mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-16 23:18:51 +09:00
![Hou Zhiqiang](/assets/img/avatar_default.png)
Compile the routines of mpc85xx/pci.c when both FSL_PCI_INIT and DM_PCI are not enabled. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
214 lines
5.8 KiB
C
214 lines
5.8 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright 2004 Freescale Semiconductor.
|
|
* Copyright (C) 2003 Motorola Inc.
|
|
* Xianghua Xiao (x.xiao@motorola.com)
|
|
*/
|
|
|
|
/*
|
|
* PCI Configuration space access support for MPC85xx PCI Bridge
|
|
*/
|
|
#include <common.h>
|
|
#include <asm/cpm_85xx.h>
|
|
#include <pci.h>
|
|
|
|
#if !defined(CONFIG_FSL_PCI_INIT) && !defined(CONFIG_DM_PCI)
|
|
|
|
#ifndef CONFIG_SYS_PCI1_MEM_BUS
|
|
#define CONFIG_SYS_PCI1_MEM_BUS CONFIG_SYS_PCI1_MEM_BASE
|
|
#endif
|
|
|
|
#ifndef CONFIG_SYS_PCI1_IO_BUS
|
|
#define CONFIG_SYS_PCI1_IO_BUS CONFIG_SYS_PCI1_IO_BASE
|
|
#endif
|
|
|
|
#ifndef CONFIG_SYS_PCI2_MEM_BUS
|
|
#define CONFIG_SYS_PCI2_MEM_BUS CONFIG_SYS_PCI2_MEM_BASE
|
|
#endif
|
|
|
|
#ifndef CONFIG_SYS_PCI2_IO_BUS
|
|
#define CONFIG_SYS_PCI2_IO_BUS CONFIG_SYS_PCI2_IO_BASE
|
|
#endif
|
|
|
|
static struct pci_controller *pci_hose;
|
|
|
|
void
|
|
pci_mpc85xx_init(struct pci_controller *board_hose)
|
|
{
|
|
u16 reg16;
|
|
u32 dev;
|
|
|
|
volatile ccsr_pcix_t *pcix = (void *)(CONFIG_SYS_MPC85xx_PCIX_ADDR);
|
|
#ifdef CONFIG_MPC85XX_PCI2
|
|
volatile ccsr_pcix_t *pcix2 = (void *)(CONFIG_SYS_MPC85xx_PCIX2_ADDR);
|
|
#endif
|
|
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
|
|
struct pci_controller * hose;
|
|
|
|
pci_hose = board_hose;
|
|
|
|
hose = &pci_hose[0];
|
|
|
|
hose->first_busno = 0;
|
|
hose->last_busno = 0xff;
|
|
|
|
pci_setup_indirect(hose,
|
|
(CONFIG_SYS_IMMR+0x8000),
|
|
(CONFIG_SYS_IMMR+0x8004));
|
|
|
|
/*
|
|
* Hose scan.
|
|
*/
|
|
dev = PCI_BDF(hose->first_busno, 0, 0);
|
|
pci_hose_read_config_word (hose, dev, PCI_COMMAND, ®16);
|
|
reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
|
|
pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16);
|
|
|
|
/*
|
|
* Clear non-reserved bits in status register.
|
|
*/
|
|
pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff);
|
|
|
|
if (!(gur->pordevsr & MPC85xx_PORDEVSR_PCI1)) {
|
|
/* PCI-X init */
|
|
if (CONFIG_SYS_CLK_FREQ < 66000000)
|
|
printf("PCI-X will only work at 66 MHz\n");
|
|
|
|
reg16 = PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ
|
|
| PCI_X_CMD_ERO | PCI_X_CMD_DPERR_E;
|
|
pci_hose_write_config_word(hose, dev, PCIX_COMMAND, reg16);
|
|
}
|
|
|
|
pcix->potar1 = (CONFIG_SYS_PCI1_MEM_BUS >> 12) & 0x000fffff;
|
|
pcix->potear1 = 0x00000000;
|
|
pcix->powbar1 = (CONFIG_SYS_PCI1_MEM_PHYS >> 12) & 0x000fffff;
|
|
pcix->powbear1 = 0x00000000;
|
|
pcix->powar1 = (POWAR_EN | POWAR_MEM_READ |
|
|
POWAR_MEM_WRITE | (__ilog2(CONFIG_SYS_PCI1_MEM_SIZE) - 1));
|
|
|
|
pcix->potar2 = (CONFIG_SYS_PCI1_IO_BUS >> 12) & 0x000fffff;
|
|
pcix->potear2 = 0x00000000;
|
|
pcix->powbar2 = (CONFIG_SYS_PCI1_IO_PHYS >> 12) & 0x000fffff;
|
|
pcix->powbear2 = 0x00000000;
|
|
pcix->powar2 = (POWAR_EN | POWAR_IO_READ |
|
|
POWAR_IO_WRITE | (__ilog2(CONFIG_SYS_PCI1_IO_SIZE) - 1));
|
|
|
|
pcix->pitar1 = 0x00000000;
|
|
pcix->piwbar1 = 0x00000000;
|
|
pcix->piwar1 = (PIWAR_EN | PIWAR_PF | PIWAR_LOCAL |
|
|
PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP | PIWAR_MEM_2G);
|
|
|
|
pcix->powar3 = 0;
|
|
pcix->powar4 = 0;
|
|
pcix->piwar2 = 0;
|
|
pcix->piwar3 = 0;
|
|
|
|
pci_set_region(hose->regions + 0,
|
|
CONFIG_SYS_PCI1_MEM_BUS,
|
|
CONFIG_SYS_PCI1_MEM_PHYS,
|
|
CONFIG_SYS_PCI1_MEM_SIZE,
|
|
PCI_REGION_MEM);
|
|
|
|
pci_set_region(hose->regions + 1,
|
|
CONFIG_SYS_PCI1_IO_BUS,
|
|
CONFIG_SYS_PCI1_IO_PHYS,
|
|
CONFIG_SYS_PCI1_IO_SIZE,
|
|
PCI_REGION_IO);
|
|
|
|
hose->region_count = 2;
|
|
|
|
pci_register_hose(hose);
|
|
|
|
#if defined(CONFIG_TARGET_MPC8555CDS) || defined(CONFIG_TARGET_MPC8541CDS)
|
|
/*
|
|
* This is a SW workaround for an apparent HW problem
|
|
* in the PCI controller on the MPC85555/41 CDS boards.
|
|
* The first config cycle must be to a valid, known
|
|
* device on the PCI bus in order to trick the PCI
|
|
* controller state machine into a known valid state.
|
|
* Without this, the first config cycle has the chance
|
|
* of hanging the controller permanently, just leaving
|
|
* it in a semi-working state, or leaving it working.
|
|
*
|
|
* Pick on the Tundra, Device 17, to get it right.
|
|
*/
|
|
{
|
|
u8 header_type;
|
|
|
|
pci_hose_read_config_byte(hose,
|
|
PCI_BDF(0,BRIDGE_ID,0),
|
|
PCI_HEADER_TYPE,
|
|
&header_type);
|
|
}
|
|
#endif
|
|
|
|
hose->last_busno = pci_hose_scan(hose);
|
|
|
|
#ifdef CONFIG_MPC85XX_PCI2
|
|
hose = &pci_hose[1];
|
|
|
|
hose->first_busno = pci_hose[0].last_busno + 1;
|
|
hose->last_busno = 0xff;
|
|
|
|
pci_setup_indirect(hose,
|
|
(CONFIG_SYS_IMMR+0x9000),
|
|
(CONFIG_SYS_IMMR+0x9004));
|
|
|
|
dev = PCI_BDF(hose->first_busno, 0, 0);
|
|
pci_hose_read_config_word (hose, dev, PCI_COMMAND, ®16);
|
|
reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
|
|
pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16);
|
|
|
|
/*
|
|
* Clear non-reserved bits in status register.
|
|
*/
|
|
pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff);
|
|
|
|
pcix2->potar1 = (CONFIG_SYS_PCI2_MEM_BUS >> 12) & 0x000fffff;
|
|
pcix2->potear1 = 0x00000000;
|
|
pcix2->powbar1 = (CONFIG_SYS_PCI2_MEM_PHYS >> 12) & 0x000fffff;
|
|
pcix2->powbear1 = 0x00000000;
|
|
pcix2->powar1 = (POWAR_EN | POWAR_MEM_READ |
|
|
POWAR_MEM_WRITE | (__ilog2(CONFIG_SYS_PCI2_MEM_SIZE) - 1));
|
|
|
|
pcix2->potar2 = (CONFIG_SYS_PCI2_IO_BUS >> 12) & 0x000fffff;
|
|
pcix2->potear2 = 0x00000000;
|
|
pcix2->powbar2 = (CONFIG_SYS_PCI2_IO_PHYS >> 12) & 0x000fffff;
|
|
pcix2->powbear2 = 0x00000000;
|
|
pcix2->powar2 = (POWAR_EN | POWAR_IO_READ |
|
|
POWAR_IO_WRITE | (__ilog2(CONFIG_SYS_PCI2_IO_SIZE) - 1));
|
|
|
|
pcix2->pitar1 = 0x00000000;
|
|
pcix2->piwbar1 = 0x00000000;
|
|
pcix2->piwar1 = (PIWAR_EN | PIWAR_PF | PIWAR_LOCAL |
|
|
PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP | PIWAR_MEM_2G);
|
|
|
|
pcix2->powar3 = 0;
|
|
pcix2->powar4 = 0;
|
|
pcix2->piwar2 = 0;
|
|
pcix2->piwar3 = 0;
|
|
|
|
pci_set_region(hose->regions + 0,
|
|
CONFIG_SYS_PCI2_MEM_BUS,
|
|
CONFIG_SYS_PCI2_MEM_PHYS,
|
|
CONFIG_SYS_PCI2_MEM_SIZE,
|
|
PCI_REGION_MEM);
|
|
|
|
pci_set_region(hose->regions + 1,
|
|
CONFIG_SYS_PCI2_IO_BUS,
|
|
CONFIG_SYS_PCI2_IO_PHYS,
|
|
CONFIG_SYS_PCI2_IO_SIZE,
|
|
PCI_REGION_IO);
|
|
|
|
hose->region_count = 2;
|
|
|
|
/*
|
|
* Hose scan.
|
|
*/
|
|
pci_register_hose(hose);
|
|
|
|
hose->last_busno = pci_hose_scan(hose);
|
|
#endif
|
|
}
|
|
#endif /* !CONFIG_FSL_PCI_INIT */
|