mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-17 07:28:51 +09:00
![Simon Glass](/assets/img/avatar_default.png)
Move env_get() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>
486 lines
11 KiB
C
486 lines
11 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2007
|
|
* DENX Software Engineering, Anatolij Gustschin, agust@denx.de
|
|
*/
|
|
|
|
/*
|
|
* mb862xx.c - Graphic interface for Fujitsu CoralP/Lime
|
|
* PCI and video mode code was derived from smiLynxEM driver.
|
|
*/
|
|
|
|
#include <common.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <env.h>
|
|
#include <pci.h>
|
|
#include <video_fb.h>
|
|
#include "videomodes.h"
|
|
#include <mb862xx.h>
|
|
|
|
#if defined(CONFIG_POST)
|
|
#include <post.h>
|
|
#endif
|
|
|
|
/*
|
|
* Graphic Device
|
|
*/
|
|
GraphicDevice mb862xx;
|
|
|
|
/*
|
|
* 32MB external RAM - 256K Chip MMIO = 0x1FC0000 ;
|
|
*/
|
|
#define VIDEO_MEM_SIZE 0x01FC0000
|
|
|
|
#if defined(CONFIG_PCI)
|
|
#if defined(CONFIG_VIDEO_CORALP)
|
|
|
|
static struct pci_device_id supported[] = {
|
|
{ PCI_VENDOR_ID_FUJITSU, PCI_DEVICE_ID_CORAL_P },
|
|
{ PCI_VENDOR_ID_FUJITSU, PCI_DEVICE_ID_CORAL_PA },
|
|
{ }
|
|
};
|
|
|
|
/* Internal clock frequency divider table, index is mode number */
|
|
unsigned int fr_div[] = { 0x00000f00, 0x00000900, 0x00000500 };
|
|
#endif
|
|
#endif
|
|
|
|
#if defined(CONFIG_VIDEO_CORALP)
|
|
#define rd_io in32r
|
|
#define wr_io out32r
|
|
#else
|
|
#define rd_io(addr) in_be32((volatile unsigned *)(addr))
|
|
#define wr_io(addr, val) out_be32((volatile unsigned *)(addr), (val))
|
|
#endif
|
|
|
|
#define HOST_RD_REG(off) rd_io((dev->frameAdrs + GC_HOST_BASE + (off)))
|
|
#define HOST_WR_REG(off, val) wr_io((dev->frameAdrs + GC_HOST_BASE + (off)), \
|
|
(val))
|
|
#define DISP_RD_REG(off) rd_io((dev->frameAdrs + GC_DISP_BASE + (off)))
|
|
#define DISP_WR_REG(off, val) wr_io((dev->frameAdrs + GC_DISP_BASE + (off)), \
|
|
(val))
|
|
#define DE_RD_REG(off) rd_io((dev->dprBase + (off)))
|
|
#define DE_WR_REG(off, val) wr_io((dev->dprBase + (off)), (val))
|
|
|
|
#if defined(CONFIG_VIDEO_CORALP)
|
|
#define DE_WR_FIFO(val) wr_io((dev->dprBase + (GC_GEO_FIFO)), (val))
|
|
#else
|
|
#define DE_WR_FIFO(val) wr_io((dev->dprBase + (GC_FIFO)), (val))
|
|
#endif
|
|
|
|
#define L0PAL_WR_REG(idx, val) wr_io((dev->frameAdrs + \
|
|
(GC_DISP_BASE | GC_L0PAL0) + \
|
|
((idx) << 2)), (val))
|
|
|
|
#if defined(CONFIG_VIDEO_MB862xx_ACCEL)
|
|
static void gdc_sw_reset (void)
|
|
{
|
|
GraphicDevice *dev = &mb862xx;
|
|
|
|
HOST_WR_REG (GC_SRST, 0x1);
|
|
udelay (500);
|
|
video_hw_init ();
|
|
}
|
|
|
|
|
|
static void de_wait (void)
|
|
{
|
|
GraphicDevice *dev = &mb862xx;
|
|
int lc = 0x10000;
|
|
|
|
/*
|
|
* Sync with software writes to framebuffer,
|
|
* try to reset if engine locked
|
|
*/
|
|
while (DE_RD_REG (GC_CTR) & 0x00000131)
|
|
if (lc-- < 0) {
|
|
gdc_sw_reset ();
|
|
puts ("gdc reset done after drawing engine lock.\n");
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void de_wait_slots (int slots)
|
|
{
|
|
GraphicDevice *dev = &mb862xx;
|
|
int lc = 0x10000;
|
|
|
|
/* Wait for free fifo slots */
|
|
while (DE_RD_REG (GC_IFCNT) < slots)
|
|
if (lc-- < 0) {
|
|
gdc_sw_reset ();
|
|
puts ("gdc reset done after drawing engine lock.\n");
|
|
break;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
#if !defined(CONFIG_VIDEO_CORALP)
|
|
static void board_disp_init (void)
|
|
{
|
|
GraphicDevice *dev = &mb862xx;
|
|
const gdc_regs *regs = board_get_regs ();
|
|
|
|
while (regs->index) {
|
|
DISP_WR_REG (regs->index, regs->value);
|
|
regs++;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* Init drawing engine if accel enabled.
|
|
* Also clears visible framebuffer.
|
|
*/
|
|
static void de_init (void)
|
|
{
|
|
GraphicDevice *dev = &mb862xx;
|
|
#if defined(CONFIG_VIDEO_MB862xx_ACCEL)
|
|
int cf = (dev->gdfBytesPP == 1) ? 0x0000 : 0x8000;
|
|
|
|
dev->dprBase = dev->frameAdrs + GC_DRAW_BASE;
|
|
|
|
/* Setup mode and fbbase, xres, fg, bg */
|
|
de_wait_slots (2);
|
|
DE_WR_FIFO (0xf1010108);
|
|
DE_WR_FIFO (cf | 0x0300);
|
|
DE_WR_REG (GC_FBR, 0x0);
|
|
DE_WR_REG (GC_XRES, dev->winSizeX);
|
|
DE_WR_REG (GC_FC, 0x0);
|
|
DE_WR_REG (GC_BC, 0x0);
|
|
/* Reset clipping */
|
|
DE_WR_REG (GC_CXMIN, 0x0);
|
|
DE_WR_REG (GC_CXMAX, dev->winSizeX);
|
|
DE_WR_REG (GC_CYMIN, 0x0);
|
|
DE_WR_REG (GC_CYMAX, dev->winSizeY);
|
|
|
|
/* Clear framebuffer using drawing engine */
|
|
de_wait_slots (3);
|
|
DE_WR_FIFO (0x09410000);
|
|
DE_WR_FIFO (0x00000000);
|
|
DE_WR_FIFO (dev->winSizeY << 16 | dev->winSizeX);
|
|
/* sync with SW access to framebuffer */
|
|
de_wait ();
|
|
#else
|
|
unsigned int i, *p;
|
|
|
|
i = dev->winSizeX * dev->winSizeY;
|
|
p = (unsigned int *)dev->frameAdrs;
|
|
while (i--)
|
|
*p++ = 0;
|
|
#endif
|
|
}
|
|
|
|
#if defined(CONFIG_VIDEO_CORALP)
|
|
/* use CCF and MMR parameters for Coral-P Eval. Board as default */
|
|
#ifndef CONFIG_SYS_MB862xx_CCF
|
|
#define CONFIG_SYS_MB862xx_CCF 0x00090000
|
|
#endif
|
|
#ifndef CONFIG_SYS_MB862xx_MMR
|
|
#define CONFIG_SYS_MB862xx_MMR 0x11d7fa13
|
|
#endif
|
|
|
|
unsigned int pci_video_init (void)
|
|
{
|
|
GraphicDevice *dev = &mb862xx;
|
|
pci_dev_t devbusfn;
|
|
u16 device;
|
|
|
|
if ((devbusfn = pci_find_devices (supported, 0)) < 0) {
|
|
puts("controller not present\n");
|
|
return 0;
|
|
}
|
|
|
|
/* PCI setup */
|
|
pci_write_config_dword (devbusfn, PCI_COMMAND,
|
|
(PCI_COMMAND_MEMORY | PCI_COMMAND_IO));
|
|
pci_read_config_dword (devbusfn, PCI_BASE_ADDRESS_0, &dev->frameAdrs);
|
|
dev->frameAdrs = pci_mem_to_phys (devbusfn, dev->frameAdrs);
|
|
|
|
if (dev->frameAdrs == 0) {
|
|
puts ("PCI config: failed to get base address\n");
|
|
return 0;
|
|
}
|
|
|
|
dev->pciBase = dev->frameAdrs;
|
|
|
|
puts("Coral-");
|
|
|
|
pci_read_config_word(devbusfn, PCI_DEVICE_ID, &device);
|
|
switch (device) {
|
|
case PCI_DEVICE_ID_CORAL_P:
|
|
puts("P\n");
|
|
break;
|
|
case PCI_DEVICE_ID_CORAL_PA:
|
|
puts("PA\n");
|
|
break;
|
|
default:
|
|
puts("Unknown\n");
|
|
return 0;
|
|
}
|
|
|
|
/* Setup clocks and memory mode for Coral-P(A) */
|
|
HOST_WR_REG(GC_CCF, CONFIG_SYS_MB862xx_CCF);
|
|
udelay (200);
|
|
HOST_WR_REG(GC_MMR, CONFIG_SYS_MB862xx_MMR);
|
|
udelay (100);
|
|
return dev->frameAdrs;
|
|
}
|
|
|
|
unsigned int card_init (void)
|
|
{
|
|
GraphicDevice *dev = &mb862xx;
|
|
unsigned int cf, videomode, div = 0;
|
|
unsigned long t1, hsync, vsync;
|
|
char *penv;
|
|
int tmp, i, bpp;
|
|
struct ctfb_res_modes *res_mode;
|
|
struct ctfb_res_modes var_mode;
|
|
|
|
memset (dev, 0, sizeof (GraphicDevice));
|
|
|
|
if (!pci_video_init ())
|
|
return 0;
|
|
|
|
tmp = 0;
|
|
videomode = 0x310;
|
|
/* get video mode via environment */
|
|
penv = env_get("videomode");
|
|
if (penv) {
|
|
/* decide if it is a string */
|
|
if (penv[0] <= '9') {
|
|
videomode = (int) simple_strtoul (penv, NULL, 16);
|
|
tmp = 1;
|
|
}
|
|
} else {
|
|
tmp = 1;
|
|
}
|
|
|
|
if (tmp) {
|
|
/* parameter are vesa modes, search params */
|
|
for (i = 0; i < VESA_MODES_COUNT; i++) {
|
|
if (vesa_modes[i].vesanr == videomode)
|
|
break;
|
|
}
|
|
if (i == VESA_MODES_COUNT) {
|
|
printf ("\tno VESA Mode found, fallback to mode 0x%x\n",
|
|
videomode);
|
|
i = 0;
|
|
}
|
|
res_mode = (struct ctfb_res_modes *)
|
|
&res_mode_init[vesa_modes[i].resindex];
|
|
if (vesa_modes[i].resindex > 2) {
|
|
puts ("\tUnsupported resolution, using default\n");
|
|
bpp = vesa_modes[1].bits_per_pixel;
|
|
div = fr_div[1];
|
|
}
|
|
bpp = vesa_modes[i].bits_per_pixel;
|
|
div = fr_div[vesa_modes[i].resindex];
|
|
} else {
|
|
res_mode = (struct ctfb_res_modes *) &var_mode;
|
|
bpp = video_get_params (res_mode, penv);
|
|
}
|
|
|
|
/* calculate hsync and vsync freq (info only) */
|
|
t1 = (res_mode->left_margin + res_mode->xres +
|
|
res_mode->right_margin + res_mode->hsync_len) / 8;
|
|
t1 *= 8;
|
|
t1 *= res_mode->pixclock;
|
|
t1 /= 1000;
|
|
hsync = 1000000000L / t1;
|
|
t1 *= (res_mode->upper_margin + res_mode->yres +
|
|
res_mode->lower_margin + res_mode->vsync_len);
|
|
t1 /= 1000;
|
|
vsync = 1000000000L / t1;
|
|
|
|
/* fill in Graphic device struct */
|
|
sprintf (dev->modeIdent, "%dx%dx%d %ldkHz %ldHz", res_mode->xres,
|
|
res_mode->yres, bpp, (hsync / 1000), (vsync / 1000));
|
|
printf ("\t%s\n", dev->modeIdent);
|
|
dev->winSizeX = res_mode->xres;
|
|
dev->winSizeY = res_mode->yres;
|
|
dev->memSize = VIDEO_MEM_SIZE;
|
|
|
|
switch (bpp) {
|
|
case 8:
|
|
dev->gdfIndex = GDF__8BIT_INDEX;
|
|
dev->gdfBytesPP = 1;
|
|
break;
|
|
case 15:
|
|
case 16:
|
|
dev->gdfIndex = GDF_15BIT_555RGB;
|
|
dev->gdfBytesPP = 2;
|
|
break;
|
|
default:
|
|
printf ("\t%d bpp configured, but only 8,15 and 16 supported\n",
|
|
bpp);
|
|
puts ("\tfallback to 15bpp\n");
|
|
dev->gdfIndex = GDF_15BIT_555RGB;
|
|
dev->gdfBytesPP = 2;
|
|
}
|
|
|
|
/* Setup dot clock (internal pll, division rate) */
|
|
DISP_WR_REG (GC_DCM1, div);
|
|
/* L0 init */
|
|
cf = (dev->gdfBytesPP == 1) ? 0x00000000 : 0x80000000;
|
|
DISP_WR_REG (GC_L0M, ((dev->winSizeX * dev->gdfBytesPP) / 64) << 16 |
|
|
(dev->winSizeY - 1) | cf);
|
|
DISP_WR_REG (GC_L0OA0, 0x0);
|
|
DISP_WR_REG (GC_L0DA0, 0x0);
|
|
DISP_WR_REG (GC_L0DY_L0DX, 0x0);
|
|
DISP_WR_REG (GC_L0EM, 0x0);
|
|
DISP_WR_REG (GC_L0WY_L0WX, 0x0);
|
|
DISP_WR_REG (GC_L0WH_L0WW, (dev->winSizeY - 1) << 16 | dev->winSizeX);
|
|
|
|
/* Display timing init */
|
|
DISP_WR_REG (GC_HTP_A, (dev->winSizeX +
|
|
res_mode->left_margin +
|
|
res_mode->right_margin +
|
|
res_mode->hsync_len - 1) << 16);
|
|
DISP_WR_REG (GC_HDB_HDP_A, (dev->winSizeX - 1) << 16 |
|
|
(dev->winSizeX - 1));
|
|
DISP_WR_REG (GC_VSW_HSW_HSP_A, (res_mode->vsync_len - 1) << 24 |
|
|
(res_mode->hsync_len - 1) << 16 |
|
|
(dev->winSizeX +
|
|
res_mode->right_margin - 1));
|
|
DISP_WR_REG (GC_VTR_A, (dev->winSizeY + res_mode->lower_margin +
|
|
res_mode->upper_margin +
|
|
res_mode->vsync_len - 1) << 16);
|
|
DISP_WR_REG (GC_VDP_VSP_A, (dev->winSizeY-1) << 16 |
|
|
(dev->winSizeY +
|
|
res_mode->lower_margin - 1));
|
|
DISP_WR_REG (GC_WY_WX, 0x0);
|
|
DISP_WR_REG (GC_WH_WW, dev->winSizeY << 16 | dev->winSizeX);
|
|
/* Display enable, L0 layer */
|
|
DISP_WR_REG (GC_DCM1, 0x80010000 | div);
|
|
|
|
return dev->frameAdrs;
|
|
}
|
|
#endif
|
|
|
|
|
|
#if !defined(CONFIG_VIDEO_CORALP)
|
|
int mb862xx_probe(unsigned int addr)
|
|
{
|
|
GraphicDevice *dev = &mb862xx;
|
|
unsigned int reg;
|
|
|
|
dev->frameAdrs = addr;
|
|
dev->dprBase = dev->frameAdrs + GC_DRAW_BASE;
|
|
|
|
/* Try to access GDC ID/Revision registers */
|
|
reg = HOST_RD_REG (GC_CID);
|
|
reg = HOST_RD_REG (GC_CID);
|
|
if (reg == 0x303) {
|
|
reg = DE_RD_REG(GC_REV);
|
|
reg = DE_RD_REG(GC_REV);
|
|
if ((reg & ~0xff) == 0x20050100)
|
|
return MB862XX_TYPE_LIME;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
void *video_hw_init (void)
|
|
{
|
|
GraphicDevice *dev = &mb862xx;
|
|
|
|
puts ("Video: Fujitsu ");
|
|
|
|
memset (dev, 0, sizeof (GraphicDevice));
|
|
|
|
#if defined(CONFIG_VIDEO_CORALP)
|
|
if (card_init () == 0)
|
|
return NULL;
|
|
#else
|
|
/*
|
|
* Preliminary init of the onboard graphic controller,
|
|
* retrieve base address
|
|
*/
|
|
if ((dev->frameAdrs = board_video_init ()) == 0) {
|
|
puts ("Controller not found!\n");
|
|
return NULL;
|
|
} else {
|
|
puts ("Lime\n");
|
|
|
|
/* Set Change of Clock Frequency Register */
|
|
HOST_WR_REG (GC_CCF, CONFIG_SYS_MB862xx_CCF);
|
|
/* Delay required */
|
|
udelay(300);
|
|
/* Set Memory I/F Mode Register) */
|
|
HOST_WR_REG (GC_MMR, CONFIG_SYS_MB862xx_MMR);
|
|
}
|
|
#endif
|
|
|
|
de_init ();
|
|
|
|
#if !defined(CONFIG_VIDEO_CORALP)
|
|
board_disp_init ();
|
|
#endif
|
|
|
|
#if (defined(CONFIG_LWMON5) || \
|
|
defined(CONFIG_SOCRATES)) && !(CONFIG_POST & CONFIG_SYS_POST_SYSMON)
|
|
/* Lamp on */
|
|
board_backlight_switch (1);
|
|
#endif
|
|
|
|
return dev;
|
|
}
|
|
|
|
/*
|
|
* Set a RGB color in the LUT
|
|
*/
|
|
void video_set_lut (unsigned int index, unsigned char r,
|
|
unsigned char g, unsigned char b)
|
|
{
|
|
GraphicDevice *dev = &mb862xx;
|
|
|
|
L0PAL_WR_REG (index, (r << 16) | (g << 8) | (b));
|
|
}
|
|
|
|
#if defined(CONFIG_VIDEO_MB862xx_ACCEL)
|
|
/*
|
|
* Drawing engine Fill and BitBlt screen region
|
|
*/
|
|
void video_hw_rectfill (unsigned int bpp, unsigned int dst_x,
|
|
unsigned int dst_y, unsigned int dim_x,
|
|
unsigned int dim_y, unsigned int color)
|
|
{
|
|
GraphicDevice *dev = &mb862xx;
|
|
|
|
de_wait_slots (3);
|
|
DE_WR_REG (GC_FC, color);
|
|
DE_WR_FIFO (0x09410000);
|
|
DE_WR_FIFO ((dst_y << 16) | dst_x);
|
|
DE_WR_FIFO ((dim_y << 16) | dim_x);
|
|
de_wait ();
|
|
}
|
|
|
|
void video_hw_bitblt (unsigned int bpp, unsigned int src_x,
|
|
unsigned int src_y, unsigned int dst_x,
|
|
unsigned int dst_y, unsigned int width,
|
|
unsigned int height)
|
|
{
|
|
GraphicDevice *dev = &mb862xx;
|
|
unsigned int ctrl = 0x0d000000L;
|
|
|
|
if (src_x >= dst_x && src_y >= dst_y)
|
|
ctrl |= 0x00440000L;
|
|
else if (src_x >= dst_x && src_y <= dst_y)
|
|
ctrl |= 0x00460000L;
|
|
else if (src_x <= dst_x && src_y >= dst_y)
|
|
ctrl |= 0x00450000L;
|
|
else
|
|
ctrl |= 0x00470000L;
|
|
|
|
de_wait_slots (4);
|
|
DE_WR_FIFO (ctrl);
|
|
DE_WR_FIFO ((src_y << 16) | src_x);
|
|
DE_WR_FIFO ((dst_y << 16) | dst_x);
|
|
DE_WR_FIFO ((height << 16) | width);
|
|
de_wait (); /* sync */
|
|
}
|
|
#endif
|