mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-07-07 11:46:17 +09:00
5b3da7fa12
Synchronize the Linux Device Tree for Amlogic Meson GX boards from Linux 4.17.0 This will enable USB on Amlogic Meson GXL Boards like Khadas VIM, P212 or LibreTech-CC. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
529 lines
13 KiB
Plaintext
529 lines
13 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Copyright (c) 2016 Andreas Färber
|
|
*
|
|
* Copyright (c) 2016 BayLibre, SAS.
|
|
* Author: Neil Armstrong <narmstrong@baylibre.com>
|
|
*
|
|
* Copyright (c) 2016 Endless Computers, Inc.
|
|
* Author: Carlo Caione <carlo@endlessm.com>
|
|
*/
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
|
|
/ {
|
|
interrupt-parent = <&gic>;
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
|
|
reserved-memory {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
/* 16 MiB reserved for Hardware ROM Firmware */
|
|
hwrom_reserved: hwrom@0 {
|
|
reg = <0x0 0x0 0x0 0x1000000>;
|
|
no-map;
|
|
};
|
|
|
|
/* 2 MiB reserved for ARM Trusted Firmware (BL31) */
|
|
secmon_reserved: secmon@10000000 {
|
|
reg = <0x0 0x10000000 0x0 0x200000>;
|
|
no-map;
|
|
};
|
|
|
|
linux,cma {
|
|
compatible = "shared-dma-pool";
|
|
reusable;
|
|
size = <0x0 0xbc00000>;
|
|
alignment = <0x0 0x400000>;
|
|
linux,cma-default;
|
|
};
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <0x2>;
|
|
#size-cells = <0x0>;
|
|
|
|
cpu0: cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a53", "arm,armv8";
|
|
reg = <0x0 0x0>;
|
|
enable-method = "psci";
|
|
next-level-cache = <&l2>;
|
|
clocks = <&scpi_dvfs 0>;
|
|
};
|
|
|
|
cpu1: cpu@1 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a53", "arm,armv8";
|
|
reg = <0x0 0x1>;
|
|
enable-method = "psci";
|
|
next-level-cache = <&l2>;
|
|
clocks = <&scpi_dvfs 0>;
|
|
};
|
|
|
|
cpu2: cpu@2 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a53", "arm,armv8";
|
|
reg = <0x0 0x2>;
|
|
enable-method = "psci";
|
|
next-level-cache = <&l2>;
|
|
clocks = <&scpi_dvfs 0>;
|
|
};
|
|
|
|
cpu3: cpu@3 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a53", "arm,armv8";
|
|
reg = <0x0 0x3>;
|
|
enable-method = "psci";
|
|
next-level-cache = <&l2>;
|
|
clocks = <&scpi_dvfs 0>;
|
|
};
|
|
|
|
l2: l2-cache0 {
|
|
compatible = "cache";
|
|
};
|
|
};
|
|
|
|
arm-pmu {
|
|
compatible = "arm,cortex-a53-pmu";
|
|
interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
|
|
};
|
|
|
|
psci {
|
|
compatible = "arm,psci-0.2";
|
|
method = "smc";
|
|
};
|
|
|
|
timer {
|
|
compatible = "arm,armv8-timer";
|
|
interrupts = <GIC_PPI 13
|
|
(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 14
|
|
(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 11
|
|
(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 10
|
|
(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>;
|
|
};
|
|
|
|
xtal: xtal-clk {
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <24000000>;
|
|
clock-output-names = "xtal";
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
firmware {
|
|
sm: secure-monitor {
|
|
compatible = "amlogic,meson-gx-sm", "amlogic,meson-gxbb-sm";
|
|
};
|
|
};
|
|
|
|
efuse: efuse {
|
|
compatible = "amlogic,meson-gx-efuse", "amlogic,meson-gxbb-efuse";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
read-only;
|
|
|
|
sn: sn@14 {
|
|
reg = <0x14 0x10>;
|
|
};
|
|
|
|
eth_mac: eth_mac@34 {
|
|
reg = <0x34 0x10>;
|
|
};
|
|
|
|
bid: bid@46 {
|
|
reg = <0x46 0x30>;
|
|
};
|
|
};
|
|
|
|
scpi {
|
|
compatible = "amlogic,meson-gxbb-scpi", "arm,scpi-pre-1.0";
|
|
mboxes = <&mailbox 1 &mailbox 2>;
|
|
shmem = <&cpu_scp_lpri &cpu_scp_hpri>;
|
|
|
|
scpi_clocks: clocks {
|
|
compatible = "arm,scpi-clocks";
|
|
|
|
scpi_dvfs: scpi_clocks@0 {
|
|
compatible = "arm,scpi-dvfs-clocks";
|
|
#clock-cells = <1>;
|
|
clock-indices = <0>;
|
|
clock-output-names = "vcpu";
|
|
};
|
|
};
|
|
|
|
scpi_sensors: sensors {
|
|
compatible = "amlogic,meson-gxbb-scpi-sensors", "arm,scpi-sensors";
|
|
#thermal-sensor-cells = <1>;
|
|
};
|
|
};
|
|
|
|
soc {
|
|
compatible = "simple-bus";
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
cbus: bus@c1100000 {
|
|
compatible = "simple-bus";
|
|
reg = <0x0 0xc1100000 0x0 0x100000>;
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges = <0x0 0x0 0x0 0xc1100000 0x0 0x100000>;
|
|
|
|
gpio_intc: interrupt-controller@9880 {
|
|
compatible = "amlogic,meson-gpio-intc";
|
|
reg = <0x0 0x9880 0x0 0x10>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
|
|
status = "disabled";
|
|
};
|
|
|
|
reset: reset-controller@4404 {
|
|
compatible = "amlogic,meson-gx-reset", "amlogic,meson-gxbb-reset";
|
|
reg = <0x0 0x04404 0x0 0x9c>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
uart_A: serial@84c0 {
|
|
compatible = "amlogic,meson-gx-uart";
|
|
reg = <0x0 0x84c0 0x0 0x18>;
|
|
interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart_B: serial@84dc {
|
|
compatible = "amlogic,meson-gx-uart";
|
|
reg = <0x0 0x84dc 0x0 0x18>;
|
|
interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c_A: i2c@8500 {
|
|
compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
|
|
reg = <0x0 0x08500 0x0 0x20>;
|
|
interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pwm_ab: pwm@8550 {
|
|
compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
|
|
reg = <0x0 0x08550 0x0 0x10>;
|
|
#pwm-cells = <3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pwm_cd: pwm@8650 {
|
|
compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
|
|
reg = <0x0 0x08650 0x0 0x10>;
|
|
#pwm-cells = <3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
saradc: adc@8680 {
|
|
compatible = "amlogic,meson-saradc";
|
|
reg = <0x0 0x8680 0x0 0x34>;
|
|
#io-channel-cells = <1>;
|
|
interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pwm_ef: pwm@86c0 {
|
|
compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm";
|
|
reg = <0x0 0x086c0 0x0 0x10>;
|
|
#pwm-cells = <3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart_C: serial@8700 {
|
|
compatible = "amlogic,meson-gx-uart";
|
|
reg = <0x0 0x8700 0x0 0x18>;
|
|
interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c_B: i2c@87c0 {
|
|
compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
|
|
reg = <0x0 0x087c0 0x0 0x20>;
|
|
interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c_C: i2c@87e0 {
|
|
compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
|
|
reg = <0x0 0x087e0 0x0 0x20>;
|
|
interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
spicc: spi@8d80 {
|
|
compatible = "amlogic,meson-gx-spicc";
|
|
reg = <0x0 0x08d80 0x0 0x80>;
|
|
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
spifc: spi@8c80 {
|
|
compatible = "amlogic,meson-gx-spifc", "amlogic,meson-gxbb-spifc";
|
|
reg = <0x0 0x08c80 0x0 0x80>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
watchdog@98d0 {
|
|
compatible = "amlogic,meson-gx-wdt", "amlogic,meson-gxbb-wdt";
|
|
reg = <0x0 0x098d0 0x0 0x10>;
|
|
clocks = <&xtal>;
|
|
};
|
|
};
|
|
|
|
gic: interrupt-controller@c4301000 {
|
|
compatible = "arm,gic-400";
|
|
reg = <0x0 0xc4301000 0 0x1000>,
|
|
<0x0 0xc4302000 0 0x2000>,
|
|
<0x0 0xc4304000 0 0x2000>,
|
|
<0x0 0xc4306000 0 0x2000>;
|
|
interrupt-controller;
|
|
interrupts = <GIC_PPI 9
|
|
(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
|
|
#interrupt-cells = <3>;
|
|
#address-cells = <0>;
|
|
};
|
|
|
|
sram: sram@c8000000 {
|
|
compatible = "amlogic,meson-gx-sram", "amlogic,meson-gxbb-sram", "mmio-sram";
|
|
reg = <0x0 0xc8000000 0x0 0x14000>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0x0 0xc8000000 0x14000>;
|
|
|
|
cpu_scp_lpri: scp-shmem@0 {
|
|
compatible = "amlogic,meson-gx-scp-shmem", "amlogic,meson-gxbb-scp-shmem";
|
|
reg = <0x13000 0x400>;
|
|
};
|
|
|
|
cpu_scp_hpri: scp-shmem@200 {
|
|
compatible = "amlogic,meson-gx-scp-shmem", "amlogic,meson-gxbb-scp-shmem";
|
|
reg = <0x13400 0x400>;
|
|
};
|
|
};
|
|
|
|
aobus: bus@c8100000 {
|
|
compatible = "simple-bus";
|
|
reg = <0x0 0xc8100000 0x0 0x100000>;
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>;
|
|
|
|
sysctrl_AO: sys-ctrl@0 {
|
|
compatible = "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd";
|
|
reg = <0x0 0x0 0x0 0x100>;
|
|
|
|
pwrc_vpu: power-controller-vpu {
|
|
compatible = "amlogic,meson-gx-pwrc-vpu";
|
|
#power-domain-cells = <0>;
|
|
amlogic,hhi-sysctrl = <&sysctrl>;
|
|
};
|
|
|
|
clkc_AO: clock-controller {
|
|
compatible = "amlogic,meson-gx-aoclkc";
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
};
|
|
};
|
|
|
|
cec_AO: cec@100 {
|
|
compatible = "amlogic,meson-gx-ao-cec";
|
|
reg = <0x0 0x00100 0x0 0x14>;
|
|
interrupts = <GIC_SPI 199 IRQ_TYPE_EDGE_RISING>;
|
|
};
|
|
|
|
sec_AO: ao-secure@140 {
|
|
compatible = "amlogic,meson-gx-ao-secure", "syscon";
|
|
reg = <0x0 0x140 0x0 0x140>;
|
|
amlogic,has-chip-id;
|
|
};
|
|
|
|
uart_AO: serial@4c0 {
|
|
compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
|
|
reg = <0x0 0x004c0 0x0 0x18>;
|
|
interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart_AO_B: serial@4e0 {
|
|
compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
|
|
reg = <0x0 0x004e0 0x0 0x18>;
|
|
interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c_AO: i2c@500 {
|
|
compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c";
|
|
reg = <0x0 0x500 0x0 0x20>;
|
|
interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pwm_AO_ab: pwm@550 {
|
|
compatible = "amlogic,meson-gx-ao-pwm", "amlogic,meson-gxbb-ao-pwm";
|
|
reg = <0x0 0x00550 0x0 0x10>;
|
|
#pwm-cells = <3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
ir: ir@580 {
|
|
compatible = "amlogic,meson-gx-ir", "amlogic,meson-gxbb-ir";
|
|
reg = <0x0 0x00580 0x0 0x40>;
|
|
interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
periphs: periphs@c8834000 {
|
|
compatible = "simple-bus";
|
|
reg = <0x0 0xc8834000 0x0 0x2000>;
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges = <0x0 0x0 0x0 0xc8834000 0x0 0x2000>;
|
|
|
|
hwrng: rng {
|
|
compatible = "amlogic,meson-rng";
|
|
reg = <0x0 0x0 0x0 0x4>;
|
|
};
|
|
};
|
|
|
|
hiubus: bus@c883c000 {
|
|
compatible = "simple-bus";
|
|
reg = <0x0 0xc883c000 0x0 0x2000>;
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges = <0x0 0x0 0x0 0xc883c000 0x0 0x2000>;
|
|
|
|
sysctrl: system-controller@0 {
|
|
compatible = "amlogic,meson-gx-hhi-sysctrl", "syscon", "simple-mfd";
|
|
reg = <0 0 0 0x400>;
|
|
};
|
|
|
|
mailbox: mailbox@404 {
|
|
compatible = "amlogic,meson-gx-mhu", "amlogic,meson-gxbb-mhu";
|
|
reg = <0 0x404 0 0x4c>;
|
|
interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 209 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 210 IRQ_TYPE_EDGE_RISING>;
|
|
#mbox-cells = <1>;
|
|
};
|
|
};
|
|
|
|
ethmac: ethernet@c9410000 {
|
|
compatible = "amlogic,meson-gx-dwmac", "amlogic,meson-gxbb-dwmac", "snps,dwmac";
|
|
reg = <0x0 0xc9410000 0x0 0x10000
|
|
0x0 0xc8834540 0x0 0x4>;
|
|
interrupts = <GIC_SPI 8 IRQ_TYPE_EDGE_RISING>;
|
|
interrupt-names = "macirq";
|
|
status = "disabled";
|
|
};
|
|
|
|
apb: apb@d0000000 {
|
|
compatible = "simple-bus";
|
|
reg = <0x0 0xd0000000 0x0 0x200000>;
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges = <0x0 0x0 0x0 0xd0000000 0x0 0x200000>;
|
|
|
|
sd_emmc_a: mmc@70000 {
|
|
compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
|
|
reg = <0x0 0x70000 0x0 0x2000>;
|
|
interrupts = <GIC_SPI 216 IRQ_TYPE_EDGE_RISING>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sd_emmc_b: mmc@72000 {
|
|
compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
|
|
reg = <0x0 0x72000 0x0 0x2000>;
|
|
interrupts = <GIC_SPI 217 IRQ_TYPE_EDGE_RISING>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sd_emmc_c: mmc@74000 {
|
|
compatible = "amlogic,meson-gx-mmc", "amlogic,meson-gxbb-mmc";
|
|
reg = <0x0 0x74000 0x0 0x2000>;
|
|
interrupts = <GIC_SPI 218 IRQ_TYPE_EDGE_RISING>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
vpu: vpu@d0100000 {
|
|
compatible = "amlogic,meson-gx-vpu";
|
|
reg = <0x0 0xd0100000 0x0 0x100000>,
|
|
<0x0 0xc883c000 0x0 0x1000>,
|
|
<0x0 0xc8838000 0x0 0x1000>;
|
|
reg-names = "vpu", "hhi", "dmc";
|
|
interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
/* CVBS VDAC output port */
|
|
cvbs_vdac_port: port@0 {
|
|
reg = <0>;
|
|
};
|
|
|
|
/* HDMI-TX output port */
|
|
hdmi_tx_port: port@1 {
|
|
reg = <1>;
|
|
|
|
hdmi_tx_out: endpoint {
|
|
remote-endpoint = <&hdmi_tx_in>;
|
|
};
|
|
};
|
|
};
|
|
|
|
hdmi_tx: hdmi-tx@c883a000 {
|
|
compatible = "amlogic,meson-gx-dw-hdmi";
|
|
reg = <0x0 0xc883a000 0x0 0x1c>;
|
|
interrupts = <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
|
|
/* VPU VENC Input */
|
|
hdmi_tx_venc_port: port@0 {
|
|
reg = <0>;
|
|
|
|
hdmi_tx_in: endpoint {
|
|
remote-endpoint = <&hdmi_tx_out>;
|
|
};
|
|
};
|
|
|
|
/* TMDS Output */
|
|
hdmi_tx_tmds_port: port@1 {
|
|
reg = <1>;
|
|
};
|
|
};
|
|
};
|
|
};
|