mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-20 17:08:52 +09:00
![Joe Hershberger](/assets/img/avatar_default.png)
Update the naming convention used in the network stack functions and variables that Ethernet drivers use to interact with it. This cleans up the temporary hacks that were added to this interface along with the DM support. This patch has a few remaining checkpatch.pl failures that would be out of the scope of this patch to fix (drivers that are in gross violation of checkpatch.pl). Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Simon Glass <sjg@chromium.org>
1137 lines
28 KiB
C
1137 lines
28 KiB
C
/*
|
|
* (C) Copyright 2009 Ilya Yanok, Emcraft Systems Ltd <yanok@emcraft.com>
|
|
* (C) Copyright 2008,2009 Eric Jarrige <eric.jarrige@armadeus.org>
|
|
* (C) Copyright 2008 Armadeus Systems nc
|
|
* (C) Copyright 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
|
|
* (C) Copyright 2007 Pengutronix, Juergen Beisert <j.beisert@pengutronix.de>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <malloc.h>
|
|
#include <net.h>
|
|
#include <netdev.h>
|
|
#include <miiphy.h>
|
|
#include "fec_mxc.h"
|
|
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/imx-regs.h>
|
|
#include <asm/io.h>
|
|
#include <asm/errno.h>
|
|
#include <linux/compiler.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
/*
|
|
* Timeout the transfer after 5 mS. This is usually a bit more, since
|
|
* the code in the tightloops this timeout is used in adds some overhead.
|
|
*/
|
|
#define FEC_XFER_TIMEOUT 5000
|
|
|
|
/*
|
|
* The standard 32-byte DMA alignment does not work on mx6solox, which requires
|
|
* 64-byte alignment in the DMA RX FEC buffer.
|
|
* Introduce the FEC_DMA_RX_MINALIGN which can cover mx6solox needs and also
|
|
* satisfies the alignment on other SoCs (32-bytes)
|
|
*/
|
|
#define FEC_DMA_RX_MINALIGN 64
|
|
|
|
#ifndef CONFIG_MII
|
|
#error "CONFIG_MII has to be defined!"
|
|
#endif
|
|
|
|
#ifndef CONFIG_FEC_XCV_TYPE
|
|
#define CONFIG_FEC_XCV_TYPE MII100
|
|
#endif
|
|
|
|
/*
|
|
* The i.MX28 operates with packets in big endian. We need to swap them before
|
|
* sending and after receiving.
|
|
*/
|
|
#ifdef CONFIG_MX28
|
|
#define CONFIG_FEC_MXC_SWAP_PACKET
|
|
#endif
|
|
|
|
#define RXDESC_PER_CACHELINE (ARCH_DMA_MINALIGN/sizeof(struct fec_bd))
|
|
|
|
/* Check various alignment issues at compile time */
|
|
#if ((ARCH_DMA_MINALIGN < 16) || (ARCH_DMA_MINALIGN % 16 != 0))
|
|
#error "ARCH_DMA_MINALIGN must be multiple of 16!"
|
|
#endif
|
|
|
|
#if ((PKTALIGN < ARCH_DMA_MINALIGN) || \
|
|
(PKTALIGN % ARCH_DMA_MINALIGN != 0))
|
|
#error "PKTALIGN must be multiple of ARCH_DMA_MINALIGN!"
|
|
#endif
|
|
|
|
#undef DEBUG
|
|
|
|
struct nbuf {
|
|
uint8_t data[1500]; /**< actual data */
|
|
int length; /**< actual length */
|
|
int used; /**< buffer in use or not */
|
|
uint8_t head[16]; /**< MAC header(6 + 6 + 2) + 2(aligned) */
|
|
};
|
|
|
|
#ifdef CONFIG_FEC_MXC_SWAP_PACKET
|
|
static void swap_packet(uint32_t *packet, int length)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < DIV_ROUND_UP(length, 4); i++)
|
|
packet[i] = __swab32(packet[i]);
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* MII-interface related functions
|
|
*/
|
|
static int fec_mdio_read(struct ethernet_regs *eth, uint8_t phyAddr,
|
|
uint8_t regAddr)
|
|
{
|
|
uint32_t reg; /* convenient holder for the PHY register */
|
|
uint32_t phy; /* convenient holder for the PHY */
|
|
uint32_t start;
|
|
int val;
|
|
|
|
/*
|
|
* reading from any PHY's register is done by properly
|
|
* programming the FEC's MII data register.
|
|
*/
|
|
writel(FEC_IEVENT_MII, ð->ievent);
|
|
reg = regAddr << FEC_MII_DATA_RA_SHIFT;
|
|
phy = phyAddr << FEC_MII_DATA_PA_SHIFT;
|
|
|
|
writel(FEC_MII_DATA_ST | FEC_MII_DATA_OP_RD | FEC_MII_DATA_TA |
|
|
phy | reg, ð->mii_data);
|
|
|
|
/*
|
|
* wait for the related interrupt
|
|
*/
|
|
start = get_timer(0);
|
|
while (!(readl(ð->ievent) & FEC_IEVENT_MII)) {
|
|
if (get_timer(start) > (CONFIG_SYS_HZ / 1000)) {
|
|
printf("Read MDIO failed...\n");
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* clear mii interrupt bit
|
|
*/
|
|
writel(FEC_IEVENT_MII, ð->ievent);
|
|
|
|
/*
|
|
* it's now safe to read the PHY's register
|
|
*/
|
|
val = (unsigned short)readl(ð->mii_data);
|
|
debug("%s: phy: %02x reg:%02x val:%#x\n", __func__, phyAddr,
|
|
regAddr, val);
|
|
return val;
|
|
}
|
|
|
|
static void fec_mii_setspeed(struct ethernet_regs *eth)
|
|
{
|
|
/*
|
|
* Set MII_SPEED = (1/(mii_speed * 2)) * System Clock
|
|
* and do not drop the Preamble.
|
|
*/
|
|
register u32 speed = DIV_ROUND_UP(imx_get_fecclk(), 5000000);
|
|
#ifdef FEC_QUIRK_ENET_MAC
|
|
speed--;
|
|
#endif
|
|
speed <<= 1;
|
|
writel(speed, ð->mii_speed);
|
|
debug("%s: mii_speed %08x\n", __func__, readl(ð->mii_speed));
|
|
}
|
|
|
|
static int fec_mdio_write(struct ethernet_regs *eth, uint8_t phyAddr,
|
|
uint8_t regAddr, uint16_t data)
|
|
{
|
|
uint32_t reg; /* convenient holder for the PHY register */
|
|
uint32_t phy; /* convenient holder for the PHY */
|
|
uint32_t start;
|
|
|
|
reg = regAddr << FEC_MII_DATA_RA_SHIFT;
|
|
phy = phyAddr << FEC_MII_DATA_PA_SHIFT;
|
|
|
|
writel(FEC_MII_DATA_ST | FEC_MII_DATA_OP_WR |
|
|
FEC_MII_DATA_TA | phy | reg | data, ð->mii_data);
|
|
|
|
/*
|
|
* wait for the MII interrupt
|
|
*/
|
|
start = get_timer(0);
|
|
while (!(readl(ð->ievent) & FEC_IEVENT_MII)) {
|
|
if (get_timer(start) > (CONFIG_SYS_HZ / 1000)) {
|
|
printf("Write MDIO failed...\n");
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* clear MII interrupt bit
|
|
*/
|
|
writel(FEC_IEVENT_MII, ð->ievent);
|
|
debug("%s: phy: %02x reg:%02x val:%#x\n", __func__, phyAddr,
|
|
regAddr, data);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int fec_phy_read(struct mii_dev *bus, int phyAddr, int dev_addr,
|
|
int regAddr)
|
|
{
|
|
return fec_mdio_read(bus->priv, phyAddr, regAddr);
|
|
}
|
|
|
|
static int fec_phy_write(struct mii_dev *bus, int phyAddr, int dev_addr,
|
|
int regAddr, u16 data)
|
|
{
|
|
return fec_mdio_write(bus->priv, phyAddr, regAddr, data);
|
|
}
|
|
|
|
#ifndef CONFIG_PHYLIB
|
|
static int miiphy_restart_aneg(struct eth_device *dev)
|
|
{
|
|
int ret = 0;
|
|
#if !defined(CONFIG_FEC_MXC_NO_ANEG)
|
|
struct fec_priv *fec = (struct fec_priv *)dev->priv;
|
|
struct ethernet_regs *eth = fec->bus->priv;
|
|
|
|
/*
|
|
* Wake up from sleep if necessary
|
|
* Reset PHY, then delay 300ns
|
|
*/
|
|
#ifdef CONFIG_MX27
|
|
fec_mdio_write(eth, fec->phy_id, MII_DCOUNTER, 0x00FF);
|
|
#endif
|
|
fec_mdio_write(eth, fec->phy_id, MII_BMCR, BMCR_RESET);
|
|
udelay(1000);
|
|
|
|
/*
|
|
* Set the auto-negotiation advertisement register bits
|
|
*/
|
|
fec_mdio_write(eth, fec->phy_id, MII_ADVERTISE,
|
|
LPA_100FULL | LPA_100HALF | LPA_10FULL |
|
|
LPA_10HALF | PHY_ANLPAR_PSB_802_3);
|
|
fec_mdio_write(eth, fec->phy_id, MII_BMCR,
|
|
BMCR_ANENABLE | BMCR_ANRESTART);
|
|
|
|
if (fec->mii_postcall)
|
|
ret = fec->mii_postcall(fec->phy_id);
|
|
|
|
#endif
|
|
return ret;
|
|
}
|
|
|
|
static int miiphy_wait_aneg(struct eth_device *dev)
|
|
{
|
|
uint32_t start;
|
|
int status;
|
|
struct fec_priv *fec = (struct fec_priv *)dev->priv;
|
|
struct ethernet_regs *eth = fec->bus->priv;
|
|
|
|
/*
|
|
* Wait for AN completion
|
|
*/
|
|
start = get_timer(0);
|
|
do {
|
|
if (get_timer(start) > (CONFIG_SYS_HZ * 5)) {
|
|
printf("%s: Autonegotiation timeout\n", dev->name);
|
|
return -1;
|
|
}
|
|
|
|
status = fec_mdio_read(eth, fec->phy_id, MII_BMSR);
|
|
if (status < 0) {
|
|
printf("%s: Autonegotiation failed. status: %d\n",
|
|
dev->name, status);
|
|
return -1;
|
|
}
|
|
} while (!(status & BMSR_LSTATUS));
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static int fec_rx_task_enable(struct fec_priv *fec)
|
|
{
|
|
writel(FEC_R_DES_ACTIVE_RDAR, &fec->eth->r_des_active);
|
|
return 0;
|
|
}
|
|
|
|
static int fec_rx_task_disable(struct fec_priv *fec)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int fec_tx_task_enable(struct fec_priv *fec)
|
|
{
|
|
writel(FEC_X_DES_ACTIVE_TDAR, &fec->eth->x_des_active);
|
|
return 0;
|
|
}
|
|
|
|
static int fec_tx_task_disable(struct fec_priv *fec)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* Initialize receive task's buffer descriptors
|
|
* @param[in] fec all we know about the device yet
|
|
* @param[in] count receive buffer count to be allocated
|
|
* @param[in] dsize desired size of each receive buffer
|
|
* @return 0 on success
|
|
*
|
|
* Init all RX descriptors to default values.
|
|
*/
|
|
static void fec_rbd_init(struct fec_priv *fec, int count, int dsize)
|
|
{
|
|
uint32_t size;
|
|
uint8_t *data;
|
|
int i;
|
|
|
|
/*
|
|
* Reload the RX descriptors with default values and wipe
|
|
* the RX buffers.
|
|
*/
|
|
size = roundup(dsize, ARCH_DMA_MINALIGN);
|
|
for (i = 0; i < count; i++) {
|
|
data = (uint8_t *)fec->rbd_base[i].data_pointer;
|
|
memset(data, 0, dsize);
|
|
flush_dcache_range((uint32_t)data, (uint32_t)data + size);
|
|
|
|
fec->rbd_base[i].status = FEC_RBD_EMPTY;
|
|
fec->rbd_base[i].data_length = 0;
|
|
}
|
|
|
|
/* Mark the last RBD to close the ring. */
|
|
fec->rbd_base[i - 1].status = FEC_RBD_WRAP | FEC_RBD_EMPTY;
|
|
fec->rbd_index = 0;
|
|
|
|
flush_dcache_range((unsigned)fec->rbd_base,
|
|
(unsigned)fec->rbd_base + size);
|
|
}
|
|
|
|
/**
|
|
* Initialize transmit task's buffer descriptors
|
|
* @param[in] fec all we know about the device yet
|
|
*
|
|
* Transmit buffers are created externally. We only have to init the BDs here.\n
|
|
* Note: There is a race condition in the hardware. When only one BD is in
|
|
* use it must be marked with the WRAP bit to use it for every transmitt.
|
|
* This bit in combination with the READY bit results into double transmit
|
|
* of each data buffer. It seems the state machine checks READY earlier then
|
|
* resetting it after the first transfer.
|
|
* Using two BDs solves this issue.
|
|
*/
|
|
static void fec_tbd_init(struct fec_priv *fec)
|
|
{
|
|
unsigned addr = (unsigned)fec->tbd_base;
|
|
unsigned size = roundup(2 * sizeof(struct fec_bd),
|
|
ARCH_DMA_MINALIGN);
|
|
|
|
memset(fec->tbd_base, 0, size);
|
|
fec->tbd_base[0].status = 0;
|
|
fec->tbd_base[1].status = FEC_TBD_WRAP;
|
|
fec->tbd_index = 0;
|
|
flush_dcache_range(addr, addr + size);
|
|
}
|
|
|
|
/**
|
|
* Mark the given read buffer descriptor as free
|
|
* @param[in] last 1 if this is the last buffer descriptor in the chain, else 0
|
|
* @param[in] pRbd buffer descriptor to mark free again
|
|
*/
|
|
static void fec_rbd_clean(int last, struct fec_bd *pRbd)
|
|
{
|
|
unsigned short flags = FEC_RBD_EMPTY;
|
|
if (last)
|
|
flags |= FEC_RBD_WRAP;
|
|
writew(flags, &pRbd->status);
|
|
writew(0, &pRbd->data_length);
|
|
}
|
|
|
|
static int fec_get_hwaddr(struct eth_device *dev, int dev_id,
|
|
unsigned char *mac)
|
|
{
|
|
imx_get_mac_from_fuse(dev_id, mac);
|
|
return !is_valid_ethaddr(mac);
|
|
}
|
|
|
|
static int fec_set_hwaddr(struct eth_device *dev)
|
|
{
|
|
uchar *mac = dev->enetaddr;
|
|
struct fec_priv *fec = (struct fec_priv *)dev->priv;
|
|
|
|
writel(0, &fec->eth->iaddr1);
|
|
writel(0, &fec->eth->iaddr2);
|
|
writel(0, &fec->eth->gaddr1);
|
|
writel(0, &fec->eth->gaddr2);
|
|
|
|
/*
|
|
* Set physical address
|
|
*/
|
|
writel((mac[0] << 24) + (mac[1] << 16) + (mac[2] << 8) + mac[3],
|
|
&fec->eth->paddr1);
|
|
writel((mac[4] << 24) + (mac[5] << 16) + 0x8808, &fec->eth->paddr2);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Do initial configuration of the FEC registers
|
|
*/
|
|
static void fec_reg_setup(struct fec_priv *fec)
|
|
{
|
|
uint32_t rcntrl;
|
|
|
|
/*
|
|
* Set interrupt mask register
|
|
*/
|
|
writel(0x00000000, &fec->eth->imask);
|
|
|
|
/*
|
|
* Clear FEC-Lite interrupt event register(IEVENT)
|
|
*/
|
|
writel(0xffffffff, &fec->eth->ievent);
|
|
|
|
|
|
/*
|
|
* Set FEC-Lite receive control register(R_CNTRL):
|
|
*/
|
|
|
|
/* Start with frame length = 1518, common for all modes. */
|
|
rcntrl = PKTSIZE << FEC_RCNTRL_MAX_FL_SHIFT;
|
|
if (fec->xcv_type != SEVENWIRE) /* xMII modes */
|
|
rcntrl |= FEC_RCNTRL_FCE | FEC_RCNTRL_MII_MODE;
|
|
if (fec->xcv_type == RGMII)
|
|
rcntrl |= FEC_RCNTRL_RGMII;
|
|
else if (fec->xcv_type == RMII)
|
|
rcntrl |= FEC_RCNTRL_RMII;
|
|
|
|
writel(rcntrl, &fec->eth->r_cntrl);
|
|
}
|
|
|
|
/**
|
|
* Start the FEC engine
|
|
* @param[in] dev Our device to handle
|
|
*/
|
|
static int fec_open(struct eth_device *edev)
|
|
{
|
|
struct fec_priv *fec = (struct fec_priv *)edev->priv;
|
|
int speed;
|
|
uint32_t addr, size;
|
|
int i;
|
|
|
|
debug("fec_open: fec_open(dev)\n");
|
|
/* full-duplex, heartbeat disabled */
|
|
writel(1 << 2, &fec->eth->x_cntrl);
|
|
fec->rbd_index = 0;
|
|
|
|
/* Invalidate all descriptors */
|
|
for (i = 0; i < FEC_RBD_NUM - 1; i++)
|
|
fec_rbd_clean(0, &fec->rbd_base[i]);
|
|
fec_rbd_clean(1, &fec->rbd_base[i]);
|
|
|
|
/* Flush the descriptors into RAM */
|
|
size = roundup(FEC_RBD_NUM * sizeof(struct fec_bd),
|
|
ARCH_DMA_MINALIGN);
|
|
addr = (uint32_t)fec->rbd_base;
|
|
flush_dcache_range(addr, addr + size);
|
|
|
|
#ifdef FEC_QUIRK_ENET_MAC
|
|
/* Enable ENET HW endian SWAP */
|
|
writel(readl(&fec->eth->ecntrl) | FEC_ECNTRL_DBSWAP,
|
|
&fec->eth->ecntrl);
|
|
/* Enable ENET store and forward mode */
|
|
writel(readl(&fec->eth->x_wmrk) | FEC_X_WMRK_STRFWD,
|
|
&fec->eth->x_wmrk);
|
|
#endif
|
|
/*
|
|
* Enable FEC-Lite controller
|
|
*/
|
|
writel(readl(&fec->eth->ecntrl) | FEC_ECNTRL_ETHER_EN,
|
|
&fec->eth->ecntrl);
|
|
#if defined(CONFIG_MX25) || defined(CONFIG_MX53) || defined(CONFIG_MX6SL)
|
|
udelay(100);
|
|
/*
|
|
* setup the MII gasket for RMII mode
|
|
*/
|
|
|
|
/* disable the gasket */
|
|
writew(0, &fec->eth->miigsk_enr);
|
|
|
|
/* wait for the gasket to be disabled */
|
|
while (readw(&fec->eth->miigsk_enr) & MIIGSK_ENR_READY)
|
|
udelay(2);
|
|
|
|
/* configure gasket for RMII, 50 MHz, no loopback, and no echo */
|
|
writew(MIIGSK_CFGR_IF_MODE_RMII, &fec->eth->miigsk_cfgr);
|
|
|
|
/* re-enable the gasket */
|
|
writew(MIIGSK_ENR_EN, &fec->eth->miigsk_enr);
|
|
|
|
/* wait until MII gasket is ready */
|
|
int max_loops = 10;
|
|
while ((readw(&fec->eth->miigsk_enr) & MIIGSK_ENR_READY) == 0) {
|
|
if (--max_loops <= 0) {
|
|
printf("WAIT for MII Gasket ready timed out\n");
|
|
break;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_PHYLIB
|
|
{
|
|
/* Start up the PHY */
|
|
int ret = phy_startup(fec->phydev);
|
|
|
|
if (ret) {
|
|
printf("Could not initialize PHY %s\n",
|
|
fec->phydev->dev->name);
|
|
return ret;
|
|
}
|
|
speed = fec->phydev->speed;
|
|
}
|
|
#else
|
|
miiphy_wait_aneg(edev);
|
|
speed = miiphy_speed(edev->name, fec->phy_id);
|
|
miiphy_duplex(edev->name, fec->phy_id);
|
|
#endif
|
|
|
|
#ifdef FEC_QUIRK_ENET_MAC
|
|
{
|
|
u32 ecr = readl(&fec->eth->ecntrl) & ~FEC_ECNTRL_SPEED;
|
|
u32 rcr = readl(&fec->eth->r_cntrl) & ~FEC_RCNTRL_RMII_10T;
|
|
if (speed == _1000BASET)
|
|
ecr |= FEC_ECNTRL_SPEED;
|
|
else if (speed != _100BASET)
|
|
rcr |= FEC_RCNTRL_RMII_10T;
|
|
writel(ecr, &fec->eth->ecntrl);
|
|
writel(rcr, &fec->eth->r_cntrl);
|
|
}
|
|
#endif
|
|
debug("%s:Speed=%i\n", __func__, speed);
|
|
|
|
/*
|
|
* Enable SmartDMA receive task
|
|
*/
|
|
fec_rx_task_enable(fec);
|
|
|
|
udelay(100000);
|
|
return 0;
|
|
}
|
|
|
|
static int fec_init(struct eth_device *dev, bd_t* bd)
|
|
{
|
|
struct fec_priv *fec = (struct fec_priv *)dev->priv;
|
|
uint32_t mib_ptr = (uint32_t)&fec->eth->rmon_t_drop;
|
|
int i;
|
|
|
|
/* Initialize MAC address */
|
|
fec_set_hwaddr(dev);
|
|
|
|
/*
|
|
* Setup transmit descriptors, there are two in total.
|
|
*/
|
|
fec_tbd_init(fec);
|
|
|
|
/* Setup receive descriptors. */
|
|
fec_rbd_init(fec, FEC_RBD_NUM, FEC_MAX_PKT_SIZE);
|
|
|
|
fec_reg_setup(fec);
|
|
|
|
if (fec->xcv_type != SEVENWIRE)
|
|
fec_mii_setspeed(fec->bus->priv);
|
|
|
|
/*
|
|
* Set Opcode/Pause Duration Register
|
|
*/
|
|
writel(0x00010020, &fec->eth->op_pause); /* FIXME 0xffff0020; */
|
|
writel(0x2, &fec->eth->x_wmrk);
|
|
/*
|
|
* Set multicast address filter
|
|
*/
|
|
writel(0x00000000, &fec->eth->gaddr1);
|
|
writel(0x00000000, &fec->eth->gaddr2);
|
|
|
|
|
|
/* clear MIB RAM */
|
|
for (i = mib_ptr; i <= mib_ptr + 0xfc; i += 4)
|
|
writel(0, i);
|
|
|
|
/* FIFO receive start register */
|
|
writel(0x520, &fec->eth->r_fstart);
|
|
|
|
/* size and address of each buffer */
|
|
writel(FEC_MAX_PKT_SIZE, &fec->eth->emrbr);
|
|
writel((uint32_t)fec->tbd_base, &fec->eth->etdsr);
|
|
writel((uint32_t)fec->rbd_base, &fec->eth->erdsr);
|
|
|
|
#ifndef CONFIG_PHYLIB
|
|
if (fec->xcv_type != SEVENWIRE)
|
|
miiphy_restart_aneg(dev);
|
|
#endif
|
|
fec_open(dev);
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* Halt the FEC engine
|
|
* @param[in] dev Our device to handle
|
|
*/
|
|
static void fec_halt(struct eth_device *dev)
|
|
{
|
|
struct fec_priv *fec = (struct fec_priv *)dev->priv;
|
|
int counter = 0xffff;
|
|
|
|
/*
|
|
* issue graceful stop command to the FEC transmitter if necessary
|
|
*/
|
|
writel(FEC_TCNTRL_GTS | readl(&fec->eth->x_cntrl),
|
|
&fec->eth->x_cntrl);
|
|
|
|
debug("eth_halt: wait for stop regs\n");
|
|
/*
|
|
* wait for graceful stop to register
|
|
*/
|
|
while ((counter--) && (!(readl(&fec->eth->ievent) & FEC_IEVENT_GRA)))
|
|
udelay(1);
|
|
|
|
/*
|
|
* Disable SmartDMA tasks
|
|
*/
|
|
fec_tx_task_disable(fec);
|
|
fec_rx_task_disable(fec);
|
|
|
|
/*
|
|
* Disable the Ethernet Controller
|
|
* Note: this will also reset the BD index counter!
|
|
*/
|
|
writel(readl(&fec->eth->ecntrl) & ~FEC_ECNTRL_ETHER_EN,
|
|
&fec->eth->ecntrl);
|
|
fec->rbd_index = 0;
|
|
fec->tbd_index = 0;
|
|
debug("eth_halt: done\n");
|
|
}
|
|
|
|
/**
|
|
* Transmit one frame
|
|
* @param[in] dev Our ethernet device to handle
|
|
* @param[in] packet Pointer to the data to be transmitted
|
|
* @param[in] length Data count in bytes
|
|
* @return 0 on success
|
|
*/
|
|
static int fec_send(struct eth_device *dev, void *packet, int length)
|
|
{
|
|
unsigned int status;
|
|
uint32_t size, end;
|
|
uint32_t addr;
|
|
int timeout = FEC_XFER_TIMEOUT;
|
|
int ret = 0;
|
|
|
|
/*
|
|
* This routine transmits one frame. This routine only accepts
|
|
* 6-byte Ethernet addresses.
|
|
*/
|
|
struct fec_priv *fec = (struct fec_priv *)dev->priv;
|
|
|
|
/*
|
|
* Check for valid length of data.
|
|
*/
|
|
if ((length > 1500) || (length <= 0)) {
|
|
printf("Payload (%d) too large\n", length);
|
|
return -1;
|
|
}
|
|
|
|
/*
|
|
* Setup the transmit buffer. We are always using the first buffer for
|
|
* transmission, the second will be empty and only used to stop the DMA
|
|
* engine. We also flush the packet to RAM here to avoid cache trouble.
|
|
*/
|
|
#ifdef CONFIG_FEC_MXC_SWAP_PACKET
|
|
swap_packet((uint32_t *)packet, length);
|
|
#endif
|
|
|
|
addr = (uint32_t)packet;
|
|
end = roundup(addr + length, ARCH_DMA_MINALIGN);
|
|
addr &= ~(ARCH_DMA_MINALIGN - 1);
|
|
flush_dcache_range(addr, end);
|
|
|
|
writew(length, &fec->tbd_base[fec->tbd_index].data_length);
|
|
writel(addr, &fec->tbd_base[fec->tbd_index].data_pointer);
|
|
|
|
/*
|
|
* update BD's status now
|
|
* This block:
|
|
* - is always the last in a chain (means no chain)
|
|
* - should transmitt the CRC
|
|
* - might be the last BD in the list, so the address counter should
|
|
* wrap (-> keep the WRAP flag)
|
|
*/
|
|
status = readw(&fec->tbd_base[fec->tbd_index].status) & FEC_TBD_WRAP;
|
|
status |= FEC_TBD_LAST | FEC_TBD_TC | FEC_TBD_READY;
|
|
writew(status, &fec->tbd_base[fec->tbd_index].status);
|
|
|
|
/*
|
|
* Flush data cache. This code flushes both TX descriptors to RAM.
|
|
* After this code, the descriptors will be safely in RAM and we
|
|
* can start DMA.
|
|
*/
|
|
size = roundup(2 * sizeof(struct fec_bd), ARCH_DMA_MINALIGN);
|
|
addr = (uint32_t)fec->tbd_base;
|
|
flush_dcache_range(addr, addr + size);
|
|
|
|
/*
|
|
* Below we read the DMA descriptor's last four bytes back from the
|
|
* DRAM. This is important in order to make sure that all WRITE
|
|
* operations on the bus that were triggered by previous cache FLUSH
|
|
* have completed.
|
|
*
|
|
* Otherwise, on MX28, it is possible to observe a corruption of the
|
|
* DMA descriptors. Please refer to schematic "Figure 1-2" in MX28RM
|
|
* for the bus structure of MX28. The scenario is as follows:
|
|
*
|
|
* 1) ARM core triggers a series of WRITEs on the AHB_ARB2 bus going
|
|
* to DRAM due to flush_dcache_range()
|
|
* 2) ARM core writes the FEC registers via AHB_ARB2
|
|
* 3) FEC DMA starts reading/writing from/to DRAM via AHB_ARB3
|
|
*
|
|
* Note that 2) does sometimes finish before 1) due to reordering of
|
|
* WRITE accesses on the AHB bus, therefore triggering 3) before the
|
|
* DMA descriptor is fully written into DRAM. This results in occasional
|
|
* corruption of the DMA descriptor.
|
|
*/
|
|
readl(addr + size - 4);
|
|
|
|
/*
|
|
* Enable SmartDMA transmit task
|
|
*/
|
|
fec_tx_task_enable(fec);
|
|
|
|
/*
|
|
* Wait until frame is sent. On each turn of the wait cycle, we must
|
|
* invalidate data cache to see what's really in RAM. Also, we need
|
|
* barrier here.
|
|
*/
|
|
while (--timeout) {
|
|
if (!(readl(&fec->eth->x_des_active) & FEC_X_DES_ACTIVE_TDAR))
|
|
break;
|
|
}
|
|
|
|
if (!timeout) {
|
|
ret = -EINVAL;
|
|
goto out;
|
|
}
|
|
|
|
/*
|
|
* The TDAR bit is cleared when the descriptors are all out from TX
|
|
* but on mx6solox we noticed that the READY bit is still not cleared
|
|
* right after TDAR.
|
|
* These are two distinct signals, and in IC simulation, we found that
|
|
* TDAR always gets cleared prior than the READY bit of last BD becomes
|
|
* cleared.
|
|
* In mx6solox, we use a later version of FEC IP. It looks like that
|
|
* this intrinsic behaviour of TDAR bit has changed in this newer FEC
|
|
* version.
|
|
*
|
|
* Fix this by polling the READY bit of BD after the TDAR polling,
|
|
* which covers the mx6solox case and does not harm the other SoCs.
|
|
*/
|
|
timeout = FEC_XFER_TIMEOUT;
|
|
while (--timeout) {
|
|
invalidate_dcache_range(addr, addr + size);
|
|
if (!(readw(&fec->tbd_base[fec->tbd_index].status) &
|
|
FEC_TBD_READY))
|
|
break;
|
|
}
|
|
|
|
if (!timeout)
|
|
ret = -EINVAL;
|
|
|
|
out:
|
|
debug("fec_send: status 0x%x index %d ret %i\n",
|
|
readw(&fec->tbd_base[fec->tbd_index].status),
|
|
fec->tbd_index, ret);
|
|
/* for next transmission use the other buffer */
|
|
if (fec->tbd_index)
|
|
fec->tbd_index = 0;
|
|
else
|
|
fec->tbd_index = 1;
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* Pull one frame from the card
|
|
* @param[in] dev Our ethernet device to handle
|
|
* @return Length of packet read
|
|
*/
|
|
static int fec_recv(struct eth_device *dev)
|
|
{
|
|
struct fec_priv *fec = (struct fec_priv *)dev->priv;
|
|
struct fec_bd *rbd = &fec->rbd_base[fec->rbd_index];
|
|
unsigned long ievent;
|
|
int frame_length, len = 0;
|
|
struct nbuf *frame;
|
|
uint16_t bd_status;
|
|
uint32_t addr, size, end;
|
|
int i;
|
|
ALLOC_CACHE_ALIGN_BUFFER(uchar, buff, FEC_MAX_PKT_SIZE);
|
|
|
|
/*
|
|
* Check if any critical events have happened
|
|
*/
|
|
ievent = readl(&fec->eth->ievent);
|
|
writel(ievent, &fec->eth->ievent);
|
|
debug("fec_recv: ievent 0x%lx\n", ievent);
|
|
if (ievent & FEC_IEVENT_BABR) {
|
|
fec_halt(dev);
|
|
fec_init(dev, fec->bd);
|
|
printf("some error: 0x%08lx\n", ievent);
|
|
return 0;
|
|
}
|
|
if (ievent & FEC_IEVENT_HBERR) {
|
|
/* Heartbeat error */
|
|
writel(0x00000001 | readl(&fec->eth->x_cntrl),
|
|
&fec->eth->x_cntrl);
|
|
}
|
|
if (ievent & FEC_IEVENT_GRA) {
|
|
/* Graceful stop complete */
|
|
if (readl(&fec->eth->x_cntrl) & 0x00000001) {
|
|
fec_halt(dev);
|
|
writel(~0x00000001 & readl(&fec->eth->x_cntrl),
|
|
&fec->eth->x_cntrl);
|
|
fec_init(dev, fec->bd);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Read the buffer status. Before the status can be read, the data cache
|
|
* must be invalidated, because the data in RAM might have been changed
|
|
* by DMA. The descriptors are properly aligned to cachelines so there's
|
|
* no need to worry they'd overlap.
|
|
*
|
|
* WARNING: By invalidating the descriptor here, we also invalidate
|
|
* the descriptors surrounding this one. Therefore we can NOT change the
|
|
* contents of this descriptor nor the surrounding ones. The problem is
|
|
* that in order to mark the descriptor as processed, we need to change
|
|
* the descriptor. The solution is to mark the whole cache line when all
|
|
* descriptors in the cache line are processed.
|
|
*/
|
|
addr = (uint32_t)rbd;
|
|
addr &= ~(ARCH_DMA_MINALIGN - 1);
|
|
size = roundup(sizeof(struct fec_bd), ARCH_DMA_MINALIGN);
|
|
invalidate_dcache_range(addr, addr + size);
|
|
|
|
bd_status = readw(&rbd->status);
|
|
debug("fec_recv: status 0x%x\n", bd_status);
|
|
|
|
if (!(bd_status & FEC_RBD_EMPTY)) {
|
|
if ((bd_status & FEC_RBD_LAST) && !(bd_status & FEC_RBD_ERR) &&
|
|
((readw(&rbd->data_length) - 4) > 14)) {
|
|
/*
|
|
* Get buffer address and size
|
|
*/
|
|
frame = (struct nbuf *)readl(&rbd->data_pointer);
|
|
frame_length = readw(&rbd->data_length) - 4;
|
|
/*
|
|
* Invalidate data cache over the buffer
|
|
*/
|
|
addr = (uint32_t)frame;
|
|
end = roundup(addr + frame_length, ARCH_DMA_MINALIGN);
|
|
addr &= ~(ARCH_DMA_MINALIGN - 1);
|
|
invalidate_dcache_range(addr, end);
|
|
|
|
/*
|
|
* Fill the buffer and pass it to upper layers
|
|
*/
|
|
#ifdef CONFIG_FEC_MXC_SWAP_PACKET
|
|
swap_packet((uint32_t *)frame->data, frame_length);
|
|
#endif
|
|
memcpy(buff, frame->data, frame_length);
|
|
net_process_received_packet(buff, frame_length);
|
|
len = frame_length;
|
|
} else {
|
|
if (bd_status & FEC_RBD_ERR)
|
|
printf("error frame: 0x%08lx 0x%08x\n",
|
|
(ulong)rbd->data_pointer,
|
|
bd_status);
|
|
}
|
|
|
|
/*
|
|
* Free the current buffer, restart the engine and move forward
|
|
* to the next buffer. Here we check if the whole cacheline of
|
|
* descriptors was already processed and if so, we mark it free
|
|
* as whole.
|
|
*/
|
|
size = RXDESC_PER_CACHELINE - 1;
|
|
if ((fec->rbd_index & size) == size) {
|
|
i = fec->rbd_index - size;
|
|
addr = (uint32_t)&fec->rbd_base[i];
|
|
for (; i <= fec->rbd_index ; i++) {
|
|
fec_rbd_clean(i == (FEC_RBD_NUM - 1),
|
|
&fec->rbd_base[i]);
|
|
}
|
|
flush_dcache_range(addr,
|
|
addr + ARCH_DMA_MINALIGN);
|
|
}
|
|
|
|
fec_rx_task_enable(fec);
|
|
fec->rbd_index = (fec->rbd_index + 1) % FEC_RBD_NUM;
|
|
}
|
|
debug("fec_recv: stop\n");
|
|
|
|
return len;
|
|
}
|
|
|
|
static void fec_set_dev_name(char *dest, int dev_id)
|
|
{
|
|
sprintf(dest, (dev_id == -1) ? "FEC" : "FEC%i", dev_id);
|
|
}
|
|
|
|
static int fec_alloc_descs(struct fec_priv *fec)
|
|
{
|
|
unsigned int size;
|
|
int i;
|
|
uint8_t *data;
|
|
|
|
/* Allocate TX descriptors. */
|
|
size = roundup(2 * sizeof(struct fec_bd), ARCH_DMA_MINALIGN);
|
|
fec->tbd_base = memalign(ARCH_DMA_MINALIGN, size);
|
|
if (!fec->tbd_base)
|
|
goto err_tx;
|
|
|
|
/* Allocate RX descriptors. */
|
|
size = roundup(FEC_RBD_NUM * sizeof(struct fec_bd), ARCH_DMA_MINALIGN);
|
|
fec->rbd_base = memalign(ARCH_DMA_MINALIGN, size);
|
|
if (!fec->rbd_base)
|
|
goto err_rx;
|
|
|
|
memset(fec->rbd_base, 0, size);
|
|
|
|
/* Allocate RX buffers. */
|
|
|
|
/* Maximum RX buffer size. */
|
|
size = roundup(FEC_MAX_PKT_SIZE, FEC_DMA_RX_MINALIGN);
|
|
for (i = 0; i < FEC_RBD_NUM; i++) {
|
|
data = memalign(FEC_DMA_RX_MINALIGN, size);
|
|
if (!data) {
|
|
printf("%s: error allocating rxbuf %d\n", __func__, i);
|
|
goto err_ring;
|
|
}
|
|
|
|
memset(data, 0, size);
|
|
|
|
fec->rbd_base[i].data_pointer = (uint32_t)data;
|
|
fec->rbd_base[i].status = FEC_RBD_EMPTY;
|
|
fec->rbd_base[i].data_length = 0;
|
|
/* Flush the buffer to memory. */
|
|
flush_dcache_range((uint32_t)data, (uint32_t)data + size);
|
|
}
|
|
|
|
/* Mark the last RBD to close the ring. */
|
|
fec->rbd_base[i - 1].status = FEC_RBD_WRAP | FEC_RBD_EMPTY;
|
|
|
|
fec->rbd_index = 0;
|
|
fec->tbd_index = 0;
|
|
|
|
return 0;
|
|
|
|
err_ring:
|
|
for (; i >= 0; i--)
|
|
free((void *)fec->rbd_base[i].data_pointer);
|
|
free(fec->rbd_base);
|
|
err_rx:
|
|
free(fec->tbd_base);
|
|
err_tx:
|
|
return -ENOMEM;
|
|
}
|
|
|
|
static void fec_free_descs(struct fec_priv *fec)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < FEC_RBD_NUM; i++)
|
|
free((void *)fec->rbd_base[i].data_pointer);
|
|
free(fec->rbd_base);
|
|
free(fec->tbd_base);
|
|
}
|
|
|
|
#ifdef CONFIG_PHYLIB
|
|
int fec_probe(bd_t *bd, int dev_id, uint32_t base_addr,
|
|
struct mii_dev *bus, struct phy_device *phydev)
|
|
#else
|
|
static int fec_probe(bd_t *bd, int dev_id, uint32_t base_addr,
|
|
struct mii_dev *bus, int phy_id)
|
|
#endif
|
|
{
|
|
struct eth_device *edev;
|
|
struct fec_priv *fec;
|
|
unsigned char ethaddr[6];
|
|
uint32_t start;
|
|
int ret = 0;
|
|
|
|
/* create and fill edev struct */
|
|
edev = (struct eth_device *)malloc(sizeof(struct eth_device));
|
|
if (!edev) {
|
|
puts("fec_mxc: not enough malloc memory for eth_device\n");
|
|
ret = -ENOMEM;
|
|
goto err1;
|
|
}
|
|
|
|
fec = (struct fec_priv *)malloc(sizeof(struct fec_priv));
|
|
if (!fec) {
|
|
puts("fec_mxc: not enough malloc memory for fec_priv\n");
|
|
ret = -ENOMEM;
|
|
goto err2;
|
|
}
|
|
|
|
memset(edev, 0, sizeof(*edev));
|
|
memset(fec, 0, sizeof(*fec));
|
|
|
|
ret = fec_alloc_descs(fec);
|
|
if (ret)
|
|
goto err3;
|
|
|
|
edev->priv = fec;
|
|
edev->init = fec_init;
|
|
edev->send = fec_send;
|
|
edev->recv = fec_recv;
|
|
edev->halt = fec_halt;
|
|
edev->write_hwaddr = fec_set_hwaddr;
|
|
|
|
fec->eth = (struct ethernet_regs *)base_addr;
|
|
fec->bd = bd;
|
|
|
|
fec->xcv_type = CONFIG_FEC_XCV_TYPE;
|
|
|
|
/* Reset chip. */
|
|
writel(readl(&fec->eth->ecntrl) | FEC_ECNTRL_RESET, &fec->eth->ecntrl);
|
|
start = get_timer(0);
|
|
while (readl(&fec->eth->ecntrl) & FEC_ECNTRL_RESET) {
|
|
if (get_timer(start) > (CONFIG_SYS_HZ * 5)) {
|
|
printf("FEC MXC: Timeout reseting chip\n");
|
|
goto err4;
|
|
}
|
|
udelay(10);
|
|
}
|
|
|
|
fec_reg_setup(fec);
|
|
fec_set_dev_name(edev->name, dev_id);
|
|
fec->dev_id = (dev_id == -1) ? 0 : dev_id;
|
|
fec->bus = bus;
|
|
fec_mii_setspeed(bus->priv);
|
|
#ifdef CONFIG_PHYLIB
|
|
fec->phydev = phydev;
|
|
phy_connect_dev(phydev, edev);
|
|
/* Configure phy */
|
|
phy_config(phydev);
|
|
#else
|
|
fec->phy_id = phy_id;
|
|
#endif
|
|
eth_register(edev);
|
|
|
|
if (fec_get_hwaddr(edev, dev_id, ethaddr) == 0) {
|
|
debug("got MAC%d address from fuse: %pM\n", dev_id, ethaddr);
|
|
memcpy(edev->enetaddr, ethaddr, 6);
|
|
if (!getenv("ethaddr"))
|
|
eth_setenv_enetaddr("ethaddr", ethaddr);
|
|
}
|
|
return ret;
|
|
err4:
|
|
fec_free_descs(fec);
|
|
err3:
|
|
free(fec);
|
|
err2:
|
|
free(edev);
|
|
err1:
|
|
return ret;
|
|
}
|
|
|
|
struct mii_dev *fec_get_miibus(uint32_t base_addr, int dev_id)
|
|
{
|
|
struct ethernet_regs *eth = (struct ethernet_regs *)base_addr;
|
|
struct mii_dev *bus;
|
|
int ret;
|
|
|
|
bus = mdio_alloc();
|
|
if (!bus) {
|
|
printf("mdio_alloc failed\n");
|
|
return NULL;
|
|
}
|
|
bus->read = fec_phy_read;
|
|
bus->write = fec_phy_write;
|
|
bus->priv = eth;
|
|
fec_set_dev_name(bus->name, dev_id);
|
|
|
|
ret = mdio_register(bus);
|
|
if (ret) {
|
|
printf("mdio_register failed\n");
|
|
free(bus);
|
|
return NULL;
|
|
}
|
|
fec_mii_setspeed(eth);
|
|
return bus;
|
|
}
|
|
|
|
int fecmxc_initialize_multi(bd_t *bd, int dev_id, int phy_id, uint32_t addr)
|
|
{
|
|
uint32_t base_mii;
|
|
struct mii_dev *bus = NULL;
|
|
#ifdef CONFIG_PHYLIB
|
|
struct phy_device *phydev = NULL;
|
|
#endif
|
|
int ret;
|
|
|
|
#ifdef CONFIG_MX28
|
|
/*
|
|
* The i.MX28 has two ethernet interfaces, but they are not equal.
|
|
* Only the first one can access the MDIO bus.
|
|
*/
|
|
base_mii = MXS_ENET0_BASE;
|
|
#else
|
|
base_mii = addr;
|
|
#endif
|
|
debug("eth_init: fec_probe(bd, %i, %i) @ %08x\n", dev_id, phy_id, addr);
|
|
bus = fec_get_miibus(base_mii, dev_id);
|
|
if (!bus)
|
|
return -ENOMEM;
|
|
#ifdef CONFIG_PHYLIB
|
|
phydev = phy_find_by_mask(bus, 1 << phy_id, PHY_INTERFACE_MODE_RGMII);
|
|
if (!phydev) {
|
|
free(bus);
|
|
return -ENOMEM;
|
|
}
|
|
ret = fec_probe(bd, dev_id, addr, bus, phydev);
|
|
#else
|
|
ret = fec_probe(bd, dev_id, addr, bus, phy_id);
|
|
#endif
|
|
if (ret) {
|
|
#ifdef CONFIG_PHYLIB
|
|
free(phydev);
|
|
#endif
|
|
free(bus);
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
#ifdef CONFIG_FEC_MXC_PHYADDR
|
|
int fecmxc_initialize(bd_t *bd)
|
|
{
|
|
return fecmxc_initialize_multi(bd, -1, CONFIG_FEC_MXC_PHYADDR,
|
|
IMX_FEC_BASE);
|
|
}
|
|
#endif
|
|
|
|
#ifndef CONFIG_PHYLIB
|
|
int fecmxc_register_mii_postcall(struct eth_device *dev, int (*cb)(int))
|
|
{
|
|
struct fec_priv *fec = (struct fec_priv *)dev->priv;
|
|
fec->mii_postcall = cb;
|
|
return 0;
|
|
}
|
|
#endif
|