mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-20 00:48:52 +09:00
![Stefan Roese](/assets/img/avatar_default.png)
As discussed on the list, move "arch/ppc" to "arch/powerpc" to better match the Linux directory structure. Please note that this patch also changes the "ppc" target in MAKEALL to "powerpc" to match this new infrastructure. But "ppc" is kept as an alias for now, to not break compatibility with scripts using this name. Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Wolfgang Denk <wd@denx.de> Acked-by: Detlev Zundel <dzu@denx.de> Acked-by: Kim Phillips <kim.phillips@freescale.com> Cc: Peter Tyser <ptyser@xes-inc.com> Cc: Anatolij Gustschin <agust@denx.de>
166 lines
5.6 KiB
C
166 lines
5.6 KiB
C
/*
|
|
* NS16550 Serial Port
|
|
* originally from linux source (arch/powerpc/boot/ns16550.h)
|
|
*
|
|
* Cleanup and unification
|
|
* (C) 2009 by Detlev Zundel, DENX Software Engineering GmbH
|
|
*
|
|
* modified slightly to
|
|
* have addresses as offsets from CONFIG_SYS_ISA_BASE
|
|
* added a few more definitions
|
|
* added prototypes for ns16550.c
|
|
* reduced no of com ports to 2
|
|
* modifications (c) Rob Taylor, Flying Pig Systems. 2000.
|
|
*
|
|
* added support for port on 64-bit bus
|
|
* by Richard Danter (richard.danter@windriver.com), (C) 2005 Wind River Systems
|
|
*/
|
|
|
|
/*
|
|
* Note that the following macro magic uses the fact that the compiler
|
|
* will not allocate storage for arrays of size 0
|
|
*/
|
|
|
|
#if !defined(CONFIG_SYS_NS16550_REG_SIZE) || (CONFIG_SYS_NS16550_REG_SIZE == 0)
|
|
#error "Please define NS16550 registers size."
|
|
#elif (CONFIG_SYS_NS16550_REG_SIZE > 0)
|
|
#define UART_REG(x) \
|
|
unsigned char prepad_##x[CONFIG_SYS_NS16550_REG_SIZE - 1]; \
|
|
unsigned char x;
|
|
#elif (CONFIG_SYS_NS16550_REG_SIZE < 0)
|
|
#define UART_REG(x) \
|
|
unsigned char x; \
|
|
unsigned char postpad_##x[-CONFIG_SYS_NS16550_REG_SIZE - 1];
|
|
#endif
|
|
|
|
struct NS16550 {
|
|
UART_REG(rbr); /* 0 */
|
|
UART_REG(ier); /* 1 */
|
|
UART_REG(fcr); /* 2 */
|
|
UART_REG(lcr); /* 3 */
|
|
UART_REG(mcr); /* 4 */
|
|
UART_REG(lsr); /* 5 */
|
|
UART_REG(msr); /* 6 */
|
|
UART_REG(spr); /* 7 */
|
|
UART_REG(mdr1); /* 8 */
|
|
UART_REG(reg9); /* 9 */
|
|
UART_REG(regA); /* A */
|
|
UART_REG(regB); /* B */
|
|
UART_REG(regC); /* C */
|
|
UART_REG(regD); /* D */
|
|
UART_REG(regE); /* E */
|
|
UART_REG(uasr); /* F */
|
|
UART_REG(scr); /* 10*/
|
|
UART_REG(ssr); /* 11*/
|
|
UART_REG(reg12); /* 12*/
|
|
UART_REG(osc_12m_sel); /* 13*/
|
|
};
|
|
|
|
#define thr rbr
|
|
#define iir fcr
|
|
#define dll rbr
|
|
#define dlm ier
|
|
|
|
typedef volatile struct NS16550 *NS16550_t;
|
|
|
|
/*
|
|
* These are the definitions for the FIFO Control Register
|
|
*/
|
|
#define UART_FCR_FIFO_EN 0x01 /* Fifo enable */
|
|
#define UART_FCR_CLEAR_RCVR 0x02 /* Clear the RCVR FIFO */
|
|
#define UART_FCR_CLEAR_XMIT 0x04 /* Clear the XMIT FIFO */
|
|
#define UART_FCR_DMA_SELECT 0x08 /* For DMA applications */
|
|
#define UART_FCR_TRIGGER_MASK 0xC0 /* Mask for the FIFO trigger range */
|
|
#define UART_FCR_TRIGGER_1 0x00 /* Mask for trigger set at 1 */
|
|
#define UART_FCR_TRIGGER_4 0x40 /* Mask for trigger set at 4 */
|
|
#define UART_FCR_TRIGGER_8 0x80 /* Mask for trigger set at 8 */
|
|
#define UART_FCR_TRIGGER_14 0xC0 /* Mask for trigger set at 14 */
|
|
|
|
#define UART_FCR_RXSR 0x02 /* Receiver soft reset */
|
|
#define UART_FCR_TXSR 0x04 /* Transmitter soft reset */
|
|
|
|
/*
|
|
* These are the definitions for the Modem Control Register
|
|
*/
|
|
#define UART_MCR_DTR 0x01 /* DTR */
|
|
#define UART_MCR_RTS 0x02 /* RTS */
|
|
#define UART_MCR_OUT1 0x04 /* Out 1 */
|
|
#define UART_MCR_OUT2 0x08 /* Out 2 */
|
|
#define UART_MCR_LOOP 0x10 /* Enable loopback test mode */
|
|
|
|
#define UART_MCR_DMA_EN 0x04
|
|
#define UART_MCR_TX_DFR 0x08
|
|
|
|
/*
|
|
* These are the definitions for the Line Control Register
|
|
*
|
|
* Note: if the word length is 5 bits (UART_LCR_WLEN5), then setting
|
|
* UART_LCR_STOP will select 1.5 stop bits, not 2 stop bits.
|
|
*/
|
|
#define UART_LCR_WLS_MSK 0x03 /* character length select mask */
|
|
#define UART_LCR_WLS_5 0x00 /* 5 bit character length */
|
|
#define UART_LCR_WLS_6 0x01 /* 6 bit character length */
|
|
#define UART_LCR_WLS_7 0x02 /* 7 bit character length */
|
|
#define UART_LCR_WLS_8 0x03 /* 8 bit character length */
|
|
#define UART_LCR_STB 0x04 /* Number of stop Bits, off = 1, on = 1.5 or 2) */
|
|
#define UART_LCR_PEN 0x08 /* Parity eneble */
|
|
#define UART_LCR_EPS 0x10 /* Even Parity Select */
|
|
#define UART_LCR_STKP 0x20 /* Stick Parity */
|
|
#define UART_LCR_SBRK 0x40 /* Set Break */
|
|
#define UART_LCR_BKSE 0x80 /* Bank select enable */
|
|
#define UART_LCR_DLAB 0x80 /* Divisor latch access bit */
|
|
|
|
/*
|
|
* These are the definitions for the Line Status Register
|
|
*/
|
|
#define UART_LSR_DR 0x01 /* Data ready */
|
|
#define UART_LSR_OE 0x02 /* Overrun */
|
|
#define UART_LSR_PE 0x04 /* Parity error */
|
|
#define UART_LSR_FE 0x08 /* Framing error */
|
|
#define UART_LSR_BI 0x10 /* Break */
|
|
#define UART_LSR_THRE 0x20 /* Xmit holding register empty */
|
|
#define UART_LSR_TEMT 0x40 /* Xmitter empty */
|
|
#define UART_LSR_ERR 0x80 /* Error */
|
|
|
|
#define UART_MSR_DCD 0x80 /* Data Carrier Detect */
|
|
#define UART_MSR_RI 0x40 /* Ring Indicator */
|
|
#define UART_MSR_DSR 0x20 /* Data Set Ready */
|
|
#define UART_MSR_CTS 0x10 /* Clear to Send */
|
|
#define UART_MSR_DDCD 0x08 /* Delta DCD */
|
|
#define UART_MSR_TERI 0x04 /* Trailing edge ring indicator */
|
|
#define UART_MSR_DDSR 0x02 /* Delta DSR */
|
|
#define UART_MSR_DCTS 0x01 /* Delta CTS */
|
|
|
|
/*
|
|
* These are the definitions for the Interrupt Identification Register
|
|
*/
|
|
#define UART_IIR_NO_INT 0x01 /* No interrupts pending */
|
|
#define UART_IIR_ID 0x06 /* Mask for the interrupt ID */
|
|
|
|
#define UART_IIR_MSI 0x00 /* Modem status interrupt */
|
|
#define UART_IIR_THRI 0x02 /* Transmitter holding register empty */
|
|
#define UART_IIR_RDI 0x04 /* Receiver data interrupt */
|
|
#define UART_IIR_RLSI 0x06 /* Receiver line status interrupt */
|
|
|
|
/*
|
|
* These are the definitions for the Interrupt Enable Register
|
|
*/
|
|
#define UART_IER_MSI 0x08 /* Enable Modem status interrupt */
|
|
#define UART_IER_RLSI 0x04 /* Enable receiver line status interrupt */
|
|
#define UART_IER_THRI 0x02 /* Enable Transmitter holding register int. */
|
|
#define UART_IER_RDI 0x01 /* Enable receiver data interrupt */
|
|
|
|
|
|
#ifdef CONFIG_OMAP1510
|
|
#define OSC_12M_SEL 0x01 /* selects 6.5 * current clk div */
|
|
#endif
|
|
|
|
/* useful defaults for LCR */
|
|
#define UART_LCR_8N1 0x03
|
|
|
|
void NS16550_init (NS16550_t com_port, int baud_divisor);
|
|
void NS16550_putc (NS16550_t com_port, char c);
|
|
char NS16550_getc (NS16550_t com_port);
|
|
int NS16550_tstc (NS16550_t com_port);
|
|
void NS16550_reinit (NS16550_t com_port, int baud_divisor);
|