mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-28 21:09:00 +09:00
![Simon Glass](/assets/img/avatar_default.png)
Move this header out of the common header. Network support is used in quite a few places but it still does not warrant blanket inclusion. Note that this net.h header itself has quite a lot in it. It could be split into the driver-mode support, functions, structures, checksumming, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
262 lines
6.3 KiB
C
262 lines
6.3 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2010
|
|
* ISEE 2007 SL, <www.iseebcn.com>
|
|
*/
|
|
#include <common.h>
|
|
#include <env.h>
|
|
#include <malloc.h>
|
|
#include <net.h>
|
|
#include <status_led.h>
|
|
#include <dm.h>
|
|
#include <ns16550.h>
|
|
#include <twl4030.h>
|
|
#include <netdev.h>
|
|
#include <spl.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/mem.h>
|
|
#include <asm/arch/mmc_host_def.h>
|
|
#include <asm/arch/mux.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/rawnand.h>
|
|
#include <linux/mtd/onenand.h>
|
|
#include <jffs2/load_kernel.h>
|
|
#include <mtd_node.h>
|
|
#include <fdt_support.h>
|
|
#include "igep00x0.h"
|
|
|
|
static const struct ns16550_platdata igep_serial = {
|
|
.base = OMAP34XX_UART3,
|
|
.reg_shift = 2,
|
|
.clock = V_NS16550_CLK,
|
|
.fcr = UART_FCR_DEFVAL,
|
|
};
|
|
|
|
U_BOOT_DEVICE(igep_uart) = {
|
|
"ns16550_serial",
|
|
&igep_serial
|
|
};
|
|
|
|
/*
|
|
* Routine: get_board_revision
|
|
* Description: GPIO_28 and GPIO_129 are used to read board and revision from
|
|
* IGEP00x0 boards. First of all, it is necessary to reset USB transceiver from
|
|
* IGEP0030 in order to read GPIO_IGEP00X0_BOARD_DETECTION correctly, because
|
|
* this functionality is shared by USB HOST.
|
|
* Once USB reset is applied, U-boot configures these pins as input pullup to
|
|
* detect board and revision:
|
|
* IGEP0020-RF = 0b00
|
|
* IGEP0020-RC = 0b01
|
|
* IGEP0030-RG = 0b10
|
|
* IGEP0030-RE = 0b11
|
|
*/
|
|
static int get_board_revision(void)
|
|
{
|
|
int revision;
|
|
|
|
gpio_request(IGEP0030_USB_TRANSCEIVER_RESET,
|
|
"igep0030_usb_transceiver_reset");
|
|
gpio_direction_output(IGEP0030_USB_TRANSCEIVER_RESET, 0);
|
|
|
|
gpio_request(GPIO_IGEP00X0_BOARD_DETECTION, "igep00x0_board_detection");
|
|
gpio_direction_input(GPIO_IGEP00X0_BOARD_DETECTION);
|
|
revision = 2 * gpio_get_value(GPIO_IGEP00X0_BOARD_DETECTION);
|
|
gpio_free(GPIO_IGEP00X0_BOARD_DETECTION);
|
|
|
|
gpio_request(GPIO_IGEP00X0_REVISION_DETECTION,
|
|
"igep00x0_revision_detection");
|
|
gpio_direction_input(GPIO_IGEP00X0_REVISION_DETECTION);
|
|
revision = revision + gpio_get_value(GPIO_IGEP00X0_REVISION_DETECTION);
|
|
gpio_free(GPIO_IGEP00X0_REVISION_DETECTION);
|
|
|
|
gpio_free(IGEP0030_USB_TRANSCEIVER_RESET);
|
|
|
|
return revision;
|
|
}
|
|
|
|
int onenand_board_init(struct mtd_info *mtd)
|
|
{
|
|
if (gpmc_cs0_flash == MTD_DEV_TYPE_ONENAND) {
|
|
struct onenand_chip *this = mtd->priv;
|
|
this->base = (void *)CONFIG_SYS_ONENAND_BASE;
|
|
return 0;
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
#if defined(CONFIG_CMD_NET)
|
|
static void reset_net_chip(int gpio)
|
|
{
|
|
if (!gpio_request(gpio, "eth nrst")) {
|
|
gpio_direction_output(gpio, 1);
|
|
udelay(1);
|
|
gpio_set_value(gpio, 0);
|
|
udelay(40);
|
|
gpio_set_value(gpio, 1);
|
|
mdelay(10);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Routine: setup_net_chip
|
|
* Description: Setting up the configuration GPMC registers specific to the
|
|
* Ethernet hardware.
|
|
*/
|
|
static void setup_net_chip(void)
|
|
{
|
|
struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE;
|
|
static const u32 gpmc_lan_config[] = {
|
|
NET_LAN9221_GPMC_CONFIG1,
|
|
NET_LAN9221_GPMC_CONFIG2,
|
|
NET_LAN9221_GPMC_CONFIG3,
|
|
NET_LAN9221_GPMC_CONFIG4,
|
|
NET_LAN9221_GPMC_CONFIG5,
|
|
NET_LAN9221_GPMC_CONFIG6,
|
|
};
|
|
|
|
enable_gpmc_cs_config(gpmc_lan_config, &gpmc_cfg->cs[5],
|
|
CONFIG_SMC911X_BASE, GPMC_SIZE_16M);
|
|
|
|
/* Enable off mode for NWE in PADCONF_GPMC_NWE register */
|
|
writew(readw(&ctrl_base->gpmc_nwe) | 0x0E00, &ctrl_base->gpmc_nwe);
|
|
/* Enable off mode for NOE in PADCONF_GPMC_NADV_ALE register */
|
|
writew(readw(&ctrl_base->gpmc_noe) | 0x0E00, &ctrl_base->gpmc_noe);
|
|
/* Enable off mode for ALE in PADCONF_GPMC_NADV_ALE register */
|
|
writew(readw(&ctrl_base->gpmc_nadv_ale) | 0x0E00,
|
|
&ctrl_base->gpmc_nadv_ale);
|
|
|
|
reset_net_chip(64);
|
|
}
|
|
|
|
int board_eth_init(bd_t *bis)
|
|
{
|
|
#ifdef CONFIG_SMC911X
|
|
return smc911x_initialize(0, CONFIG_SMC911X_BASE);
|
|
#else
|
|
return 0;
|
|
#endif
|
|
}
|
|
#else
|
|
static inline void setup_net_chip(void) {}
|
|
#endif
|
|
|
|
#ifdef CONFIG_OF_BOARD_SETUP
|
|
static int ft_enable_by_compatible(void *blob, char *compat, int enable)
|
|
{
|
|
int off = fdt_node_offset_by_compatible(blob, -1, compat);
|
|
if (off < 0)
|
|
return off;
|
|
|
|
if (enable)
|
|
fdt_status_okay(blob, off);
|
|
else
|
|
fdt_status_disabled(blob, off);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int ft_board_setup(void *blob, bd_t *bd)
|
|
{
|
|
#ifdef CONFIG_FDT_FIXUP_PARTITIONS
|
|
static const struct node_info nodes[] = {
|
|
{ "ti,omap2-nand", MTD_DEV_TYPE_NAND, },
|
|
{ "ti,omap2-onenand", MTD_DEV_TYPE_ONENAND, },
|
|
};
|
|
|
|
fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes));
|
|
#endif
|
|
ft_enable_by_compatible(blob, "ti,omap2-nand",
|
|
gpmc_cs0_flash == MTD_DEV_TYPE_NAND);
|
|
ft_enable_by_compatible(blob, "ti,omap2-onenand",
|
|
gpmc_cs0_flash == MTD_DEV_TYPE_ONENAND);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
void set_led(void)
|
|
{
|
|
switch (get_board_revision()) {
|
|
case 0:
|
|
case 1:
|
|
gpio_request(IGEP0020_GPIO_LED, "igep0020_gpio_led");
|
|
gpio_direction_output(IGEP0020_GPIO_LED, 1);
|
|
break;
|
|
case 2:
|
|
case 3:
|
|
gpio_request(IGEP0030_GPIO_LED, "igep0030_gpio_led");
|
|
gpio_direction_output(IGEP0030_GPIO_LED, 0);
|
|
break;
|
|
default:
|
|
/* Should not happen... */
|
|
break;
|
|
}
|
|
}
|
|
|
|
void set_boardname(void)
|
|
{
|
|
char rev[5] = { 'F','C','G','E', };
|
|
int i = get_board_revision();
|
|
|
|
rev[i+1] = 0;
|
|
env_set("board_rev", rev + i);
|
|
env_set("board_name", i < 2 ? "igep0020" : "igep0030");
|
|
}
|
|
|
|
/*
|
|
* Routine: misc_init_r
|
|
* Description: Configure board specific parts
|
|
*/
|
|
int misc_init_r(void)
|
|
{
|
|
t2_t *t2_base = (t2_t *)T2_BASE;
|
|
u32 pbias_lite;
|
|
|
|
twl4030_power_init();
|
|
|
|
/* set VSIM to 1.8V */
|
|
twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VSIM_DEDICATED,
|
|
TWL4030_PM_RECEIVER_VSIM_VSEL_18,
|
|
TWL4030_PM_RECEIVER_VSIM_DEV_GRP,
|
|
TWL4030_PM_RECEIVER_DEV_GRP_P1);
|
|
|
|
/* set up dual-voltage GPIOs to 1.8V */
|
|
pbias_lite = readl(&t2_base->pbias_lite);
|
|
pbias_lite &= ~PBIASLITEVMODE1;
|
|
pbias_lite |= PBIASLITEPWRDNZ1;
|
|
writel(pbias_lite, &t2_base->pbias_lite);
|
|
if (get_cpu_family() == CPU_OMAP36XX)
|
|
writel(readl(OMAP34XX_CTRL_WKUP_CTRL) |
|
|
OMAP34XX_CTRL_WKUP_CTRL_GPIO_IO_PWRDNZ,
|
|
OMAP34XX_CTRL_WKUP_CTRL);
|
|
|
|
setup_net_chip();
|
|
|
|
omap_die_id_display();
|
|
|
|
set_led();
|
|
|
|
set_boardname();
|
|
|
|
return 0;
|
|
}
|
|
|
|
void board_mtdparts_default(const char **mtdids, const char **mtdparts)
|
|
{
|
|
struct mtd_info *mtd = get_mtd_device(NULL, 0);
|
|
if (mtd) {
|
|
static char ids[24];
|
|
static char parts[48];
|
|
const char *linux_name = "omap2-nand";
|
|
if (strncmp(mtd->name, "onenand0", 8) == 0)
|
|
linux_name = "omap2-onenand";
|
|
snprintf(ids, sizeof(ids), "%s=%s", mtd->name, linux_name);
|
|
snprintf(parts, sizeof(parts), "mtdparts=%s:%dk(SPL),-(UBI)",
|
|
linux_name, 4 * mtd->erasesize >> 10);
|
|
*mtdids = ids;
|
|
*mtdparts = parts;
|
|
}
|
|
}
|