mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-26 11:58:52 +09:00
![Tom Rini](/assets/img/avatar_default.png)
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
209 lines
7.8 KiB
C
209 lines
7.8 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Freescale i.MX28 GPMI Register Definitions
|
|
*
|
|
* Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
|
|
* on behalf of DENX Software Engineering GmbH
|
|
*
|
|
* Based on code from LTIB:
|
|
* Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
|
|
*/
|
|
|
|
#ifndef __MX28_REGS_GPMI_H__
|
|
#define __MX28_REGS_GPMI_H__
|
|
|
|
#include <asm/mach-imx/regs-common.h>
|
|
|
|
#ifndef __ASSEMBLY__
|
|
struct mxs_gpmi_regs {
|
|
mxs_reg_32(hw_gpmi_ctrl0)
|
|
mxs_reg_32(hw_gpmi_compare)
|
|
mxs_reg_32(hw_gpmi_eccctrl)
|
|
mxs_reg_32(hw_gpmi_ecccount)
|
|
mxs_reg_32(hw_gpmi_payload)
|
|
mxs_reg_32(hw_gpmi_auxiliary)
|
|
mxs_reg_32(hw_gpmi_ctrl1)
|
|
mxs_reg_32(hw_gpmi_timing0)
|
|
mxs_reg_32(hw_gpmi_timing1)
|
|
|
|
uint32_t reserved[4];
|
|
|
|
mxs_reg_32(hw_gpmi_data)
|
|
mxs_reg_32(hw_gpmi_stat)
|
|
mxs_reg_32(hw_gpmi_debug)
|
|
mxs_reg_32(hw_gpmi_version)
|
|
};
|
|
#endif
|
|
|
|
#define GPMI_CTRL0_SFTRST (1 << 31)
|
|
#define GPMI_CTRL0_CLKGATE (1 << 30)
|
|
#define GPMI_CTRL0_RUN (1 << 29)
|
|
#define GPMI_CTRL0_DEV_IRQ_EN (1 << 28)
|
|
#define GPMI_CTRL0_LOCK_CS (1 << 27)
|
|
#define GPMI_CTRL0_UDMA (1 << 26)
|
|
#define GPMI_CTRL0_COMMAND_MODE_MASK (0x3 << 24)
|
|
#define GPMI_CTRL0_COMMAND_MODE_OFFSET 24
|
|
#define GPMI_CTRL0_COMMAND_MODE_WRITE (0x0 << 24)
|
|
#define GPMI_CTRL0_COMMAND_MODE_READ (0x1 << 24)
|
|
#define GPMI_CTRL0_COMMAND_MODE_READ_AND_COMPARE (0x2 << 24)
|
|
#define GPMI_CTRL0_COMMAND_MODE_WAIT_FOR_READY (0x3 << 24)
|
|
#define GPMI_CTRL0_WORD_LENGTH (1 << 23)
|
|
#define GPMI_CTRL0_CS_MASK (0x7 << 20)
|
|
#define GPMI_CTRL0_CS_OFFSET 20
|
|
#define GPMI_CTRL0_ADDRESS_MASK (0x7 << 17)
|
|
#define GPMI_CTRL0_ADDRESS_OFFSET 17
|
|
#define GPMI_CTRL0_ADDRESS_NAND_DATA (0x0 << 17)
|
|
#define GPMI_CTRL0_ADDRESS_NAND_CLE (0x1 << 17)
|
|
#define GPMI_CTRL0_ADDRESS_NAND_ALE (0x2 << 17)
|
|
#define GPMI_CTRL0_ADDRESS_INCREMENT (1 << 16)
|
|
#define GPMI_CTRL0_XFER_COUNT_MASK 0xffff
|
|
#define GPMI_CTRL0_XFER_COUNT_OFFSET 0
|
|
|
|
#define GPMI_COMPARE_MASK_MASK (0xffff << 16)
|
|
#define GPMI_COMPARE_MASK_OFFSET 16
|
|
#define GPMI_COMPARE_REFERENCE_MASK 0xffff
|
|
#define GPMI_COMPARE_REFERENCE_OFFSET 0
|
|
|
|
#define GPMI_ECCCTRL_HANDLE_MASK (0xffff << 16)
|
|
#define GPMI_ECCCTRL_HANDLE_OFFSET 16
|
|
#define GPMI_ECCCTRL_ECC_CMD_MASK (0x3 << 13)
|
|
#define GPMI_ECCCTRL_ECC_CMD_OFFSET 13
|
|
#define GPMI_ECCCTRL_ECC_CMD_DECODE (0x0 << 13)
|
|
#define GPMI_ECCCTRL_ECC_CMD_ENCODE (0x1 << 13)
|
|
#define GPMI_ECCCTRL_ENABLE_ECC (1 << 12)
|
|
#define GPMI_ECCCTRL_BUFFER_MASK_MASK 0x1ff
|
|
#define GPMI_ECCCTRL_BUFFER_MASK_OFFSET 0
|
|
#define GPMI_ECCCTRL_BUFFER_MASK_BCH_AUXONLY 0x100
|
|
#define GPMI_ECCCTRL_BUFFER_MASK_BCH_PAGE 0x1ff
|
|
|
|
#define GPMI_ECCCOUNT_COUNT_MASK 0xffff
|
|
#define GPMI_ECCCOUNT_COUNT_OFFSET 0
|
|
|
|
#define GPMI_PAYLOAD_ADDRESS_MASK (0x3fffffff << 2)
|
|
#define GPMI_PAYLOAD_ADDRESS_OFFSET 2
|
|
|
|
#define GPMI_AUXILIARY_ADDRESS_MASK (0x3fffffff << 2)
|
|
#define GPMI_AUXILIARY_ADDRESS_OFFSET 2
|
|
|
|
#define GPMI_CTRL1_DECOUPLE_CS (1 << 24)
|
|
#define GPMI_CTRL1_WRN_DLY_SEL_MASK (0x3 << 22)
|
|
#define GPMI_CTRL1_WRN_DLY_SEL_OFFSET 22
|
|
#define GPMI_CTRL1_TIMEOUT_IRQ_EN (1 << 20)
|
|
#define GPMI_CTRL1_GANGED_RDYBUSY (1 << 19)
|
|
#define GPMI_CTRL1_BCH_MODE (1 << 18)
|
|
#define GPMI_CTRL1_DLL_ENABLE (1 << 17)
|
|
#define GPMI_CTRL1_HALF_PERIOD (1 << 16)
|
|
#define GPMI_CTRL1_RDN_DELAY_MASK (0xf << 12)
|
|
#define GPMI_CTRL1_RDN_DELAY_OFFSET 12
|
|
#define GPMI_CTRL1_DMA2ECC_MODE (1 << 11)
|
|
#define GPMI_CTRL1_DEV_IRQ (1 << 10)
|
|
#define GPMI_CTRL1_TIMEOUT_IRQ (1 << 9)
|
|
#define GPMI_CTRL1_BURST_EN (1 << 8)
|
|
#define GPMI_CTRL1_ABORT_WAIT_REQUEST (1 << 7)
|
|
#define GPMI_CTRL1_ABORT_WAIT_FOR_READY_CHANNEL_MASK (0x7 << 4)
|
|
#define GPMI_CTRL1_ABORT_WAIT_FOR_READY_CHANNEL_OFFSET 4
|
|
#define GPMI_CTRL1_DEV_RESET (1 << 3)
|
|
#define GPMI_CTRL1_ATA_IRQRDY_POLARITY (1 << 2)
|
|
#define GPMI_CTRL1_CAMERA_MODE (1 << 1)
|
|
#define GPMI_CTRL1_GPMI_MODE (1 << 0)
|
|
|
|
#define GPMI_TIMING0_ADDRESS_SETUP_MASK (0xff << 16)
|
|
#define GPMI_TIMING0_ADDRESS_SETUP_OFFSET 16
|
|
#define GPMI_TIMING0_DATA_HOLD_MASK (0xff << 8)
|
|
#define GPMI_TIMING0_DATA_HOLD_OFFSET 8
|
|
#define GPMI_TIMING0_DATA_SETUP_MASK 0xff
|
|
#define GPMI_TIMING0_DATA_SETUP_OFFSET 0
|
|
|
|
#define GPMI_TIMING1_DEVICE_BUSY_TIMEOUT_MASK (0xffff << 16)
|
|
#define GPMI_TIMING1_DEVICE_BUSY_TIMEOUT_OFFSET 16
|
|
|
|
#define GPMI_TIMING2_UDMA_TRP_MASK (0xff << 24)
|
|
#define GPMI_TIMING2_UDMA_TRP_OFFSET 24
|
|
#define GPMI_TIMING2_UDMA_ENV_MASK (0xff << 16)
|
|
#define GPMI_TIMING2_UDMA_ENV_OFFSET 16
|
|
#define GPMI_TIMING2_UDMA_HOLD_MASK (0xff << 8)
|
|
#define GPMI_TIMING2_UDMA_HOLD_OFFSET 8
|
|
#define GPMI_TIMING2_UDMA_SETUP_MASK 0xff
|
|
#define GPMI_TIMING2_UDMA_SETUP_OFFSET 0
|
|
|
|
#define GPMI_DATA_DATA_MASK 0xffffffff
|
|
#define GPMI_DATA_DATA_OFFSET 0
|
|
|
|
#define GPMI_STAT_READY_BUSY_MASK (0xff << 24)
|
|
#define GPMI_STAT_READY_BUSY_OFFSET 24
|
|
#define GPMI_STAT_RDY_TIMEOUT_MASK (0xff << 16)
|
|
#define GPMI_STAT_RDY_TIMEOUT_OFFSET 16
|
|
#define GPMI_STAT_DEV7_ERROR (1 << 15)
|
|
#define GPMI_STAT_DEV6_ERROR (1 << 14)
|
|
#define GPMI_STAT_DEV5_ERROR (1 << 13)
|
|
#define GPMI_STAT_DEV4_ERROR (1 << 12)
|
|
#define GPMI_STAT_DEV3_ERROR (1 << 11)
|
|
#define GPMI_STAT_DEV2_ERROR (1 << 10)
|
|
#define GPMI_STAT_DEV1_ERROR (1 << 9)
|
|
#define GPMI_STAT_DEV0_ERROR (1 << 8)
|
|
#define GPMI_STAT_ATA_IRQ (1 << 4)
|
|
#define GPMI_STAT_INVALID_BUFFER_MASK (1 << 3)
|
|
#define GPMI_STAT_FIFO_EMPTY (1 << 2)
|
|
#define GPMI_STAT_FIFO_FULL (1 << 1)
|
|
#define GPMI_STAT_PRESENT (1 << 0)
|
|
|
|
#define GPMI_DEBUG_WAIT_FOR_READY_END_MASK (0xff << 24)
|
|
#define GPMI_DEBUG_WAIT_FOR_READY_END_OFFSET 24
|
|
#define GPMI_DEBUG_DMA_SENSE_MASK (0xff << 16)
|
|
#define GPMI_DEBUG_DMA_SENSE_OFFSET 16
|
|
#define GPMI_DEBUG_DMAREQ_MASK (0xff << 8)
|
|
#define GPMI_DEBUG_DMAREQ_OFFSET 8
|
|
#define GPMI_DEBUG_CMD_END_MASK 0xff
|
|
#define GPMI_DEBUG_CMD_END_OFFSET 0
|
|
|
|
#define GPMI_VERSION_MAJOR_MASK (0xff << 24)
|
|
#define GPMI_VERSION_MAJOR_OFFSET 24
|
|
#define GPMI_VERSION_MINOR_MASK (0xff << 16)
|
|
#define GPMI_VERSION_MINOR_OFFSET 16
|
|
#define GPMI_VERSION_STEP_MASK 0xffff
|
|
#define GPMI_VERSION_STEP_OFFSET 0
|
|
|
|
#define GPMI_DEBUG2_UDMA_STATE_MASK (0xf << 24)
|
|
#define GPMI_DEBUG2_UDMA_STATE_OFFSET 24
|
|
#define GPMI_DEBUG2_BUSY (1 << 23)
|
|
#define GPMI_DEBUG2_PIN_STATE_MASK (0x7 << 20)
|
|
#define GPMI_DEBUG2_PIN_STATE_OFFSET 20
|
|
#define GPMI_DEBUG2_PIN_STATE_PSM_IDLE (0x0 << 20)
|
|
#define GPMI_DEBUG2_PIN_STATE_PSM_BYTCNT (0x1 << 20)
|
|
#define GPMI_DEBUG2_PIN_STATE_PSM_ADDR (0x2 << 20)
|
|
#define GPMI_DEBUG2_PIN_STATE_PSM_STALL (0x3 << 20)
|
|
#define GPMI_DEBUG2_PIN_STATE_PSM_STROBE (0x4 << 20)
|
|
#define GPMI_DEBUG2_PIN_STATE_PSM_ATARDY (0x5 << 20)
|
|
#define GPMI_DEBUG2_PIN_STATE_PSM_DHOLD (0x6 << 20)
|
|
#define GPMI_DEBUG2_PIN_STATE_PSM_DONE (0x7 << 20)
|
|
#define GPMI_DEBUG2_MAIN_STATE_MASK (0xf << 16)
|
|
#define GPMI_DEBUG2_MAIN_STATE_OFFSET 16
|
|
#define GPMI_DEBUG2_MAIN_STATE_MSM_IDLE (0x0 << 16)
|
|
#define GPMI_DEBUG2_MAIN_STATE_MSM_BYTCNT (0x1 << 16)
|
|
#define GPMI_DEBUG2_MAIN_STATE_MSM_WAITFE (0x2 << 16)
|
|
#define GPMI_DEBUG2_MAIN_STATE_MSM_WAITFR (0x3 << 16)
|
|
#define GPMI_DEBUG2_MAIN_STATE_MSM_DMAREQ (0x4 << 16)
|
|
#define GPMI_DEBUG2_MAIN_STATE_MSM_DMAACK (0x5 << 16)
|
|
#define GPMI_DEBUG2_MAIN_STATE_MSM_WAITFF (0x6 << 16)
|
|
#define GPMI_DEBUG2_MAIN_STATE_MSM_LDFIFO (0x7 << 16)
|
|
#define GPMI_DEBUG2_MAIN_STATE_MSM_LDDMAR (0x8 << 16)
|
|
#define GPMI_DEBUG2_MAIN_STATE_MSM_RDCMP (0x9 << 16)
|
|
#define GPMI_DEBUG2_MAIN_STATE_MSM_DONE (0xa << 16)
|
|
#define GPMI_DEBUG2_SYND2GPMI_BE_MASK (0xf << 12)
|
|
#define GPMI_DEBUG2_SYND2GPMI_BE_OFFSET 12
|
|
#define GPMI_DEBUG2_GPMI2SYND_VALID (1 << 11)
|
|
#define GPMI_DEBUG2_GPMI2SYND_READY (1 << 10)
|
|
#define GPMI_DEBUG2_SYND2GPMI_VALID (1 << 9)
|
|
#define GPMI_DEBUG2_SYND2GPMI_READY (1 << 8)
|
|
#define GPMI_DEBUG2_VIEW_DELAYED_RDN (1 << 7)
|
|
#define GPMI_DEBUG2_UPDATE_WINDOW (1 << 6)
|
|
#define GPMI_DEBUG2_RDN_TAP_MASK 0x3f
|
|
#define GPMI_DEBUG2_RDN_TAP_OFFSET 0
|
|
|
|
#define GPMI_DEBUG3_APB_WORD_CNTR_MASK (0xffff << 16)
|
|
#define GPMI_DEBUG3_APB_WORD_CNTR_OFFSET 16
|
|
#define GPMI_DEBUG3_DEV_WORD_CNTR_MASK 0xffff
|
|
#define GPMI_DEBUG3_DEV_WORD_CNTR_OFFSET 0
|
|
|
|
#endif /* __MX28_REGS_GPMI_H__ */
|