mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-19 00:18:51 +09:00
![Simon Glass](/assets/img/avatar_default.png)
Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
1305 lines
31 KiB
C
1305 lines
31 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Driver for the Atmel USBA high speed USB device controller
|
|
* [Original from Linux kernel: drivers/usb/gadget/atmel_usba_udc.c]
|
|
*
|
|
* Copyright (C) 2005-2013 Atmel Corporation
|
|
* Bo Shen <voice.shen@atmel.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/errno.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/hardware.h>
|
|
#include <linux/list.h>
|
|
#include <linux/usb/ch9.h>
|
|
#include <linux/usb/gadget.h>
|
|
#include <linux/usb/atmel_usba_udc.h>
|
|
#include <malloc.h>
|
|
|
|
#include "atmel_usba_udc.h"
|
|
|
|
static int vbus_is_present(struct usba_udc *udc)
|
|
{
|
|
/* No Vbus detection: Assume always present */
|
|
return 1;
|
|
}
|
|
|
|
static void next_fifo_transaction(struct usba_ep *ep, struct usba_request *req)
|
|
{
|
|
unsigned int transaction_len;
|
|
|
|
transaction_len = req->req.length - req->req.actual;
|
|
req->last_transaction = 1;
|
|
if (transaction_len > ep->ep.maxpacket) {
|
|
transaction_len = ep->ep.maxpacket;
|
|
req->last_transaction = 0;
|
|
} else if (transaction_len == ep->ep.maxpacket && req->req.zero) {
|
|
req->last_transaction = 0;
|
|
}
|
|
|
|
DBG(DBG_QUEUE, "%s: submit_transaction, req %p (length %d)%s\n",
|
|
ep->ep.name, req, transaction_len,
|
|
req->last_transaction ? ", done" : "");
|
|
|
|
memcpy(ep->fifo, req->req.buf + req->req.actual, transaction_len);
|
|
usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY);
|
|
req->req.actual += transaction_len;
|
|
}
|
|
|
|
static void submit_request(struct usba_ep *ep, struct usba_request *req)
|
|
{
|
|
DBG(DBG_QUEUE, "%s: submit_request: req %p (length %d), dma: %d\n",
|
|
ep->ep.name, req, req->req.length, req->using_dma);
|
|
|
|
req->req.actual = 0;
|
|
req->submitted = 1;
|
|
|
|
next_fifo_transaction(ep, req);
|
|
if (req->last_transaction) {
|
|
usba_ep_writel(ep, CTL_DIS, USBA_TX_PK_RDY);
|
|
usba_ep_writel(ep, CTL_ENB, USBA_TX_COMPLETE);
|
|
} else {
|
|
usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE);
|
|
usba_ep_writel(ep, CTL_ENB, USBA_TX_PK_RDY);
|
|
}
|
|
}
|
|
|
|
static void submit_next_request(struct usba_ep *ep)
|
|
{
|
|
struct usba_request *req;
|
|
|
|
if (list_empty(&ep->queue)) {
|
|
usba_ep_writel(ep, CTL_DIS, USBA_TX_PK_RDY | USBA_RX_BK_RDY);
|
|
return;
|
|
}
|
|
|
|
req = list_entry(ep->queue.next, struct usba_request, queue);
|
|
if (!req->submitted)
|
|
submit_request(ep, req);
|
|
}
|
|
|
|
static void send_status(struct usba_udc *udc, struct usba_ep *ep)
|
|
{
|
|
ep->state = STATUS_STAGE_IN;
|
|
usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY);
|
|
usba_ep_writel(ep, CTL_ENB, USBA_TX_COMPLETE);
|
|
}
|
|
|
|
static void receive_data(struct usba_ep *ep)
|
|
{
|
|
struct usba_udc *udc = ep->udc;
|
|
struct usba_request *req;
|
|
unsigned long status;
|
|
unsigned int bytecount, nr_busy;
|
|
int is_complete = 0;
|
|
|
|
status = usba_ep_readl(ep, STA);
|
|
nr_busy = USBA_BFEXT(BUSY_BANKS, status);
|
|
|
|
DBG(DBG_QUEUE, "receive data: nr_busy=%u\n", nr_busy);
|
|
|
|
while (nr_busy > 0) {
|
|
if (list_empty(&ep->queue)) {
|
|
usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY);
|
|
break;
|
|
}
|
|
req = list_entry(ep->queue.next,
|
|
struct usba_request, queue);
|
|
|
|
bytecount = USBA_BFEXT(BYTE_COUNT, status);
|
|
|
|
if (status & USBA_SHORT_PACKET)
|
|
is_complete = 1;
|
|
if (req->req.actual + bytecount >= req->req.length) {
|
|
is_complete = 1;
|
|
bytecount = req->req.length - req->req.actual;
|
|
}
|
|
|
|
memcpy(req->req.buf + req->req.actual, ep->fifo, bytecount);
|
|
req->req.actual += bytecount;
|
|
|
|
usba_ep_writel(ep, CLR_STA, USBA_RX_BK_RDY);
|
|
|
|
if (is_complete) {
|
|
DBG(DBG_QUEUE, "%s: request done\n", ep->ep.name);
|
|
req->req.status = 0;
|
|
list_del_init(&req->queue);
|
|
usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY);
|
|
spin_lock(&udc->lock);
|
|
req->req.complete(&ep->ep, &req->req);
|
|
spin_unlock(&udc->lock);
|
|
}
|
|
|
|
status = usba_ep_readl(ep, STA);
|
|
nr_busy = USBA_BFEXT(BUSY_BANKS, status);
|
|
|
|
if (is_complete && ep_is_control(ep)) {
|
|
send_status(udc, ep);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void
|
|
request_complete(struct usba_ep *ep, struct usba_request *req, int status)
|
|
{
|
|
if (req->req.status == -EINPROGRESS)
|
|
req->req.status = status;
|
|
|
|
DBG(DBG_GADGET | DBG_REQ, "%s: req %p complete: status %d, actual %u\n",
|
|
ep->ep.name, req, req->req.status, req->req.actual);
|
|
|
|
req->req.complete(&ep->ep, &req->req);
|
|
}
|
|
|
|
static void
|
|
request_complete_list(struct usba_ep *ep, struct list_head *list, int status)
|
|
{
|
|
struct usba_request *req, *tmp_req;
|
|
|
|
list_for_each_entry_safe(req, tmp_req, list, queue) {
|
|
list_del_init(&req->queue);
|
|
request_complete(ep, req, status);
|
|
}
|
|
}
|
|
|
|
static int
|
|
usba_ep_enable(struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
|
|
{
|
|
struct usba_ep *ep = to_usba_ep(_ep);
|
|
struct usba_udc *udc = ep->udc;
|
|
unsigned long flags = 0, ept_cfg, maxpacket;
|
|
unsigned int nr_trans;
|
|
|
|
DBG(DBG_GADGET, "%s: ep_enable: desc=%p\n", ep->ep.name, desc);
|
|
|
|
maxpacket = usb_endpoint_maxp(desc) & 0x7ff;
|
|
|
|
if (((desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK)
|
|
!= ep->index) ||
|
|
ep->index == 0 ||
|
|
desc->bDescriptorType != USB_DT_ENDPOINT ||
|
|
maxpacket == 0 ||
|
|
maxpacket > ep->fifo_size) {
|
|
DBG(DBG_ERR, "ep_enable: Invalid argument");
|
|
return -EINVAL;
|
|
}
|
|
|
|
ep->is_isoc = 0;
|
|
ep->is_in = 0;
|
|
|
|
if (maxpacket <= 8)
|
|
ept_cfg = USBA_BF(EPT_SIZE, USBA_EPT_SIZE_8);
|
|
else
|
|
/* LSB is bit 1, not 0 */
|
|
ept_cfg = USBA_BF(EPT_SIZE, fls(maxpacket - 1) - 3);
|
|
|
|
DBG(DBG_HW, "%s: EPT_SIZE = %lu (maxpacket = %lu)\n",
|
|
ep->ep.name, ept_cfg, maxpacket);
|
|
|
|
if (usb_endpoint_dir_in(desc)) {
|
|
ep->is_in = 1;
|
|
ept_cfg |= USBA_EPT_DIR_IN;
|
|
}
|
|
|
|
switch (usb_endpoint_type(desc)) {
|
|
case USB_ENDPOINT_XFER_CONTROL:
|
|
ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_CONTROL);
|
|
ept_cfg |= USBA_BF(BK_NUMBER, USBA_BK_NUMBER_ONE);
|
|
break;
|
|
case USB_ENDPOINT_XFER_ISOC:
|
|
if (!ep->can_isoc) {
|
|
DBG(DBG_ERR, "ep_enable: %s is not isoc capable\n",
|
|
ep->ep.name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/*
|
|
* Bits 11:12 specify number of _additional_
|
|
* transactions per microframe.
|
|
*/
|
|
nr_trans = ((usb_endpoint_maxp(desc) >> 11) & 3) + 1;
|
|
if (nr_trans > 3)
|
|
return -EINVAL;
|
|
|
|
ep->is_isoc = 1;
|
|
ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_ISO);
|
|
|
|
/*
|
|
* Do triple-buffering on high-bandwidth iso endpoints.
|
|
*/
|
|
if (nr_trans > 1 && ep->nr_banks == 3)
|
|
ept_cfg |= USBA_BF(BK_NUMBER, USBA_BK_NUMBER_TRIPLE);
|
|
else
|
|
ept_cfg |= USBA_BF(BK_NUMBER, USBA_BK_NUMBER_DOUBLE);
|
|
ept_cfg |= USBA_BF(NB_TRANS, nr_trans);
|
|
break;
|
|
case USB_ENDPOINT_XFER_BULK:
|
|
ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_BULK);
|
|
ept_cfg |= USBA_BF(BK_NUMBER, USBA_BK_NUMBER_ONE);
|
|
break;
|
|
case USB_ENDPOINT_XFER_INT:
|
|
ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_INT);
|
|
ept_cfg |= USBA_BF(BK_NUMBER, USBA_BK_NUMBER_ONE);
|
|
break;
|
|
}
|
|
|
|
spin_lock_irqsave(&ep->udc->lock, flags);
|
|
|
|
ep->desc = desc;
|
|
ep->ep.maxpacket = maxpacket;
|
|
|
|
usba_ep_writel(ep, CFG, ept_cfg);
|
|
usba_ep_writel(ep, CTL_ENB, USBA_EPT_ENABLE);
|
|
|
|
usba_writel(udc, INT_ENB,
|
|
(usba_readl(udc, INT_ENB)
|
|
| USBA_BF(EPT_INT, 1 << ep->index)));
|
|
|
|
spin_unlock_irqrestore(&udc->lock, flags);
|
|
|
|
DBG(DBG_HW, "EPT_CFG%d after init: %#08lx\n", ep->index,
|
|
(unsigned long)usba_ep_readl(ep, CFG));
|
|
DBG(DBG_HW, "INT_ENB after init: %#08lx\n",
|
|
(unsigned long)usba_readl(udc, INT_ENB));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int usba_ep_disable(struct usb_ep *_ep)
|
|
{
|
|
struct usba_ep *ep = to_usba_ep(_ep);
|
|
struct usba_udc *udc = ep->udc;
|
|
LIST_HEAD(req_list);
|
|
unsigned long flags = 0;
|
|
|
|
DBG(DBG_GADGET, "ep_disable: %s\n", ep->ep.name);
|
|
|
|
spin_lock_irqsave(&udc->lock, flags);
|
|
|
|
if (!ep->desc) {
|
|
spin_unlock_irqrestore(&udc->lock, flags);
|
|
/* REVISIT because this driver disables endpoints in
|
|
* reset_all_endpoints() before calling disconnect(),
|
|
* most gadget drivers would trigger this non-error ...
|
|
*/
|
|
if (udc->gadget.speed != USB_SPEED_UNKNOWN)
|
|
DBG(DBG_ERR, "ep_disable: %s not enabled\n",
|
|
ep->ep.name);
|
|
return -EINVAL;
|
|
}
|
|
ep->desc = NULL;
|
|
|
|
list_splice_init(&ep->queue, &req_list);
|
|
usba_ep_writel(ep, CFG, 0);
|
|
usba_ep_writel(ep, CTL_DIS, USBA_EPT_ENABLE);
|
|
usba_writel(udc, INT_ENB,
|
|
usba_readl(udc, INT_ENB) &
|
|
~USBA_BF(EPT_INT, 1 << ep->index));
|
|
|
|
request_complete_list(ep, &req_list, -ESHUTDOWN);
|
|
|
|
spin_unlock_irqrestore(&udc->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct usb_request *
|
|
usba_ep_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags)
|
|
{
|
|
struct usba_request *req;
|
|
|
|
DBG(DBG_GADGET, "ep_alloc_request: %p, 0x%x\n", _ep, gfp_flags);
|
|
|
|
req = calloc(1, sizeof(struct usba_request));
|
|
if (!req)
|
|
return NULL;
|
|
|
|
INIT_LIST_HEAD(&req->queue);
|
|
|
|
return &req->req;
|
|
}
|
|
|
|
static void
|
|
usba_ep_free_request(struct usb_ep *_ep, struct usb_request *_req)
|
|
{
|
|
struct usba_request *req = to_usba_req(_req);
|
|
|
|
DBG(DBG_GADGET, "ep_free_request: %p, %p\n", _ep, _req);
|
|
|
|
free(req);
|
|
}
|
|
|
|
static int
|
|
usba_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
|
|
{
|
|
struct usba_request *req = to_usba_req(_req);
|
|
struct usba_ep *ep = to_usba_ep(_ep);
|
|
struct usba_udc *udc = ep->udc;
|
|
unsigned long flags = 0;
|
|
int ret;
|
|
|
|
DBG(DBG_GADGET | DBG_QUEUE | DBG_REQ, "%s: queue req %p, len %u\n",
|
|
ep->ep.name, req, _req->length);
|
|
|
|
if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN ||
|
|
!ep->desc)
|
|
return -ESHUTDOWN;
|
|
|
|
req->submitted = 0;
|
|
req->using_dma = 0;
|
|
req->last_transaction = 0;
|
|
|
|
_req->status = -EINPROGRESS;
|
|
_req->actual = 0;
|
|
|
|
/* May have received a reset since last time we checked */
|
|
ret = -ESHUTDOWN;
|
|
spin_lock_irqsave(&udc->lock, flags);
|
|
if (ep->desc) {
|
|
list_add_tail(&req->queue, &ep->queue);
|
|
|
|
if ((!ep_is_control(ep) && ep->is_in) ||
|
|
(ep_is_control(ep) && (ep->state == DATA_STAGE_IN ||
|
|
ep->state == STATUS_STAGE_IN)))
|
|
usba_ep_writel(ep, CTL_ENB, USBA_TX_PK_RDY);
|
|
else
|
|
usba_ep_writel(ep, CTL_ENB, USBA_RX_BK_RDY);
|
|
|
|
ret = 0;
|
|
}
|
|
spin_unlock_irqrestore(&udc->lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int usba_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
|
|
{
|
|
struct usba_ep *ep = to_usba_ep(_ep);
|
|
struct usba_request *req = to_usba_req(_req);
|
|
|
|
DBG(DBG_GADGET | DBG_QUEUE, "ep_dequeue: %s, req %p\n",
|
|
ep->ep.name, req);
|
|
|
|
/*
|
|
* Errors should stop the queue from advancing until the
|
|
* completion function returns.
|
|
*/
|
|
list_del_init(&req->queue);
|
|
|
|
request_complete(ep, req, -ECONNRESET);
|
|
|
|
/* Process the next request if any */
|
|
submit_next_request(ep);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int usba_ep_set_halt(struct usb_ep *_ep, int value)
|
|
{
|
|
struct usba_ep *ep = to_usba_ep(_ep);
|
|
unsigned long flags = 0;
|
|
int ret = 0;
|
|
|
|
DBG(DBG_GADGET, "endpoint %s: %s HALT\n", ep->ep.name,
|
|
value ? "set" : "clear");
|
|
|
|
if (!ep->desc) {
|
|
DBG(DBG_ERR, "Attempted to halt uninitialized ep %s\n",
|
|
ep->ep.name);
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (ep->is_isoc) {
|
|
DBG(DBG_ERR, "Attempted to halt isochronous ep %s\n",
|
|
ep->ep.name);
|
|
return -ENOTTY;
|
|
}
|
|
|
|
spin_lock_irqsave(&udc->lock, flags);
|
|
|
|
/*
|
|
* We can't halt IN endpoints while there are still data to be
|
|
* transferred
|
|
*/
|
|
if (!list_empty(&ep->queue) ||
|
|
((value && ep->is_in && (usba_ep_readl(ep, STA) &
|
|
USBA_BF(BUSY_BANKS, -1L))))) {
|
|
ret = -EAGAIN;
|
|
} else {
|
|
if (value)
|
|
usba_ep_writel(ep, SET_STA, USBA_FORCE_STALL);
|
|
else
|
|
usba_ep_writel(ep, CLR_STA,
|
|
USBA_FORCE_STALL | USBA_TOGGLE_CLR);
|
|
usba_ep_readl(ep, STA);
|
|
}
|
|
|
|
spin_unlock_irqrestore(&udc->lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int usba_ep_fifo_status(struct usb_ep *_ep)
|
|
{
|
|
struct usba_ep *ep = to_usba_ep(_ep);
|
|
|
|
return USBA_BFEXT(BYTE_COUNT, usba_ep_readl(ep, STA));
|
|
}
|
|
|
|
static void usba_ep_fifo_flush(struct usb_ep *_ep)
|
|
{
|
|
struct usba_ep *ep = to_usba_ep(_ep);
|
|
struct usba_udc *udc = ep->udc;
|
|
|
|
usba_writel(udc, EPT_RST, 1 << ep->index);
|
|
}
|
|
|
|
static const struct usb_ep_ops usba_ep_ops = {
|
|
.enable = usba_ep_enable,
|
|
.disable = usba_ep_disable,
|
|
.alloc_request = usba_ep_alloc_request,
|
|
.free_request = usba_ep_free_request,
|
|
.queue = usba_ep_queue,
|
|
.dequeue = usba_ep_dequeue,
|
|
.set_halt = usba_ep_set_halt,
|
|
.fifo_status = usba_ep_fifo_status,
|
|
.fifo_flush = usba_ep_fifo_flush,
|
|
};
|
|
|
|
static int usba_udc_get_frame(struct usb_gadget *gadget)
|
|
{
|
|
struct usba_udc *udc = to_usba_udc(gadget);
|
|
|
|
return USBA_BFEXT(FRAME_NUMBER, usba_readl(udc, FNUM));
|
|
}
|
|
|
|
static int usba_udc_wakeup(struct usb_gadget *gadget)
|
|
{
|
|
struct usba_udc *udc = to_usba_udc(gadget);
|
|
unsigned long flags = 0;
|
|
u32 ctrl;
|
|
int ret = -EINVAL;
|
|
|
|
spin_lock_irqsave(&udc->lock, flags);
|
|
if (udc->devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP)) {
|
|
ctrl = usba_readl(udc, CTRL);
|
|
usba_writel(udc, CTRL, ctrl | USBA_REMOTE_WAKE_UP);
|
|
ret = 0;
|
|
}
|
|
spin_unlock_irqrestore(&udc->lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
usba_udc_set_selfpowered(struct usb_gadget *gadget, int is_selfpowered)
|
|
{
|
|
struct usba_udc *udc = to_usba_udc(gadget);
|
|
unsigned long flags = 0;
|
|
|
|
spin_lock_irqsave(&udc->lock, flags);
|
|
if (is_selfpowered)
|
|
udc->devstatus |= 1 << USB_DEVICE_SELF_POWERED;
|
|
else
|
|
udc->devstatus &= ~(1 << USB_DEVICE_SELF_POWERED);
|
|
spin_unlock_irqrestore(&udc->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct usb_gadget_ops usba_udc_ops = {
|
|
.get_frame = usba_udc_get_frame,
|
|
.wakeup = usba_udc_wakeup,
|
|
.set_selfpowered = usba_udc_set_selfpowered,
|
|
};
|
|
|
|
static struct usb_endpoint_descriptor usba_ep0_desc = {
|
|
.bLength = USB_DT_ENDPOINT_SIZE,
|
|
.bDescriptorType = USB_DT_ENDPOINT,
|
|
.bEndpointAddress = 0,
|
|
.bmAttributes = USB_ENDPOINT_XFER_CONTROL,
|
|
.wMaxPacketSize = cpu_to_le16(64),
|
|
/* FIXME: I have no idea what to put here */
|
|
.bInterval = 1,
|
|
};
|
|
|
|
/*
|
|
* Called with interrupts disabled and udc->lock held.
|
|
*/
|
|
static void reset_all_endpoints(struct usba_udc *udc)
|
|
{
|
|
struct usba_ep *ep;
|
|
struct usba_request *req, *tmp_req;
|
|
|
|
usba_writel(udc, EPT_RST, ~0UL);
|
|
|
|
ep = to_usba_ep(udc->gadget.ep0);
|
|
list_for_each_entry_safe(req, tmp_req, &ep->queue, queue) {
|
|
list_del_init(&req->queue);
|
|
request_complete(ep, req, -ECONNRESET);
|
|
}
|
|
|
|
/* NOTE: normally, the next call to the gadget driver is in
|
|
* charge of disabling endpoints... usually disconnect().
|
|
* The exception would be entering a high speed test mode.
|
|
*
|
|
* FIXME remove this code ... and retest thoroughly.
|
|
*/
|
|
list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) {
|
|
if (ep->desc) {
|
|
spin_unlock(&udc->lock);
|
|
usba_ep_disable(&ep->ep);
|
|
spin_lock(&udc->lock);
|
|
}
|
|
}
|
|
}
|
|
|
|
static struct usba_ep *get_ep_by_addr(struct usba_udc *udc, u16 wIndex)
|
|
{
|
|
struct usba_ep *ep;
|
|
|
|
if ((wIndex & USB_ENDPOINT_NUMBER_MASK) == 0)
|
|
return to_usba_ep(udc->gadget.ep0);
|
|
|
|
list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) {
|
|
u8 bEndpointAddress;
|
|
|
|
if (!ep->desc)
|
|
continue;
|
|
bEndpointAddress = ep->desc->bEndpointAddress;
|
|
if ((wIndex ^ bEndpointAddress) & USB_DIR_IN)
|
|
continue;
|
|
if ((bEndpointAddress & USB_ENDPOINT_NUMBER_MASK)
|
|
== (wIndex & USB_ENDPOINT_NUMBER_MASK))
|
|
return ep;
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
/* Called with interrupts disabled and udc->lock held */
|
|
static inline void set_protocol_stall(struct usba_udc *udc, struct usba_ep *ep)
|
|
{
|
|
usba_ep_writel(ep, SET_STA, USBA_FORCE_STALL);
|
|
ep->state = WAIT_FOR_SETUP;
|
|
}
|
|
|
|
static inline int is_stalled(struct usba_udc *udc, struct usba_ep *ep)
|
|
{
|
|
if (usba_ep_readl(ep, STA) & USBA_FORCE_STALL)
|
|
return 1;
|
|
return 0;
|
|
}
|
|
|
|
static inline void set_address(struct usba_udc *udc, unsigned int addr)
|
|
{
|
|
u32 regval;
|
|
|
|
DBG(DBG_BUS, "setting address %u...\n", addr);
|
|
regval = usba_readl(udc, CTRL);
|
|
regval = USBA_BFINS(DEV_ADDR, addr, regval);
|
|
usba_writel(udc, CTRL, regval);
|
|
}
|
|
|
|
static int do_test_mode(struct usba_udc *udc)
|
|
{
|
|
static const char test_packet_buffer[] = {
|
|
/* JKJKJKJK * 9 */
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
/* JJKKJJKK * 8 */
|
|
0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA,
|
|
/* JJKKJJKK * 8 */
|
|
0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE,
|
|
/* JJJJJJJKKKKKKK * 8 */
|
|
0xFE, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
|
|
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
|
|
/* JJJJJJJK * 8 */
|
|
0x7F, 0xBF, 0xDF, 0xEF, 0xF7, 0xFB, 0xFD,
|
|
/* {JKKKKKKK * 10}, JK */
|
|
0xFC, 0x7E, 0xBF, 0xDF, 0xEF, 0xF7, 0xFB, 0xFD, 0x7E
|
|
};
|
|
struct usba_ep *ep;
|
|
int test_mode;
|
|
|
|
test_mode = udc->test_mode;
|
|
|
|
/* Start from a clean slate */
|
|
reset_all_endpoints(udc);
|
|
|
|
switch (test_mode) {
|
|
case 0x0100:
|
|
/* Test_J */
|
|
usba_writel(udc, TST, USBA_TST_J_MODE);
|
|
DBG(DBG_ALL, "Entering Test_J mode...\n");
|
|
break;
|
|
case 0x0200:
|
|
/* Test_K */
|
|
usba_writel(udc, TST, USBA_TST_K_MODE);
|
|
DBG(DBG_ALL, "Entering Test_K mode...\n");
|
|
break;
|
|
case 0x0300:
|
|
/*
|
|
* Test_SE0_NAK: Force high-speed mode and set up ep0
|
|
* for Bulk IN transfers
|
|
*/
|
|
ep = &udc->usba_ep[0];
|
|
usba_writel(udc, TST,
|
|
USBA_BF(SPEED_CFG, USBA_SPEED_CFG_FORCE_HIGH));
|
|
usba_ep_writel(ep, CFG,
|
|
USBA_BF(EPT_SIZE, USBA_EPT_SIZE_64)
|
|
| USBA_EPT_DIR_IN
|
|
| USBA_BF(EPT_TYPE, USBA_EPT_TYPE_BULK)
|
|
| USBA_BF(BK_NUMBER, 1));
|
|
if (!(usba_ep_readl(ep, CFG) & USBA_EPT_MAPPED)) {
|
|
set_protocol_stall(udc, ep);
|
|
DBG(DBG_ALL, "Test_SE0_NAK: ep0 not mapped\n");
|
|
} else {
|
|
usba_ep_writel(ep, CTL_ENB, USBA_EPT_ENABLE);
|
|
DBG(DBG_ALL, "Entering Test_SE0_NAK mode...\n");
|
|
}
|
|
break;
|
|
case 0x0400:
|
|
/* Test_Packet */
|
|
ep = &udc->usba_ep[0];
|
|
usba_ep_writel(ep, CFG,
|
|
USBA_BF(EPT_SIZE, USBA_EPT_SIZE_64)
|
|
| USBA_EPT_DIR_IN
|
|
| USBA_BF(EPT_TYPE, USBA_EPT_TYPE_BULK)
|
|
| USBA_BF(BK_NUMBER, 1));
|
|
if (!(usba_ep_readl(ep, CFG) & USBA_EPT_MAPPED)) {
|
|
set_protocol_stall(udc, ep);
|
|
DBG(DBG_ALL, "Test_Packet: ep0 not mapped\n");
|
|
} else {
|
|
usba_ep_writel(ep, CTL_ENB, USBA_EPT_ENABLE);
|
|
usba_writel(udc, TST, USBA_TST_PKT_MODE);
|
|
memcpy(ep->fifo, test_packet_buffer,
|
|
sizeof(test_packet_buffer));
|
|
usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY);
|
|
DBG(DBG_ALL, "Entering Test_Packet mode...\n");
|
|
}
|
|
break;
|
|
default:
|
|
DBG(DBG_ERR, "Invalid test mode: 0x%04x\n", test_mode);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Avoid overly long expressions */
|
|
static inline bool feature_is_dev_remote_wakeup(struct usb_ctrlrequest *crq)
|
|
{
|
|
if (crq->wValue == cpu_to_le16(USB_DEVICE_REMOTE_WAKEUP))
|
|
return true;
|
|
return false;
|
|
}
|
|
|
|
static inline bool feature_is_dev_test_mode(struct usb_ctrlrequest *crq)
|
|
{
|
|
if (crq->wValue == cpu_to_le16(USB_DEVICE_TEST_MODE))
|
|
return true;
|
|
return false;
|
|
}
|
|
|
|
static inline bool feature_is_ep_halt(struct usb_ctrlrequest *crq)
|
|
{
|
|
if (crq->wValue == cpu_to_le16(USB_ENDPOINT_HALT))
|
|
return true;
|
|
return false;
|
|
}
|
|
|
|
static int handle_ep0_setup(struct usba_udc *udc, struct usba_ep *ep,
|
|
struct usb_ctrlrequest *crq)
|
|
{
|
|
int retval = 0;
|
|
|
|
switch (crq->bRequest) {
|
|
case USB_REQ_GET_STATUS: {
|
|
u16 status;
|
|
|
|
if (crq->bRequestType == (USB_DIR_IN | USB_RECIP_DEVICE)) {
|
|
status = cpu_to_le16(udc->devstatus);
|
|
} else if (crq->bRequestType
|
|
== (USB_DIR_IN | USB_RECIP_INTERFACE)) {
|
|
status = cpu_to_le16(0);
|
|
} else if (crq->bRequestType
|
|
== (USB_DIR_IN | USB_RECIP_ENDPOINT)) {
|
|
struct usba_ep *target;
|
|
|
|
target = get_ep_by_addr(udc, le16_to_cpu(crq->wIndex));
|
|
if (!target)
|
|
goto stall;
|
|
|
|
status = 0;
|
|
if (is_stalled(udc, target))
|
|
status |= cpu_to_le16(1);
|
|
} else {
|
|
goto delegate;
|
|
}
|
|
|
|
/* Write directly to the FIFO. No queueing is done. */
|
|
if (crq->wLength != cpu_to_le16(sizeof(status)))
|
|
goto stall;
|
|
ep->state = DATA_STAGE_IN;
|
|
__raw_writew(status, ep->fifo);
|
|
usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY);
|
|
break;
|
|
}
|
|
|
|
case USB_REQ_CLEAR_FEATURE: {
|
|
if (crq->bRequestType == USB_RECIP_DEVICE) {
|
|
if (feature_is_dev_remote_wakeup(crq))
|
|
udc->devstatus
|
|
&= ~(1 << USB_DEVICE_REMOTE_WAKEUP);
|
|
else
|
|
/* Can't CLEAR_FEATURE TEST_MODE */
|
|
goto stall;
|
|
} else if (crq->bRequestType == USB_RECIP_ENDPOINT) {
|
|
struct usba_ep *target;
|
|
|
|
if (crq->wLength != cpu_to_le16(0) ||
|
|
!feature_is_ep_halt(crq))
|
|
goto stall;
|
|
target = get_ep_by_addr(udc, le16_to_cpu(crq->wIndex));
|
|
if (!target)
|
|
goto stall;
|
|
|
|
usba_ep_writel(target, CLR_STA, USBA_FORCE_STALL);
|
|
if (target->index != 0)
|
|
usba_ep_writel(target, CLR_STA,
|
|
USBA_TOGGLE_CLR);
|
|
} else {
|
|
goto delegate;
|
|
}
|
|
|
|
send_status(udc, ep);
|
|
break;
|
|
}
|
|
|
|
case USB_REQ_SET_FEATURE: {
|
|
if (crq->bRequestType == USB_RECIP_DEVICE) {
|
|
if (feature_is_dev_test_mode(crq)) {
|
|
send_status(udc, ep);
|
|
ep->state = STATUS_STAGE_TEST;
|
|
udc->test_mode = le16_to_cpu(crq->wIndex);
|
|
return 0;
|
|
} else if (feature_is_dev_remote_wakeup(crq)) {
|
|
udc->devstatus |= 1 << USB_DEVICE_REMOTE_WAKEUP;
|
|
} else {
|
|
goto stall;
|
|
}
|
|
} else if (crq->bRequestType == USB_RECIP_ENDPOINT) {
|
|
struct usba_ep *target;
|
|
|
|
if (crq->wLength != cpu_to_le16(0) ||
|
|
!feature_is_ep_halt(crq))
|
|
goto stall;
|
|
|
|
target = get_ep_by_addr(udc, le16_to_cpu(crq->wIndex));
|
|
if (!target)
|
|
goto stall;
|
|
|
|
usba_ep_writel(target, SET_STA, USBA_FORCE_STALL);
|
|
} else {
|
|
goto delegate;
|
|
}
|
|
|
|
send_status(udc, ep);
|
|
break;
|
|
}
|
|
|
|
case USB_REQ_SET_ADDRESS:
|
|
if (crq->bRequestType != (USB_DIR_OUT | USB_RECIP_DEVICE))
|
|
goto delegate;
|
|
|
|
set_address(udc, le16_to_cpu(crq->wValue));
|
|
send_status(udc, ep);
|
|
ep->state = STATUS_STAGE_ADDR;
|
|
break;
|
|
|
|
default:
|
|
delegate:
|
|
spin_unlock(&udc->lock);
|
|
retval = udc->driver->setup(&udc->gadget, crq);
|
|
spin_lock(&udc->lock);
|
|
}
|
|
|
|
return retval;
|
|
|
|
stall:
|
|
DBG(DBG_ALL, "%s: Invalid setup request: %02x.%02x v%04x i%04x l%d\n",
|
|
ep->ep.name, crq->bRequestType, crq->bRequest,
|
|
le16_to_cpu(crq->wValue), le16_to_cpu(crq->wIndex),
|
|
le16_to_cpu(crq->wLength));
|
|
set_protocol_stall(udc, ep);
|
|
|
|
return -1;
|
|
}
|
|
|
|
static void usba_control_irq(struct usba_udc *udc, struct usba_ep *ep)
|
|
{
|
|
struct usba_request *req;
|
|
u32 epstatus;
|
|
u32 epctrl;
|
|
|
|
restart:
|
|
epstatus = usba_ep_readl(ep, STA);
|
|
epctrl = usba_ep_readl(ep, CTL);
|
|
|
|
DBG(DBG_INT, "%s [%d]: s/%08x c/%08x\n",
|
|
ep->ep.name, ep->state, epstatus, epctrl);
|
|
|
|
req = NULL;
|
|
if (!list_empty(&ep->queue))
|
|
req = list_entry(ep->queue.next,
|
|
struct usba_request, queue);
|
|
|
|
if ((epctrl & USBA_TX_PK_RDY) && !(epstatus & USBA_TX_PK_RDY)) {
|
|
if (req->submitted)
|
|
next_fifo_transaction(ep, req);
|
|
else
|
|
submit_request(ep, req);
|
|
|
|
if (req->last_transaction) {
|
|
usba_ep_writel(ep, CTL_DIS, USBA_TX_PK_RDY);
|
|
usba_ep_writel(ep, CTL_ENB, USBA_TX_COMPLETE);
|
|
}
|
|
goto restart;
|
|
}
|
|
if ((epstatus & epctrl) & USBA_TX_COMPLETE) {
|
|
usba_ep_writel(ep, CLR_STA, USBA_TX_COMPLETE);
|
|
|
|
switch (ep->state) {
|
|
case DATA_STAGE_IN:
|
|
usba_ep_writel(ep, CTL_ENB, USBA_RX_BK_RDY);
|
|
usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE);
|
|
ep->state = STATUS_STAGE_OUT;
|
|
break;
|
|
case STATUS_STAGE_ADDR:
|
|
/* Activate our new address */
|
|
usba_writel(udc, CTRL, (usba_readl(udc, CTRL)
|
|
| USBA_FADDR_EN));
|
|
usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE);
|
|
ep->state = WAIT_FOR_SETUP;
|
|
break;
|
|
case STATUS_STAGE_IN:
|
|
if (req) {
|
|
list_del_init(&req->queue);
|
|
request_complete(ep, req, 0);
|
|
submit_next_request(ep);
|
|
}
|
|
usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE);
|
|
ep->state = WAIT_FOR_SETUP;
|
|
break;
|
|
case STATUS_STAGE_TEST:
|
|
usba_ep_writel(ep, CTL_DIS, USBA_TX_COMPLETE);
|
|
ep->state = WAIT_FOR_SETUP;
|
|
if (do_test_mode(udc))
|
|
set_protocol_stall(udc, ep);
|
|
break;
|
|
default:
|
|
DBG(DBG_ALL, "%s: TXCOMP: Invalid endpoint state %d\n",
|
|
ep->ep.name, ep->state);
|
|
set_protocol_stall(udc, ep);
|
|
break;
|
|
}
|
|
|
|
goto restart;
|
|
}
|
|
if ((epstatus & epctrl) & USBA_RX_BK_RDY) {
|
|
switch (ep->state) {
|
|
case STATUS_STAGE_OUT:
|
|
usba_ep_writel(ep, CLR_STA, USBA_RX_BK_RDY);
|
|
usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY);
|
|
|
|
if (req) {
|
|
list_del_init(&req->queue);
|
|
request_complete(ep, req, 0);
|
|
}
|
|
ep->state = WAIT_FOR_SETUP;
|
|
break;
|
|
|
|
case DATA_STAGE_OUT:
|
|
receive_data(ep);
|
|
break;
|
|
|
|
default:
|
|
usba_ep_writel(ep, CLR_STA, USBA_RX_BK_RDY);
|
|
usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY);
|
|
DBG(DBG_ALL, "%s: RXRDY: Invalid endpoint state %d\n",
|
|
ep->ep.name, ep->state);
|
|
set_protocol_stall(udc, ep);
|
|
break;
|
|
}
|
|
|
|
goto restart;
|
|
}
|
|
if (epstatus & USBA_RX_SETUP) {
|
|
union {
|
|
struct usb_ctrlrequest crq;
|
|
unsigned long data[2];
|
|
} crq;
|
|
unsigned int pkt_len;
|
|
int ret;
|
|
|
|
if (ep->state != WAIT_FOR_SETUP) {
|
|
/*
|
|
* Didn't expect a SETUP packet at this
|
|
* point. Clean up any pending requests (which
|
|
* may be successful).
|
|
*/
|
|
int status = -EPROTO;
|
|
|
|
/*
|
|
* RXRDY and TXCOMP are dropped when SETUP
|
|
* packets arrive. Just pretend we received
|
|
* the status packet.
|
|
*/
|
|
if (ep->state == STATUS_STAGE_OUT ||
|
|
ep->state == STATUS_STAGE_IN) {
|
|
usba_ep_writel(ep, CTL_DIS, USBA_RX_BK_RDY);
|
|
status = 0;
|
|
}
|
|
|
|
if (req) {
|
|
list_del_init(&req->queue);
|
|
request_complete(ep, req, status);
|
|
}
|
|
}
|
|
|
|
pkt_len = USBA_BFEXT(BYTE_COUNT, usba_ep_readl(ep, STA));
|
|
DBG(DBG_HW, "Packet length: %u\n", pkt_len);
|
|
if (pkt_len != sizeof(crq)) {
|
|
DBG(DBG_ALL, "udc: Invalid length %u (expected %zu)\n",
|
|
pkt_len, sizeof(crq));
|
|
set_protocol_stall(udc, ep);
|
|
return;
|
|
}
|
|
|
|
DBG(DBG_FIFO, "Copying ctrl request from 0x%p:\n", ep->fifo);
|
|
memcpy(crq.data, ep->fifo, sizeof(crq));
|
|
|
|
/* Free up one bank in the FIFO so that we can
|
|
* generate or receive a reply right away. */
|
|
usba_ep_writel(ep, CLR_STA, USBA_RX_SETUP);
|
|
|
|
if (crq.crq.bRequestType & USB_DIR_IN) {
|
|
/*
|
|
* The USB 2.0 spec states that "if wLength is
|
|
* zero, there is no data transfer phase."
|
|
* However, testusb #14 seems to actually
|
|
* expect a data phase even if wLength = 0...
|
|
*/
|
|
ep->state = DATA_STAGE_IN;
|
|
} else {
|
|
if (crq.crq.wLength != cpu_to_le16(0))
|
|
ep->state = DATA_STAGE_OUT;
|
|
else
|
|
ep->state = STATUS_STAGE_IN;
|
|
}
|
|
|
|
ret = -1;
|
|
if (ep->index == 0) {
|
|
ret = handle_ep0_setup(udc, ep, &crq.crq);
|
|
} else {
|
|
spin_unlock(&udc->lock);
|
|
ret = udc->driver->setup(&udc->gadget, &crq.crq);
|
|
spin_lock(&udc->lock);
|
|
}
|
|
|
|
DBG(DBG_BUS, "req %02x.%02x, length %d, state %d, ret %d\n",
|
|
crq.crq.bRequestType, crq.crq.bRequest,
|
|
le16_to_cpu(crq.crq.wLength), ep->state, ret);
|
|
|
|
if (ret < 0) {
|
|
/* Let the host know that we failed */
|
|
set_protocol_stall(udc, ep);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void usba_ep_irq(struct usba_udc *udc, struct usba_ep *ep)
|
|
{
|
|
struct usba_request *req;
|
|
u32 epstatus;
|
|
u32 epctrl;
|
|
|
|
epstatus = usba_ep_readl(ep, STA);
|
|
epctrl = usba_ep_readl(ep, CTL);
|
|
|
|
DBG(DBG_INT, "%s: interrupt, status: 0x%08x\n", ep->ep.name, epstatus);
|
|
|
|
while ((epctrl & USBA_TX_PK_RDY) && !(epstatus & USBA_TX_PK_RDY)) {
|
|
DBG(DBG_BUS, "%s: TX PK ready\n", ep->ep.name);
|
|
|
|
if (list_empty(&ep->queue)) {
|
|
DBG(DBG_INT, "ep_irq: queue empty\n");
|
|
usba_ep_writel(ep, CTL_DIS, USBA_TX_PK_RDY);
|
|
return;
|
|
}
|
|
|
|
req = list_entry(ep->queue.next, struct usba_request, queue);
|
|
|
|
if (req->submitted)
|
|
next_fifo_transaction(ep, req);
|
|
else
|
|
submit_request(ep, req);
|
|
|
|
if (req->last_transaction) {
|
|
list_del_init(&req->queue);
|
|
submit_next_request(ep);
|
|
request_complete(ep, req, 0);
|
|
}
|
|
|
|
epstatus = usba_ep_readl(ep, STA);
|
|
epctrl = usba_ep_readl(ep, CTL);
|
|
}
|
|
|
|
if ((epstatus & epctrl) & USBA_RX_BK_RDY) {
|
|
DBG(DBG_BUS, "%s: RX data ready\n", ep->ep.name);
|
|
receive_data(ep);
|
|
}
|
|
}
|
|
|
|
static int usba_udc_irq(struct usba_udc *udc)
|
|
{
|
|
u32 status, ep_status;
|
|
|
|
spin_lock(&udc->lock);
|
|
|
|
status = usba_readl(udc, INT_STA);
|
|
DBG(DBG_INT, "irq, status=%#08x\n", status);
|
|
|
|
if (status & USBA_DET_SUSPEND) {
|
|
usba_writel(udc, INT_CLR, USBA_DET_SUSPEND);
|
|
DBG(DBG_BUS, "Suspend detected\n");
|
|
if (udc->gadget.speed != USB_SPEED_UNKNOWN &&
|
|
udc->driver && udc->driver->suspend) {
|
|
spin_unlock(&udc->lock);
|
|
udc->driver->suspend(&udc->gadget);
|
|
spin_lock(&udc->lock);
|
|
}
|
|
}
|
|
|
|
if (status & USBA_WAKE_UP) {
|
|
usba_writel(udc, INT_CLR, USBA_WAKE_UP);
|
|
DBG(DBG_BUS, "Wake Up CPU detected\n");
|
|
}
|
|
|
|
if (status & USBA_END_OF_RESUME) {
|
|
usba_writel(udc, INT_CLR, USBA_END_OF_RESUME);
|
|
DBG(DBG_BUS, "Resume detected\n");
|
|
if (udc->gadget.speed != USB_SPEED_UNKNOWN &&
|
|
udc->driver && udc->driver->resume) {
|
|
spin_unlock(&udc->lock);
|
|
udc->driver->resume(&udc->gadget);
|
|
spin_lock(&udc->lock);
|
|
}
|
|
}
|
|
|
|
ep_status = USBA_BFEXT(EPT_INT, status);
|
|
if (ep_status) {
|
|
int i;
|
|
|
|
for (i = 0; i < USBA_NR_ENDPOINTS; i++)
|
|
if (ep_status & (1 << i)) {
|
|
if (ep_is_control(&udc->usba_ep[i]))
|
|
usba_control_irq(udc, &udc->usba_ep[i]);
|
|
else
|
|
usba_ep_irq(udc, &udc->usba_ep[i]);
|
|
}
|
|
}
|
|
|
|
if (status & USBA_END_OF_RESET) {
|
|
struct usba_ep *ep0;
|
|
|
|
usba_writel(udc, INT_CLR, USBA_END_OF_RESET);
|
|
reset_all_endpoints(udc);
|
|
|
|
if (udc->gadget.speed != USB_SPEED_UNKNOWN &&
|
|
udc->driver->disconnect) {
|
|
udc->gadget.speed = USB_SPEED_UNKNOWN;
|
|
spin_unlock(&udc->lock);
|
|
udc->driver->disconnect(&udc->gadget);
|
|
spin_lock(&udc->lock);
|
|
}
|
|
|
|
if (status & USBA_HIGH_SPEED)
|
|
udc->gadget.speed = USB_SPEED_HIGH;
|
|
else
|
|
udc->gadget.speed = USB_SPEED_FULL;
|
|
|
|
ep0 = &udc->usba_ep[0];
|
|
ep0->desc = &usba_ep0_desc;
|
|
ep0->state = WAIT_FOR_SETUP;
|
|
usba_ep_writel(ep0, CFG,
|
|
(USBA_BF(EPT_SIZE, EP0_EPT_SIZE)
|
|
| USBA_BF(EPT_TYPE, USBA_EPT_TYPE_CONTROL)
|
|
| USBA_BF(BK_NUMBER, USBA_BK_NUMBER_ONE)));
|
|
usba_ep_writel(ep0, CTL_ENB,
|
|
USBA_EPT_ENABLE | USBA_RX_SETUP);
|
|
usba_writel(udc, INT_ENB,
|
|
(usba_readl(udc, INT_ENB)
|
|
| USBA_BF(EPT_INT, 1)
|
|
| USBA_DET_SUSPEND
|
|
| USBA_END_OF_RESUME));
|
|
|
|
/*
|
|
* Unclear why we hit this irregularly, e.g. in usbtest,
|
|
* but it's clearly harmless...
|
|
*/
|
|
if (!(usba_ep_readl(ep0, CFG) & USBA_EPT_MAPPED))
|
|
DBG(DBG_ALL, "ODD: EP0 configuration is invalid!\n");
|
|
}
|
|
|
|
spin_unlock(&udc->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int atmel_usba_start(struct usba_udc *udc)
|
|
{
|
|
udc->devstatus = 1 << USB_DEVICE_SELF_POWERED;
|
|
|
|
udc->vbus_prev = 0;
|
|
|
|
/* If Vbus is present, enable the controller and wait for reset */
|
|
if (vbus_is_present(udc) && udc->vbus_prev == 0) {
|
|
usba_writel(udc, CTRL, USBA_ENABLE_MASK);
|
|
usba_writel(udc, INT_ENB, USBA_END_OF_RESET);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int atmel_usba_stop(struct usba_udc *udc)
|
|
{
|
|
udc->gadget.speed = USB_SPEED_UNKNOWN;
|
|
reset_all_endpoints(udc);
|
|
|
|
/* This will also disable the DP pullup */
|
|
usba_writel(udc, CTRL, USBA_DISABLE_MASK);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct usba_udc controller = {
|
|
.regs = (unsigned *)ATMEL_BASE_UDPHS,
|
|
.fifo = (unsigned *)ATMEL_BASE_UDPHS_FIFO,
|
|
.gadget = {
|
|
.ops = &usba_udc_ops,
|
|
.ep_list = LIST_HEAD_INIT(controller.gadget.ep_list),
|
|
.speed = USB_SPEED_HIGH,
|
|
.is_dualspeed = 1,
|
|
.name = "atmel_usba_udc",
|
|
},
|
|
};
|
|
|
|
int usb_gadget_handle_interrupts(int index)
|
|
{
|
|
struct usba_udc *udc = &controller;
|
|
|
|
return usba_udc_irq(udc);
|
|
}
|
|
|
|
|
|
int usb_gadget_register_driver(struct usb_gadget_driver *driver)
|
|
{
|
|
struct usba_udc *udc = &controller;
|
|
int ret;
|
|
|
|
if (!driver || !driver->bind || !driver->setup) {
|
|
printf("bad paramter\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (udc->driver) {
|
|
printf("UDC already has a gadget driver\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
atmel_usba_start(udc);
|
|
|
|
udc->driver = driver;
|
|
|
|
ret = driver->bind(&udc->gadget);
|
|
if (ret) {
|
|
pr_err("driver->bind() returned %d\n", ret);
|
|
udc->driver = NULL;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
|
|
{
|
|
struct usba_udc *udc = &controller;
|
|
|
|
if (!driver || !driver->unbind || !driver->disconnect) {
|
|
pr_err("bad paramter\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
driver->disconnect(&udc->gadget);
|
|
driver->unbind(&udc->gadget);
|
|
udc->driver = NULL;
|
|
|
|
atmel_usba_stop(udc);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct usba_ep *usba_udc_pdata(struct usba_platform_data *pdata,
|
|
struct usba_udc *udc)
|
|
{
|
|
struct usba_ep *eps;
|
|
int i;
|
|
|
|
eps = malloc(sizeof(struct usba_ep) * pdata->num_ep);
|
|
if (!eps) {
|
|
pr_err("failed to alloc eps\n");
|
|
return NULL;
|
|
}
|
|
|
|
udc->gadget.ep0 = &eps[0].ep;
|
|
|
|
INIT_LIST_HEAD(&udc->gadget.ep_list);
|
|
INIT_LIST_HEAD(&eps[0].ep.ep_list);
|
|
|
|
for (i = 0; i < pdata->num_ep; i++) {
|
|
struct usba_ep *ep = &eps[i];
|
|
|
|
ep->ep_regs = udc->regs + USBA_EPT_BASE(i);
|
|
ep->dma_regs = udc->regs + USBA_DMA_BASE(i);
|
|
ep->fifo = udc->fifo + USBA_FIFO_BASE(i);
|
|
ep->ep.ops = &usba_ep_ops;
|
|
ep->ep.name = pdata->ep[i].name;
|
|
ep->ep.maxpacket = pdata->ep[i].fifo_size;
|
|
ep->fifo_size = ep->ep.maxpacket;
|
|
ep->udc = udc;
|
|
INIT_LIST_HEAD(&ep->queue);
|
|
ep->nr_banks = pdata->ep[i].nr_banks;
|
|
ep->index = pdata->ep[i].index;
|
|
ep->can_dma = pdata->ep[i].can_dma;
|
|
ep->can_isoc = pdata->ep[i].can_isoc;
|
|
if (i)
|
|
list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
|
|
};
|
|
|
|
return eps;
|
|
}
|
|
|
|
int usba_udc_probe(struct usba_platform_data *pdata)
|
|
{
|
|
struct usba_udc *udc;
|
|
|
|
udc = &controller;
|
|
|
|
udc->usba_ep = usba_udc_pdata(pdata, udc);
|
|
|
|
return 0;
|
|
}
|