
|
|
|
/* DDR SDRAM - Main SODIMM */
|
|
im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR;
|
|
#if defined(CONFIG_SPD_EEPROM)
|
|
msize = spd_sdram();
|
|
#else
|
|
msize = fixed_sdram();
|
|
#endif
|
|
|
|
#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
|
|
/*
|
|
* Initialize DDR ECC byte
|
|
*/
|
|
ddr_enable_ecc(msize * 1024 * 1024);
|
|
#endif
|
|
/*
|
|
* Initialize SDRAM if it is on local bus.
|
|
*/
|
|
lbc_sdram_size = sdram_init(msize * 1024 * 1024);
|
|
if (!msize)
|
|
msize = lbc_sdram_size;
|
|
|
|
/* return total bus SDRAM size(bytes) -- DDR */
|
|
return (msize * 1024 * 1024);
|
|
}
|
|
|
|
#if !defined(CONFIG_SPD_EEPROM)
|
|
/*************************************************************************
|
|
* fixed sdram init -- doesn't use serial presence detect.
|
|
************************************************************************/
|
|
int fixed_sdram(void)
|
|
{
|
|
volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
|
|
u32 msize = 0;
|
|
u32 ddr_size;
|
|
u32 ddr_size_log2;
|
|
|
|
msize = CONFIG_SYS_DDR_SIZE;
|
|
for (ddr_size = msize << 20, ddr_size_log2 = 0;
|
|
(ddr_size > 1); ddr_size = ddr_size >> 1, ddr_size_log2++) {
|
|
if (ddr_size & 1) {
|
|
return -1;
|
|
}
|
|
}
|
|
im->sysconf.ddrlaw[0].ar =
|
|
LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
|
|
#if (CONFIG_SYS_DDR_SIZE != 256)
|
|
#warning Currenly any ddr size other than 256 is not supported
|
|
#endif
|
|
#ifdef CONFIG_DDR_II
|
|
im->ddr.csbnds[0].csbnds = CONFIG_SYS_DDR_CS0_BNDS;
|
|
im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG;
|
|
im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
|
|
im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
|
|
im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
|
|
im->ddr.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
|
|
im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG;
|
|
im->ddr.sdram_cfg2 = CONFIG_SYS_DDR_SDRAM_CFG2;
|
|
im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE;
|
|
im->ddr.sdram_mode2 = CONFIG_SYS_DDR_MODE2;
|
|
im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
|
|
im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CNTL;
|
|
#else
|
|
im->ddr.csbnds[0].csbnds = 0x00000007;
|
|
im->ddr.csbnds[1].csbnds = 0x0008000f;
|
|
|
|
im->ddr.cs_config[0] = CONFIG_SYS_DDR_CONFIG;
|
|
im->ddr.cs_config[1] = CONFIG_SYS_DDR_CONFIG;
|
|
|
|
im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
|
|
im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
|
|
im->ddr.sdram_cfg = CONFIG_SYS_DDR_CONTROL;
|
|
|
|
im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE;
|
|
im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
|
|
#endif
|
|
udelay(200);
|
|
im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
|
|
|
|
return msize;
|
|
}
|
|
#endif /*!CONFIG_SYS_SPD_EEPROM */
|
|
|
|
int checkboard(void)
|
|
{
|
|
puts("Board: Freescale MPC8360EMDS\n");
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* if MPC8360EMDS is soldered with SDRAM
|
|
*/
|
|
#ifdef CONFIG_SYS_LB_SDRAM
|
|
/*
|
|
* Initialize SDRAM memory on the Local Bus.
|
|
*/
|
|
|
|
static int sdram_init(unsigned int base)
|
|
{
|
|
volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
|
|
fsl_lbc_t *lbc = LBC_BASE_ADDR;
|
|
const int sdram_size = CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024;
|
|
int rem = base % sdram_size;
|
|
uint *sdram_addr;
|
|
|
|
/* window base address should be aligned to the window size */
|
|
if (rem)
|
|
base = base - rem + sdram_size;
|
|
|
|
sdram_addr = (uint *)base;
|
|
/*
|
|
* Setup SDRAM Base and Option Registers
|
|
*/
|
|
set_lbc_br(2, base | CONFIG_SYS_BR2);
|
|
set_lbc_or(2, CONFIG_SYS_OR2);
|
|
immap->sysconf.lblaw[2].bar = base;
|
|
immap->sysconf.lblaw[2].ar = CONFIG_SYS_LBLAWAR2;
|
|
|
|
/*setup mtrpt, lsrt and lbcr for LB bus */
|
|
lbc->lbcr = CONFIG_SYS_LBC_LBCR;
|
|
lbc->mrtpr = CONFIG_SYS_LBC_MRTPR;
|
|
lbc->lsrt = CONFIG_SYS_LBC_LSRT;
|
|
asm("sync");
|
|
|
|
/*
|
|
* Configure the SDRAM controller Machine Mode Register.
|
|
*/
|
|
lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5; /* Normal Operation */
|
|
lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_1; /* Precharge All Banks */
|
|
asm("sync");
|
|
*sdram_addr = 0xff;
|
|
udelay(100);
|
|
|
|
/*
|
|
* We need do 8 times auto refresh operation.
|
|
*/
|
|
lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_2;
|
|
asm("sync");
|
|
*sdram_addr = 0xff; /* 1 times */
|
|
udelay(100);
|
|
*sdram_addr = 0xff; /* 2 times */
|
|
udelay(100);
|
|
*sdram_addr = 0xff; /* 3 times */
|
|
udelay(100);
|
|
*sdram_addr = 0xff; /* 4 times */
|
|
udelay(100);
|
|
*sdram_addr = 0xff; /* 5 times */
|
|
udelay(100);
|
|
*sdram_addr = 0xff; /* 6 times */
|
|
udelay(100);
|
|
*sdram_addr = 0xff; /* 7 times */
|
|
udelay(100);
|
|
*sdram_addr = 0xff; /* 8 times */
|
|
udelay(100);
|
|
|
|
/* Mode register write operation */
|
|
lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_4;
|
|
asm("sync");
|
|
*(sdram_addr + 0xcc) = 0xff;
|
|
udelay(100);
|
|
|
|
/* Normal operation */
|
|
lbc->lsdmr = CONFIG_SYS_LBC_LSDMR_5 | 0x40000000;
|
|
asm("sync");
|
|
*sdram_addr = 0xff;
|
|
udelay(100);
|
|
|
|
/*
|
|
* In non-aligned case we don't [normally] use that memory because
|
|
* there is a hole.
|
|
*/
|
|
if (rem)
|
|
return 0;
|
|
return CONFIG_SYS_LBC_SDRAM_SIZE;
|
|
}
|
|
#else
|
|
static int sdram_init(unsigned int base) { return 0; }
|
|
#endif
|
|
|
|
#if defined(CONFIG_OF_BOARD_SETUP)
|
|
static void ft_board_fixup_qe_usb(void *blob, bd_t *bd)
|
|
{
|
|
if (!hwconfig_subarg_cmp("qe_usb", "mode", "peripheral"))
|
|
return;
|
|
|
|
do_fixup_by_compat(blob, "fsl,mpc8323-qe-usb", "mode",
|
|
"peripheral", sizeof("peripheral"), 1);
|
|
}
|
|
|
|
void ft_board_setup(void *blob, bd_t *bd)
|
|
{
|
|
ft_cpu_setup(blob, bd);
|
|
#ifdef CONFIG_PCI
|
|
ft_pci_setup(blob, bd);
|
|
#endif
|
|
ft_board_fixup_qe_usb(blob, bd);
|
|
/*
|
|
* mpc8360ea pb mds errata 2: RGMII timing
|
|
* if on mpc8360ea rev. 2.1,
|
|
* change both ucc phy-connection-types from rgmii-id to rgmii-rxid
|
|
*/
|
|
if (board_handle_erratum2()) {
|
|
int nodeoffset;
|
|
const char *prop;
|
|
int path;
|
|
|
|
nodeoffset = fdt_path_offset(blob, "/aliases");
|
|
if (nodeoffset >= 0) {
|
|
#if defined(CONFIG_HAS_ETH0)
|
|
/* fixup UCC 1 if using rgmii-id mode */
|
|
prop = fdt_getprop(blob, nodeoffset, "ethernet0", NULL);
|
|
if (prop) {
|
|
path = fdt_path_offset(blob, prop);
|
|
prop = fdt_getprop(blob, path,
|
|
"phy-connection-type", 0);
|
|
if (prop && (strcmp(prop, "rgmii-id") == 0))
|
|
fdt_fixup_phy_connection(blob, path,
|
|
PHY_INTERFACE_MODE_RGMII_RXID);
|
|
}
|
|
#endif
|
|
#if defined(CONFIG_HAS_ETH1)
|
|
/* fixup UCC 2 if using rgmii-id mode */
|
|
prop = fdt_getprop(blob, nodeoffset, "ethernet1", NULL);
|
|
if (prop) {
|
|
path = fdt_path_offset(blob, prop);
|
|
prop = fdt_getprop(blob, path,
|
|
"phy-connection-type", 0);
|
|
if (prop && (strcmp(prop, "rgmii-id") == 0))
|
|
fdt_fixup_phy_connection(blob, path,
|
|
PHY_INTERFACE_MODE_RGMII_RXID);
|
|
}
|
|
#endif
|
|
}
|
|
}
|
|
}
|
|
#endif
|