u-boot-brain/drivers/misc/cros_ec_spi.c
Simon Glass d0cff03e18 dm: spi: Move slave details to child platdata
At present we go through various contortions to store the SPI slave's chip
select in its private data. This only exists when the slave is active so
must be set up when it is probed. Until the device is probed we don't
actually know what chip select it will appear on.

However, now that we can support per-child platform data, we can use that
instead. This allows us to set up the chip select when the child is bound,
and avoid the messy contortions.

Unfortunately this is a fairly large change and it seems to be difficult to
break it down further.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-01-29 17:09:56 -07:00

226 lines
5.3 KiB
C

/*
* Chromium OS cros_ec driver - SPI interface
*
* Copyright (c) 2012 The Chromium OS Authors.
*
* SPDX-License-Identifier: GPL-2.0+
*/
/*
* The Matrix Keyboard Protocol driver handles talking to the keyboard
* controller chip. Mostly this is for keyboard functions, but some other
* things have slipped in, so we provide generic services to talk to the
* KBC.
*/
#include <common.h>
#include <cros_ec.h>
#include <dm.h>
#include <errno.h>
#include <spi.h>
DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_DM_CROS_EC
int cros_ec_spi_packet(struct udevice *udev, int out_bytes, int in_bytes)
{
struct cros_ec_dev *dev = udev->uclass_priv;
#else
int cros_ec_spi_packet(struct cros_ec_dev *dev, int out_bytes, int in_bytes)
{
#endif
struct spi_slave *slave = dev_get_parentdata(dev->dev);
int rv;
/* Do the transfer */
if (spi_claim_bus(slave)) {
debug("%s: Cannot claim SPI bus\n", __func__);
return -1;
}
rv = spi_xfer(slave, max(out_bytes, in_bytes) * 8,
dev->dout, dev->din,
SPI_XFER_BEGIN | SPI_XFER_END);
spi_release_bus(slave);
if (rv) {
debug("%s: Cannot complete SPI transfer\n", __func__);
return -1;
}
return in_bytes;
}
/**
* Send a command to a LPC CROS_EC device and return the reply.
*
* The device's internal input/output buffers are used.
*
* @param dev CROS_EC device
* @param cmd Command to send (EC_CMD_...)
* @param cmd_version Version of command to send (EC_VER_...)
* @param dout Output data (may be NULL If dout_len=0)
* @param dout_len Size of output data in bytes
* @param dinp Returns pointer to response data. This will be
* untouched unless we return a value > 0.
* @param din_len Maximum size of response in bytes
* @return number of bytes in response, or -1 on error
*/
#ifdef CONFIG_DM_CROS_EC
int cros_ec_spi_command(struct udevice *udev, uint8_t cmd, int cmd_version,
const uint8_t *dout, int dout_len,
uint8_t **dinp, int din_len)
{
struct cros_ec_dev *dev = udev->uclass_priv;
#else
int cros_ec_spi_command(struct cros_ec_dev *dev, uint8_t cmd, int cmd_version,
const uint8_t *dout, int dout_len,
uint8_t **dinp, int din_len)
{
#endif
struct spi_slave *slave = dev_get_parentdata(dev->dev);
int in_bytes = din_len + 4; /* status, length, checksum, trailer */
uint8_t *out;
uint8_t *p;
int csum, len;
int rv;
if (dev->protocol_version != 2) {
debug("%s: Unsupported EC protcol version %d\n",
__func__, dev->protocol_version);
return -1;
}
/*
* Sanity-check input size to make sure it plus transaction overhead
* fits in the internal device buffer.
*/
if (in_bytes > sizeof(dev->din)) {
debug("%s: Cannot receive %d bytes\n", __func__, din_len);
return -1;
}
/* We represent message length as a byte */
if (dout_len > 0xff) {
debug("%s: Cannot send %d bytes\n", __func__, dout_len);
return -1;
}
/*
* Clear input buffer so we don't get false hits for MSG_HEADER
*/
memset(dev->din, '\0', in_bytes);
if (spi_claim_bus(slave)) {
debug("%s: Cannot claim SPI bus\n", __func__);
return -1;
}
out = dev->dout;
out[0] = EC_CMD_VERSION0 + cmd_version;
out[1] = cmd;
out[2] = (uint8_t)dout_len;
memcpy(out + 3, dout, dout_len);
csum = cros_ec_calc_checksum(out, 3)
+ cros_ec_calc_checksum(dout, dout_len);
out[3 + dout_len] = (uint8_t)csum;
/*
* Send output data and receive input data starting such that the
* message body will be dword aligned.
*/
p = dev->din + sizeof(int64_t) - 2;
len = dout_len + 4;
cros_ec_dump_data("out", cmd, out, len);
rv = spi_xfer(slave, max(len, in_bytes) * 8, out, p,
SPI_XFER_BEGIN | SPI_XFER_END);
spi_release_bus(slave);
if (rv) {
debug("%s: Cannot complete SPI transfer\n", __func__);
return -1;
}
len = min((int)p[1], din_len);
cros_ec_dump_data("in", -1, p, len + 3);
/* Response code is first byte of message */
if (p[0] != EC_RES_SUCCESS) {
printf("%s: Returned status %d\n", __func__, p[0]);
return -(int)(p[0]);
}
/* Check checksum */
csum = cros_ec_calc_checksum(p, len + 2);
if (csum != p[len + 2]) {
debug("%s: Invalid checksum rx %#02x, calced %#02x\n", __func__,
p[2 + len], csum);
return -1;
}
/* Anything else is the response data */
*dinp = p + 2;
return len;
}
#ifndef CONFIG_DM_CROS_EC
int cros_ec_spi_decode_fdt(struct cros_ec_dev *dev, const void *blob)
{
/* Decode interface-specific FDT params */
dev->max_frequency = fdtdec_get_int(blob, dev->node,
"spi-max-frequency", 500000);
dev->cs = fdtdec_get_int(blob, dev->node, "reg", 0);
return 0;
}
/**
* Initialize SPI protocol.
*
* @param dev CROS_EC device
* @param blob Device tree blob
* @return 0 if ok, -1 on error
*/
int cros_ec_spi_init(struct cros_ec_dev *dev, const void *blob)
{
int ret;
ret = spi_setup_slave_fdt(blob, dev->node, dev->parent_node,
&slave);
if (ret) {
debug("%s: Could not setup SPI slave\n", __func__);
return ret;
}
return 0;
}
#endif
#ifdef CONFIG_DM_CROS_EC
int cros_ec_probe(struct udevice *dev)
{
return cros_ec_register(dev);
}
struct dm_cros_ec_ops cros_ec_ops = {
.packet = cros_ec_spi_packet,
.command = cros_ec_spi_command,
};
static const struct udevice_id cros_ec_ids[] = {
{ .compatible = "google,cros-ec" },
{ }
};
U_BOOT_DRIVER(cros_ec_spi) = {
.name = "cros_ec",
.id = UCLASS_CROS_EC,
.of_match = cros_ec_ids,
.probe = cros_ec_probe,
.ops = &cros_ec_ops,
};
#endif