mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-21 01:18:52 +09:00
![Bin Meng](/assets/img/avatar_default.png)
Add a RTC node in the device tree to enable DM RTC support. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> (Squashed in 'x86: Fix RTC build error on ivybridge')
853 lines
23 KiB
C
853 lines
23 KiB
C
/*
|
|
* Copyright (c) 2011 The Chromium OS Authors.
|
|
* (C) Copyright 2010,2011
|
|
* Graeme Russ, <graeme.russ@gmail.com>
|
|
*
|
|
* Portions from Coreboot mainboard/google/link/romstage.c
|
|
* Copyright (C) 2007-2010 coresystems GmbH
|
|
* Copyright (C) 2011 Google Inc.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <errno.h>
|
|
#include <fdtdec.h>
|
|
#include <malloc.h>
|
|
#include <net.h>
|
|
#include <rtc.h>
|
|
#include <spi.h>
|
|
#include <spi_flash.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/global_data.h>
|
|
#include <asm/mtrr.h>
|
|
#include <asm/pci.h>
|
|
#include <asm/arch/me.h>
|
|
#include <asm/arch/mrccache.h>
|
|
#include <asm/arch/pei_data.h>
|
|
#include <asm/arch/pch.h>
|
|
#include <asm/post.h>
|
|
#include <asm/arch/sandybridge.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#define CMOS_OFFSET_MRC_SEED 152
|
|
#define CMOS_OFFSET_MRC_SEED_S3 156
|
|
#define CMOS_OFFSET_MRC_SEED_CHK 160
|
|
|
|
/*
|
|
* This function looks for the highest region of memory lower than 4GB which
|
|
* has enough space for U-Boot where U-Boot is aligned on a page boundary.
|
|
* It overrides the default implementation found elsewhere which simply
|
|
* picks the end of ram, wherever that may be. The location of the stack,
|
|
* the relocation address, and how far U-Boot is moved by relocation are
|
|
* set in the global data structure.
|
|
*/
|
|
ulong board_get_usable_ram_top(ulong total_size)
|
|
{
|
|
struct memory_info *info = &gd->arch.meminfo;
|
|
uintptr_t dest_addr = 0;
|
|
struct memory_area *largest = NULL;
|
|
int i;
|
|
|
|
/* Find largest area of memory below 4GB */
|
|
|
|
for (i = 0; i < info->num_areas; i++) {
|
|
struct memory_area *area = &info->area[i];
|
|
|
|
if (area->start >= 1ULL << 32)
|
|
continue;
|
|
if (!largest || area->size > largest->size)
|
|
largest = area;
|
|
}
|
|
|
|
/* If no suitable area was found, return an error. */
|
|
assert(largest);
|
|
if (!largest || largest->size < (2 << 20))
|
|
panic("No available memory found for relocation");
|
|
|
|
dest_addr = largest->start + largest->size;
|
|
|
|
return (ulong)dest_addr;
|
|
}
|
|
|
|
void dram_init_banksize(void)
|
|
{
|
|
struct memory_info *info = &gd->arch.meminfo;
|
|
int num_banks;
|
|
int i;
|
|
|
|
for (i = 0, num_banks = 0; i < info->num_areas; i++) {
|
|
struct memory_area *area = &info->area[i];
|
|
|
|
if (area->start >= 1ULL << 32)
|
|
continue;
|
|
gd->bd->bi_dram[num_banks].start = area->start;
|
|
gd->bd->bi_dram[num_banks].size = area->size;
|
|
num_banks++;
|
|
}
|
|
}
|
|
|
|
static int get_mrc_entry(struct udevice **devp, struct fmap_entry *entry)
|
|
{
|
|
const void *blob = gd->fdt_blob;
|
|
int node, spi_node, mrc_node;
|
|
int upto;
|
|
int ret;
|
|
|
|
/* Find the flash chip within the SPI controller node */
|
|
upto = 0;
|
|
spi_node = fdtdec_next_alias(blob, "spi", COMPAT_INTEL_ICH_SPI, &upto);
|
|
if (spi_node < 0)
|
|
return -ENOENT;
|
|
node = fdt_first_subnode(blob, spi_node);
|
|
if (node < 0)
|
|
return -ECHILD;
|
|
|
|
/* Find the place where we put the MRC cache */
|
|
mrc_node = fdt_subnode_offset(blob, node, "rw-mrc-cache");
|
|
if (mrc_node < 0)
|
|
return -EPERM;
|
|
|
|
if (fdtdec_read_fmap_entry(blob, mrc_node, "rm-mrc-cache", entry))
|
|
return -EINVAL;
|
|
|
|
if (devp) {
|
|
debug("getting sf\n");
|
|
ret = uclass_get_device_by_of_offset(UCLASS_SPI_FLASH, node,
|
|
devp);
|
|
debug("ret = %d\n", ret);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int read_seed_from_cmos(struct pei_data *pei_data)
|
|
{
|
|
u16 c1, c2, checksum, seed_checksum;
|
|
struct udevice *dev;
|
|
int rcode = 0;
|
|
|
|
rcode = uclass_get_device(UCLASS_RTC, 0, &dev);
|
|
if (rcode) {
|
|
debug("Cannot find RTC: err=%d\n", rcode);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/*
|
|
* Read scrambler seeds from CMOS RAM. We don't want to store them in
|
|
* SPI flash since they change on every boot and that would wear down
|
|
* the flash too much. So we store these in CMOS and the large MRC
|
|
* data in SPI flash.
|
|
*/
|
|
rtc_read32(dev, CMOS_OFFSET_MRC_SEED, &pei_data->scrambler_seed);
|
|
debug("Read scrambler seed 0x%08x from CMOS 0x%02x\n",
|
|
pei_data->scrambler_seed, CMOS_OFFSET_MRC_SEED);
|
|
|
|
rtc_read32(dev, CMOS_OFFSET_MRC_SEED_S3, &pei_data->scrambler_seed_s3);
|
|
debug("Read S3 scrambler seed 0x%08x from CMOS 0x%02x\n",
|
|
pei_data->scrambler_seed_s3, CMOS_OFFSET_MRC_SEED_S3);
|
|
|
|
/* Compute seed checksum and compare */
|
|
c1 = compute_ip_checksum((u8 *)&pei_data->scrambler_seed,
|
|
sizeof(u32));
|
|
c2 = compute_ip_checksum((u8 *)&pei_data->scrambler_seed_s3,
|
|
sizeof(u32));
|
|
checksum = add_ip_checksums(sizeof(u32), c1, c2);
|
|
|
|
seed_checksum = rtc_read8(dev, CMOS_OFFSET_MRC_SEED_CHK);
|
|
seed_checksum |= rtc_read8(dev, CMOS_OFFSET_MRC_SEED_CHK + 1) << 8;
|
|
|
|
if (checksum != seed_checksum) {
|
|
debug("%s: invalid seed checksum\n", __func__);
|
|
pei_data->scrambler_seed = 0;
|
|
pei_data->scrambler_seed_s3 = 0;
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int prepare_mrc_cache(struct pei_data *pei_data)
|
|
{
|
|
struct mrc_data_container *mrc_cache;
|
|
struct fmap_entry entry;
|
|
int ret;
|
|
|
|
ret = read_seed_from_cmos(pei_data);
|
|
if (ret)
|
|
return ret;
|
|
ret = get_mrc_entry(NULL, &entry);
|
|
if (ret)
|
|
return ret;
|
|
mrc_cache = mrccache_find_current(&entry);
|
|
if (!mrc_cache)
|
|
return -ENOENT;
|
|
|
|
/*
|
|
* TODO(sjg@chromium.org): Skip this for now as it causes boot
|
|
* problems
|
|
*/
|
|
if (0) {
|
|
pei_data->mrc_input = mrc_cache->data;
|
|
pei_data->mrc_input_len = mrc_cache->data_size;
|
|
}
|
|
debug("%s: at %p, size %x checksum %04x\n", __func__,
|
|
pei_data->mrc_input, pei_data->mrc_input_len,
|
|
mrc_cache->checksum);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int build_mrc_data(struct mrc_data_container **datap)
|
|
{
|
|
struct mrc_data_container *data;
|
|
int orig_len;
|
|
int output_len;
|
|
|
|
orig_len = gd->arch.mrc_output_len;
|
|
output_len = ALIGN(orig_len, 16);
|
|
data = malloc(output_len + sizeof(*data));
|
|
if (!data)
|
|
return -ENOMEM;
|
|
data->signature = MRC_DATA_SIGNATURE;
|
|
data->data_size = output_len;
|
|
data->reserved = 0;
|
|
memcpy(data->data, gd->arch.mrc_output, orig_len);
|
|
|
|
/* Zero the unused space in aligned buffer. */
|
|
if (output_len > orig_len)
|
|
memset(data->data + orig_len, 0, output_len - orig_len);
|
|
|
|
data->checksum = compute_ip_checksum(data->data, output_len);
|
|
*datap = data;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int write_seeds_to_cmos(struct pei_data *pei_data)
|
|
{
|
|
u16 c1, c2, checksum;
|
|
struct udevice *dev;
|
|
int rcode = 0;
|
|
|
|
rcode = uclass_get_device(UCLASS_RTC, 0, &dev);
|
|
if (rcode) {
|
|
debug("Cannot find RTC: err=%d\n", rcode);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* Save the MRC seed values to CMOS */
|
|
rtc_write32(dev, CMOS_OFFSET_MRC_SEED, pei_data->scrambler_seed);
|
|
debug("Save scrambler seed 0x%08x to CMOS 0x%02x\n",
|
|
pei_data->scrambler_seed, CMOS_OFFSET_MRC_SEED);
|
|
|
|
rtc_write32(dev, CMOS_OFFSET_MRC_SEED_S3, pei_data->scrambler_seed_s3);
|
|
debug("Save s3 scrambler seed 0x%08x to CMOS 0x%02x\n",
|
|
pei_data->scrambler_seed_s3, CMOS_OFFSET_MRC_SEED_S3);
|
|
|
|
/* Save a simple checksum of the seed values */
|
|
c1 = compute_ip_checksum((u8 *)&pei_data->scrambler_seed,
|
|
sizeof(u32));
|
|
c2 = compute_ip_checksum((u8 *)&pei_data->scrambler_seed_s3,
|
|
sizeof(u32));
|
|
checksum = add_ip_checksums(sizeof(u32), c1, c2);
|
|
|
|
rtc_write8(dev, CMOS_OFFSET_MRC_SEED_CHK, checksum & 0xff);
|
|
rtc_write8(dev, CMOS_OFFSET_MRC_SEED_CHK + 1, (checksum >> 8) & 0xff);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sdram_save_mrc_data(void)
|
|
{
|
|
struct mrc_data_container *data;
|
|
struct fmap_entry entry;
|
|
struct udevice *sf;
|
|
int ret;
|
|
|
|
if (!gd->arch.mrc_output_len)
|
|
return 0;
|
|
debug("Saving %d bytes of MRC output data to SPI flash\n",
|
|
gd->arch.mrc_output_len);
|
|
|
|
ret = get_mrc_entry(&sf, &entry);
|
|
if (ret)
|
|
goto err_entry;
|
|
ret = build_mrc_data(&data);
|
|
if (ret)
|
|
goto err_data;
|
|
ret = mrccache_update(sf, &entry, data);
|
|
if (!ret)
|
|
debug("Saved MRC data with checksum %04x\n", data->checksum);
|
|
|
|
free(data);
|
|
err_data:
|
|
err_entry:
|
|
if (ret)
|
|
debug("%s: Failed: %d\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
/* Use this hook to save our SDRAM parameters */
|
|
int misc_init_r(void)
|
|
{
|
|
int ret;
|
|
|
|
ret = sdram_save_mrc_data();
|
|
if (ret)
|
|
printf("Unable to save MRC data: %d\n", ret);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const char *const ecc_decoder[] = {
|
|
"inactive",
|
|
"active on IO",
|
|
"disabled on IO",
|
|
"active"
|
|
};
|
|
|
|
/*
|
|
* Dump in the log memory controller configuration as read from the memory
|
|
* controller registers.
|
|
*/
|
|
static void report_memory_config(void)
|
|
{
|
|
u32 addr_decoder_common, addr_decode_ch[2];
|
|
int i;
|
|
|
|
addr_decoder_common = readl(MCHBAR_REG(0x5000));
|
|
addr_decode_ch[0] = readl(MCHBAR_REG(0x5004));
|
|
addr_decode_ch[1] = readl(MCHBAR_REG(0x5008));
|
|
|
|
debug("memcfg DDR3 clock %d MHz\n",
|
|
(readl(MCHBAR_REG(0x5e04)) * 13333 * 2 + 50) / 100);
|
|
debug("memcfg channel assignment: A: %d, B % d, C % d\n",
|
|
addr_decoder_common & 3,
|
|
(addr_decoder_common >> 2) & 3,
|
|
(addr_decoder_common >> 4) & 3);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(addr_decode_ch); i++) {
|
|
u32 ch_conf = addr_decode_ch[i];
|
|
debug("memcfg channel[%d] config (%8.8x):\n", i, ch_conf);
|
|
debug(" ECC %s\n", ecc_decoder[(ch_conf >> 24) & 3]);
|
|
debug(" enhanced interleave mode %s\n",
|
|
((ch_conf >> 22) & 1) ? "on" : "off");
|
|
debug(" rank interleave %s\n",
|
|
((ch_conf >> 21) & 1) ? "on" : "off");
|
|
debug(" DIMMA %d MB width x%d %s rank%s\n",
|
|
((ch_conf >> 0) & 0xff) * 256,
|
|
((ch_conf >> 19) & 1) ? 16 : 8,
|
|
((ch_conf >> 17) & 1) ? "dual" : "single",
|
|
((ch_conf >> 16) & 1) ? "" : ", selected");
|
|
debug(" DIMMB %d MB width x%d %s rank%s\n",
|
|
((ch_conf >> 8) & 0xff) * 256,
|
|
((ch_conf >> 20) & 1) ? 16 : 8,
|
|
((ch_conf >> 18) & 1) ? "dual" : "single",
|
|
((ch_conf >> 16) & 1) ? ", selected" : "");
|
|
}
|
|
}
|
|
|
|
static void post_system_agent_init(struct pei_data *pei_data)
|
|
{
|
|
/* If PCIe init is skipped, set the PEG clock gating */
|
|
if (!pei_data->pcie_init)
|
|
setbits_le32(MCHBAR_REG(0x7010), 1);
|
|
}
|
|
|
|
static asmlinkage void console_tx_byte(unsigned char byte)
|
|
{
|
|
#ifdef DEBUG
|
|
putc(byte);
|
|
#endif
|
|
}
|
|
|
|
static int recovery_mode_enabled(void)
|
|
{
|
|
return false;
|
|
}
|
|
|
|
/**
|
|
* Find the PEI executable in the ROM and execute it.
|
|
*
|
|
* @param pei_data: configuration data for UEFI PEI reference code
|
|
*/
|
|
int sdram_initialise(struct pei_data *pei_data)
|
|
{
|
|
unsigned version;
|
|
const char *data;
|
|
uint16_t done;
|
|
int ret;
|
|
|
|
report_platform_info();
|
|
|
|
/* Wait for ME to be ready */
|
|
ret = intel_early_me_init();
|
|
if (ret)
|
|
return ret;
|
|
ret = intel_early_me_uma_size();
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
debug("Starting UEFI PEI System Agent\n");
|
|
|
|
/*
|
|
* Do not pass MRC data in for recovery mode boot,
|
|
* Always pass it in for S3 resume.
|
|
*/
|
|
if (!recovery_mode_enabled() ||
|
|
pei_data->boot_mode == PEI_BOOT_RESUME) {
|
|
ret = prepare_mrc_cache(pei_data);
|
|
if (ret)
|
|
debug("prepare_mrc_cache failed: %d\n", ret);
|
|
}
|
|
|
|
/* If MRC data is not found we cannot continue S3 resume. */
|
|
if (pei_data->boot_mode == PEI_BOOT_RESUME && !pei_data->mrc_input) {
|
|
debug("Giving up in sdram_initialize: No MRC data\n");
|
|
reset_cpu(0);
|
|
}
|
|
|
|
/* Pass console handler in pei_data */
|
|
pei_data->tx_byte = console_tx_byte;
|
|
|
|
debug("PEI data at %p, size %x:\n", pei_data, sizeof(*pei_data));
|
|
|
|
data = (char *)CONFIG_X86_MRC_ADDR;
|
|
if (data) {
|
|
int rv;
|
|
int (*func)(struct pei_data *);
|
|
|
|
debug("Calling MRC at %p\n", data);
|
|
post_code(POST_PRE_MRC);
|
|
func = (int (*)(struct pei_data *))data;
|
|
rv = func(pei_data);
|
|
post_code(POST_MRC);
|
|
if (rv) {
|
|
switch (rv) {
|
|
case -1:
|
|
printf("PEI version mismatch.\n");
|
|
break;
|
|
case -2:
|
|
printf("Invalid memory frequency.\n");
|
|
break;
|
|
default:
|
|
printf("MRC returned %x.\n", rv);
|
|
}
|
|
printf("Nonzero MRC return value.\n");
|
|
return -EFAULT;
|
|
}
|
|
} else {
|
|
printf("UEFI PEI System Agent not found.\n");
|
|
return -ENOSYS;
|
|
}
|
|
|
|
#if CONFIG_USBDEBUG
|
|
/* mrc.bin reconfigures USB, so reinit it to have debug */
|
|
early_usbdebug_init();
|
|
#endif
|
|
|
|
version = readl(MCHBAR_REG(0x5034));
|
|
debug("System Agent Version %d.%d.%d Build %d\n",
|
|
version >> 24 , (version >> 16) & 0xff,
|
|
(version >> 8) & 0xff, version & 0xff);
|
|
debug("MCR output data length %#x at %p\n", pei_data->mrc_output_len,
|
|
pei_data->mrc_output);
|
|
|
|
/*
|
|
* Send ME init done for SandyBridge here. This is done inside the
|
|
* SystemAgent binary on IvyBridge
|
|
*/
|
|
done = x86_pci_read_config32(PCH_DEV, PCI_DEVICE_ID);
|
|
done &= BASE_REV_MASK;
|
|
if (BASE_REV_SNB == done)
|
|
intel_early_me_init_done(ME_INIT_STATUS_SUCCESS);
|
|
else
|
|
intel_early_me_status();
|
|
|
|
post_system_agent_init(pei_data);
|
|
report_memory_config();
|
|
|
|
/* S3 resume: don't save scrambler seed or MRC data */
|
|
if (pei_data->boot_mode != PEI_BOOT_RESUME) {
|
|
/*
|
|
* This will be copied to SDRAM in reserve_arch(), then written
|
|
* to SPI flash in sdram_save_mrc_data()
|
|
*/
|
|
gd->arch.mrc_output = (char *)pei_data->mrc_output;
|
|
gd->arch.mrc_output_len = pei_data->mrc_output_len;
|
|
ret = write_seeds_to_cmos(pei_data);
|
|
if (ret)
|
|
debug("Failed to write seeds to CMOS: %d\n", ret);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int reserve_arch(void)
|
|
{
|
|
u16 checksum;
|
|
|
|
checksum = compute_ip_checksum(gd->arch.mrc_output,
|
|
gd->arch.mrc_output_len);
|
|
debug("Saving %d bytes for MRC output data, checksum %04x\n",
|
|
gd->arch.mrc_output_len, checksum);
|
|
gd->start_addr_sp -= gd->arch.mrc_output_len;
|
|
memcpy((void *)gd->start_addr_sp, gd->arch.mrc_output,
|
|
gd->arch.mrc_output_len);
|
|
gd->arch.mrc_output = (char *)gd->start_addr_sp;
|
|
gd->start_addr_sp &= ~0xf;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int copy_spd(struct pei_data *peid)
|
|
{
|
|
const int gpio_vector[] = {41, 42, 43, 10, -1};
|
|
int spd_index;
|
|
const void *blob = gd->fdt_blob;
|
|
int node, spd_node;
|
|
int ret, i;
|
|
|
|
for (i = 0; ; i++) {
|
|
if (gpio_vector[i] == -1)
|
|
break;
|
|
ret = gpio_requestf(gpio_vector[i], "spd_id%d", i);
|
|
if (ret) {
|
|
debug("%s: Could not request gpio %d\n", __func__,
|
|
gpio_vector[i]);
|
|
return ret;
|
|
}
|
|
}
|
|
spd_index = gpio_get_values_as_int(gpio_vector);
|
|
debug("spd index %d\n", spd_index);
|
|
node = fdtdec_next_compatible(blob, 0, COMPAT_MEMORY_SPD);
|
|
if (node < 0) {
|
|
printf("SPD data not found.\n");
|
|
return -ENOENT;
|
|
}
|
|
|
|
for (spd_node = fdt_first_subnode(blob, node);
|
|
spd_node > 0;
|
|
spd_node = fdt_next_subnode(blob, spd_node)) {
|
|
const char *data;
|
|
int len;
|
|
|
|
if (fdtdec_get_int(blob, spd_node, "reg", -1) != spd_index)
|
|
continue;
|
|
data = fdt_getprop(blob, spd_node, "data", &len);
|
|
if (len < sizeof(peid->spd_data[0])) {
|
|
printf("Missing SPD data\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
debug("Using SDRAM SPD data for '%s'\n",
|
|
fdt_get_name(blob, spd_node, NULL));
|
|
memcpy(peid->spd_data[0], data, sizeof(peid->spd_data[0]));
|
|
break;
|
|
}
|
|
|
|
if (spd_node < 0) {
|
|
printf("No SPD data found for index %d\n", spd_index);
|
|
return -ENOENT;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* add_memory_area() - Add a new usable memory area to our list
|
|
*
|
|
* Note: @start and @end must not span the first 4GB boundary
|
|
*
|
|
* @info: Place to store memory info
|
|
* @start: Start of this memory area
|
|
* @end: End of this memory area + 1
|
|
*/
|
|
static int add_memory_area(struct memory_info *info,
|
|
uint64_t start, uint64_t end)
|
|
{
|
|
struct memory_area *ptr;
|
|
|
|
if (info->num_areas == CONFIG_NR_DRAM_BANKS)
|
|
return -ENOSPC;
|
|
|
|
ptr = &info->area[info->num_areas];
|
|
ptr->start = start;
|
|
ptr->size = end - start;
|
|
info->total_memory += ptr->size;
|
|
if (ptr->start < (1ULL << 32))
|
|
info->total_32bit_memory += ptr->size;
|
|
debug("%d: memory %llx size %llx, total now %llx / %llx\n",
|
|
info->num_areas, ptr->start, ptr->size,
|
|
info->total_32bit_memory, info->total_memory);
|
|
info->num_areas++;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* sdram_find() - Find available memory
|
|
*
|
|
* This is a bit complicated since on x86 there are system memory holes all
|
|
* over the place. We create a list of available memory blocks
|
|
*/
|
|
static int sdram_find(pci_dev_t dev)
|
|
{
|
|
struct memory_info *info = &gd->arch.meminfo;
|
|
uint32_t tseg_base, uma_size, tolud;
|
|
uint64_t tom, me_base, touud;
|
|
uint64_t uma_memory_base = 0;
|
|
uint64_t uma_memory_size;
|
|
unsigned long long tomk;
|
|
uint16_t ggc;
|
|
|
|
/* Total Memory 2GB example:
|
|
*
|
|
* 00000000 0000MB-1992MB 1992MB RAM (writeback)
|
|
* 7c800000 1992MB-2000MB 8MB TSEG (SMRR)
|
|
* 7d000000 2000MB-2002MB 2MB GFX GTT (uncached)
|
|
* 7d200000 2002MB-2034MB 32MB GFX UMA (uncached)
|
|
* 7f200000 2034MB TOLUD
|
|
* 7f800000 2040MB MEBASE
|
|
* 7f800000 2040MB-2048MB 8MB ME UMA (uncached)
|
|
* 80000000 2048MB TOM
|
|
* 100000000 4096MB-4102MB 6MB RAM (writeback)
|
|
*
|
|
* Total Memory 4GB example:
|
|
*
|
|
* 00000000 0000MB-2768MB 2768MB RAM (writeback)
|
|
* ad000000 2768MB-2776MB 8MB TSEG (SMRR)
|
|
* ad800000 2776MB-2778MB 2MB GFX GTT (uncached)
|
|
* ada00000 2778MB-2810MB 32MB GFX UMA (uncached)
|
|
* afa00000 2810MB TOLUD
|
|
* ff800000 4088MB MEBASE
|
|
* ff800000 4088MB-4096MB 8MB ME UMA (uncached)
|
|
* 100000000 4096MB TOM
|
|
* 100000000 4096MB-5374MB 1278MB RAM (writeback)
|
|
* 14fe00000 5368MB TOUUD
|
|
*/
|
|
|
|
/* Top of Upper Usable DRAM, including remap */
|
|
touud = x86_pci_read_config32(dev, TOUUD+4);
|
|
touud <<= 32;
|
|
touud |= x86_pci_read_config32(dev, TOUUD);
|
|
|
|
/* Top of Lower Usable DRAM */
|
|
tolud = x86_pci_read_config32(dev, TOLUD);
|
|
|
|
/* Top of Memory - does not account for any UMA */
|
|
tom = x86_pci_read_config32(dev, 0xa4);
|
|
tom <<= 32;
|
|
tom |= x86_pci_read_config32(dev, 0xa0);
|
|
|
|
debug("TOUUD %llx TOLUD %08x TOM %llx\n", touud, tolud, tom);
|
|
|
|
/* ME UMA needs excluding if total memory <4GB */
|
|
me_base = x86_pci_read_config32(dev, 0x74);
|
|
me_base <<= 32;
|
|
me_base |= x86_pci_read_config32(dev, 0x70);
|
|
|
|
debug("MEBASE %llx\n", me_base);
|
|
|
|
/* TODO: Get rid of all this shifting by 10 bits */
|
|
tomk = tolud >> 10;
|
|
if (me_base == tolud) {
|
|
/* ME is from MEBASE-TOM */
|
|
uma_size = (tom - me_base) >> 10;
|
|
/* Increment TOLUD to account for ME as RAM */
|
|
tolud += uma_size << 10;
|
|
/* UMA starts at old TOLUD */
|
|
uma_memory_base = tomk * 1024ULL;
|
|
uma_memory_size = uma_size * 1024ULL;
|
|
debug("ME UMA base %llx size %uM\n", me_base, uma_size >> 10);
|
|
}
|
|
|
|
/* Graphics memory comes next */
|
|
ggc = x86_pci_read_config16(dev, GGC);
|
|
if (!(ggc & 2)) {
|
|
debug("IGD decoded, subtracting ");
|
|
|
|
/* Graphics memory */
|
|
uma_size = ((ggc >> 3) & 0x1f) * 32 * 1024ULL;
|
|
debug("%uM UMA", uma_size >> 10);
|
|
tomk -= uma_size;
|
|
uma_memory_base = tomk * 1024ULL;
|
|
uma_memory_size += uma_size * 1024ULL;
|
|
|
|
/* GTT Graphics Stolen Memory Size (GGMS) */
|
|
uma_size = ((ggc >> 8) & 0x3) * 1024ULL;
|
|
tomk -= uma_size;
|
|
uma_memory_base = tomk * 1024ULL;
|
|
uma_memory_size += uma_size * 1024ULL;
|
|
debug(" and %uM GTT\n", uma_size >> 10);
|
|
}
|
|
|
|
/* Calculate TSEG size from its base which must be below GTT */
|
|
tseg_base = x86_pci_read_config32(dev, 0xb8);
|
|
uma_size = (uma_memory_base - tseg_base) >> 10;
|
|
tomk -= uma_size;
|
|
uma_memory_base = tomk * 1024ULL;
|
|
uma_memory_size += uma_size * 1024ULL;
|
|
debug("TSEG base 0x%08x size %uM\n", tseg_base, uma_size >> 10);
|
|
|
|
debug("Available memory below 4GB: %lluM\n", tomk >> 10);
|
|
|
|
/* Report the memory regions */
|
|
add_memory_area(info, 1 << 20, 2 << 28);
|
|
add_memory_area(info, (2 << 28) + (2 << 20), 4 << 28);
|
|
add_memory_area(info, (4 << 28) + (2 << 20), tseg_base);
|
|
add_memory_area(info, 1ULL << 32, touud);
|
|
|
|
/* Add MTRRs for memory */
|
|
mtrr_add_request(MTRR_TYPE_WRBACK, 0, 2ULL << 30);
|
|
mtrr_add_request(MTRR_TYPE_WRBACK, 2ULL << 30, 512 << 20);
|
|
mtrr_add_request(MTRR_TYPE_WRBACK, 0xaULL << 28, 256 << 20);
|
|
mtrr_add_request(MTRR_TYPE_UNCACHEABLE, tseg_base, 16 << 20);
|
|
mtrr_add_request(MTRR_TYPE_UNCACHEABLE, tseg_base + (16 << 20),
|
|
32 << 20);
|
|
|
|
/*
|
|
* If >= 4GB installed then memory from TOLUD to 4GB
|
|
* is remapped above TOM, TOUUD will account for both
|
|
*/
|
|
if (touud > (1ULL << 32ULL)) {
|
|
debug("Available memory above 4GB: %lluM\n",
|
|
(touud >> 20) - 4096);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void rcba_config(void)
|
|
{
|
|
/*
|
|
* GFX INTA -> PIRQA (MSI)
|
|
* D28IP_P3IP WLAN INTA -> PIRQB
|
|
* D29IP_E1P EHCI1 INTA -> PIRQD
|
|
* D26IP_E2P EHCI2 INTA -> PIRQF
|
|
* D31IP_SIP SATA INTA -> PIRQF (MSI)
|
|
* D31IP_SMIP SMBUS INTB -> PIRQH
|
|
* D31IP_TTIP THRT INTC -> PIRQA
|
|
* D27IP_ZIP HDA INTA -> PIRQA (MSI)
|
|
*
|
|
* TRACKPAD -> PIRQE (Edge Triggered)
|
|
* TOUCHSCREEN -> PIRQG (Edge Triggered)
|
|
*/
|
|
|
|
/* Device interrupt pin register (board specific) */
|
|
writel((INTC << D31IP_TTIP) | (NOINT << D31IP_SIP2) |
|
|
(INTB << D31IP_SMIP) | (INTA << D31IP_SIP), RCB_REG(D31IP));
|
|
writel(NOINT << D30IP_PIP, RCB_REG(D30IP));
|
|
writel(INTA << D29IP_E1P, RCB_REG(D29IP));
|
|
writel(INTA << D28IP_P3IP, RCB_REG(D28IP));
|
|
writel(INTA << D27IP_ZIP, RCB_REG(D27IP));
|
|
writel(INTA << D26IP_E2P, RCB_REG(D26IP));
|
|
writel(NOINT << D25IP_LIP, RCB_REG(D25IP));
|
|
writel(NOINT << D22IP_MEI1IP, RCB_REG(D22IP));
|
|
|
|
/* Device interrupt route registers */
|
|
writel(DIR_ROUTE(PIRQB, PIRQH, PIRQA, PIRQC), RCB_REG(D31IR));
|
|
writel(DIR_ROUTE(PIRQD, PIRQE, PIRQF, PIRQG), RCB_REG(D29IR));
|
|
writel(DIR_ROUTE(PIRQB, PIRQC, PIRQD, PIRQE), RCB_REG(D28IR));
|
|
writel(DIR_ROUTE(PIRQA, PIRQH, PIRQA, PIRQB), RCB_REG(D27IR));
|
|
writel(DIR_ROUTE(PIRQF, PIRQE, PIRQG, PIRQH), RCB_REG(D26IR));
|
|
writel(DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD), RCB_REG(D25IR));
|
|
writel(DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD), RCB_REG(D22IR));
|
|
|
|
/* Enable IOAPIC (generic) */
|
|
writew(0x0100, RCB_REG(OIC));
|
|
/* PCH BWG says to read back the IOAPIC enable register */
|
|
(void)readw(RCB_REG(OIC));
|
|
|
|
/* Disable unused devices (board specific) */
|
|
setbits_le32(RCB_REG(FD), PCH_DISABLE_ALWAYS);
|
|
}
|
|
|
|
int dram_init(void)
|
|
{
|
|
struct pei_data pei_data __aligned(8) = {
|
|
.pei_version = PEI_VERSION,
|
|
.mchbar = DEFAULT_MCHBAR,
|
|
.dmibar = DEFAULT_DMIBAR,
|
|
.epbar = DEFAULT_EPBAR,
|
|
.pciexbar = CONFIG_PCIE_ECAM_BASE,
|
|
.smbusbar = SMBUS_IO_BASE,
|
|
.wdbbar = 0x4000000,
|
|
.wdbsize = 0x1000,
|
|
.hpet_address = CONFIG_HPET_ADDRESS,
|
|
.rcba = DEFAULT_RCBABASE,
|
|
.pmbase = DEFAULT_PMBASE,
|
|
.gpiobase = DEFAULT_GPIOBASE,
|
|
.thermalbase = 0xfed08000,
|
|
.system_type = 0, /* 0 Mobile, 1 Desktop/Server */
|
|
.tseg_size = CONFIG_SMM_TSEG_SIZE,
|
|
.ts_addresses = { 0x00, 0x00, 0x00, 0x00 },
|
|
.ec_present = 1,
|
|
.ddr3lv_support = 1,
|
|
/*
|
|
* 0 = leave channel enabled
|
|
* 1 = disable dimm 0 on channel
|
|
* 2 = disable dimm 1 on channel
|
|
* 3 = disable dimm 0+1 on channel
|
|
*/
|
|
.dimm_channel0_disabled = 2,
|
|
.dimm_channel1_disabled = 2,
|
|
.max_ddr3_freq = 1600,
|
|
.usb_port_config = {
|
|
/*
|
|
* Empty and onboard Ports 0-7, set to un-used pin
|
|
* OC3
|
|
*/
|
|
{ 0, 3, 0x0000 }, /* P0= Empty */
|
|
{ 1, 0, 0x0040 }, /* P1= Left USB 1 (OC0) */
|
|
{ 1, 1, 0x0040 }, /* P2= Left USB 2 (OC1) */
|
|
{ 1, 3, 0x0040 }, /* P3= SDCARD (no OC) */
|
|
{ 0, 3, 0x0000 }, /* P4= Empty */
|
|
{ 1, 3, 0x0040 }, /* P5= WWAN (no OC) */
|
|
{ 0, 3, 0x0000 }, /* P6= Empty */
|
|
{ 0, 3, 0x0000 }, /* P7= Empty */
|
|
/*
|
|
* Empty and onboard Ports 8-13, set to un-used pin
|
|
* OC4
|
|
*/
|
|
{ 1, 4, 0x0040 }, /* P8= Camera (no OC) */
|
|
{ 1, 4, 0x0040 }, /* P9= Bluetooth (no OC) */
|
|
{ 0, 4, 0x0000 }, /* P10= Empty */
|
|
{ 0, 4, 0x0000 }, /* P11= Empty */
|
|
{ 0, 4, 0x0000 }, /* P12= Empty */
|
|
{ 0, 4, 0x0000 }, /* P13= Empty */
|
|
},
|
|
};
|
|
pci_dev_t dev = PCI_BDF(0, 0, 0);
|
|
int ret;
|
|
|
|
debug("Boot mode %d\n", gd->arch.pei_boot_mode);
|
|
debug("mcr_input %p\n", pei_data.mrc_input);
|
|
pei_data.boot_mode = gd->arch.pei_boot_mode;
|
|
ret = copy_spd(&pei_data);
|
|
if (!ret)
|
|
ret = sdram_initialise(&pei_data);
|
|
if (ret)
|
|
return ret;
|
|
|
|
rcba_config();
|
|
quick_ram_check();
|
|
|
|
writew(0xCAFE, MCHBAR_REG(SSKPD));
|
|
|
|
post_code(POST_DRAM);
|
|
|
|
ret = sdram_find(dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
gd->ram_size = gd->arch.meminfo.total_32bit_memory;
|
|
|
|
return 0;
|
|
}
|