u-boot-brain/arch/arm/include/asm/arch-omap4/ehci.h
Govindraj.R 43b62393da ehci-omap: Clean up added ehci-omap.c
Clean up added ehci-omap.c and make it generic for re-use across
omap-soc having same ehci ip block. Also pass the modes to be configured
from board file and configure the ports accordingly. All usb layers
are not cache aligned, till then keep cache off for usb ops as ehci will use
internally dma for all usb ops.

* Add a generic common header ehci-omap.h having common ip block
  data and reg shifts.
* Rename and modify ehci-omap3 to ehci.h retain only conflicting
  sysc reg shifts remove others and move to common header file.
* pass the board data for beagle/panda accordinly to use
  ehci ports.

Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Govindraj.R <govindraj.raja@ti.com>
2012-02-12 10:11:31 +01:00

50 lines
1.7 KiB
C

/*
* OMAP EHCI port support
* Based on LINUX KERNEL
* drivers/usb/host/ehci-omap.c and drivers/mfd/omap-usb-host.c
*
* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com
* Author: Govindraj R <govindraj.raja@ti.com>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 of
* the License as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef _OMAP4_EHCI_H_
#define _OMAP4_EHCI_H_
#define OMAP_EHCI_BASE (OMAP44XX_L4_CORE_BASE + 0x64C00)
#define OMAP_UHH_BASE (OMAP44XX_L4_CORE_BASE + 0x64000)
#define OMAP_USBTLL_BASE (OMAP44XX_L4_CORE_BASE + 0x62000)
/* UHH, TLL and opt clocks */
#define CM_L3INIT_HSUSBHOST_CLKCTRL 0x4A009358UL
#define HSUSBHOST_CLKCTRL_CLKSEL_UTMI_P1_MASK (1 << 24)
/* TLL Register Set */
#define OMAP_USBTLL_SYSCONFIG_SIDLEMODE (1 << 3)
#define OMAP_USBTLL_SYSCONFIG_ENAWAKEUP (1 << 2)
#define OMAP_USBTLL_SYSCONFIG_SOFTRESET (1 << 1)
#define OMAP_USBTLL_SYSCONFIG_CACTIVITY (1 << 8)
#define OMAP_USBTLL_SYSSTATUS_RESETDONE 1
#define OMAP_UHH_SYSCONFIG_SOFTRESET 1
#define OMAP_UHH_SYSSTATUS_EHCI_RESETDONE (1 << 2)
#define OMAP_UHH_SYSCONFIG_NOIDLE (1 << 2)
#define OMAP_UHH_SYSCONFIG_NOSTDBY (1 << 4)
#define OMAP_UHH_SYSCONFIG_VAL (OMAP_UHH_SYSCONFIG_NOIDLE | \
OMAP_UHH_SYSCONFIG_NOSTDBY)
#endif /* _OMAP4_EHCI_H_ */