mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-25 03:18:51 +09:00
![Simon Glass](/assets/img/avatar_default.png)
These support the flat device tree. We want to use the dev_read_..() prefix for functions that support both flat tree and live tree. So rename the existing functions to avoid confusion. In the end we will have: 1. dev_read_addr...() - works on devices, supports flat/live tree 2. devfdt_get_addr...() - current functions, flat tree only 3. of_get_address() etc. - new functions, live tree only All drivers will be written to use 1. That function will in turn call either 2 or 3 depending on whether the flat or live tree is in use. Note this involves changing some dead code - the imx_lpi2c.c file. Signed-off-by: Simon Glass <sjg@chromium.org>
463 lines
10 KiB
C
463 lines
10 KiB
C
/*
|
|
* Copyright 2016 Freescale Semiconductors, Inc.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <errno.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/imx-regs.h>
|
|
#include <asm/arch/imx_lpi2c.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <dm.h>
|
|
#include <fdtdec.h>
|
|
#include <i2c.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
#define LPI2C_FIFO_SIZE 4
|
|
#define LPI2C_TIMEOUT_MS 100
|
|
|
|
/* Weak linked function for overridden by some SoC power function */
|
|
int __weak init_i2c_power(unsigned i2c_num)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int imx_lpci2c_check_busy_bus(const struct imx_lpi2c_reg *regs)
|
|
{
|
|
lpi2c_status_t result = LPI2C_SUCESS;
|
|
u32 status;
|
|
|
|
status = readl(®s->msr);
|
|
|
|
if ((status & LPI2C_MSR_BBF_MASK) && !(status & LPI2C_MSR_MBF_MASK))
|
|
result = LPI2C_BUSY;
|
|
|
|
return result;
|
|
}
|
|
|
|
static int imx_lpci2c_check_clear_error(struct imx_lpi2c_reg *regs)
|
|
{
|
|
lpi2c_status_t result = LPI2C_SUCESS;
|
|
u32 val, status;
|
|
|
|
status = readl(®s->msr);
|
|
/* errors to check for */
|
|
status &= LPI2C_MSR_NDF_MASK | LPI2C_MSR_ALF_MASK |
|
|
LPI2C_MSR_FEF_MASK | LPI2C_MSR_PLTF_MASK;
|
|
|
|
if (status) {
|
|
if (status & LPI2C_MSR_PLTF_MASK)
|
|
result = LPI2C_PIN_LOW_TIMEOUT_ERR;
|
|
else if (status & LPI2C_MSR_ALF_MASK)
|
|
result = LPI2C_ARB_LOST_ERR;
|
|
else if (status & LPI2C_MSR_NDF_MASK)
|
|
result = LPI2C_NAK_ERR;
|
|
else if (status & LPI2C_MSR_FEF_MASK)
|
|
result = LPI2C_FIFO_ERR;
|
|
|
|
/* clear status flags */
|
|
writel(0x7f00, ®s->msr);
|
|
/* reset fifos */
|
|
val = readl(®s->mcr);
|
|
val |= LPI2C_MCR_RRF_MASK | LPI2C_MCR_RTF_MASK;
|
|
writel(val, ®s->mcr);
|
|
}
|
|
|
|
return result;
|
|
}
|
|
|
|
static int bus_i2c_wait_for_tx_ready(struct imx_lpi2c_reg *regs)
|
|
{
|
|
lpi2c_status_t result = LPI2C_SUCESS;
|
|
u32 txcount = 0;
|
|
ulong start_time = get_timer(0);
|
|
|
|
do {
|
|
txcount = LPI2C_MFSR_TXCOUNT(readl(®s->mfsr));
|
|
txcount = LPI2C_FIFO_SIZE - txcount;
|
|
result = imx_lpci2c_check_clear_error(regs);
|
|
if (result) {
|
|
debug("i2c: wait for tx ready: result 0x%x\n", result);
|
|
return result;
|
|
}
|
|
if (get_timer(start_time) > LPI2C_TIMEOUT_MS) {
|
|
debug("i2c: wait for tx ready: timeout\n");
|
|
return -1;
|
|
}
|
|
} while (!txcount);
|
|
|
|
return result;
|
|
}
|
|
|
|
static int bus_i2c_send(struct imx_lpi2c_reg *regs, u8 *txbuf, int len)
|
|
{
|
|
lpi2c_status_t result = LPI2C_SUCESS;
|
|
|
|
/* empty tx */
|
|
if (!len)
|
|
return result;
|
|
|
|
while (len--) {
|
|
result = bus_i2c_wait_for_tx_ready(regs);
|
|
if (result) {
|
|
debug("i2c: send wait fot tx ready: %d\n", result);
|
|
return result;
|
|
}
|
|
writel(*txbuf++, ®s->mtdr);
|
|
}
|
|
|
|
return result;
|
|
}
|
|
|
|
static int bus_i2c_receive(struct imx_lpi2c_reg *regs, u8 *rxbuf, int len)
|
|
{
|
|
lpi2c_status_t result = LPI2C_SUCESS;
|
|
u32 val;
|
|
ulong start_time = get_timer(0);
|
|
|
|
/* empty read */
|
|
if (!len)
|
|
return result;
|
|
|
|
result = bus_i2c_wait_for_tx_ready(regs);
|
|
if (result) {
|
|
debug("i2c: receive wait fot tx ready: %d\n", result);
|
|
return result;
|
|
}
|
|
|
|
/* clear all status flags */
|
|
writel(0x7f00, ®s->msr);
|
|
/* send receive command */
|
|
val = LPI2C_MTDR_CMD(0x1) | LPI2C_MTDR_DATA(len - 1);
|
|
writel(val, ®s->mtdr);
|
|
|
|
while (len--) {
|
|
do {
|
|
result = imx_lpci2c_check_clear_error(regs);
|
|
if (result) {
|
|
debug("i2c: receive check clear error: %d\n",
|
|
result);
|
|
return result;
|
|
}
|
|
if (get_timer(start_time) > LPI2C_TIMEOUT_MS) {
|
|
debug("i2c: receive mrdr: timeout\n");
|
|
return -1;
|
|
}
|
|
val = readl(®s->mrdr);
|
|
} while (val & LPI2C_MRDR_RXEMPTY_MASK);
|
|
*rxbuf++ = LPI2C_MRDR_DATA(val);
|
|
}
|
|
|
|
return result;
|
|
}
|
|
|
|
static int bus_i2c_start(struct imx_lpi2c_reg *regs, u8 addr, u8 dir)
|
|
{
|
|
lpi2c_status_t result = LPI2C_SUCESS;
|
|
u32 val;
|
|
|
|
result = imx_lpci2c_check_busy_bus(regs);
|
|
if (result) {
|
|
debug("i2c: start check busy bus: 0x%x\n", result);
|
|
return result;
|
|
}
|
|
/* clear all status flags */
|
|
writel(0x7f00, ®s->msr);
|
|
/* turn off auto-stop condition */
|
|
val = readl(®s->mcfgr1) & ~LPI2C_MCFGR1_AUTOSTOP_MASK;
|
|
writel(val, ®s->mcfgr1);
|
|
/* wait tx fifo ready */
|
|
result = bus_i2c_wait_for_tx_ready(regs);
|
|
if (result) {
|
|
debug("i2c: start wait for tx ready: 0x%x\n", result);
|
|
return result;
|
|
}
|
|
/* issue start command */
|
|
val = LPI2C_MTDR_CMD(0x4) | (addr << 0x1) | dir;
|
|
writel(val, ®s->mtdr);
|
|
|
|
return result;
|
|
}
|
|
|
|
static int bus_i2c_stop(struct imx_lpi2c_reg *regs)
|
|
{
|
|
lpi2c_status_t result = LPI2C_SUCESS;
|
|
u32 status;
|
|
|
|
result = bus_i2c_wait_for_tx_ready(regs);
|
|
if (result) {
|
|
debug("i2c: stop wait for tx ready: 0x%x\n", result);
|
|
return result;
|
|
}
|
|
|
|
/* send stop command */
|
|
writel(LPI2C_MTDR_CMD(0x2), ®s->mtdr);
|
|
|
|
while (result == LPI2C_SUCESS) {
|
|
status = readl(®s->msr);
|
|
result = imx_lpci2c_check_clear_error(regs);
|
|
/* stop detect flag */
|
|
if (status & LPI2C_MSR_SDF_MASK) {
|
|
/* clear stop flag */
|
|
status &= LPI2C_MSR_SDF_MASK;
|
|
writel(status, ®s->msr);
|
|
break;
|
|
}
|
|
}
|
|
|
|
return result;
|
|
}
|
|
|
|
static int bus_i2c_read(struct imx_lpi2c_reg *regs, u32 chip, u8 *buf, int len)
|
|
{
|
|
lpi2c_status_t result = LPI2C_SUCESS;
|
|
|
|
result = bus_i2c_start(regs, chip, 1);
|
|
if (result)
|
|
return result;
|
|
result = bus_i2c_receive(regs, buf, len);
|
|
if (result)
|
|
return result;
|
|
result = bus_i2c_stop(regs);
|
|
if (result)
|
|
return result;
|
|
|
|
return result;
|
|
}
|
|
|
|
static int bus_i2c_write(struct imx_lpi2c_reg *regs, u32 chip, u8 *buf, int len)
|
|
{
|
|
lpi2c_status_t result = LPI2C_SUCESS;
|
|
|
|
result = bus_i2c_start(regs, chip, 0);
|
|
if (result)
|
|
return result;
|
|
result = bus_i2c_send(regs, buf, len);
|
|
if (result)
|
|
return result;
|
|
result = bus_i2c_stop(regs);
|
|
if (result)
|
|
return result;
|
|
|
|
return result;
|
|
}
|
|
|
|
|
|
static int bus_i2c_set_bus_speed(struct udevice *bus, int speed)
|
|
{
|
|
struct imx_lpi2c_reg *regs;
|
|
u32 val;
|
|
u32 preescale = 0, best_pre = 0, clkhi = 0;
|
|
u32 best_clkhi = 0, abs_error = 0, rate;
|
|
u32 error = 0xffffffff;
|
|
u32 clock_rate;
|
|
bool mode;
|
|
int i;
|
|
|
|
regs = (struct imx_lpi2c_reg *)devfdt_get_addr(bus);
|
|
clock_rate = imx_get_i2cclk(bus->seq + 4);
|
|
if (!clock_rate)
|
|
return -EPERM;
|
|
|
|
mode = (readl(®s->mcr) & LPI2C_MCR_MEN_MASK) >> LPI2C_MCR_MEN_SHIFT;
|
|
/* disable master mode */
|
|
val = readl(®s->mcr) & ~LPI2C_MCR_MEN_MASK;
|
|
writel(val | LPI2C_MCR_MEN(0), ®s->mcr);
|
|
|
|
for (preescale = 1; (preescale <= 128) &&
|
|
(error != 0); preescale = 2 * preescale) {
|
|
for (clkhi = 1; clkhi < 32; clkhi++) {
|
|
if (clkhi == 1)
|
|
rate = (clock_rate / preescale) / (1 + 3 + 2 + 2 / preescale);
|
|
else
|
|
rate = (clock_rate / preescale / (3 * clkhi + 2 + 2 / preescale));
|
|
|
|
abs_error = speed > rate ? speed - rate : rate - speed;
|
|
|
|
if (abs_error < error) {
|
|
best_pre = preescale;
|
|
best_clkhi = clkhi;
|
|
error = abs_error;
|
|
if (abs_error == 0)
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Standard, fast, fast mode plus and ultra-fast transfers. */
|
|
val = LPI2C_MCCR0_CLKHI(best_clkhi);
|
|
if (best_clkhi < 2)
|
|
val |= LPI2C_MCCR0_CLKLO(3) | LPI2C_MCCR0_SETHOLD(2) | LPI2C_MCCR0_DATAVD(1);
|
|
else
|
|
val |= LPI2C_MCCR0_CLKLO(2 * best_clkhi) | LPI2C_MCCR0_SETHOLD(best_clkhi) |
|
|
LPI2C_MCCR0_DATAVD(best_clkhi / 2);
|
|
writel(val, ®s->mccr0);
|
|
|
|
for (i = 0; i < 8; i++) {
|
|
if (best_pre == (1 << i)) {
|
|
best_pre = i;
|
|
break;
|
|
}
|
|
}
|
|
|
|
val = readl(®s->mcfgr1) & ~LPI2C_MCFGR1_PRESCALE_MASK;
|
|
writel(val | LPI2C_MCFGR1_PRESCALE(best_pre), ®s->mcfgr1);
|
|
|
|
if (mode) {
|
|
val = readl(®s->mcr) & ~LPI2C_MCR_MEN_MASK;
|
|
writel(val | LPI2C_MCR_MEN(1), ®s->mcr);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bus_i2c_init(struct udevice *bus, int speed)
|
|
{
|
|
struct imx_lpi2c_reg *regs;
|
|
u32 val;
|
|
int ret;
|
|
|
|
regs = (struct imx_lpi2c_reg *)devfdt_get_addr(bus);
|
|
/* reset peripheral */
|
|
writel(LPI2C_MCR_RST_MASK, ®s->mcr);
|
|
writel(0x0, ®s->mcr);
|
|
/* Disable Dozen mode */
|
|
writel(LPI2C_MCR_DBGEN(0) | LPI2C_MCR_DOZEN(1), ®s->mcr);
|
|
/* host request disable, active high, external pin */
|
|
val = readl(®s->mcfgr0);
|
|
val &= (~(LPI2C_MCFGR0_HREN_MASK | LPI2C_MCFGR0_HRPOL_MASK |
|
|
LPI2C_MCFGR0_HRSEL_MASK));
|
|
val |= LPI2C_MCFGR0_HRPOL(0x1);
|
|
writel(val, ®s->mcfgr0);
|
|
/* pincfg and ignore ack */
|
|
val = readl(®s->mcfgr1);
|
|
val &= ~(LPI2C_MCFGR1_PINCFG_MASK | LPI2C_MCFGR1_IGNACK_MASK);
|
|
val |= LPI2C_MCFGR1_PINCFG(0x0); /* 2 pin open drain */
|
|
val |= LPI2C_MCFGR1_IGNACK(0x0); /* ignore nack */
|
|
writel(val, ®s->mcfgr1);
|
|
|
|
ret = bus_i2c_set_bus_speed(bus, speed);
|
|
|
|
/* enable lpi2c in master mode */
|
|
val = readl(®s->mcr) & ~LPI2C_MCR_MEN_MASK;
|
|
writel(val | LPI2C_MCR_MEN(1), ®s->mcr);
|
|
|
|
debug("i2c : controller bus %d, speed %d:\n", bus->seq, speed);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int imx_lpi2c_probe_chip(struct udevice *bus, u32 chip,
|
|
u32 chip_flags)
|
|
{
|
|
struct imx_lpi2c_reg *regs;
|
|
lpi2c_status_t result = LPI2C_SUCESS;
|
|
|
|
regs = (struct imx_lpi2c_reg *)devfdt_get_addr(bus);
|
|
result = bus_i2c_start(regs, chip, 0);
|
|
if (result) {
|
|
bus_i2c_stop(regs);
|
|
bus_i2c_init(bus, 100000);
|
|
return result;
|
|
}
|
|
|
|
result = bus_i2c_stop(regs);
|
|
if (result) {
|
|
bus_i2c_init(bus, 100000);
|
|
return -result;
|
|
}
|
|
|
|
return result;
|
|
}
|
|
|
|
static int imx_lpi2c_xfer(struct udevice *bus, struct i2c_msg *msg, int nmsgs)
|
|
{
|
|
struct imx_lpi2c_reg *regs;
|
|
int ret = 0;
|
|
|
|
regs = (struct imx_lpi2c_reg *)devfdt_get_addr(bus);
|
|
for (; nmsgs > 0; nmsgs--, msg++) {
|
|
debug("i2c_xfer: chip=0x%x, len=0x%x\n", msg->addr, msg->len);
|
|
if (msg->flags & I2C_M_RD)
|
|
ret = bus_i2c_read(regs, msg->addr, msg->buf, msg->len);
|
|
else {
|
|
ret = bus_i2c_write(regs, msg->addr, msg->buf,
|
|
msg->len);
|
|
if (ret)
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (ret)
|
|
debug("i2c_write: error sending\n");
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int imx_lpi2c_set_bus_speed(struct udevice *bus, unsigned int speed)
|
|
{
|
|
return bus_i2c_set_bus_speed(bus, speed);
|
|
}
|
|
|
|
static int imx_lpi2c_probe(struct udevice *bus)
|
|
{
|
|
struct imx_lpi2c_bus *i2c_bus = dev_get_priv(bus);
|
|
fdt_addr_t addr;
|
|
int ret;
|
|
|
|
i2c_bus->driver_data = dev_get_driver_data(bus);
|
|
|
|
addr = devfdt_get_addr(bus);
|
|
if (addr == FDT_ADDR_T_NONE)
|
|
return -ENODEV;
|
|
|
|
i2c_bus->base = addr;
|
|
i2c_bus->index = bus->seq;
|
|
i2c_bus->bus = bus;
|
|
|
|
/* power up i2c resource */
|
|
ret = init_i2c_power(bus->seq + 4);
|
|
if (ret) {
|
|
debug("init_i2c_power err = %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
/* Enable clk, only i2c4-7 can be handled by A7 core */
|
|
ret = enable_i2c_clk(1, bus->seq + 4);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = bus_i2c_init(bus, 100000);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
debug("i2c : controller bus %d at %lu , speed %d: ",
|
|
bus->seq, i2c_bus->base,
|
|
i2c_bus->speed);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dm_i2c_ops imx_lpi2c_ops = {
|
|
.xfer = imx_lpi2c_xfer,
|
|
.probe_chip = imx_lpi2c_probe_chip,
|
|
.set_bus_speed = imx_lpi2c_set_bus_speed,
|
|
};
|
|
|
|
static const struct udevice_id imx_lpi2c_ids[] = {
|
|
{ .compatible = "fsl,imx7ulp-lpi2c", },
|
|
{}
|
|
};
|
|
|
|
U_BOOT_DRIVER(imx_lpi2c) = {
|
|
.name = "imx_lpi2c",
|
|
.id = UCLASS_I2C,
|
|
.of_match = imx_lpi2c_ids,
|
|
.probe = imx_lpi2c_probe,
|
|
.priv_auto_alloc_size = sizeof(struct imx_lpi2c_bus),
|
|
.ops = &imx_lpi2c_ops,
|
|
};
|