mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-20 08:58:52 +09:00
![Nikita Kiryanov](/assets/img/avatar_default.png)
Add option to set shell prompt string from menuconfig and migrate boards globally. The migration is done as follows: - Boards that explicitly and unconditionally set CONFIG_SYS_PROMPT had the entry moved to their defconfig files. - Boards that defined some kind of #ifdef logic which selects the CONFIG_SYS_PROMPT (for example qemu-mips) got an #undef CONFIG_SYS_PROMPT right before the #ifdef logic and were left alone. - This change forces CONFIG_SYS_PROMPT to be a per board decision, and thus CONFIG_SYS_PROMPT was removed from all <soc>_common.h and <arch>_common.h files. This results in a streamlined default value across platforms, and includes the following files: spear-common, sunxi-common, mv-common, ti_armv7_common, tegra-common, at91-sama5_common, and zynq-common. - Boards that relied on <arch/soc>_common.h values of CONFIG_SYS_PROMPT were not updated in their respective defconfig files under the assumption that since they did not explicitly define a value, they're fine with whatever the default is. - On the other hand, boards that relied on a value defined in some <boards>_common.h file such as woodburn_common, rpi-common, bur_am335x_common, ls2085a_common, siemens_am33x_common, and omap3_evm_common, had their values moved to the respective defconfig files. - The define V_PROMPT was removed, since it is not used anywhere except for assigning a value for CONFIG_SYS_PROMPT. Cc: Tom Rini <trini@konsulko.com> Cc: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> [trini: Add spring, sniper, smartweb to conversion] Signed-off-by: Tom Rini <trini@konsulko.com>
180 lines
4.1 KiB
C
180 lines
4.1 KiB
C
/*
|
|
* Copyright (C) 2011 Albert ARIBAUD <albert.u.boot@aribaud.net>
|
|
*
|
|
* Based on the netspace_v2 code which is
|
|
* Copyright (C) 2011 Simon Guinot <sguinot@lacie.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef _CONFIG_WIRELESS_SPACE_H
|
|
#define _CONFIG_WIRELESS_SPACE_H
|
|
|
|
/*
|
|
* Machine number definition
|
|
*/
|
|
#define MACH_TYPE_WIRELESS_SPACE 2500 /* is missing in mach-types.h */
|
|
#define CONFIG_MACH_TYPE MACH_TYPE_WIRELESS_SPACE
|
|
#define CONFIG_IDENT_STRING " Wireless Space"
|
|
|
|
/*
|
|
* High Level Configuration Options (easy to change)
|
|
*/
|
|
#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
|
|
/* SoC name */
|
|
#define CONFIG_KW88F6281
|
|
#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
|
|
|
|
/*
|
|
* Commands configuration
|
|
*/
|
|
#define CONFIG_SYS_NO_FLASH /* no NOR or SPI flash */
|
|
#define CONFIG_CMD_ENV
|
|
#define CONFIG_CMD_DHCP
|
|
#define CONFIG_CMD_PING
|
|
#define CONFIG_CMD_NAND
|
|
#define CONFIG_CMD_I2C
|
|
#define CONFIG_CMD_IDE
|
|
#define CONFIG_CMD_USB
|
|
|
|
/*
|
|
* Core clock definition
|
|
*/
|
|
#define CONFIG_SYS_TCLK 166000000 /* 166MHz */
|
|
|
|
/*
|
|
* SDRAM configuration
|
|
*/
|
|
#define CONFIG_NR_DRAM_BANKS 1
|
|
|
|
/*
|
|
* Different SDRAM configuration and size for some of the boards derived
|
|
* from the Network Space v2
|
|
*/
|
|
|
|
/*
|
|
* mv-common.h should be defined after CMD configs since it used them
|
|
* to enable certain macros
|
|
*/
|
|
#include "mv-common.h"
|
|
|
|
/* Remove or override few declarations from mv-common.h */
|
|
#undef CONFIG_RBTREE
|
|
#undef CONFIG_SYS_IDE_MAXBUS
|
|
#undef CONFIG_SYS_IDE_MAXDEVICE
|
|
#define CONFIG_SYS_IDE_MAXBUS 1
|
|
#define CONFIG_SYS_IDE_MAXDEVICE 1
|
|
|
|
/*
|
|
* Ethernet Driver configuration
|
|
*/
|
|
#ifdef CONFIG_CMD_NET
|
|
#define CONFIG_MISC_INIT_R /* misc_init_r() initializes MAC address */
|
|
#define CONFIG_MVGBE_PORTS {1, 0} /* enable only egiga0... */
|
|
#define PORT_SERIAL_CONTROL_VALUE 0x00A4260E /* ... tied to the switch... */
|
|
#define CONFIG_PHY_BASE_ADR 0xa /* ... through a 'fake' PHY */
|
|
#define CONFIG_MII
|
|
#undef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
|
|
#define CONFIG_NETCONSOLE
|
|
#define CONFIG_MV88E61XX_SWITCH
|
|
#define CONFIG_MV88E61XX_MULTICHIP_ADRMODE
|
|
#define CONFIG_MV88E61XX_CMD
|
|
#define CONFIG_CMD_TFTPPUT
|
|
#endif /* CONFIG_CMD_NET */
|
|
|
|
/*
|
|
* SATA Driver configuration
|
|
*/
|
|
#ifdef CONFIG_MVSATA_IDE
|
|
#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
|
|
#endif /* CONFIG_MVSATA_IDE */
|
|
|
|
/*
|
|
* Enable GPI0 support
|
|
*/
|
|
#define CONFIG_KIRKWOOD_GPIO
|
|
|
|
/*
|
|
* Enable I2C support
|
|
*/
|
|
#ifdef CONFIG_CMD_I2C
|
|
/* I2C EEPROM HT24LC04 (512B - 32 pages of 16 Bytes) */
|
|
#define CONFIG_CMD_EEPROM
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
|
|
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* 16-byte page size */
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* 8-bit device address */
|
|
#endif /* CONFIG_CMD_I2C */
|
|
|
|
/*
|
|
* Partition support
|
|
*/
|
|
#define CONFIG_DOS_PARTITION
|
|
#define CONFIG_EFI_PARTITION
|
|
|
|
/*
|
|
* File systems support
|
|
*/
|
|
#define CONFIG_CMD_EXT2
|
|
#define CONFIG_CMD_FAT
|
|
|
|
/*
|
|
* Use the HUSH parser
|
|
*/
|
|
#define CONFIG_SYS_HUSH_PARSER
|
|
|
|
/*
|
|
* Console configuration
|
|
*/
|
|
#define CONFIG_CONSOLE_MUX
|
|
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
|
|
|
|
/*
|
|
* Enable device tree support
|
|
*/
|
|
#define CONFIG_OF_LIBFDT
|
|
|
|
/*
|
|
* Environment variables configurations
|
|
*/
|
|
|
|
#define CONFIG_ENV_IS_IN_NAND
|
|
#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128KB */
|
|
#define CONFIG_ENV_SIZE 0x20000 /* 128KB */
|
|
#define CONFIG_ENV_OFFSET 0x80000 /* env starts here */
|
|
|
|
/*
|
|
* Board-specific command to make using buttons etc easier
|
|
*/
|
|
|
|
#define CONFIG_WIRELESS_SPACE_CMD
|
|
|
|
/*
|
|
* Default environment variables
|
|
*/
|
|
#define CONFIG_PREBOOT
|
|
|
|
#define CONFIG_BOOTARGS "console=ttyS0,115200"
|
|
|
|
#define CONFIG_BOOTCOMMAND \
|
|
"if run usbload || run diskload; then bootm; fi"
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"stdin=serial\0" \
|
|
"stdout=serial\0" \
|
|
"stderr=serial\0" \
|
|
"bootfile=uImage\0" \
|
|
"loadaddr=0x800000\0" \
|
|
"autoload=no\0" \
|
|
"netconsole=" \
|
|
"set stdin $stdin,nc; " \
|
|
"set stdout $stdout,nc; " \
|
|
"set stderr $stderr,nc;\0" \
|
|
"diskload=ide reset && " \
|
|
"ext2load ide 0:1 $loadaddr /boot/$bootfile\0" \
|
|
"usbload=usb start && " \
|
|
"fatload usb 0:1 $loadaddr /boot/$bootfile\0" \
|
|
"preboot=" \
|
|
"dhcp && run netconsole\0"
|
|
|
|
#endif /* _CONFIG_WIRELESS_SPACE_H */
|