mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-20 17:08:52 +09:00
![Wolfgang Denk](/assets/img/avatar_default.png)
CONFIG_SYS_GBL_DATA_SIZE has always been just a bad workarond for not being able to use "sizeof(struct global_data)" in assembler files. Recent experience has shown that manual synchronization is not reliable enough. This patch renames CONFIG_SYS_GBL_DATA_SIZE into GENERATED_GBL_DATA_SIZE which gets automatically generated by the asm-offsets tool. In the result, all definitions of this value can be deleted from the board config files. We have to make sure that all files that reference such data include the new <asm-offsets.h> file. No other changes have been done yet, but it is obvious that similar changes / simplifications can be done for other, related macro definitions as well. Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Kumar Gala <galak@kernel.crashing.org>
433 lines
15 KiB
C
433 lines
15 KiB
C
/*
|
|
* (C) Copyright 2003
|
|
* EMK Elektronik GmbH <www.emk-elektronik.de>
|
|
* Reinhard Meyer <r.meyer@emk-elektronik.de>
|
|
*
|
|
* Configuation settings for the TOP860 board.
|
|
*
|
|
* -----------------------------------------------------------------
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
/*
|
|
* TOP860 is a simple module:
|
|
* 16-bit wide FLASH on CS0 (2MB or more)
|
|
* 32-bit wide DRAM on CS2 (either 4MB or 16MB)
|
|
* FEC with Am79C874 100-Base-T and Fiber Optic
|
|
* Ports available, but we choose SMC1 for Console
|
|
* 8k I2C EEPROM at address 0xae, 6k user available, 2k factory set
|
|
* 32768Hz crystal PLL set for 49.152MHz Core and 24.576MHz Bus Clock
|
|
*
|
|
* This config has been copied from MBX.h / MBX860T.h
|
|
*/
|
|
/*
|
|
* board/config.h - configuration options, board specific
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
/*
|
|
* High Level Configuration Options
|
|
* (easy to change)
|
|
*/
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* CPU and BOARD type
|
|
*/
|
|
#define CONFIG_MPC860 1 /* This is a MPC860 CPU */
|
|
#define CONFIG_MPC860T 1 /* even better... an FEC! */
|
|
#define CONFIG_TOP860 1 /* ...on a TOP860 module */
|
|
|
|
#define CONFIG_SYS_TEXT_BASE 0x80000000
|
|
|
|
#undef CONFIG_WATCHDOG /* watchdog disabled */
|
|
#define CONFIG_IDENT_STRING " EMK TOP860"
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* CLOCK settings
|
|
*/
|
|
#define CONFIG_SYSCLK 49152000
|
|
#define CONFIG_SYS_XTAL 32768
|
|
#define CONFIG_EBDF 1
|
|
#define CONFIG_COM 3
|
|
#define CONFIG_RTC_MPC8xx
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Physical memory map as defined by EMK
|
|
*/
|
|
#define CONFIG_SYS_IMMR 0xFFF00000 /* Internal Memory Mapped Register */
|
|
#define CONFIG_SYS_FLASH_BASE 0x80000000 /* FLASH in final mapping */
|
|
#define CONFIG_SYS_DRAM_BASE 0x00000000 /* DRAM in final mapping */
|
|
#define CONFIG_SYS_FLASH_MAX 0x00400000 /* max FLASH to expect */
|
|
#define CONFIG_SYS_DRAM_MAX 0x01000000 /* max DRAM to expect */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* derived values
|
|
*/
|
|
#define CONFIG_SYS_MF (CONFIG_SYSCLK/CONFIG_SYS_XTAL)
|
|
#define CONFIG_SYS_CPUCLOCK CONFIG_SYSCLK
|
|
#define CONFIG_SYS_BRGCLOCK CONFIG_SYSCLK
|
|
#define CONFIG_SYS_BUSCLOCK (CONFIG_SYSCLK >> CONFIG_EBDF)
|
|
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
|
|
#define CONFIG_8xx_GCLK_FREQ CONFIG_SYSCLK
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* FLASH organization
|
|
*/
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
|
|
|
|
#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
|
|
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
|
|
|
|
#define CONFIG_SYS_FLASH_CFI
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Command interpreter
|
|
*/
|
|
#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
|
|
#undef CONFIG_8xx_CONS_SMC2
|
|
#define CONFIG_BAUDRATE 9600
|
|
|
|
/*
|
|
* Allow partial commands to be matched to uniqueness.
|
|
*/
|
|
#define CONFIG_SYS_MATCH_PARTIAL_CMD
|
|
|
|
|
|
/*
|
|
* Command line configuration.
|
|
*/
|
|
#include <config_cmd_default.h>
|
|
|
|
#define CONFIG_CMD_ASKENV
|
|
#define CONFIG_CMD_DHCP
|
|
#define CONFIG_CMD_I2C
|
|
#define CONFIG_CMD_EEPROM
|
|
#define CONFIG_CMD_REGINFO
|
|
#define CONFIG_CMD_IMMAP
|
|
#define CONFIG_CMD_ELF
|
|
#define CONFIG_CMD_DATE
|
|
#define CONFIG_CMD_MII
|
|
#define CONFIG_CMD_BEDBUG
|
|
|
|
|
|
#define CONFIG_SOURCE 1
|
|
#define CONFIG_SYS_LOADS_BAUD_CHANGE 1
|
|
#undef CONFIG_LOADS_ECHO /* NO echo on for serial download */
|
|
|
|
|
|
#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
|
#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
|
|
|
|
#undef CONFIG_SYS_HUSH_PARSER /* Hush parse for U-Boot */
|
|
|
|
#ifdef CONFIG_SYS_HUSH_PARSER
|
|
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
|
|
#endif
|
|
|
|
#if defined(CONFIG_CMD_KGDB)
|
|
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
|
|
#else
|
|
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
|
|
#endif
|
|
|
|
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
|
|
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
|
|
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Memory Test Command
|
|
*/
|
|
#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
|
|
#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Environment handler
|
|
* only the first 6k in EEPROM are available for user. Of that we use 256b
|
|
*/
|
|
#define CONFIG_SOFT_I2C
|
|
#define CONFIG_ENV_IS_IN_EEPROM 1 /* turn on EEPROM env feature */
|
|
#define CONFIG_ENV_OFFSET 0x1000
|
|
#define CONFIG_ENV_SIZE 0x0700
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57
|
|
#define CONFIG_SYS_FACT_OFFSET 0x1800
|
|
#define CONFIG_SYS_FACT_SIZE 0x0800
|
|
#define CONFIG_SYS_I2C_FACT_ADDR 0x57
|
|
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
|
|
#define CONFIG_SYS_EEPROM_SIZE 0x2000
|
|
#define CONFIG_SYS_I2C_SPEED 100000
|
|
#define CONFIG_SYS_I2C_SLAVE 0xFE
|
|
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 12
|
|
#define CONFIG_ENV_OVERWRITE
|
|
#define CONFIG_MISC_INIT_R
|
|
|
|
#if defined (CONFIG_SOFT_I2C)
|
|
#define SDA 0x00010
|
|
#define SCL 0x00020
|
|
#define __I2C_DIR immr->im_cpm.cp_pbdir
|
|
#define __I2C_DAT immr->im_cpm.cp_pbdat
|
|
#define __I2C_PAR immr->im_cpm.cp_pbpar
|
|
#define __I2C_ODR immr->im_cpm.cp_pbodr
|
|
#define I2C_INIT { __I2C_PAR &= ~(SDA|SCL); \
|
|
__I2C_ODR &= ~(SDA|SCL); \
|
|
__I2C_DAT |= (SDA|SCL); \
|
|
__I2C_DIR|=(SDA|SCL); }
|
|
#define I2C_READ ((__I2C_DAT & SDA) ? 1 : 0)
|
|
#define I2C_SDA(x) { if (x) __I2C_DAT |= SDA; else __I2C_DAT &= ~SDA; }
|
|
#define I2C_SCL(x) { if (x) __I2C_DAT |= SCL; else __I2C_DAT &= ~SCL; }
|
|
#define I2C_DELAY { udelay(5); }
|
|
#define I2C_ACTIVE { __I2C_DIR |= SDA; }
|
|
#define I2C_TRISTATE { __I2C_DIR &= ~SDA; }
|
|
#endif
|
|
|
|
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* defines we need to get FEC running
|
|
*/
|
|
#define CONFIG_NET_MULTI 1 /* the only way to get the FEC in */
|
|
#define CONFIG_FEC_ENET 1 /* Ethernet only via FEC */
|
|
#define FEC_ENET 1 /* eth.c needs it that way... */
|
|
#define CONFIG_SYS_DISCOVER_PHY 1
|
|
#define CONFIG_MII 1
|
|
#define CONFIG_MII_INIT 1
|
|
#define CONFIG_PHY_ADDR 31
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* adresses
|
|
*/
|
|
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
|
|
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
|
|
#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Start addresses for the final memory configuration
|
|
* (Set up by the startup code)
|
|
* Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
|
|
*/
|
|
#define CONFIG_SYS_SDRAM_BASE 0x00000000
|
|
#define CONFIG_SYS_FLASH_BASE 0x80000000
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Definitions for initial stack pointer and data area (in DPRAM)
|
|
*/
|
|
#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
|
|
#define CONFIG_SYS_INIT_RAM_SIZE 0x2f00 /* Size of used area in DPRAM */
|
|
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
|
#define CONFIG_SYS_INIT_VPD_SIZE 256 /* size in bytes reserved for vpd buffer */
|
|
#define CONFIG_SYS_INIT_VPD_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - CONFIG_SYS_INIT_VPD_SIZE)
|
|
#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_VPD_OFFSET-8)
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Cache Configuration
|
|
*/
|
|
#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
|
|
#if defined(CONFIG_CMD_KGDB)
|
|
#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */
|
|
#endif
|
|
|
|
/* Interrupt level assignments.
|
|
*/
|
|
#define FEC_INTERRUPT SIU_LEVEL1 /* FEC interrupt */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Debug Enable Register
|
|
*-----------------------------------------------------------------------
|
|
*
|
|
*/
|
|
#define CONFIG_SYS_DER 0 /* used in start.S */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
|
|
*-----------------------------------------------------------------------
|
|
* set up PLPRCR (PLL, Low-Power, and Reset Control Register)
|
|
* 12 MF calculated Multiplication factor
|
|
* 4 0 0000
|
|
* 1 SPLSS 0 System PLL lock status sticky
|
|
* 1 TEXPS 1 Timer expired status
|
|
* 1 0 0
|
|
* 1 TMIST 0 Timers interrupt status
|
|
* 1 0 0
|
|
* 1 CSRC 0 Clock source (0=DFNH, 1=DFNL)
|
|
* 2 LPM 00 Low-power modes
|
|
* 1 CSR 0 Checkstop reset enable
|
|
* 1 LOLRE 0 Loss-of-lock reset enable
|
|
* 1 FIOPD 0 Force I/O pull down
|
|
* 5 0 00000
|
|
*/
|
|
#define CONFIG_SYS_PLPRCR (PLPRCR_TEXPS | ((CONFIG_SYS_MF-1)<<20))
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* SYPCR - System Protection Control 11-9
|
|
* SYPCR can only be written once after reset!
|
|
*-----------------------------------------------------------------------
|
|
* set up SYPCR:
|
|
* 16 SWTC 0xffff Software watchdog timer count
|
|
* 8 BMT 0xff Bus monitor timing
|
|
* 1 BME 1 Bus monitor enable
|
|
* 3 0 000
|
|
* 1 SWF 1 Software watchdog freeze
|
|
* 1 SWE 0/1 Software watchdog enable
|
|
* 1 SWRI 0/1 Software watchdog reset/interrupt select (1=HRESET)
|
|
* 1 SWP 0/1 Software watchdog prescale (1=/2048)
|
|
*/
|
|
#if defined (CONFIG_WATCHDOG)
|
|
#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
|
|
SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
|
|
#else
|
|
#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF)
|
|
#endif
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* SIUMCR - SIU Module Configuration 11-6
|
|
*-----------------------------------------------------------------------
|
|
* set up SIUMCR
|
|
* 1 EARB 0 External arbitration
|
|
* 3 EARP 000 External arbitration request priority
|
|
* 4 0 0000
|
|
* 1 DSHW 0 Data show cycles
|
|
* 2 DBGC 00 Debug pin configuration
|
|
* 2 DBPC 00 Debug port pins configuration
|
|
* 1 0 0
|
|
* 1 FRC 0 FRZ pin configuration
|
|
* 1 DLK 0 Debug register lock
|
|
* 1 OPAR 0 Odd parity
|
|
* 1 PNCS 0 Parity enable for non memory controller regions
|
|
* 1 DPC 0 Data parity pins configuration
|
|
* 1 MPRE 0 Multiprocessor reservation enable
|
|
* 2 MLRC 11 Multi level reservation control (00=IRQ4, 01=3State, 10=KR/RETRY, 11=SPKROUT)
|
|
* 1 AEME 0 Async external master enable
|
|
* 1 SEME 0 Sync external master enable
|
|
* 1 BSC 0 Byte strobe configuration
|
|
* 1 GB5E 0 GPL_B5 enable
|
|
* 1 B2DD 0 Bank 2 double drive
|
|
* 1 B3DD 0 Bank 3 double drive
|
|
* 4 0 0000
|
|
*/
|
|
#define CONFIG_SYS_SIUMCR (SIUMCR_MLRC11)
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* TBSCR - Time Base Status and Control 11-26
|
|
*-----------------------------------------------------------------------
|
|
* Clear Reference Interrupt Status, Timebase freezing enabled
|
|
*/
|
|
#define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* PISCR - Periodic Interrupt Status and Control 11-31
|
|
*-----------------------------------------------------------------------
|
|
* Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
|
|
*/
|
|
#define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF | PISCR_PTE)
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* SCCR - System Clock and reset Control Register 15-27
|
|
*-----------------------------------------------------------------------
|
|
* set up SCCR (System Clock and Reset Control Register)
|
|
* 1 0 0
|
|
* 2 COM 11 Clock output module (00=full, 01=half, 11=off)
|
|
* 3 0 000
|
|
* 1 TBS 1 Timebase source (0=OSCCLK, 1=GCLK2)
|
|
* 1 RTDIV 0 Real-time clock divide (0=/4, 1=/512)
|
|
* 1 RTSEL 0 Real-time clock select (0=OSCM, 1=EXTCLK)
|
|
* 1 CRQEN 0 CPM request enable
|
|
* 1 PRQEN 0 Power management request enable
|
|
* 2 0 00
|
|
* 2 EBDF xx External bus division factor
|
|
* 2 0 00
|
|
* 2 DFSYNC 00 Division factor for SYNCLK
|
|
* 2 DFBRG 00 Division factor for BRGCLK
|
|
* 3 DFNL 000 Division factor low frequency
|
|
* 3 DFNH 000 Division factor high frequency
|
|
* 5 0 00000
|
|
*/
|
|
#define SCCR_MASK 0
|
|
#ifdef CONFIG_EBDF
|
|
#define CONFIG_SYS_SCCR (SCCR_COM11 | SCCR_TBS | SCCR_EBDF01)
|
|
#else
|
|
#define CONFIG_SYS_SCCR (SCCR_COM11 | SCCR_TBS)
|
|
#endif
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Chip Select 0 - FLASH
|
|
*-----------------------------------------------------------------------
|
|
* Preliminary Values
|
|
*/
|
|
/* FLASH timing: CSNT=1 ACS=10 BIH=1 SCY=4 SETA=0 TLRX=1 EHTR=1 */
|
|
#define CONFIG_SYS_OR_TIMING_FLASH (OR_CSNT_SAM | OR_ACS_DIV4 | OR_BI | OR_SCY_4_CLK | OR_TRLX | OR_EHTR)
|
|
#define CONFIG_SYS_OR0_PRELIM (-CONFIG_SYS_FLASH_MAX | CONFIG_SYS_OR_TIMING_FLASH)
|
|
#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | BR_PS_16 | BR_V )
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* misc
|
|
*-----------------------------------------------------------------------
|
|
*
|
|
*/
|
|
/*
|
|
* Set the autoboot delay in seconds. A delay of -1 disables autoboot
|
|
*/
|
|
#define CONFIG_BOOTDELAY 5
|
|
|
|
/*
|
|
* Pass the clock frequency to the Linux kernel in units of MHz
|
|
*/
|
|
#define CONFIG_CLOCKS_IN_MHZ
|
|
|
|
#define CONFIG_PREBOOT \
|
|
"echo;echo"
|
|
|
|
#undef CONFIG_BOOTARGS
|
|
#define CONFIG_BOOTCOMMAND \
|
|
"bootp;" \
|
|
"setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
|
|
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
|
|
"bootm"
|
|
|
|
/*
|
|
* BOOTP options
|
|
*/
|
|
#define CONFIG_BOOTP_SUBNETMASK
|
|
#define CONFIG_BOOTP_GATEWAY
|
|
#define CONFIG_BOOTP_HOSTNAME
|
|
#define CONFIG_BOOTP_BOOTPATH
|
|
#define CONFIG_BOOTP_BOOTFILESIZE
|
|
|
|
|
|
/*
|
|
* Set default IP stuff just to get bootstrap entries into the
|
|
* environment so that we can source the full default environment.
|
|
*/
|
|
#define CONFIG_ETHADDR 9a:52:63:15:85:25
|
|
#define CONFIG_SERVERIP 10.0.4.200
|
|
#define CONFIG_IPADDR 10.0.4.111
|
|
|
|
#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */
|
|
#define CONFIG_SYS_TFTP_LOADADDR 0x00100000
|
|
|
|
/*
|
|
* For booting Linux, the board info and command line data
|
|
* have to be in the first 8 MB of memory, since this is
|
|
* the maximum mapped by the Linux kernel during initialization.
|
|
*/
|
|
#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
|
|
|
|
#endif /* __CONFIG_H */
|