u-boot-brain/arch/arm/include/asm/omap_gpmc.h
pekon gupta d016dc42ce mtd: nand: omap: enable BCH ECC scheme using ELM for generic platform
BCH8_ECC scheme implemented in omap_gpmc.c driver has following favours
+-----------------------------------+-----------------+-----------------+
|ECC Scheme                         | ECC Calculation | Error Detection |
+-----------------------------------+-----------------+-----------------+
|OMAP_ECC_BCH8_CODE_HW              |GPMC             |ELM H/W engine   |
|OMAP_ECC_BCH8_CODE_HW_DETECTION_SW |GPMC             |S/W BCH library  |
+-----------------------------------+-----------------+-----------------+

Current implementation limits the BCH8_CODE_HW only for AM33xx device family.
(using CONFIG_AM33XX). However, other SoC families (like TI81xx) also have
ELM hardware module, and can support ECC error detection using ELM.

This patch
- removes CONFIG_AM33xx
	Thus this driver can be reused by all devices having ELM h/w engine.
- adds omap_select_ecc_scheme()
	A common function to handle ecc-scheme related configurations. This
	can be used both during device-probe and via user-space u-boot commads
	to change ecc-scheme. During device probe ecc-scheme is selected based
	on CONFIG_NAND_OMAP_ELM or CONFIG_NAND_OMAP_BCH8
- enables CONFIG_BCH
	S/W library (lib/bch.c) required by OMAP_ECC_BCHx_CODE_HW_DETECTION_SW
  	is enabled by CONFIG_BCH.
- enables CONFIG_SYS_NAND_ONFI_DETECTION
	for auto-detection of ONFI compliant NAND devices
- updates following README doc
	doc/README.nand
	board/ti/am335x/README
	doc/README.omap3

Signed-off-by: Pekon Gupta <pekon@ti.com>
[scottwood@freescale.com: fixed unused variable warning]
Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-11-21 13:33:41 -06:00

88 lines
2.2 KiB
C

/*
* (C) Copyright 2004-2008 Texas Instruments, <www.ti.com>
* Rohit Choraria <rohitkc@ti.com>
*
* (C) Copyright 2013 Andreas Bießmann <andreas.devel@googlemail.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __ASM_OMAP_GPMC_H
#define __ASM_OMAP_GPMC_H
#include <asm/arch/omap_gpmc.h>
#define GPMC_BUF_EMPTY 0
#define GPMC_BUF_FULL 1
#define ECCCLEAR (0x1 << 8)
#define ECCRESULTREG1 (0x1 << 0)
#define ECCSIZE512BYTE 0xFF
#define ECCSIZE1 (ECCSIZE512BYTE << 22)
#define ECCSIZE0 (ECCSIZE512BYTE << 12)
#define ECCSIZE0SEL (0x000 << 0)
/* Generic ECC Layouts */
/* Large Page x8 NAND device Layout */
#ifdef GPMC_NAND_ECC_LP_x8_LAYOUT
#define GPMC_NAND_HW_ECC_LAYOUT {\
.eccbytes = 12,\
.eccpos = {1, 2, 3, 4, 5, 6, 7, 8,\
9, 10, 11, 12},\
.oobfree = {\
{.offset = 13,\
.length = 51 } } \
}
#endif
/* Large Page x16 NAND device Layout */
#ifdef GPMC_NAND_ECC_LP_x16_LAYOUT
#define GPMC_NAND_HW_ECC_LAYOUT {\
.eccbytes = 12,\
.eccpos = {2, 3, 4, 5, 6, 7, 8, 9,\
10, 11, 12, 13},\
.oobfree = {\
{.offset = 14,\
.length = 50 } } \
}
#endif
/* Small Page x8 NAND device Layout */
#ifdef GPMC_NAND_ECC_SP_x8_LAYOUT
#define GPMC_NAND_HW_ECC_LAYOUT {\
.eccbytes = 3,\
.eccpos = {1, 2, 3},\
.oobfree = {\
{.offset = 4,\
.length = 12 } } \
}
#endif
/* Small Page x16 NAND device Layout */
#ifdef GPMC_NAND_ECC_SP_x16_LAYOUT
#define GPMC_NAND_HW_ECC_LAYOUT {\
.eccbytes = 3,\
.eccpos = {2, 3, 4},\
.oobfree = {\
{.offset = 5,\
.length = 11 } } \
}
#endif
enum omap_ecc {
/* 1-bit ECC calculation by Software, Error detection by Software */
OMAP_ECC_HAM1_CODE_SW = 1, /* avoid un-initialized int can be 0x0 */
/* 1-bit ECC calculation by GPMC, Error detection by Software */
/* ECC layout compatible to legacy ROMCODE. */
OMAP_ECC_HAM1_CODE_HW,
/* 4-bit ECC calculation by GPMC, Error detection by Software */
OMAP_ECC_BCH4_CODE_HW_DETECTION_SW,
/* 4-bit ECC calculation by GPMC, Error detection by ELM */
OMAP_ECC_BCH4_CODE_HW,
/* 8-bit ECC calculation by GPMC, Error detection by Software */
OMAP_ECC_BCH8_CODE_HW_DETECTION_SW,
/* 8-bit ECC calculation by GPMC, Error detection by ELM */
OMAP_ECC_BCH8_CODE_HW,
};
#endif /* __ASM_OMAP_GPMC_H */