mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-19 00:18:51 +09:00
5037 lines
166 KiB
Plaintext
5037 lines
166 KiB
Plaintext
======================================================================
|
||
Changes since U-Boot 1.1.4:
|
||
======================================================================
|
||
|
||
* Minor cleanup for PCS440EP board
|
||
|
||
* Update PCS440EP port to fit into one flash device (incl. environment)
|
||
Patch by Stefan Roese, 06 Jun 2006
|
||
|
||
* Add support for PCS440EP board
|
||
Patch by Stefan Roese, 02 Jun 2006
|
||
|
||
* Fix examples/Makefile; some build targets were lost
|
||
|
||
* Fix watchdog handling in CFI flash driver
|
||
Just use udelay() when waiting for status changes which will
|
||
implicitely trigger the watchdog.
|
||
|
||
* Fix PCI to memory window size problems on PM82x boards
|
||
We use the "automatic" mode that was used for the MPC8266ADS and
|
||
MPC8272 boards. Eventually this should be used on all boards?]
|
||
Patch by Wolfgang Grandegger, 17 Jan 2006
|
||
|
||
* Correct GPIO setup (UART1/IRQ's) on yosemite & yellowstone
|
||
Patch by Stefan Roese, 29 May 2006
|
||
|
||
* Update Intel IXP4xx support
|
||
- Add IXP4xx NPE ethernet MAC support
|
||
- Add support for Intel IXDPG425 board
|
||
- Add support for Prodrive PDNB3 board
|
||
- Add IRQ support
|
||
Patch by Stefan Roese, 23 May 2006
|
||
|
||
* Fix problem in PVR detection for 440GR
|
||
Patch by Stefan Roese, 18 May 2006
|
||
|
||
* Fix gcc 3.4.x AFLAGS setting for m68k platform.
|
||
|
||
* Enable autoboot for M5271EVB board.
|
||
|
||
* Changed default ramdisk addr in yosemite/yellowstone ports
|
||
Patch by Stefan Roese, 15 May 2006
|
||
|
||
* Fix PCMCIA support on virtlab2
|
||
|
||
* Add support for VirtLab2 board
|
||
(needed because of differences in the PCMCIA hardware).
|
||
|
||
* Minor cleanup.
|
||
|
||
* Update yosemite configuration to enable flash write buffer support
|
||
Patch by Stefan Roese, 10 May 2006
|
||
|
||
* Fix compile warnings in common/xyzModem.c
|
||
Patch by Stefan Roese, 10 May 2006
|
||
|
||
* Add support for AMCC 440EP Rev C and 440GR Rev B
|
||
Patch by John Otken, 08 May 2006
|
||
|
||
* OMAP 5912/OSK: update EMIFS CS1 timings:
|
||
Problems have been seen in the linux kernel's smc91x network driver
|
||
due to improper bus timings. The latest 2.6 OMAP kernels currently
|
||
have a workaround, but this fix belongs in u-boot.
|
||
Patch by Kevin Hilman, 13 Oct 2005
|
||
|
||
* Fix REG_MPU_LOAD_TIMER definition in multiple OMAP ports
|
||
Patch by Hiroki Kaminaga, 11 Mar 2006
|
||
|
||
* Update omap5912osk board support
|
||
- Fix OMAP support that omap5912osk compiles in current source tree
|
||
- Update with code from "http://omap.spectrumdigital.com/osk5912"
|
||
to fix problems with DDR initialization
|
||
- Fix timer setup
|
||
- Use CFI flash driver and support complete 32MB of onboard flash
|
||
- Add "print_cpuinfo()" and "checkboard()" functions to display
|
||
CPU (with frequency) and Board infos
|
||
Patch by Stefan Roese, 10 May 2006
|
||
|
||
* Fix watchdog issues for ColdFire boards.
|
||
|
||
* Add M5271EVB board support.
|
||
|
||
* Make R5200 specific low level initialization board conditional.
|
||
|
||
* Update CPU target identification strings for ColdFire family.
|
||
|
||
* Update register definitions for MCF5271.
|
||
|
||
* Fix serial console support for MCF5271.
|
||
|
||
* Fixes for gcc 3.4 based m68k toolchain,
|
||
based on patch by Jate Sujjavanich.
|
||
|
||
* Fix lowboot support on MCC200 board
|
||
|
||
* Merged MPC8349ADS and MPC8349EMDS ports into MPC8349EMDS port:
|
||
- Removed MPC8349ADS port
|
||
- Added PCI support to MPC8349ADS
|
||
- reworked memory map to allow mapping of all regions with BATs
|
||
Patch by Kumar Gala, 20 Apr 2006
|
||
|
||
* Coding Style cleanup
|
||
|
||
* Write RTC seconds first to maintain settings integrity per
|
||
Maxim/Dallas DS1306 data sheet.
|
||
Patch by Alan J. Luse, 02 May 2006
|
||
|
||
* Scheduled for removal: strnicmp() which is unused
|
||
|
||
* Update for Intel Monahans boards:
|
||
- support for magic key detection and handling on delta board
|
||
- NAND support for zylonite board + some minor cleanup
|
||
|
||
* Declare load_serial_ymodem() when using CFG_CMD_LOADB.
|
||
Patch by Jon Loeliger, 01 May 2006
|
||
|
||
* Fixed handling of bad checksums with "mkimage -l"
|
||
|
||
* Added support for BC3450 board
|
||
Patch by Stefan Strobl, 21 Oct 2005
|
||
|
||
* Update for NC650 board:
|
||
- Support rev1 and rev2 hardware
|
||
- adapt to new NAND layer
|
||
- add CP850 configuration based on NC650
|
||
|
||
* MPC5200: enable snooping of DMA transactions on XLB even if no PCI
|
||
is configured; othrwise DMA accesses aren't cache coherent which
|
||
causes for example USB to fail.
|
||
|
||
* Some code cleanup
|
||
|
||
* Fix dbau1x00 boards broken by dbau1550 patch
|
||
PLL:s were not set for boards other than 1550.
|
||
Flash CFI caused card to hang due to undefined CFG_FLASH_BANKS_LIST.
|
||
Default boot is now bootp for cards other than 1550.
|
||
Patch by Thomas Lange, 10 Aug 2005
|
||
|
||
* Fixes common/cmd_flash.c:
|
||
- fix some compiler/parser error, if using m68k tool chain
|
||
- optical fix for protect on/off all messages, if using more
|
||
then one bank
|
||
Patch by Jens Scharsig, 28 Jul 2005
|
||
|
||
* Fix Quad UART mapping on MCC200 board due to new HW revision
|
||
|
||
* Fix JFFS2 support for legacy NAND driver.
|
||
|
||
* Remove dependencies between DoC code and old legacy NAND driver.
|
||
|
||
* Fix PM828_PCI target, for which PCI was *not* configured in.
|
||
|
||
* Fix Lite5200B support: initialize SDelay register
|
||
See Freescale's AN3221 "MPC5200B SDRAM Initialization and
|
||
Configuration", 3.3.1 SDelay--MBAR + 0x0190
|
||
|
||
* Changes/fixes for drivers/cfi_flash.c:
|
||
|
||
- Add Intel legacy lock/unlock support to common CFI driver
|
||
|
||
On some Intel flash's (e.g. Intel J3) legacy unlocking is
|
||
supported, meaning that unlocking of one sector will unlock
|
||
all sectors of this bank. Using this feature, unlocking
|
||
of all sectors upon startup (via env var "unlock=yes") will
|
||
get much faster.
|
||
|
||
- Fixed problem with multiple reads of envronment variable
|
||
"unlock" as pointed out by Reinhard Arlt & Anders Larsen.
|
||
|
||
- Removed unwanted linefeeds from "protect" command when
|
||
CFG_FLASH_PROTECTION is enabled.
|
||
|
||
- Changed p3p400 board to use CFG_FLASH_PROTECTION
|
||
|
||
Patch by Stefan Roese, 01 Apr 2006
|
||
|
||
* Changes/fixes for drivers/cfi_flash.c:
|
||
- Correctly handle the cases where CFG_HZ != 1000 (several
|
||
XScale-based boards)
|
||
- Fix the timeout calculation of buffered writes (off by a
|
||
factor of 1000)
|
||
Patch by Anders Larsen, 31 Mar 2006
|
||
|
||
* Updates to common PPC4xx onboard (DDR)SDRAM init code (405 and 440)
|
||
|
||
405 SDRAM: - The SDRAM parameters can now be defined in the board
|
||
config file and the 405 SDRAM controller values will
|
||
be calculated upon bootup (see PPChameleonEVB).
|
||
When those settings are not defined in the board
|
||
config file, the register setup will be as it is now,
|
||
so this implementation should not break any current
|
||
design using this code.
|
||
|
||
Thanks to Andrea Marson from DAVE for this patch.
|
||
|
||
440 DDR: - Added function sdram_tr1_set to auto calculate the
|
||
TR1 value for the DDR.
|
||
- Added ECC support (see p3p440).
|
||
|
||
Patch by Stefan Roese, 17 Mar 2006
|
||
|
||
* Fix CONFIG_SKIP_LOWLEVEL_INIT dependency in cpu/arm920t/start.S
|
||
Patch by Peter Menzebach, 13 Oct 2005 [DNX#2006040142000473]
|
||
|
||
* Add support for ymodem protocol download
|
||
Patch by Stefano Babic, 29 Mar 2006
|
||
|
||
* Memory Map Update for Delta board: U-Boot is at 0x80000000-0x84000000
|
||
Merge from Markus Klotzb<7A>cher's repo, 01 Apr 2006
|
||
|
||
* GCC-4.x fixes: clean up global data pointer initialization for all
|
||
boards
|
||
|
||
* Update for Delta board:
|
||
- redundant NAND environment
|
||
- misc Monahans cleanups (remove dead code etc.)
|
||
- DA9030 Initialization; some minimal changes to PXA I2C driver to
|
||
make it work with the Monahans.
|
||
- Make Monahans clock frequency configurable using
|
||
CFG_MONAHANS_RUN_MODE_OSC_RATIO and
|
||
CFG_MONAHANS_TURBO_RUN_MODE_RATIO.
|
||
Merge from Markus Klotzb<7A>cher's repo, 25 Mar 2006
|
||
|
||
* Enable Quad UART om MCC200 board.
|
||
|
||
* Cleanup MCC200 board configuration; omit non-existent stuff.
|
||
|
||
* Add support for MPC859/866 Rev. A.0
|
||
|
||
* Add command for handling DDR ECC registers on MPC8349EE MDS board.
|
||
|
||
* Fix DDR ECC bit definitions for MPC83xx.
|
||
|
||
* Add initial support for MPC8349E MDS board.
|
||
|
||
* Add support for ECC DDR initialization on MPC83xx.
|
||
|
||
* Add DMA support for MPC83xx.
|
||
|
||
* Add sync in do_reset() routine for MPC83xx after RPR register
|
||
was written to. It is need on some targets when BAT translation
|
||
is enabled.
|
||
|
||
* Add bit definitions for MPC83xx DDR controller registers.
|
||
|
||
* Add Dcbz(), Dcbi() and Dcbf() routines for MPC83xx.
|
||
|
||
* Correct shift offsets in icache_status and dcache_status for MPC83xx.
|
||
|
||
* Add support for DS1374 RTC chip.
|
||
|
||
* Add support for Lite5200B board.
|
||
Patch by Patch by Jose Maria (Txema) Lopez, 16 Jan 2006
|
||
|
||
* Apply SoC concept to arm926ejs CPUs, i.e. move the SoC specific
|
||
timer and cpu_reset code from cpu/$(CPU) into the new
|
||
cpu/$(CPU)/$(SOC) directories
|
||
Patch by Andreas Engel, 13 Mar 2006
|
||
|
||
* Change max size of uncompressed uImage's to 8MByte and add
|
||
CFG_BOOTM_LEN to adjust this setting.
|
||
|
||
As mentioned by Robin Getz on 2005-05-24 the size of uncompressed
|
||
uImages was restricted to 4MBytes. This default size is now
|
||
increased to 8Mbytes and can be overrided by setting CFG_BOOTM_LEN
|
||
in the board config file.
|
||
|
||
Patch by Stefan Roese, 13 Mar 2006
|
||
|
||
* Fix problem with updated PCI code in cpu/ppc4xx/405gp_pci.c
|
||
Patch by Stefan Roese, 13 Mar 2006
|
||
|
||
* cpu/ppc4xx/start.S : exceptions are enabled after relocation
|
||
Patch by Cedric Vincent, 06 Jul 2005
|
||
|
||
* au1x00_eth.c: check malloc return value and abort if it failed
|
||
Patch by Andrew Dyer, 26 Jul 2005
|
||
|
||
* Change the sequence of events in soft_i2c.c:send_ack() to keep from
|
||
incorrectly generating start/stop conditions on the bus.
|
||
Patch by Andrew Dyer, 26 Jul 2005
|
||
|
||
* Fix bug in [id]cache_status commands for MPC85xx processors;
|
||
should look at LSB of L1CSRn registers to determine if L1 cache is
|
||
enabled, not the MSB.
|
||
Patch by Murray Jensen, 19 Jul 2005
|
||
|
||
* Fix array overflow with fw_setenv on uninitialised environment
|
||
Patch by Murray Jensen, 15 Jul 2005
|
||
|
||
* Add support for EmbeddedPlanet EP88x boards
|
||
Patch by Yuli Barcohen, 13 Jul 2005
|
||
|
||
* Remove board specific configuration includes from the common xilinx
|
||
ethernet and iic adapter code.
|
||
Patch by Michael Libeskind, 12 Jul 2005
|
||
|
||
* Add Nat Semi DP83865 PHY support to MPC85xx TSEC driver
|
||
Patch by Murray Jensen, 08 Jul 2005
|
||
|
||
* Add (some) definitions for the MPC85xx local bus controller
|
||
Patch by Murray Jensen, 08 Jul 2005
|
||
|
||
* Add CPM2 I/O pin functions for MPC85xx processors
|
||
Patch by Murray Jensen, 08 Jul 2005
|
||
|
||
* Fix compile problem
|
||
|
||
* Added PCI support for MPC8349ADS board
|
||
Patch by Kumar Gala 11 Jan 2006
|
||
|
||
* Enable address translation on MPC83xx
|
||
Patch by Kumar Gala, 10 Feb 2006
|
||
|
||
* Decopuled setting of OR/BR and LBLAWBAR/LBLAWAR on MPC83xx
|
||
Patch by Kumar Gala, 25 Jan 2006
|
||
|
||
* Fixed defines for MPC83xx SICRL register to match current specs
|
||
Patch by Kumar Gala, 23 Jan 2006
|
||
|
||
* Only disable the MPC83xx watchdog if its enabled out of reset.
|
||
If its disabled out of reset SW can later enable it if so desired
|
||
Patch by Kumar Gala, 11 Jan 2006
|
||
|
||
* Allow config of GPIO direction & data registers at boot on 83xx
|
||
Patch by Kumar Gala, 11 Jan 2006
|
||
|
||
* Enable time handling on 83xx
|
||
Patch by Kumar Gala, 11 Jan 2006
|
||
|
||
* Make System IO Config Registers board configurable on MPC83xx
|
||
Patch by Kumar Gala, 11 Jan 2006
|
||
|
||
* Fixed PCI indirect config ops to handle multiple PCI controllers
|
||
We need to adjust the bus number we are trying to access based
|
||
on which PCI controller its on
|
||
Patch by Kumar Gala, 12 Jan 2006
|
||
|
||
* Report back PCI bus when doing table based device config
|
||
Patch by Kumar Gala, 11 Jan 2006
|
||
|
||
* Added support for PCI prefetchable region and BARs
|
||
If a host controller sets up a region as prefetchable and
|
||
a device's BAR denotes it as prefetchable, allocate the
|
||
BAR into the prefetch region.
|
||
|
||
If a BAR is prefetchable and no prefetchable region has
|
||
been setup by the controller we fall back to allocating
|
||
the BAR into the normally memory region.
|
||
Patch by Kumar Gala, 11 Jan 2006
|
||
|
||
* Add helper function for generic flat device tree fixups for mpc83xx
|
||
Patch by Kumar Gala, 11 Jan 2006
|
||
|
||
* Add support for passing initrd information via flat device tree
|
||
Patch by Kumar Gala, 11 Jan 2006
|
||
|
||
* Added OF_STDOUT_PATH and OF_SOC
|
||
|
||
OF_STDOUT_PATH specifies the path to the device the kernel can use
|
||
for console output
|
||
|
||
OF_SOC specifies the proper name of the SOC node if one exists.
|
||
Patch by Kumar Gala, 11 Jan 2006
|
||
|
||
* Allow board code to fixup the flat device tree before booting a kernel
|
||
Patch by Kumar Gala, 11 Jan 2006
|
||
|
||
* Added CONFIG_ options for bd_t and env in flat dev tree
|
||
|
||
CONFIG_OF_HAS_BD_T will put a copy of the bd_t
|
||
into the resulting flat device tree.
|
||
|
||
CONFIG_OF_HAS_UBOOT_ENV will copy the environment
|
||
variables from u-boot into the flat device tree
|
||
|
||
Patch by Kumar Gala, 11 Jan 2006
|
||
|
||
* Add support for the DHCP vendor optional bootfile (#67).
|
||
Ignores the vendor TFTP server name option (#66).
|
||
Patch by Murray Jensen, 30 Jun 2005
|
||
|
||
* Fix a HW timing issue on 8548 CDS for eTSEC 3 in RGMII mode
|
||
Patch by Andy Fleming, 14 Jun 2005
|
||
|
||
* Fix bad register definitions for LTX971 PHY on MPC85xx boards.
|
||
Patch by Gerhard Jaeger, 21 Jun 2005
|
||
|
||
* Add netconsole and some more commands to RPXlite_DW board
|
||
Patch by Sam Song, 19 Jun 2005
|
||
|
||
* Fix bad declaration on pci_cfgfunc_nothing
|
||
Patch by Sam Song, 19 Jun 2005
|
||
|
||
* Adjust "echo" as a default command
|
||
Patch by Sam Song, 19 Jun 2005
|
||
|
||
* Fix PCIDF calculation in cpu/mpc8260/speed.c for MPC8280EC
|
||
Patch by KokHow Teh, 16 Jun 2005
|
||
|
||
* Add crc of data to jffs2 (in jffs2_1pass_build_lists()).
|
||
Patch by Rick Bronson, 15 Jun 2005
|
||
|
||
* Coding Style cleanup
|
||
|
||
* Avoid dereferencing NULL in find_cmd() if no valid commands were found
|
||
Patch by Andrew Dyer, 13 Jun 2005
|
||
|
||
* Add ADI Blackfin support
|
||
- add support for Analog Devices Blackfin BF533 CPU
|
||
- add support for the ADI BF533 Stamp uClinux board
|
||
- add support for the ADI BF533 EZKit board
|
||
Patches by Richard Klingler, 11 Jun 2005
|
||
|
||
* Add loads of ntohl() in image header handling
|
||
Patch by Steven Scholz, 10 Jun 2005
|
||
|
||
* Switch MPC86xADS and MPC885ADS boards to use cpuclk environment
|
||
variable to set clock
|
||
Patch by Yuli Barcohen, 05 Jun 2005
|
||
|
||
* RPXlite configuration fixes
|
||
- Use correct flash sector size
|
||
- Use correct memory test end address
|
||
- Add support for bzip2 compression
|
||
- Various small fixes
|
||
Patch by Yuli Barcohen, 05 Jun 2005
|
||
|
||
* Memory configuration changes for ZPC.1900 board
|
||
- Fix SDRAM timing on both local bus and 60x bus
|
||
- Add support for second flash bank (SIMM)
|
||
- Change boot flash base
|
||
Patch by Yuli Barcohen, 05 Jun 2005
|
||
|
||
* Add support for Adder boards with 16MB SDRAM;
|
||
add support for second FEC on Adder87x board.
|
||
Patch by Yuli Barcohen, 05 Jun 2005
|
||
|
||
* Fix conditional for including ks8695eth driver
|
||
Patch by Greg Ungerer, 04 Jun 2005
|
||
|
||
* Fix Makefile: include config.mk only after CROSS_COMPILE is defined
|
||
Patch by Friedrich Lobenstock, 02 Jun 2005
|
||
|
||
* Fix comment in common/soft_i2c.c
|
||
Patches by Peter Korsgaard/Tolunay Orkun, 26 May 2005
|
||
|
||
* Cleanup compiler warnings.
|
||
Patch by Greg Ungerer, 21 May 2005
|
||
|
||
* Word alignment fixes for word aligned NS16550 UART
|
||
Patch by Jean-Paul Saman, 01 Mar 2005
|
||
|
||
Fixes bug with UART that only supports word aligned access: removed
|
||
"__attribute__ ((packed));" for "(CFG_NS16550_REG_SIZE == 4)" some
|
||
(broken!) versions of GCC generate byte accesses when encountering
|
||
the packed attribute regardless if the struct is already correctly
|
||
aligned for a platform. Peripherals that can only handle word
|
||
aligned access won't work properly when accessed with byte access.
|
||
The struct NS16550 is already word aligned for REG_SIZE = 4, so
|
||
there is no need to packed the struct in that case.
|
||
|
||
* Fix behaviour if gatewayip is not set
|
||
Patch by Robin Gilks, 23 Dec 2004
|
||
|
||
* Fix cleanup for netstart board.
|
||
Remove build results from repository
|
||
|
||
* Some code cleanup for GCC 4.x
|
||
|
||
* Fixes to support environment in NAND flash;
|
||
enable NAND flash based environment for delta board.
|
||
|
||
* Add support for Intel Monahans CPU on Zylonite and Delta boards
|
||
(This is Work in Progress!)
|
||
|
||
* Add support for TQM8260-AI boards.
|
||
|
||
* Minor code cleanup
|
||
|
||
* Merge the new NAND code (testing-NAND brach); see doc/README.nand
|
||
Rewrite of NAND code based on what is in 2.6.12 Linux kernel
|
||
Patch by Ladislav Michl, 29 Jun 2005
|
||
|
||
* Add lowboot target to mcc200 board
|
||
Patch by Stefan Roese, 4 Mar 2006
|
||
|
||
* Fix problem with flash_get_size() from CFI driver update
|
||
Patch by Stefan Roese, 1 Mar 2006
|
||
|
||
* Make CFG_NO_FLASH work on ARM systems
|
||
Patch by Markus Klotzbuecher, 27 Feb 2006
|
||
|
||
* Update mcc200 config: Disable PCI and DoC, use 133 MHz IPB clock,
|
||
use hush shell.
|
||
|
||
* Convert mcc200 to use common CFI flash driver
|
||
Patch by Stefan Roese, 28 Feb 2006
|
||
|
||
* Add env-variable "unlock" to handle initial state of sectors
|
||
(locked/unlocked).
|
||
|
||
Only the U-Boot image and it's environment is protected,
|
||
all other sectors are unprotected (unlocked) if flash
|
||
hardware protection is used (CFG_FLASH_PROTECTION) and
|
||
the environment variable "unlock" is set to "yes".
|
||
|
||
Patch by Stefan Roese, 28 Feb 2006
|
||
|
||
* Update drivers/cfi_flash.c:
|
||
- find_sector() called in both versions of flash_write_cfiword()
|
||
Patch by Peter Pearse, 27th Feb 2006
|
||
|
||
* CFI support for a x8/x16 AMD/Spansion flash configured in x8 mode
|
||
Patch by Jose Maria Lopez, 16 Jan 2006
|
||
|
||
* Add support for AMD/Spansion Flashes in flash_write_cfibuffer
|
||
Patch by Alex Bastos and Thomas Schaefer, 2005-08-29
|
||
|
||
* Changes/fixes for drivers/cfi_flash.c:
|
||
We *should* check if there are any error bits if the previous call
|
||
returned ERR_OK (Otherwise we will have output an error message in
|
||
flash_status_check() already.) The original code would only check for
|
||
error bits if flash_status_check() returns ERR_TIMEOUT.
|
||
Patch by Marcus Hall, 23 Aug 2005
|
||
|
||
* Changes/fixes for drivers/cfi_flash.c:
|
||
- Add CFG_FLASH_PROTECT_CLEAR on drivers/cfi_flash.c
|
||
- Prohibit buffer write when buffer_size is 1 on drivers/cfi_flash.c
|
||
Patch by Sangmoon Kim, 19 Aug 2005
|
||
|
||
* Fixes for drivers/cfi_flash.c:
|
||
- Fix wrong timeout value usage in flash_status_check()
|
||
- Round write_tout up when converting to msec in flash_get_size()
|
||
- Remove clearing flash status at the end of flash_write_cfibuffer()
|
||
which sets Intel 28F640J3 flash back to command mode on CSB472
|
||
Patch by Tolunay Orkun, 02 July 2005
|
||
|
||
* Add basic support for the SMMACO4 Board from PanDaCom.
|
||
Patch by Heiko Schocher, 20 Feb 2006
|
||
|
||
* Add GIT version information (commid ID) to untagged U-Boot versions
|
||
|
||
As done in the linux kernel, the U-Boot version (U_BOOT_VERSION)
|
||
of all unreleased (untagged) U-Boot images will be automatically
|
||
extended upon compiletime with a part of the GIT commit ID and
|
||
possibly with "dirty" if uncommited changes are detected.
|
||
|
||
Here an example for the resulting version:
|
||
"U-Boot 1.1.4-g3457ac18-dirty"
|
||
|
||
The version is now maintained in the toplevel Makefile and the
|
||
version headers are autogenerated.
|
||
|
||
Patch by Stefan Roese, 9 Feb 2006
|
||
|
||
* Update default environment for INKA4x00 board.
|
||
|
||
* Convert CPCI750 to use common CFI flash driver
|
||
Patch by Reinhard Arlt, 8 Feb 2006
|
||
|
||
* Various changes to esd HH405 board specific files
|
||
Patch by Matthias Fuchs, 07 Feb 2006
|
||
|
||
* Cleanup U-Boot boot messages on ARM.
|
||
|
||
To match the U-Boot user interface on ARM platforms to the U-Boot
|
||
standard (as on PPC platforms), some messages with debug character
|
||
are removed from the default U-Boot build.
|
||
Enable DEBUG for lib_arm/board.c to enable debug messages.
|
||
New CONFIG_DISPLAY_CPUINFO and CONFIG_DISPLAY_BOARDINFO options.
|
||
Patch by Stefan Roese, 24 Jan 2006
|
||
|
||
* Fix various compiler warnings on ppc4xx builds (ELDK 4.0)
|
||
Patch by Stefan Roese, 18 Jan 2006
|
||
|
||
* Add VGA support (CT69000) to CPCI750 board.
|
||
Insert missing __le32_to_cpu() for filesize in ext2fs_read_file().
|
||
Patch by Reinhard Arlt, 30 Dec 2005
|
||
|
||
* PMC405 and CPCI405: Moved configuration of pci resources
|
||
into config file.
|
||
PMC405 and CPCI2DP: Added firmware download and booting via pci.
|
||
Patch by Matthias Fuchs, 20 Dec 2005
|
||
|
||
* Add ColdFire targets to MAKEALL script
|
||
Patch by Zachary Landau, 26 Jan 2006
|
||
|
||
* Add support for r5200 board
|
||
Patch by Zachary Landau, 26 Jan 2006
|
||
|
||
* Add support for Freescale M5271 processor
|
||
Patch by Zachary Landau, 26 Jan 2006
|
||
|
||
* Fix 28F256J3A support on PM520 board
|
||
(without bank-switching only 32 MB can be accessed)
|
||
|
||
* Fix mkimage bug with multifile images created on 64 bit systems.
|
||
|
||
* Add support for 28F256J3A flash (=> 64 MB) on PM520 board
|
||
|
||
* Fix compiler problem with at91rm9200dk board.
|
||
Patch by Eugen Bigz, 19 Dec 2005
|
||
|
||
======================================================================
|
||
Changes for U-Boot 1.1.4:
|
||
======================================================================
|
||
|
||
* Changes to Yellowstone & Yosemite 440EP/GR eval boards:
|
||
- Changed GPIO setup to enable another address line in order to
|
||
address 64M of FLASH.
|
||
- Added function sdram_tr1_set to auto calculate the tr1 value for
|
||
the DDR.
|
||
Patch by Steven Blakeslee, 12 Dec 2005
|
||
|
||
* MPC5200: Set PCI retry counter to 0 = infinite retry;
|
||
The default of 255 is too short for slow devices.
|
||
Patch by Martin Nykodym, 12 Dec 2005
|
||
|
||
* Change port configuration for O2DNT (CODEC1 on PSC1).
|
||
|
||
* Fix register for PCI async mode on PPC440EP
|
||
Patch by Youngchul Bang, 08 Dec 2005
|
||
|
||
* Fix U-Boot linking problems (add .eh_frame segment to linker script)
|
||
This segment may be required by some libgcc.a functions
|
||
(like _udivdi3).
|
||
|
||
* Fix DPRAM offset/size for MPC8541/8555.
|
||
Simplify TQM85xx Makefile handling.
|
||
|
||
* Fix data overflow (typo?) in rtc/ds1302.c
|
||
|
||
* Fix U-Boot compilation for MIPS boards using ELDK 4.0
|
||
|
||
* Add support for TQM8541/8555 boards, TQM85xx support reworked:
|
||
- Support for TQM8541/8555 boards added.
|
||
- Complete rework of TQM8540/8560 support.
|
||
- Common TQM85xx code now supports all current TQM85xx platforms
|
||
(TQM8540/8541/8555/8560).
|
||
- DDR SDRAM size detection added.
|
||
- CAS latency default values can be overwritten by setting "serial#"
|
||
to e.g. "ABC0001 casl=25" -> CAS latency 2.5 will be used.
|
||
If problems are detected with this non default CAS latency,
|
||
the default values will be used instead.
|
||
- Flash size detection added.
|
||
- Moved FCC ethernet driver initialization behind TSEC driver init
|
||
-> TSEC is first device.
|
||
Patch by Stefan Roese, 30 Nov 2005
|
||
|
||
* Add support for AMCC 440SP, add support for AMCC Luan 440SP eval board.
|
||
Patch by John Otken, 23 Nov 2005
|
||
|
||
* Changed PPC44x startup message (cpu info, speed...) to common style:
|
||
On PPC44x platforms, the startup message generated in "cpu.c" only
|
||
comprised the ppc type and revision but not additional information
|
||
like speed etc. Those speed infos where printed in the board specific
|
||
code. This new implementation now prints all CPU infos in the common
|
||
cpu specific code. No board specific code is needed anymore and
|
||
therefore removed from all current 44x implementations.
|
||
Patch by Stefan Roese, 27 Nov 2005
|
||
|
||
* Adjust TQM834x PHY addresses for latest hardware revision.
|
||
|
||
* Increase malloc arena on TQM5200 board to 256 kB.
|
||
With 64 kb uniform flash sector size the old value of 128 kB was
|
||
too small.
|
||
|
||
* Fix miiphy global data initialization (problem on 4xx boards when
|
||
no ethaddr is assigned). Initialization moved from
|
||
miiphy_register() to eth_initialize().
|
||
|
||
Based on initial patch for 4xx platform by Matthias Fuchs.
|
||
|
||
* Remove unnnecessary #include <linux/types.h> from include/asm-*/u-boot.h
|
||
|
||
* Allow use of include/image.h and include/asm-*/u-boot.h in proprietary code.
|
||
The COPYING file was extended to make clear that these files can be
|
||
used in non-GPL code, too.
|
||
Also, a corresponding note was placed in the headers of the affected files.
|
||
|
||
* Add support for Prodrive P3P440 board:
|
||
- Added onboard PPC440 DDR autodetection in cpu/ppc/sdram.c
|
||
- CFG_FLASH_QUIET_TEST added to use the common CFI driver
|
||
for bank autodetection
|
||
Patch by Stefan Roese, 22 Nov 2005
|
||
|
||
* Change all '$(...)' variable references into '${...}'
|
||
which makes the environment compatible with the hush shell.
|
||
WARNING: Support for the old '$(...)' syntax will be
|
||
discontinued in a later version.
|
||
|
||
* Minor changes to init flags in TQM834x PCI.
|
||
|
||
* Fix Bamboo DDR SDRAM initialization (problem with onboard SDRAM)
|
||
Patch by Stefan Roese, 15 Nov 2005
|
||
|
||
* New PPC 405EP board added: CMS700
|
||
Added CONFIG_NET_MULTI for VOM405 board.
|
||
Added reset_phy() for VOM405 board.
|
||
Patch by Matthias Fuchs, 09 Nov 2005
|
||
|
||
* Updated PCI mapping for esd CPCI2DP board.
|
||
Add support for error LED.
|
||
Patch by Matthias Fuchs, 07 Nov 2005
|
||
|
||
* Fix MPC85xx PCI support (pci_register_hose() before pci config access)
|
||
Patch by Stefan Roese, 07 Nov 2005
|
||
|
||
* Correct PPC Timebase register definitions (SPRN_TBRL...)
|
||
Patch by Stefan Roese, 07 Nov 2005
|
||
|
||
* Adjust bd->bi_flashstart on Yellowstone & Yosemite to correct size
|
||
Patch by Stefan Roese, 05 Nov 2005
|
||
|
||
* Additional fix for external IRQ config on Yellowstone & Yosemite
|
||
Patch by Stefan Roese, 03 Nov 2005
|
||
|
||
* Add support for Ocotea pass 3 with 440GX Rev. F
|
||
Patch by Stefan Roese, 01 Nov 2005
|
||
|
||
* Fix external IRQ configuration on Yellowstone & Yosemite
|
||
Patch by Stefan Roese, 28 Oct 2005
|
||
|
||
* Add support for multiple PHYs.
|
||
Tested on the following boards:
|
||
cmcpu2 (at91rm9200/ether.c)
|
||
PPChameleon (ppc4xx/4xx_enet.c)
|
||
yukon (mpc8220/fec.c)
|
||
uc100 (mpc8xx/fec.c)
|
||
tqm834x (mpc834x/tsec.c) with EEPRO100
|
||
lite5200 (mpc5xxx/fec.c) with EEPRO100 card (drivers/eepro100.c)
|
||
Main changes include:
|
||
common/miiphyutil.c
|
||
- miiphy_register routine was added to allow multiple PHYs to be registered
|
||
- miiphy_read and miiphy_write are now defined in this file, and
|
||
require additional argument (char *devname)
|
||
- other miiphy_* routines also require additional device name argument
|
||
../lib_i386/board.c
|
||
../lib_ppc/board.c
|
||
Calling reset_phy() was moved to be executed *after* eth_initialize().
|
||
This is necessary as now some of the implementations of reset_phy()
|
||
may need to use miiphy_reset() which is not allowed before eth_initialize()
|
||
as eth_initialize registers all required miiphy_* routines.
|
||
Tested on IP860 and PHY initializes properly after this change.
|
||
|
||
* Correct includes for flat tree builder.
|
||
|
||
* Fix conflicting types (flash_write()) in trab auto_update.c.
|
||
|
||
* Add PCI support for the TQM834x board.
|
||
|
||
* Add missing 4xx board to MAKEALL
|
||
Patch by Stefan Roese, 20 Oct 2005
|
||
|
||
* Fix conflicting types (flash_write()) in esd auto_update.c
|
||
Patch by Stefan Roese, 20 Oct 2005
|
||
|
||
* Fix problem with sleep in NetConsole (use get_timer())
|
||
Patch by Stefan Roese, 20 Oct 2005
|
||
|
||
* Add NetConsole Support for AMCC eval boards
|
||
Patch by Stefan Roese, 20 Oct 2005
|
||
|
||
* Fix NetConsole support on 4xx (only print eth link on 1st transfer)
|
||
Patch by Stefan Roese, 18 Oct 2005
|
||
|
||
* Add fat & ext2 support to AMCC 440EP boards Yosemite & Bamboo.
|
||
Fix identation on ext2ls help entry.
|
||
Patch by Stefan Roese, 14 Oct 2005
|
||
|
||
* Add support for TQM834x boards.
|
||
Cleanup.
|
||
|
||
* Cleanup for GCC-4.x
|
||
|
||
* Add documentation for Open Firmware Flat Tree and usage.
|
||
Patch by Pantelis Antoniou, 13 Oct 2005
|
||
|
||
* Add missing files for Pantelis Antoniou's patch
|
||
Patch by Pantelis Antoniou, 04 Sep 2005
|
||
|
||
* Fix problem in ppc4xx eth-driver without ethaddr (only without
|
||
CONFIG_NET_MULTI set)
|
||
Patch by Stefan Roese, 10 Oct 2005
|
||
|
||
* Fix gzip bmp support (test if malloc fails, warning when truncated).
|
||
Increase CFG_VIDEO_LOGO_MAX_SIZE on HH405 board.
|
||
Patch by Stefan Roese, 07 Oct 2005
|
||
|
||
* Add support for OF flat tree for the STXtc board.
|
||
Patch by Pantelis Antoniou, 04 Sep 2005
|
||
|
||
* Support passing of OF flat trees to the kernel.
|
||
Patch by Pantelis Antoniou, 04 Sep 2005
|
||
|
||
* Cleanup
|
||
|
||
* Add support for NetSilicon NS7520 processor.
|
||
Patch by Art Shipkowski, 12 May 2005
|
||
|
||
* Add support for AP1000 board.
|
||
Patch by James MacAulay, 07 Oct 2005
|
||
|
||
* Eliminate hard-coded address of Ethernet transfer buffer on at91rm9200
|
||
Patch by Anders Larsen, 07 Oct 2005
|
||
|
||
The Atmel errata #11 states that the transfer buffer descriptor
|
||
table must be aligned on a 16-word boundary. As it turned out, this
|
||
is insufficient - it seems the table must be aligned on a boundary
|
||
at least as large as the table itself (in Linux this is not an
|
||
issue - the table is aligned on a PAGE_SIZE (4096) boundary).
|
||
|
||
* Fixed compilation for ARM when using a (standard) hard-FP toolchain
|
||
Patch by Anders Larsen, 07 Oct 2005
|
||
|
||
* Cleanup warnings for cpu/arm720t & cpu/arm1136 files.
|
||
sed the linker scripts, rather than pre-process them.
|
||
Patch by Peter Pearse, 07 Oct 2005
|
||
|
||
* Update make target for ARM supported boards.
|
||
Use lowlevel_init() instead of platformsetup() [rename].
|
||
Patch by Peter Pearse, 06 Oct 2005
|
||
|
||
* Fix booting from serial dataflash on AT91RM9200
|
||
Patch by Peter Menzebach, 29 Aug 2005
|
||
|
||
* Add JFFS2 support for TRAB board
|
||
Patch by Martin Krause, 25 Aug 2005
|
||
|
||
* Remove unnecessary dependency of netconsole on CONFIG_NET_MULTI
|
||
Patch by Marcus Hall, 24 Aug 2005
|
||
|
||
* Fix the machine-id of the Cogent csb637 board
|
||
Patch by Anders Larsen, 05 Oct 2005
|
||
|
||
* Complete support for the KwikByte KB920x boards
|
||
Patch by Anders Larsen, 05 Oct 2005
|
||
|
||
* Set the AT91RM9200 clock to asynchronous mode
|
||
Patch by Anders Larsen, 03 May 2005
|
||
|
||
* Set the AT91RM9200 clock to synchronous mode
|
||
Patch by Anders Larsen, 29 Apr 2005
|
||
|
||
* Add support for Cogent csb637
|
||
Patch by Anders Larsen, 29 Apr 2005
|
||
|
||
* Fix dm9161.c initialization
|
||
Patch by Anders Larsen, 29 Apr 2005
|
||
|
||
* Fix problems introduced by Patch by Steven Scholz, 02 Mar 2005
|
||
(8e2be51de8dd03c1ce4d06cbb18ad06133d47cd5)
|
||
|
||
* Move dm9161.c and lxt972.c into cpu/arm920t/at91rm9200
|
||
Patch by Anders Larsen, 29 Apr 2005
|
||
|
||
* Fix device partition intialization for SystemACE disks.
|
||
Patch by Stephen Williams, 28 Apr 2005
|
||
|
||
* Added support for KwikByte KB920x boards (based on AT91RM9200)
|
||
Patch by Matt ?? <kb9200_dev@kwikbyte.com>, 27 Apr 2005
|
||
|
||
* Add support for S29GL064M-R3 flash chip on xsengine board
|
||
Patch by Kurt Stremerch, 18 Apr 2005
|
||
|
||
* E500 update: repoint IVPR to RAM when code is relocated
|
||
Patch by Kylo Ginsberg, 13 Apr 2005
|
||
|
||
* Fix loop end test in lib_generic/string.c:strswab()
|
||
Patch by Andrew Dyer, October 10, 2005
|
||
Signed-off-by: Andrew Dyer <amdyer@gmail.com>
|
||
|
||
* Cleanup
|
||
|
||
* Update ARM Integrator boards:
|
||
Correct addessing errors in platform files.
|
||
Split off common core module data from Integrator header files to
|
||
include/armcoremodule.h.
|
||
Patch by Peter Pearse, 04 Oct 2005
|
||
|
||
* Make sure only supported compiler options are used
|
||
Import "cc-option" shell function from kernel and
|
||
use it to get the correct ARM GCC options for individual CPUs
|
||
Patch by Peter Pearse, 30 Jun 2005
|
||
|
||
* Fix 440GR to print correct cpu revision
|
||
Patch by Stefan Roese, 04 Oct 2005
|
||
|
||
* Change board message on AMCC Yosemite & Yellowstone to common style
|
||
Patch by Stefan Roese, 03 Oct 2005
|
||
|
||
* Fix compiler warning
|
||
|
||
* Fix FEC PHY addresses for TQM85xx boards
|
||
|
||
* Fix uninitialized variable problem in hush shell
|
||
Patch by Lars Rostock, 26 Sep 2005
|
||
|
||
* Undo change of f6e20fc6ca... to include/configs/trab.h
|
||
(Must have been an accident?)
|
||
|
||
* Add support for AT91RM9200 OHCI Controller.
|
||
Patch by Eric Benard, 07 Apr 2005
|
||
|
||
* Update ARM mach-types.h
|
||
Patch by Eric Benard, 07 Apr 2005
|
||
|
||
* Add support for MP2USB board.
|
||
Patch by Eric Benard, 07 Apr 2005
|
||
|
||
* Add board support for armadillo HT1070
|
||
Patch by Rowel Atienza, 06 Apr 2005
|
||
|
||
* Second Ethernet address enabled for MPC885ADS and MPC8272ADS.
|
||
Patch by Vitaly Bordug, 30 Mar 2005
|
||
|
||
* Add iopset command on mpc8xx
|
||
Patch by Daniel Eisenhut, 25 Mar 2005
|
||
|
||
* Add support for MII in eepro100 driver.
|
||
Patch by Gleb Natapov, 21 Mar 2005
|
||
|
||
* Fixes to the Lubbock (PXA 25x) support:
|
||
- Resolve the FIXME with respect to saving the u-boot environment.
|
||
- Make the default load address land in real memory.
|
||
- Fix lan91c96 SMC_{in,out}{b,w,l}() macros
|
||
Patch by David Brownell, 10 Mar 2005
|
||
|
||
* Add Barco Streaming Video Card (SVC) and Sample Compress Network (SCN) board
|
||
Patch by Marc Leeman, 04 Mar 2005
|
||
|
||
* OMAP242x H4 board update
|
||
- fix for ES2 differences.
|
||
- switch to using the cfi_flash driver.
|
||
- fix SRAM build address.
|
||
- fix for GP device operation.
|
||
- unlock SRAM for GP devices.
|
||
- display more device information.
|
||
- fix potential deadlock in omap24xx_i2c driver.
|
||
- fix DLL load values to match dpllout*1 operation.
|
||
- fix 2nd chip select init for combo DDR device.
|
||
- add support for CFI Intel 28F256L18 on H4 board.
|
||
Patch by Richard Woodruff, 03 Mar 2005
|
||
|
||
* Fix formating in include/asm-arm/arch-at91rm9200/AT91RM9200.h
|
||
Patch by Steven Scholz, 02 Mar 2005
|
||
|
||
* Fix typo in eth.c
|
||
Patch by Ara Avanesyan, 24 Feb 2005
|
||
|
||
* Remove unneeded #include <malloc.h>
|
||
Patch by Ladislav Michl, 22 Feb 2005
|
||
|
||
* Add cramfs support for m68k
|
||
Patch by Zachary Landau, 21 Feb 2005
|
||
|
||
* Update ep8260: Fix flash timeouts; improve clock resolution for faster UARTs
|
||
Patch by Jeff Angielski, 21 Feb 2005
|
||
|
||
* Fix au1x00_serial baud rate calculation:
|
||
remove hardcoded cpu clock divisor and use register instead;
|
||
round up instead of truncate
|
||
Patch by Andrew Dyer, 15 Feb 2005
|
||
|
||
* Add Xilinx Spartan3 family FPGA support
|
||
Patch by Kurt Stremerch, 14 Feb 2005
|
||
|
||
* Fix drivers/cfi_flash.c: use info->reset_cmd instead of FLASH_CMD_RESET
|
||
Patch by Zachary Landau, 11 Feb 2005
|
||
|
||
* Fix VOH405 Support
|
||
Patch by Matthias Fuchs, 25 Sep 2005
|
||
|
||
* Added support for PCI bridge on MPC8272ADS
|
||
Patch by Vitaly Bordug, Feb 09 2005
|
||
|
||
* Update multicore CM9XX support for Integrator AP to allow booting from flash
|
||
Patch by Jean-Paul Saman, 8 Feb 2005
|
||
|
||
* Fix strswab() to reliably find end of string
|
||
Patch by Andrew Dyer, 08 Feb 2005
|
||
|
||
* Fix typos in include/ppc440.h
|
||
Patch by Andrew E Mileski, 04 Feb 2005
|
||
|
||
* Add Vibren (was Accelent) PXA255 IDP Support
|
||
Patch by Cliff Brake, 04 Feb 2005
|
||
|
||
* Fix tools/bmp_logo.c using incorrect offset to pixel data
|
||
Patch by Andrew Dyer, 31 Jan 2005
|
||
|
||
* Add ARM946E cpu and core module targets; remap memory to 0x00000000
|
||
Patch by Peter Pearse, 2 Feb 2005
|
||
|
||
* Fix error handling in tools/env/fw_env.c
|
||
Patch by Ara Avanesyan, 01 Feb 2005
|
||
|
||
* Fix MGT5100 PSC baudrate calculation
|
||
Patch by Sebastian Schau, 27 Jan 2005
|
||
|
||
* OMAP242x fix for GP device booting
|
||
- Add SRAM unlock for GP devices.
|
||
- Change DDR DLL unlock value to allow DPLLout*1 operation.
|
||
Patches by Richard Woodruff, 21 Jan 2005:
|
||
|
||
* Add support for AMD's Pb1x00 eval board;
|
||
add MII routines to the au1x00 ethernet driver;
|
||
add USB ohci driver (work in progress)
|
||
Patch by Thomas Sailer, 20 Jan 2005
|
||
|
||
* Update omap5912osk board
|
||
Use drivers/cfi_flash.c instead of private flash driver;
|
||
Remove hardcoded personalized settings from omap5912osk.h;
|
||
Fix spacing with (RO) marks in 'flinfo' output.
|
||
Patch by Michael Bendzick, 14 Jan 2005
|
||
|
||
* Fix warnings for PCI code on ixp
|
||
Patch by Joe <lgxue@yahoo.com>, 13 Jan 2005
|
||
|
||
* virtex2 fix for bogus download error messages
|
||
The virtex2 FPGA download code watches for init going active during
|
||
a download of config data as an error condition. init also goes
|
||
active after a configuration is finished in concert with the done
|
||
signal. So far, the code does not check for done active until all
|
||
of the configuration data is sent. If configuration data has a few
|
||
extra pad bytes at the end, this would cause an error message even
|
||
though the download had suceeded.
|
||
NOTE: virtex2 slave serial and spartan2 versions may still have the
|
||
same problem.
|
||
Patch by Andrew Dyer, 12 Jan 2005
|
||
|
||
* Optimize flash_make_cmd in drivers/cfi_flash.c for little endian
|
||
Fix "WARNING: flash_make_cmd: unsuppported LittleEndian mode"
|
||
message when probing for nonexistent flash in little endian mode.
|
||
As a side effect more efficient and smaller code is generated,
|
||
which is always a Good Thing (TM).
|
||
Patch by Ladislav Michl, 24 Sep 2005
|
||
|
||
* Update for TFTP using a fixed UDP port
|
||
Use the approved environment variable names. Added "tftpdstp" to
|
||
allow ports other than 69 per Tolunay Orkun's recommendation.
|
||
Patch by Jerry Van Baren, 12 Jan 2005
|
||
|
||
* Allow to force TFTP to use a fixed UDP port
|
||
(Add a configuration option CONFIG_TFTP_PORT and optional env
|
||
variable tftpport)
|
||
Patch by Jerry Van Baren, 10 Jan 2005
|
||
|
||
* Fix ethernet timeouts on dbau1550 and other au1x00 systems
|
||
Patch by Leif Lindholm, 29 Dec 2004
|
||
|
||
* Cleanup: fix broken builds
|
||
|
||
* Fix PHY address argument passing with mii info command
|
||
Patch by Andrew Dyer, 28 Dec 2004
|
||
|
||
* Cleanup (PPC4xx is AMCC now)
|
||
|
||
* esd CPCI2DP board added
|
||
Patch by Matthias Fuchs, 22 Sep 2005
|
||
|
||
* esd PMC405 board updated
|
||
Patch by Matthias Fuchs, 22 Sep 2005
|
||
|
||
* Add SM501 support to HH405 board.
|
||
Add support for gzip compressed bmp's (CONFIG_VIDEO_BMP_GZIP).
|
||
Add support for eeprom write-enable (CFG_EEPROM_WREN).
|
||
Patch by Stefan Roese, 22 Sep 2005
|
||
|
||
* Fix autonegotiation in tsec ethernet driver
|
||
Patch by Stefan Roese, 21 Sep 2005
|
||
|
||
* Fix bug in auto_update (trab board)
|
||
Patch by Martin Krause, 16 Sep 2005
|
||
|
||
* Fix computation of framebuffer palette for 8bpp LCD bitmaps
|
||
Patch by Francesco Mandracci, 16 Sep 2005
|
||
|
||
* Update configuration for INKA4x0 board
|
||
|
||
* Update configuration for PM854 board
|
||
Based on patch by R. Loeffl, 20 Jul 2005
|
||
|
||
* Add PCI support to TQM8540 and TQM8560 boards
|
||
Patch by Stefan Roese, 15 Sep 2005
|
||
|
||
* Update AMCC Yosemite to get a consistent setup for all AMCC eval
|
||
boards (baudrate, environment...). Flash driver fixed.
|
||
Patch by Stefan Roese, 15 Sep 2005
|
||
|
||
* Fix problem in 440GP ethernet driver (ebony). Add support for 2nd
|
||
ethernet port on ebony.
|
||
Patch by Stefan Roese, 7 Sep 2005
|
||
|
||
* Added support for mtddevnum and mtddevname variables (mtdparts command)
|
||
|
||
* Change default console baud rate for stxxtc board
|
||
|
||
* Add I2C support to TQM8540 and TQM8560 boards (EEPROM, RTC, LM75-DTT).
|
||
Patch by Stefan Roese, 31 Aug 2005
|
||
|
||
* Fix default command set (don't include CFG_CMD_DISPLAY command)
|
||
Patch by Pantelis Antoniou, 02 Sep 2005
|
||
|
||
* Cleanup
|
||
|
||
* Enable SM712 driver support for HMI1001 board.
|
||
|
||
* Fix problems with ld version 2.16 (dot outside sections problem)
|
||
Pointed out by Gerhard Jaeger, 31 Aug 2005;
|
||
cf. http://sourceware.org/ml/binutils/2005-08/msg00412.html
|
||
|
||
* Prepare U-Boot for gcc-4.x: fix global data pointer initialization
|
||
|
||
* Adjust CS3 timings on HMI1001 board for dot matrix display under Linux
|
||
|
||
* Add keyboard and dot matrix display support for HMI1001 board.
|
||
|
||
* Prepare U-Boot for gcc-4.x
|
||
|
||
* Fixed Bamboo port to enable running without DDR-DIMM
|
||
(Bamboo has also 64MB onboard DDR)
|
||
Patch by Stefan Roese, 24 Aug 2005
|
||
|
||
* Merged 405gp_enet.c and 440gx_enet.c to generic 4xx_enet.c
|
||
now handling all 4xx cpu's
|
||
Patch by Stefan Roese, 16 Aug 2005
|
||
|
||
* Fix make dependencies for at91rm9200 and ks8695 cpus
|
||
Patch by Steven Scholz, 23 Aug 2005
|
||
|
||
* Add JFFS2 support for TQM5200 board
|
||
|
||
* Add esd cpci5200 and pf5200 boards
|
||
Patch by Reinhard Arlt, 22 Aug 2005
|
||
|
||
* Fix sysclock for TQM8540 and TQM8560 boards
|
||
Patch by Martin Krause, 25 Jul 2005
|
||
|
||
* Initialize serial# and ethaddr from manufacturer data in EEPROM on CMC-PU2
|
||
Patch by Martin Krause, 08 Jun 2005
|
||
|
||
* Add new board specific commands for TQM5200/STK52XX
|
||
- Sound commands (beep, wav, sound)
|
||
- Test commands (led, can, backlight, rs232)
|
||
Patch by Martin Krause, 02 May 2005
|
||
|
||
* Change main clock on CMC-PU2 board from 207 MHz to 179 MHz
|
||
because of a bug in the AT91RM9200 CPU PLL
|
||
Patch by Martin Krause, 22 Apr 2005
|
||
|
||
* Add automatic HW detection for another CMC_PU2 variant
|
||
Patch by Martin Krause, 20 Apr 2005
|
||
|
||
* Remove CONFIG_AT91RM9200DK in CMC-PU2 configuration
|
||
Patch by Martin Krause, 19 Apr 2005
|
||
|
||
* Fix initialization problem on TQM5200 without SM501
|
||
Patch by Martin Krause, 08 Apr 2005
|
||
|
||
* Add RTC support for STK52XX.200
|
||
Patch by Martin Krause, 07 Apr 2005
|
||
|
||
* Add support for IFM o2dnt board
|
||
|
||
* Enable PCI on hmi1001 board
|
||
|
||
* Fix return values of the jffs2 commands ls/fsload/fsinfo,
|
||
so we can use them to, e.g., check the existence of a file with
|
||
"if ls foo; then this; else that; fi" in the hush shell
|
||
Patch by Andreas Engel, 16 August 2005
|
||
|
||
* Coding style cleanup
|
||
|
||
* Add support for Silicon Turnkey eXpress XTc (mpc87x/88x) board.
|
||
Patch by Dan Malek and Pantelis Antoniou, 15 Aug 2005
|
||
|
||
* Check return value of malloc in 440gx_enet.c
|
||
Patch by Travis B. Sawyer, 18 Jul 2005
|
||
|
||
* Add Sandburst Metrobox and Sandburst Karef board support packages.
|
||
Second serial port on 440GX now defined as a system device.
|
||
Add 'Short Etch' code for Cicada PHY within 440gx_enet.c
|
||
Patch by Travis B. Sawyer, 12 Jul 2005
|
||
|
||
======================================================================
|
||
Changes for U-Boot 1.1.3:
|
||
======================================================================
|
||
|
||
* Minor code cleanup
|
||
|
||
* Add forgotten new fils from latest VoiceBlue update
|
||
|
||
* Make bootretry feature work with hush shell.
|
||
Caveat: this currently *requires* CONFIG_RESET_TO_RETRY to be set, too.
|
||
Patch by Andreas Engel, 19 Jul 2005
|
||
|
||
* Update Hymod Board Database PHP code in "tools" directory
|
||
Patch by Murray Jensen, 01 Jul 2005
|
||
|
||
* Make "tr" command use POSIX compliant; export HOSTOS make variable
|
||
Patch by Murray Jensen, 30 Jun 2005
|
||
|
||
* Fix Murray Jensen's mail address.
|
||
Patch by Murray Jensen, 30 Jun 2005
|
||
|
||
* Preserve PHY_BMCR during a soft reset.
|
||
Patch by Carl Riechers, 24 Jun 2005
|
||
|
||
* VoiceBlue update: eeprom tool can also store firmware version now.
|
||
eeprom.bin is runable by jumping at load address.
|
||
Patch by Ladislav Michl, 23 May 2005
|
||
|
||
* Move the AT91RM9200DK to the ARM Systems list.
|
||
Patch by Anders Larsen, 26 Apr 2005
|
||
|
||
* Eliminate calls of ARM libgcc.a helper functions _divsi3 and _modsi3
|
||
Patch by Anders Larsen, 26 Apr 2005
|
||
|
||
* measure_gclk() is needed when DEBUG is enabled
|
||
Patch by Bryan O'Donoghue, 25 Apr 2005
|
||
|
||
* Add UPD-Checksum code, fix problem in net.c (return instead of break)
|
||
Patch by Reinhard Arlt, 12 Aug 2005
|
||
|
||
* esd PCI405 board updated
|
||
Patch by Matthias Fuchs, 28 Jul 2005
|
||
|
||
* esd WUH405 and DU405 board updated
|
||
Patch by Matthias Fuchs, 27 Jul 2005
|
||
|
||
* Fix problem in cmd_nand.c (only when defined CFG_NAND_SKIP_BAD_DOT_I)
|
||
Patch by Matthias Fuchs, 4 May 2005
|
||
|
||
* Update AMCC Yosemite to get a consistent setup for all AMCC eval
|
||
boards (baudrate, environment...). Flash driver fixed.
|
||
Patch by Stefan Roese, 11 Aug 2005
|
||
|
||
* Changed AMCC Bubinga (405EP) configuration to support 2nd eth port
|
||
Patch by Stefan Roese, 11 Aug 2005
|
||
|
||
* Add NAND FLASH support for AMCC Bamboo 440EP eval board
|
||
Patch by Stefan Roese, 11 Aug 2005
|
||
|
||
* Add configuration for IFM AEV FIFO board.
|
||
Minor coding style cleanup.
|
||
|
||
* Add configuration for IFM SPI eval board
|
||
|
||
* Fix CompactFlash problem on HMI1001 board
|
||
|
||
* Make new "mtdparts" code build with older compilers
|
||
Patch by Andrea Scian, 09 Aug 2005
|
||
|
||
* Changed CONFIG_440_GX, CONFIG_440_EP and CONFIG_440_GR options to
|
||
CONFIG_44GX, CONFIG_440EP and CONFIG_440GR for a consistent design
|
||
with the 405 defines and the linux kernel defines.
|
||
Patch by Stefan Roese, 08 Aug 2005
|
||
|
||
* Fix compiler warnings with older GCC versions
|
||
|
||
* Add common (with Linux) MTD partition scheme and "mtdparts" command
|
||
|
||
Old, obsolete and duplicated code was cleaned up and replace by the
|
||
new partitioning method. There are two possible approaches now:
|
||
|
||
The first one is to define a single, static partition:
|
||
|
||
#undef CONFIG_JFFS2_CMDLINE
|
||
#define CONFIG_JFFS2_DEV "nor0"
|
||
#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF /* use whole device */
|
||
#define CONFIG_JFFS2_PART_SIZE 0x00100000 /* use 1MB */
|
||
#define CONFIG_JFFS2_PART_OFFSET 0x00000000
|
||
|
||
The second method uses the mtdparts command line option and dynamic
|
||
partitioning:
|
||
|
||
/* mtdparts command line support */
|
||
#define CONFIG_JFFS2_CMDLINE
|
||
#define MTDIDS_DEFAULT "nor1=zuma-1,nor2=zuma-2"
|
||
#define MTDPARTS_DEFAULT "mtdparts=zuma-1:-(jffs2),zuma-2:-(user)"
|
||
|
||
Command line of course produces bigger images, and may be inappropriate
|
||
for some targets, so by default it's off.
|
||
|
||
* Fix build problems for PM856 Board
|
||
|
||
* Fix sign extension bug in 'fpga loadb' command;
|
||
make 'fpga loadb' always print the file header info
|
||
Patch by Andrew Dyer, 11 Jan 2005
|
||
|
||
* Fix errors that occur when accessing SystemACE CF
|
||
Patch by Jeff Angielski, 09 Jan 2005
|
||
|
||
* Document switching between U-Boot and PlanetCore on RPXlite
|
||
by Sam Song, 24 Dec 2004
|
||
|
||
* Fix PowerQUICC II mask detection.
|
||
Patch by Eugene Surovegin, 20 Dec 2004
|
||
|
||
* Add support for Altera NIOS DK1C20 board
|
||
Patch by Shlomo Kut, 13 Dec 2004
|
||
|
||
* Add support for ep8248 board
|
||
Patch by Yuli Barcohen, 12 Dec 2004
|
||
|
||
Minor code cleanup.
|
||
|
||
* Fix baudrate setting for KGDB on MPC8260
|
||
Patch by HoJin, 11 Dec 2004
|
||
|
||
* Fix 'mii help' text formatting
|
||
Patch by Cory Tusar, 10 Dec 2004
|
||
|
||
* Fix return code of NFS command
|
||
Patch by Hiroshi Ito, 11 Dec 2004
|
||
|
||
* Fix typo
|
||
|
||
* Fix compiler warnings in cpu/ppc4xx/usbdev.c
|
||
Patch by Steven Blakeslee, 04 Aug 2005
|
||
|
||
* Add support for AMCC Bamboo PPC440EP eval board
|
||
Patch by Stefan Roese, 04 Aug 2005
|
||
|
||
* Patch by Jon Loeliger
|
||
Fix style issues primarily in 85xx and 83xx boards.
|
||
- C++ comments
|
||
- Trailing white space
|
||
- Indentation not by TAB
|
||
- Excessive amount of empty lines
|
||
- Trailing empty lines
|
||
|
||
* Patch by Ron Alder, 11 Jul 2005
|
||
Add Xianghua Xiao and Lunsheng Wang's support for the
|
||
GDA MPC8540 EVAL board.
|
||
|
||
* Patch by Eran Liberty
|
||
Add support for the Freescale MPC8349ADS board.
|
||
|
||
* Patch by Jon Loeliger, 25 Jul 2005
|
||
Move the TSEC driver out of cpu/mpc85xx as it will be shared
|
||
by the upcoming mpc83xx family as well.
|
||
|
||
* Patch by Jon Loeliger, 05 May 2005
|
||
Implemented support for MPC8548CDS board.
|
||
Added DDR II support based on SPD values for MPC85xx boards.
|
||
This roll-up patch also includes bugfies for the previously
|
||
published patches:
|
||
DDRII CPO, pre eTSEC, 8548 LBIU, Andy's TSEC, eTSEC 3&4 I/O
|
||
|
||
* Patch by Jon Loeliger, 10 Feb 2005
|
||
Add config option CONFIG_HAS_FEC calling out 8540 FEC features.
|
||
|
||
* Patch by Jon Loeliger, Kumar Gala, 08 Feb 2005
|
||
For MPC85xxCDS:
|
||
Adds Relaxed Timing TRLX bit to FLASH ORx regs to allow
|
||
for faster flash parts.
|
||
Add documentation for BR/OR for FLASH.
|
||
|
||
* Patch by Jon Loeliger 08 Feb 2005
|
||
Determine L2 Cache size dynamically on 85XX boards.
|
||
|
||
* Patch by Jon Loeliger, Kumar Gala 08 Feb 2005
|
||
- Convert the CPM2 based functionality to use new CONFIG_CPM2
|
||
option rather than a myriad of CONFIG_MPC8560-like variants.
|
||
Applies to MPC85xx and MPC8260 boards, includes stxgp3 and sbc8560.
|
||
Eliminates the CONFIG_MPC8560 option entirely. Distributes the
|
||
new CONFIG_CPM2 option to each 8260 board.
|
||
|
||
* Add support for MicroSys PM856 board
|
||
Patch by Josef Wagner, 03 Aug 2005
|
||
|
||
* Minor fixes to PM854 board
|
||
Patch by Josef Wagner, 03 Aug 2005
|
||
|
||
* Adjust configuration of XENIAX board
|
||
(chip select and GPIO required for USB operation)
|
||
|
||
* Fix typos in cpu/85xx/start.S which caused DataTLB exception to be
|
||
routed to the Watchdog handler
|
||
Patch by Eugene Surovegin, 18 Jun 2005
|
||
|
||
* (re)enabled scsi commands do_scsi() and do_scsiboot()
|
||
Patch by Denis Peter, 06 Dec 2004
|
||
|
||
* Fix endianess problem in TFTP / NFS default filenames
|
||
Patch by Hiroshi Ito, 06 Dec 2004
|
||
|
||
* Ignore broadcast status bit in received frames in 8260 FCC ethernet
|
||
loopback test code
|
||
Patch by Murray Jensen, 18 Jul 2005
|
||
|
||
* Fix typo in mkconfig script (used == instead of =)
|
||
Patch by Murray Jensen, 18 Jul 2005
|
||
|
||
* Cleanup build problems on 64 bit build hosts
|
||
|
||
* Update MAINTAINERS file
|
||
|
||
* Patch by Stefan Roese, 01 Aug 2005:
|
||
- Major cleanup for AMCC eval boards Walnut, Bubinga, Ebony, Ocotea
|
||
(former IBM eval board). Please see "doc/README.AMCC-eval-boards-cleanup"
|
||
for details.
|
||
- Sycamore (PPC405GPr) eval board added (Walnut port is extended
|
||
to run on both 405GP and 405GPr eval boards).
|
||
|
||
* Patch by Steven Blakeslee, 27 Jul 2005:
|
||
- Add support for AMCC PPC440EP/GR.
|
||
- Add support for AMCC Yosemite PPC440EP eval board.
|
||
- Add support for AMCC Yellowstone PPC440GR eval board.
|
||
|
||
* Minor fixes for PPChameleon Board:
|
||
- fix alignment of NAND size
|
||
- make code do what the comment says
|
||
|
||
* Implement h/w sector protection status synchronization at boot.
|
||
The code is provided for, and was tested on, the Yukon/Alaska
|
||
and PM520 boards only.
|
||
|
||
A bug in flash_real_protect() for the Yukon board was fixed by
|
||
adding a function that tells if two banks are on one flash chip.
|
||
|
||
* Fix sysmon POST problem: check I2C error codes
|
||
This fixes a problem of displaying bogus voltages when the voltages
|
||
are so low that the I2C devices start failing while the rest of the
|
||
system keeps running.
|
||
|
||
* Patch by Cedric Vincent, 6 Jul 2005:
|
||
Fix CFG_CMD_SETGETDCR handling in "common/cmd_dcr.c"
|
||
|
||
* Patch by Jon Loeliger, 20 Jul 2005:
|
||
Add missing PCI IO port definitions.
|
||
|
||
* Add CompactFlash support for HMI1001 board.
|
||
|
||
* Adjust printed board ID for LWMON board.
|
||
|
||
* Fix low-level OHCI transfers for ARM920t and MPC5xxx
|
||
|
||
* Add new argument format for flash commands to allow for usage like
|
||
"erase $(addr) +$(filesize)", i. e. a size argument can be used and
|
||
U-Boot will automaticially find the end of the corresponding sector.
|
||
|
||
* Patch by Stefan Roese, 5 Jul 2005:
|
||
Update uc100 board PHY setup
|
||
|
||
* Patch by Stefan Roese, 1 Jul 2005:
|
||
Fix PHY address for CATcenter board (now correct!)
|
||
|
||
* Patch by Stefan Roese, 30 Jun 2005:
|
||
Fix PHY addresses for PPChameleon and CATcenter boards
|
||
Change MAINTAINER for most esd boards
|
||
|
||
* Patch by Detlev Zundel, 30 Jun 2005:
|
||
Fix LCD logo for lwmon board which got lost in the merge of 8xx and PXA LCD code
|
||
|
||
* Fix baudrate calculation problem on MPC5200 systems
|
||
|
||
* Add EEPROM and RTC support for HMI1001 board
|
||
|
||
* Patch by Detlev Zundel, 20 Jun 2005:
|
||
Fix initialization of low active GPIO pins on inka4x0 board
|
||
|
||
* Enable redundant environment, disable HW flash protection of
|
||
HMI1001 board
|
||
|
||
* Patch by Travis Sawyer, 10 Jun 2005:
|
||
Initialize allocated dev and private hw structures
|
||
after their respective allocation in 440gx_enet.c
|
||
|
||
* Patch by Steven Scholz, 10 Jun 2005:
|
||
Fix byteorder problems with second argument of "bootm" with
|
||
standalone images;
|
||
|
||
* Add support for HMI1001 board
|
||
|
||
* Disable "date" and "sntp" commands on TQM866M
|
||
|
||
* Fix watchdog reset problems on LWMON board
|
||
|
||
* Patch by Juergen Selent, 17 May 2005:
|
||
Add support for Funkwerk VoVPN gateway module.
|
||
|
||
* Cleanup debug code for MPC8220 FEC driver
|
||
|
||
* Extend burst mode RAM test program to take a loop count
|
||
(0 = infinite)
|
||
|
||
* Use CONFIG_DRIVER_KS8695ETH to enable KS8695 ethernet driver on
|
||
those boards that use it.
|
||
|
||
* Patches by Greg Ungerer, 19 May 2005:
|
||
- add support for the KS8695P (ARM 922 based) CPU
|
||
- add support for the OpenGear CM4008, CM4116 and CM4148 boards
|
||
|
||
* Patch by Steven Scholz, 19 May 2005:
|
||
Add support for CONFIG_SERIAL_TAG on ARM boards
|
||
|
||
* Add PCI support for Sorcery board.
|
||
Code cleanup (especially Sorcery / Alaska / Yukon serial driver).
|
||
|
||
* Fix compile problems caused by new burst mode SDRAM test;
|
||
make port pins to trigger logic analyzer configurable
|
||
|
||
* Fix timer handling on MPC85xx systems
|
||
|
||
* Fix debug code in omap5912osk flash driver
|
||
|
||
* Add support for MPC8247 based "IDS8247" board.
|
||
|
||
* Add support for 2 x TSEC interfaces on the TQM8540 board.
|
||
|
||
* On LWMON we must use the watchdog to reset the board as the CPU
|
||
genereated HRESET pulse is too short to reset the external
|
||
circuitry.
|
||
|
||
* Add test tool to exercise SDRAM accesses in burst mode
|
||
(as standalone program, MPC8xx/PowerPC only)
|
||
|
||
* Increase CFG_MONITOR_LEN for Rattler board to match actual code
|
||
size.
|
||
|
||
* Major upate of JFFS2 code; now in sync with snapshot of MTD CVS of
|
||
March 13, 2005); new configuration option CONFIG_JFFS2_LZO_LZARI
|
||
added to support LZO and LZARI compression modes (undefined by
|
||
default).
|
||
|
||
* Fix problem with symbolic links in JFFS2 code.
|
||
|
||
* Use linker ASSERT statement to prevent undetected overlapping of
|
||
sections on PPChameleon board; other boards might use this, too.
|
||
|
||
* Patch by Stefan Roese, 03 May 2005:
|
||
Update for P3G4
|
||
Fix problems in cmd_universe.c
|
||
|
||
* Patch by Matthias Fuchs, 03 May 2005:
|
||
Added missing variable declaration in cmd_nand.c
|
||
Modified CFG_PCI_PTM1MS in configs/PLU405.h to map 128MB ram
|
||
|
||
* Fix INKA4x0: use CS1 as gpio_wkup_6 output
|
||
|
||
* Fix bug in the SDRAM initialization code for canmb, IceCube and
|
||
PM520 boards.
|
||
Fix PHY address for canmb board.
|
||
|
||
* Cleanup serial console baudrate calculation on AT91RM9200;
|
||
get rid of obsolete CFG_AT91C_BRGR_DIVISOR definition
|
||
|
||
* Patch by Matthias Fuchs, 18 Apr 2005:
|
||
Make PCI target address spaces on PMC405 and CPCI405 boards
|
||
configurable via environment variables
|
||
|
||
* Auto-size RAM on canmb board.
|
||
|
||
* Add support for canmb board
|
||
|
||
* Patch by Stefan Roese, 13 Apr 2005:
|
||
Update for esd apc405
|
||
|
||
* Fixes for TQM8560 board:
|
||
- fix clock rates
|
||
- remove debug messages
|
||
- fix flash sector protection
|
||
|
||
* Patch by Steven Scholz, 07 Apr 2005:
|
||
Add i2c_reg_write() and i2c_reg_write() for at91rm9200 I2C
|
||
|
||
* Patches by Steven Scholz, 07 Apr 2005:
|
||
Fix compiler warning in altera.c
|
||
Fix warning in cpu/arm920t/at91rm9200/i2c.c
|
||
|
||
* Patch by Ladislav Michl, 06 Apr 2005:
|
||
Fix voiceblue configuration.
|
||
|
||
* Patch by Stefan Roese, 06 Apr 2005:
|
||
Updates for OCOTEA board:
|
||
- Changed U-Boot size from 512kByte to 256kByte
|
||
- Fixed flash driver to support boot from soldered user flash
|
||
- Added README for switch from PIBS firmware to U-Boot
|
||
|
||
* Patch by Travis Sawyer, 05 Apr 2005:
|
||
- Change timer frequency for ppc 440 from 10 ms to 1 ms.
|
||
Problem found by Andrew Wozniak.
|
||
|
||
* Patch by Steven Scholz, 06 Apr 2005:
|
||
- creating SoC subdir for Atmel AT91RM9200 cpu/arm920t/at91rm9200
|
||
- moving code out of cpu/at91rm9200 into cpu/arm920t/at91rm9200
|
||
|
||
* Patches by Robert Whaley, 29 Nov 2004:
|
||
- update the pxa-regs.h file for PXA27x chips
|
||
- add PXA27x based ADSVIX board
|
||
- add support for MMC on PXA27x processors
|
||
|
||
* Patch by Andrew E. Mileski, 28 Nov 2004:
|
||
Fix PPC4xx SPD SDRAM detection bug
|
||
|
||
* Patch by Hiroshi Ito, 26 Nov 2004:
|
||
Fix logic of "test -z" and "test -n" commands
|
||
|
||
* Patch by Ladislav Michl, 05 Apr 2005:
|
||
Add support for VoiceBlue board.
|
||
|
||
* Patch by Ladislav Michl, 05 Apr 2005:
|
||
Fix netboot_common() prototypes.
|
||
|
||
* Patch by Steven Scholz, 05 Apr 2005:
|
||
Use i.MX watchdog timer for reset_cpu()
|
||
|
||
* Patch by Steven Scholz, 05 Apr 2005:
|
||
Move reset_cpu() out of cpu/arm920t/start.S into the SoC specific
|
||
subdirectories cpu/arm920t/imx/ and cpu/arm920t/s3c24x0/
|
||
(now in interupts.c)
|
||
|
||
* Add support for MPC8220 based "sorcery" board.
|
||
|
||
* Add support for TQM8560 board.
|
||
|
||
* Add FEC support for TQM8540 board.
|
||
Interfaces are named as follows: "ENET1" - TSEC2, "ENET2" - FEC
|
||
|
||
* Patch by Martin Krause, 04 Apr 2005:
|
||
Update default configuration for CMC_PU2 board.
|
||
|
||
* Patch by Steven Scholz, 04 Apr 2005:
|
||
- remove all references to CONFIG_INIT_CRITICAL for ARM based boards
|
||
- introduce two new configuration options instead:
|
||
CONFIG_SKIP_LOWLEVEL_INIT and CONFIG_SKIP_RELOCATE_UBOOT
|
||
|
||
* Patch by Steven Scholz, 04 Apr 2005:
|
||
Make sure that MDIO clock does not exceed 2.5 MHz on AT91
|
||
|
||
* Fix timer code for ARM systems: make sure that udelay() does not
|
||
reset timers so it's save to use udelay() in timeout code.
|
||
|
||
* Patch by Mathias K<>ster, 23 Nov 2004:
|
||
add udelay support for the mcf5282 cpu
|
||
|
||
* Patch by Tolunay Orkun, 16 November 2004:
|
||
fix incorrect onboard Xilinx CPLD base address
|
||
|
||
* Patch by Jerry Van Baren, 08 Nov 2004:
|
||
- Add low-boot option for MPC8260ADS board (if lowboot is selected,
|
||
the jumper for the HRCW source should select flash. If lowboot is
|
||
not selected, the jumper for the HRCW source should select the
|
||
BCSR.
|
||
- change default load base address to 0x00400000
|
||
|
||
* Patch by Yuli Barcohen, 08 Nov 2004:
|
||
Add support for Analogue & Micro Rattler boards.
|
||
Tested on Rattler8248.
|
||
|
||
* Patch by Andre Renaud, 08 Nov 2004:
|
||
Fix watchdog support in common/lcd.c
|
||
|
||
* Patch by Marc Leeman, 05 Nov 2003:
|
||
Enable all 4 PCMBRW buffers for the MPC8245 processor since the CPU
|
||
bug only affects the XPC8245 processors
|
||
|
||
* Patches by Josef Wagner, 29 Oct 2004:
|
||
- Add support for MicroSys CPU87 board
|
||
- Add support for MicroSys PM854 board
|
||
|
||
* Patch by Jian Zhang, 02 Nov 2004:
|
||
Add 16-bit NAND support
|
||
|
||
* Patch by Scott McNutt, 01 Nov 2004:
|
||
Add missing NIOS/NIOS2 support for "iminfo" command
|
||
|
||
* Patch by Detlev Zundel, 29 Oct 2004:
|
||
Add missing NIOS/NIOS2 support for "mkimage" tool.
|
||
|
||
* Patch by David Adair, 27 Oct 2004:
|
||
Add missing 440GX SDRAM Controller reset
|
||
|
||
* Patch by Steven Scholz, 25 Oct 2004:
|
||
Declare reset_cpu() in include/common.h instead locally
|
||
|
||
* Patch by Yusdi Santoso, 22 Oct 2004:
|
||
- Add support for HIDDEN_DRAGON board
|
||
- fix endianess problem in driver/rtl1839.c
|
||
|
||
* Patch by Allen Curtis, 21 Oct 2004:
|
||
support multiple serial ports
|
||
|
||
* Patch by Richard Klingler, 03 Apr 2005:
|
||
Add call to eth_halt() in net/net.c when called functions fail
|
||
after eth_init() has been called.
|
||
|
||
* Patch by Sam Song, 3 April 2005:
|
||
- Update README.Netconsole
|
||
- Update README
|
||
|
||
* Prepare for SoC rework of ARM code:
|
||
- rename CONFIG_BOOTBINFUNC into CONFIG_INIT_CRITICAL
|
||
- rename memsetup into lowlevel_init (function name and source files)
|
||
Patch by Steven Scholz, 03 Apr 2005:
|
||
- create SoC specific directories include/asm-arm/arch-imx and
|
||
include/asm-arm/arch-s3c24x0
|
||
|
||
* Fix problems with SNTP support;
|
||
enable SNTP support in some boards.
|
||
|
||
* Patches by Martin Krause, 01 Apr 2005:
|
||
- Fix flash erase timeout on CMC_PU2
|
||
- Add automatic HW detection for CMC_PU2 and CMC_BASIC
|
||
|
||
* Patch by Steven Scholz, 13 March 2005:
|
||
fix cache enabling for AT91RM9200
|
||
|
||
* Patch by Masami Komiya, 30 Mar 2005:
|
||
add SNTP support and expand time server and time offset fields of
|
||
DHCP support. See doc/README.SNTP
|
||
|
||
* Patch by Steven Scholz, 13 Dec 2004:
|
||
Fix bug in at91rm920 ethernet driver
|
||
|
||
* Patch by Steven Scholz, 13 Dec 2004:
|
||
Remove duplicated code by merging memsetup.S files for
|
||
at91rm9200 boards into one cpu/at91rm9200/lowlevel.S
|
||
|
||
* Patch by Detlev Zundel, 31 Mar 2005:
|
||
Cleanup duplicate definition of overwrite_console()
|
||
|
||
* Update TQM5200 configuration;
|
||
prepare for Rev. 200 starter kit boards
|
||
|
||
* Patch by Scott McNutt, 21 Oct 2004:
|
||
Add support for Nios-II EPCS Controller core.
|
||
|
||
* Patch by Scott McNutt, 20 Oct 2004:
|
||
Nios-II cleanups:
|
||
- Add sysid command (Nios-II only).
|
||
- Locate default exception trampoline at proper offset.
|
||
- Implement I/O routines (readb, writeb, etc)
|
||
- Implement do_bootm_linux
|
||
|
||
* Patches by Martin Krause, 22 Mar 2005:
|
||
- use TQM5200_auto as MAKEALL target for TQM5200 systems
|
||
- add support for SM501 graphics controller
|
||
- add support for graphic console on TQM5200
|
||
- add support for TQM5200 Rev 200
|
||
- cleanup, fix typo in include/configs/TQM5200.h
|
||
|
||
* Patch by Manfred Baral, 17 Mar 2005:
|
||
Fix typo
|
||
|
||
* Fix RTC configuration for PPChameleon board
|
||
|
||
* Cleanup, fix typo in include/configs/TQM5200.h
|
||
|
||
* Patch by Stefan Roese, 16 Mar 2005:
|
||
Update for esd auto_update and hh405 board
|
||
|
||
* Adapt for U-Boot image size (new features enabled) on TQM5200
|
||
|
||
* Update code for TQM8540 board (and 85xx in general):
|
||
- Change the name of the Ethernet driver: MOTO ENET -> ENET
|
||
- Reformat boot messages
|
||
- Enable redundant environment
|
||
- Replace the -O2 optimization flag with -mno-string
|
||
|
||
* Patch by David Brownell, 10 Mar 2005:
|
||
Restore copyright statements in OHCI drivers.
|
||
|
||
* Add support for TQM8540 board
|
||
|
||
* Patch by Detlev Zundel, 14 Mar 2005:
|
||
NC650: changed NAND flash addressing to using UPMB
|
||
|
||
* Patch by Stefan Roese, 14 Mar 2005:
|
||
Update for esd voh405 fpga image
|
||
|
||
* INKA4x0: Allow initialization of LCD backlight dimming from
|
||
"brightness" environment variable.
|
||
|
||
* Add port initialization for digital I/O on INKA4x0
|
||
|
||
* Patch by Stefan Roese, 01 Mar 2005:
|
||
Update for esd boards dp405 and hub405
|
||
|
||
* Fix get_partition_info() parameter error in all other calls
|
||
(common/cmd_ide.c, common/cmd_reiser.c, common/cmd_scsi.c).
|
||
|
||
* Enable USB and IDE support for INKA4x0 board
|
||
|
||
* Patch by Andrew Dyer, 28 Feb 2005:
|
||
fix ext2load passing an incorrect pointer to get_partition_info()
|
||
resulting in load failure for devices other than 0
|
||
|
||
* Add support for SRAM and 2 x Quad UARTs on INKA4x0 board
|
||
|
||
* Cleanup USB and partition defines
|
||
|
||
* Add support for ext2 filesystems and image timestamps to TQM5200 board
|
||
|
||
* Add reset code for Coral-P on INKA4x0 board
|
||
|
||
* Patch by Martin Krause, 28 Jun 2004:
|
||
Update for TRAB board.
|
||
|
||
* Fix some missing "volatile"s in MPC5xxx FEC driver
|
||
|
||
* Fix cirrus voltage detection (for CPC45)
|
||
|
||
* Fix byteorder problem in usbboot and scsiboot commands.
|
||
|
||
* Patch by Cajus Hahn, 04 Feb 2005:
|
||
- don't insist on leading '/' for filename in ext2load
|
||
- set default partition to useful value (1) in ext2load
|
||
|
||
* Patch by Andrew Dyer, 08 Jan 2005:
|
||
fix wrong return codes in ext2 code
|
||
|
||
* Removed '--no-warn-mismatch' option from Makefile. This option
|
||
makes 'ld' to overlook binary objects compatibility.
|
||
|
||
* Moved $(PLATFORM_LIBS) from the library group (--start-group ...
|
||
--end-group) outside of the group. This will make 'ld' to do
|
||
_multiple_ search in the library group when resolving symbol
|
||
references and do only a _single_ seach in libgcc.a after the group
|
||
search.
|
||
|
||
* Fix stability problems on CPC45 board again.
|
||
|
||
* Make image detection for diskboot / usbboot / scsiboot more robust
|
||
(also check header checksum)
|
||
|
||
* Update CPC45 board configuration.
|
||
|
||
* Add USB and PCI support for INKA4x0 board
|
||
|
||
* Fix IDE stability problems on CPC45 board (needs 2 x EIEIO).
|
||
|
||
* Code cleanup
|
||
|
||
* Patch by Robin Getz, 13 Oct 2004:
|
||
Add standalone application to change SMC91C111 MAC addresses,
|
||
see examples/README.smc91111_eeprom
|
||
|
||
* Patch by Xiaogeng (Shawn) Jin, 12 Oct 2004:
|
||
Fix Flash support for ARM Integrator CP.
|
||
|
||
* Patch by Richard Woodruff, 10 Jan 2005:
|
||
Update support for OMAP2420 (ARM11) and H4 board:
|
||
o clean up and add new types to H4 memory probe code.
|
||
o fix to work with internal boot.
|
||
o added PRCM config III operation.
|
||
o fix marginal flash timings.
|
||
o add revison ATAG usage.
|
||
o enable voltage scaling at power chip.
|
||
o fix compile error for i2c.
|
||
|
||
* Fix network problem (error when receiving multiple ARP packets)
|
||
|
||
* Patch by Daniel Poirot, 12 Oct 2004:
|
||
Add support for Wind River sbc405 board
|
||
|
||
* Patch by Rainer Brestan, 12 Oct 2004:
|
||
Make examples/Makefile more robust
|
||
|
||
* Patch by Sam Song, 11 October 2004:
|
||
- Add RESET/PREBOOT/AUTOBOOT support for RPXlite_DW board
|
||
- Adjust CPU:BUS frequency ratio 1:1 when core frequency
|
||
less than 50MHz
|
||
|
||
* Patch by Sam Song, 10 Oct 2004:
|
||
Fix a parameter error in run_command() in main.c
|
||
|
||
* Patch by Richard Woodruff, 01 Oct 2004:
|
||
add support for the TI OMAP2420 processor and its H4 reference
|
||
board
|
||
|
||
* Patch by Christian Pellegrin, 24 Sep 2004:
|
||
Added support for NE2000 compatible (DP8390, DP83902) NICs.
|
||
|
||
* Patch by Leif Lindholm, 23 Sep 2004:
|
||
add support for the AMD db1550 board
|
||
|
||
* Patch by Travis Sawyer, 15 Sep 2004:
|
||
Add CONFIG_SERIAL_MULTI support for ppc4xx,
|
||
update README.serial_multi
|
||
|
||
* Patches by David Snowdon, 07 Sep 2004:
|
||
- add u-boot.hex target in the top level Makefile
|
||
- add support for the UNSW/NICTA PLEB 2 board (pleb2)
|
||
- use -mtune=xscale and -march=armv5 options for PXA
|
||
|
||
* Patch by Florian Schlote, 08 Sep 2004:
|
||
Add support for SenTec-COBRA5272-board (ColdFire).
|
||
|
||
* Patch by Gleb Natapov, 07 Sep 2004:
|
||
mpc824x: set PCI latency timer to a sane value
|
||
(is 0 after reset).
|
||
|
||
* Patch by Kurt Stremerch, 03 Sep 2004:
|
||
Add bitstream configuration option for fpga command (Xilinx only).
|
||
|
||
* Patch by Kurt Stremerch, 03 Sep 2004:
|
||
Add Xilinx Spartan2E family FPGA support
|
||
|
||
* Patch by Jeff Angielski, 02 Sep 2004:
|
||
Add Added support for H2 revision of the EP8260 board.
|
||
Fixed formatting for some of the EP8260 related source files.
|
||
|
||
* Patch by Jon Loeliger, 02 Sep 2004:
|
||
Reset monitor size back to 256 so environment can be written
|
||
to flash on MPC85xx ADS and CDS releases.
|
||
|
||
* Patch by Paolo Broggini, 02 Sep 2004:
|
||
Make BSS clearing on ARM systems more robust
|
||
|
||
* Patch by Yue Hu and Joe, 01 Sep 2004:
|
||
- add PCI support for ixp425;
|
||
- add EEPRO100 suppor tfor ixdp425 board.
|
||
|
||
* Fix problem with protected sector detection in driver/cfi_flash.c
|
||
|
||
======================================================================
|
||
Changes for U-Boot 1.1.2:
|
||
======================================================================
|
||
|
||
* Code cleanup, mostly for GCC-3.3.x
|
||
|
||
* Cleanup confusing use of CONFIG_ETH*ADDR - ust his only to
|
||
pre-define a MAC address; use CONFIG_HAS_ETH* to enable support for
|
||
additional ethernet addresses.
|
||
|
||
* Cleanup drivers/i82365.c - avoid duplication of code
|
||
|
||
* Fix bogus "cannot span across banks" flash error message
|
||
|
||
* Code cleanup
|
||
|
||
* Add support for CompactFlash for the CPC45 Board.
|
||
|
||
* Fix problems with CMC_PU2 flash driver.
|
||
|
||
* Cleanup:
|
||
- avoid trigraph warning in fs/ext2/ext2fs.c
|
||
- rename UC100 -> uc100
|
||
|
||
* Add support for UC100 board
|
||
|
||
* Patch by Stefan Roese, 16 Dez 2004:
|
||
- ext2fs support added
|
||
- Tundra universe support added
|
||
- ColdFire MCF5249 support added (no preloader needed!)
|
||
- MCF5249 board TASREG added
|
||
- PPC boards added: APC405, CPCI405DT, CPCI750, G2000, HH405,
|
||
VOM405, WUH405
|
||
- some esd boards updated
|
||
- memory commands "mdc" and "mwc" added for cyclic read/write
|
||
(CONFIG_MX_CYCLIC, see README for further description)
|
||
|
||
* Add support for INKA4X0 board
|
||
|
||
* Patch by Steven Scholz, 12 Dec 2004:
|
||
Fix typo in AT91 memory setup.
|
||
|
||
* Patch by Martin Krause, 27 Oct 2004:
|
||
- add support for "STK52xx" board (including PS/2 multiplexer)
|
||
- add hardware detection for TQM5200
|
||
|
||
* Clean up CMC PU2 flash driver
|
||
|
||
* Update MAINTAINERS file
|
||
|
||
* Fix bug in MPC823 LCD driver
|
||
|
||
* Fix udelay() on AT91RM9200 for delays < 1 ms.
|
||
|
||
* Enable long help on CMC PU2 board;
|
||
fix reset issue;
|
||
increase CPU speed from 179 to 207 MHz.
|
||
|
||
* Fix smc91111 ethernet driver for Xaeniax board (need to handle
|
||
unaligned tail part specially).
|
||
|
||
* Update for AT91RM9200DK and CMC_PU2 boards:
|
||
- Enable booting directly from flash
|
||
- fix CMC_PU2 flash driver
|
||
|
||
* Fix mkimage usage message
|
||
|
||
* Map SRAM on NC650 board
|
||
|
||
* Work around for Ethernet problems on Xaeniax board
|
||
|
||
* Patch by TsiChung Liew, 23 Sep 2004:
|
||
- add support for MPC8220 CPU
|
||
- Add support for Alaska and Yukon boards
|
||
|
||
* Fix configuration for ERIC board (needs more room)
|
||
|
||
* Adjust MIPS compiler options at run-time depending on tools version
|
||
("-march=4kc -mtune=4kc -Wa,-mips_allow_branch_to_undefined" for new,
|
||
"-mcpu=4kc" for old tools)
|
||
|
||
* Add passing of the command line and memory size information to the
|
||
kernel on xaeniax board.
|
||
|
||
* Enable NAND flash support for NC650 board.
|
||
|
||
* Patch by Thomas Lange 07 Oct 2004:
|
||
Updated README for DBAu1x00 boards to match current status
|
||
|
||
* Patch by Philippe Robin, 28 Sept 2004:
|
||
Fix Flash support for Versatile.
|
||
|
||
* Patch by Roger Blofeld, 16 Sep 2004:
|
||
Fix timeout for DHCP command retry
|
||
|
||
* Patch by Pantelis Antoniou, 14 Sep 2004:
|
||
Fix early serial hang when CONFIG_SERIAL_MULTI is defined.
|
||
|
||
* Patch by Pantelis Antoniou, 14 Sep 2004:
|
||
Kick watchdog when bz-decompressing
|
||
|
||
* Fix CFG_HZ problems on AT91RM9200 systems
|
||
[Remember: CFG_HZ should be 1000 on ALL systems!]
|
||
|
||
* Patch by Gridish Shlomi, 30 Aug 2004:
|
||
- Add support to revA version of PQ27 and PQ27E.
|
||
- Reverted MPC8260ADS baudrate back to original 115200
|
||
|
||
* Patch by Hojin, 17 Sep 2004:
|
||
Fix typo in cfi_flash.c
|
||
|
||
* Patch by Mark Jonas, 09 September 2004:
|
||
mtest's data line test (with CFG_ALT_MEMTEST set) returned a wrong
|
||
error message
|
||
|
||
* Patch by Mark Jonas, 31 August 2004:
|
||
Added option CFG_XLB_PIPELINING to enable XLB pipelining. This
|
||
improves FTP performance for MPC5200 systems. Enabled for IceCube
|
||
by default.
|
||
|
||
* Patch by Michael Bendzick, 30 Aug 2004:
|
||
- Improve platform.S code for omap1510inn that detects whether code
|
||
is running from SDRAM or not. Patch allows SDRAM to be configured
|
||
if code is running out of SRAM at 0x20000000.
|
||
|
||
* Patch by Frederick Klatt, 30 Aug 2004:
|
||
Add support for the Wind River SBC8540/SBC8560 boards
|
||
|
||
* Configure SX1 board to use drivers/cfi_flash.c
|
||
|
||
* Patches by Michael Bendzick, 30 Aug 2004:
|
||
- Configure omap1510inn board to use drivers/cfi_flash.c
|
||
- Make drivers/cfi_flash.c protect environment and redundant
|
||
environment.
|
||
|
||
* Patch by Steven Scholz, 23 Jun 2004:
|
||
- Add script (tools/img2brec.sh) to programm U-Boot into
|
||
(Synch)Flash using the Bootstrap Mode of the MC9328MX1/L
|
||
|
||
* Patches by Scott McNutt, 24 Aug 2004:
|
||
- Add support for Altera Nios-II processors.
|
||
- Add support for Psyent PCI-5441 board.
|
||
- Add support for Psyent PK1C20 board.
|
||
|
||
* Patches by Jon Loeliger, 24 Aug 2004:
|
||
- Add support for the MPC8541 and MPC8555 CDS boards
|
||
- Cleanup eth?addr handling: make dependent on CONFIG_ETH?ADDR
|
||
- Convert MPC85xxADS to use common CFI flash driver
|
||
- Fix PCI window on MPC85xx; remove unneeded PCI initialization
|
||
from board_early_init_f()
|
||
- Provide SW workaround for PCI initialization on 85xx CDS
|
||
|
||
* Patches by George G. Davis, 24 Aug 2004:
|
||
- Enable ramdisk/initrd tagged param support for omap1610h2_config
|
||
- Remove static network setup defaults from mx1ads_config
|
||
- update ARM boards to use constants from mach-types.h
|
||
|
||
* Patch by Gary Jennejohn, 04 Oct 2004:
|
||
- fix I2C on at91rm9200
|
||
- add support for Ricoh RS5C372A RTC
|
||
|
||
* Patch by Gary Jennejohn, 01 Oct 2004:
|
||
- add support for CMC PU2 board
|
||
- add support for I2C on at91rm9200
|
||
|
||
* Patch by Gary Jennejohn, 28 Sep 2004:
|
||
fix baudrate handling on at91rm9200
|
||
|
||
* Patch by Yuli Barcohen, 22 Aug 2004:
|
||
- remove ZPC.1900 board-specific flash driver;
|
||
switch the port to generic CFI driver;
|
||
- port clean-up
|
||
|
||
* Patch by Hinko Kocevar, 21 Aug 2004:
|
||
Add calc_fbsize() function used with VIDEOLFB_TAG on TRAB
|
||
|
||
* Clean up tools/bmp_logo.c to not add trailing white space
|
||
|
||
* Patch by Hinko Kocevar, 21 Aug 2004:
|
||
- Group common framebuffer functions in common/lcd.c
|
||
- Group common framebuffer macros and #defines in include/lcd.h
|
||
- Provide calc_fbsize() for video ATAG
|
||
|
||
* Patch by Sam Song, 21 August 2004:
|
||
- Fix a typo in README
|
||
- Align "(RO)" output for "flinfo" after "protect on"
|
||
- Add RESET support for RPXlite_DW board; adjust CPU:BUS frequency
|
||
ratio 1:1 when core frequency less than 50MHz
|
||
|
||
* Patches by Hinko Kocevar, 21 Aug 2004:
|
||
- fix some "use of label at end of compound statement" warnings
|
||
- Define type of LCD panel on lubbock board if CONFIG_LCD is used
|
||
|
||
* Patch by Steven Scholz, 16 Aug 2004:
|
||
- Introducing the concept of SoCs "./cpu/$(CPU)/$(SOC)"
|
||
- creating subdirs for SoCs ./cpu/arm920t/imx and ./cpu/arm920t/s3c24x0
|
||
- moving SoC specific code out of cpu/arm920t/ into cpu/arm920t/$(SOC)/
|
||
- moving drivers/s3c24x0_i2c.c and drivers/serial_imx.c out of drivers/
|
||
into cpu/arm920t/$(SOC)/
|
||
|
||
* Patches by Sean Chang, 09 Aug 2004:
|
||
- Added support for both 8 and 16 bit mode access to System ACE CF
|
||
through MPU.
|
||
- Fixed missing System ACE CF device during get FAT partition info
|
||
in fat_register_device function.
|
||
- Enabled System ACE CF support on ML300.
|
||
|
||
* Patch by Sean Chang, 09 Aug 2004:
|
||
Synch defines for saveenv and do_saveenv functions so they get
|
||
compiled under the same statement.
|
||
|
||
* Patch by Sean Chang, 09 Aug 2004:
|
||
- Added I2C support for ML300.
|
||
- Added support for ML300 to read out its environment information
|
||
stored on the EEPROM.
|
||
- Added support to use board specific parameters as part of
|
||
U-Boot's environment information.
|
||
- Updated MLD files to support configuration for new features
|
||
above.
|
||
|
||
* Patches by Travis Sawyer, 05 Aug 2004:
|
||
- Remove incorrect bridge settings for eth group 6
|
||
- Add call to setup bridge in ppc_440x_eth_initialize
|
||
- Fix ppc_440x_eth_init to reset the phy only if its the
|
||
first time through, otherwise, just check the phy for the
|
||
autonegotiated speed/duplex. This allows the use of netconsole
|
||
- only print the speed/duplex the first time the phy is reset.
|
||
|
||
* Patch by Shlomo Kut, 29 Mar 2004:
|
||
Add support for MKS Instruments "Quantum" board
|
||
|
||
* Fix build problem with Cogent boards;
|
||
avoid using <asm/byteorder.h> when using the host compiler
|
||
|
||
* Patch by Ganapathi C, 04 Aug 2004:
|
||
Fix NFS timeout issue
|
||
|
||
* Patch by Yuli Barcohen, 19 Jul 2004:
|
||
- Fix host tools building in Cygwin environment
|
||
- Fix header files search order for host tools
|
||
|
||
* Patch by Tom Armistead, 19 Jul 2004:
|
||
Fix kgdb.S support for 74xx_75x cpu
|
||
|
||
* Patch by Jon Loeliger, 15 Jul 2004:
|
||
Fix MPC85xx I2C driver
|
||
|
||
* Fix problems with CDROM drive as slave device on Lite5200 IDE bus.
|
||
|
||
* Patch by Stephen Williams, 15 July 2004
|
||
Set the PCI class code for JSE board as part of PCI interface setup
|
||
|
||
* Patch by Michael Bendzick, 15 Jul 2004:
|
||
Fix problem with writes with odd sizes in drivers/cfi_flash.c when
|
||
CFG_FLASH_USE_BUFFER_WRITE is set
|
||
|
||
* Patch by Yuli Barcohen, 13 Jul 2004:
|
||
Allow clock setting on MPC866/MPC885 series chips according to
|
||
environment variable `cpuclk'
|
||
|
||
* Patch by Yuli Barcohen, 20 Apr 2004:
|
||
Remove unnecessary redefine of CPM_DATAONLY_SIZE for MPC826x
|
||
|
||
* Patch by Vincent Dubey, 24 Sep 2004:
|
||
Add support for xaeniax board
|
||
|
||
* Add comment about non-GPL character of standalone applications to
|
||
COPYING file
|
||
|
||
* Fix FEC ethernet problem on NSCU board.
|
||
|
||
* Patch by Gary Jennejohn, 09 Sep 2004:
|
||
allow to use USART1 as console port on at91rm9200dk boards
|
||
|
||
* Patch by Stefan Roese, 16 Sep 2004:
|
||
Update AR405 board.
|
||
|
||
* Fix SysClk handling for PPChameleon and CATcenter boards
|
||
|
||
* Patch by Detlev Zundel, 08 Sep 2004:
|
||
Update etags build target
|
||
|
||
* Improve NetConsole support: add support for broadcast destination
|
||
address and buffered input.
|
||
|
||
* Cleanup compiler warnings for GCC 3.3.x and later
|
||
|
||
* Fix problem in cmd_jffs2.c introduced by CFG_JFFS_SINGLE_PART patch
|
||
|
||
* Add support for IDS "NC650" board
|
||
|
||
* Add automatic update support for LWMON board
|
||
|
||
* Clear Block Lock-Bits when erasing flash on LWMON board.
|
||
|
||
* Fix return code of "fatload" command
|
||
|
||
* Enable MSDOS/VFAT filesystem support for LWMON board
|
||
|
||
* Patch by Martin Krause, 03 Aug 2004:
|
||
change timing for SM501 graphics controller on TQM5200 module
|
||
|
||
* Patch by Mark Jonas, 13 July 2004:
|
||
- Total5200 LCD now run in little endian mode. Endianess conversion
|
||
is done in hardware.
|
||
- Removed last reference to "console" environment variable.
|
||
|
||
* Patches by Lars Munch, 12 Jul 2004:
|
||
- move at45.c to board/at91rm9200dk/ since this is at91rm9200dk
|
||
board specific
|
||
- split out the LXT971A PHY from ns_9750_eth.h
|
||
- split the dm9161 phy part out of at91rm9200_ether.c
|
||
|
||
* Patch by Andreas Engel, 12 Jul 2004:
|
||
Replaced hardcoded PL011 clock frequency with config variable.
|
||
Fixed wrong CONFIG_CMD_DFL doc.
|
||
|
||
* Patch by Thomas Viehweger, 09 Jun 2004:
|
||
make it possible to remove chpart when there is only one partition
|
||
|
||
* Add support for console over UDP (compatible to Ingo Molnar's
|
||
netconsole patch under Linux)
|
||
|
||
* Patch by Jon Loeliger, 16 Jul 2004:
|
||
- support larger DDR memories up to 2G on the PC8540/8560ADS and
|
||
STXGP3 boards
|
||
- Made MPC8540/8560ADS be 33Mhz PCI by default.
|
||
- Removed moldy CONFIG_RAM_AS_FLASH, CFG_FLASH_PORT_WIDTH_16
|
||
and CONFIG_L2_INIT_RAM options.
|
||
- Refactor Local Bus initialization out of SDRAM setup.
|
||
- Re-implement new version of LBC11/DDR11 errata workarounds.
|
||
- Moved board specific PCI init parts out of CPU directory.
|
||
- Added TLB entry for PCI-1 IO Memory
|
||
- Updated README.mpc85xxads
|
||
|
||
* Patch by Sascha Hauer, 28 Jun:
|
||
- add generic support for Motorola i.MX architecture
|
||
- add support for mx1ads, mx1fs2 and scb9328 boards
|
||
|
||
* Patches by Marc Leeman, 23 Jul 2004:
|
||
- Add define for the PCI/Memory Buffer Configuration Register
|
||
- corrected comments in cpu/mpc824x/cpu_init.c
|
||
|
||
* Add support for multiple serial interfaces
|
||
(for example to allow modem dial-in / dial-out)
|
||
|
||
* Patch by Stefan Roese, 15 Jul 2004:
|
||
cpu/ppc4xx/sdram.c rewritten now using get_ram_size()
|
||
|
||
* Fix NSCU config; add ethernet wakeup code.
|
||
|
||
* Add link for preloader for Motorola ColdFire to README.m68k
|
||
|
||
* Patch by Michael Bendzick, 12 Jul 2004:
|
||
fix output formatting in drivers/cfi_flash.c
|
||
|
||
* Patch by Mark Jonas, 02 Jul 2004:
|
||
Fix lowboot (again) on MPC5xxx
|
||
|
||
* Patch by Curt Brune, 07 Jul 2004:
|
||
relocate exception vectors on arm720t if needed
|
||
|
||
* Patch by George G. Davis, 06 Jul 2004:
|
||
- update mach-types.h to latest arm.linux.org.uk master list
|
||
- Set correct OMAP1610 bi_arch_number for build target
|
||
|
||
* Patch by Curt Brune, 06 Jul 2004:
|
||
evb4510: add support for timer interrupt; cleanup
|
||
|
||
* Patch by Dan Poirot, 06 Jul 2004:
|
||
Fix sbc8260 environment variables
|
||
|
||
* Cleanup redundand "console" environment variable
|
||
|
||
* Patch by Mark Jonas, 05 Jul 2004:
|
||
add support for the Total5100's and Total5200's LCD screen
|
||
|
||
* Patches by Dan Eisenhut, 01 Jul 2004:
|
||
- README fixes.
|
||
- Move doc2000.h include to prevent compiler warning on some boards
|
||
|
||
* Patch by Mark Jonas, 01 Jul 2004:
|
||
Added support for Total5100 and Total5200 (Rev.1 and Rev.2)
|
||
MGT5100 and MPC5200 based Freescale platforms.
|
||
|
||
* Patch by Philippe Robin, 01 Jul 2004:
|
||
Add initialization for Integrator and versatile board files.
|
||
|
||
* Patch by Hinko Kocevar, 01 Jun 2004:
|
||
Fix VFD FB allocation, add LCD FB allocation on ARM
|
||
|
||
* Patch by Martin Krause, 30 Jun 2004:
|
||
Add support for TQM5200 board
|
||
|
||
* Patch by Martin Krause, 29 Jun 2004:
|
||
Add loopw command: infinite write loop on address range
|
||
|
||
* Patches by Yasushi Shoji, 29 Jun 2004:
|
||
- add empty include/asm-microblaze/processor.h
|
||
- add to CREDITS and MAINTAINERS
|
||
- add gd initialization
|
||
- add MicroBlaze and SUZAKU board to MAKEALL script
|
||
- add reset support for SUZAKU
|
||
- add flush_cache() for MicroBlaze
|
||
- add CFG_FLASH_SIZE to include/configs/suzaku.h since we have fixed
|
||
size flash memory on SUZAKU
|
||
|
||
* Patch by Prakash Kumar, 27 Jun 2004:
|
||
Add support for the PXA250 based Intrinsyc Cerf board.
|
||
|
||
* Patch by Yasushi Shoji, 27 Jun 2004:
|
||
fix comment in include/common.h
|
||
|
||
* Rename SBC8560 into sbc8560 for consistency
|
||
|
||
* Patch by Daniel Poirot, 24 Jun 2004:
|
||
Add support for Wind River's sbc8240 board
|
||
|
||
* Patches by Yasushi Shoji, 26 Jun 2004:
|
||
- drivers/serial_xuartlite.c: fix "return 0" in void function
|
||
- add microblaze support to mkimage tool
|
||
|
||
* Patch by Fred Klatt, 25 Jun 2004:
|
||
Add support for WindRiver's sbc8560 board
|
||
|
||
* Patch by Nicolas Lacressonniere, 24 Jun 2004
|
||
Small Bugs fixes for "at91rm9200dk" board:
|
||
- Timing modifications for SPI DataFlash access
|
||
- Fix NAND flash detection bug
|
||
|
||
* Patch by Nicolas Lacressonniere, 24 Jun 2004:
|
||
Add Support for Flash AT49BV6416 for AT91RM9200DK board
|
||
|
||
* Patch by Jon Loeliger, 17 June 2004:
|
||
Completion of the 8540ADS/8560ADS updates:
|
||
Fix some PCI and Rapid I/O memory maps,
|
||
Initialize both TSEC 1 and 2,
|
||
Initialize SDRAM
|
||
Update MAINTAINER for 85xx boards and README.mpc85xxads
|
||
|
||
* Patch by Yuli Barcohen, 16 Jun 2004:
|
||
Remove obsolete AdderII port which was superseded by unified
|
||
AdderII/Adder87x port
|
||
|
||
* Patch by Ladislav Michl, 16 Jun 2004:
|
||
Fix gcc-3.3.3 warnings for smc91111.c
|
||
|
||
* Patch by Stefan Roese, 02 Jul 2004:
|
||
- Fix bug in 405 ethernet driver; allocated data not cleared!
|
||
- Fix problem in 405 i2c driver; don't try to print without console!
|
||
|
||
* Patch by Paul Ruhland, 11 Jun 2004:
|
||
Remove debug code from 'board/lpd7a40x/flash.c'
|
||
|
||
* Patch by Andrea Marson, 11 Jun 2004:
|
||
Update for PPChameleon board:
|
||
- support for SysClk @ 25MHz
|
||
- support for Silicon Motion SM712 VGA controller
|
||
- some clean ups
|
||
|
||
* Patches by Richard Woodruff, 10 Jun 2004:
|
||
- fix problems with examples/stubs.c for GCC >= 3.4
|
||
- fix problems with gd initialization
|
||
|
||
* Patch by Curt Brune, 17 May 2004:
|
||
- Add support for Samsung S3C4510B CPU (ARM7tdmi based SoC)
|
||
- Add support for ESPD-Inc. EVB4510 Board
|
||
|
||
* Patch by Marc Leeman, 11 May 2004:
|
||
Fix for MPC8245 - reading PPC Memory from another device with the
|
||
PPC as PCI target device corrupts data due to interenal hardware
|
||
buffering.
|
||
|
||
* Fix "cls" command when used with splash screen
|
||
|
||
* Increase NFS download timeout (now 1 min - 10 sec is to short for a
|
||
slow download of a big image)
|
||
|
||
* Add "cls" function to MPC823 LCD driver so we can reinitialize the
|
||
display even after showing a bitmap
|
||
|
||
* Patch by Josef Wagner, 04 Jun 2004:
|
||
- DDR Ram support for PM520 (MPC5200)
|
||
- support for different flash types (PM520)
|
||
- USB / IDE / CF-Card / DiskOnChip support for PM520
|
||
- 8 bit boot rom support for PM520/CE520
|
||
- Add auto SDRAM module detection for MicroSys CPC45 board (MPC8245)
|
||
- I2C and RTC support for CPC45
|
||
- support of new flash type (28F160C3T) for CPC45
|
||
|
||
* Fix flash parameters passed to Linux for PPChameleon board
|
||
|
||
* Remove eth_init() from lib_arm/board.c; it's done in net.net.c.
|
||
|
||
* Patch by Paul Ruhland, 10 Jun 2004:
|
||
fix support for Logic SDK-LH7A404 board and clean up the
|
||
LH7A404 register macros.
|
||
|
||
* Patch by Matthew McClintock, 10 Jun 2004:
|
||
Modify code to select correct serial clock on Sandpoint8245
|
||
|
||
* Patch by Robert Schwebel, 10 Jun 2004:
|
||
Add support for Intel K3 strata flash.
|
||
|
||
* Patch by Thomas Brand, 10 Jun 2004:
|
||
Fix "loads" command on DK1S10 board
|
||
|
||
* Patch by Yuli Barcohen, 09 Jun 2004:
|
||
Add support for 8MB flash SIMM and JFFS2 file system on
|
||
Motorola FADS board and its derivatives (MPC86xADS, MPC885ADS).
|
||
|
||
* Patch by Yuli Barcohen, 09 Jun 2004:
|
||
Add support for Analogue&Micro Adder87x and the older AdderII board.
|
||
|
||
* Patch by Ming-Len Wu, 09 Jun 2004:
|
||
Add suppport for MC9328 (Dargonball) CPU and Motorola MX1ADS board
|
||
|
||
* Patch by Sam Song, 09 Jun 2004:
|
||
- Add support for RPXlite_DW board
|
||
- Update FLASH driver for 4*AM29DL323DB90VI
|
||
- Add option configuration of CFG_ENV_IS_IN_NVRAM on RPXlite_DW board
|
||
|
||
* Patch by Mark Jonas, 08 June 2004:
|
||
- Make MPC5200 boards evaluate the SVR to print processor name and
|
||
version in checkcpu() (cpu/mpc5xxx/cpu.c).
|
||
|
||
* Patch by Kai-Uwe Bloem, 06 May 2004:
|
||
Fix endianess problem in cramfs code
|
||
|
||
* Patch by Tom Armistead, 04 Jun 2004:
|
||
Add support for MAX6900 RTC
|
||
|
||
* Patches by Ladislav Michl, 03 Jun 2004:
|
||
- fix cfi_flash.c on LE systems
|
||
- let 'make mrproper' delete u-boot.img as well
|
||
- turn printf into debug in cfi_flash.c
|
||
|
||
* Patch by Kurt Stremerch, 28 May 2004:
|
||
Add support for Exys XSEngine board
|
||
|
||
* Patch by Martin Krause, 27 May 2004:
|
||
Fix a MPC5xxx I2C timing issue in i2c_probe().
|
||
|
||
* Patch by Leif Lindholm, 27 May 2004:
|
||
Fix board_init_f() for dbau1x00 board.
|
||
|
||
* Patch by Imre Deak, 26 May 2004:
|
||
On OMAP1610 platforms check if booting from RAM(CS0) or flash(CS3).
|
||
Set flash base accordingly, and decide whether to do or skip board
|
||
specific setup steps.
|
||
|
||
* Patch by Josef Baumgartner, 26 May 2004:
|
||
Add missing define in include/asm-m68k/global_data.h
|
||
|
||
* Patch by Josef Baumgartner, 25 May 2004:
|
||
Add missing functions get_ticks() and get_tbclk() in lib_m68k/time.c
|
||
|
||
* Patch by Paul Ruhland, 24 May 2004:
|
||
fix SDRAM initialization for LPD7A400 board.
|
||
|
||
* Patch by Jian Zhang, 20 May 2004:
|
||
add support for environment in NAND flash
|
||
|
||
* Patch by Yuli Barcohen, 20 May 2004:
|
||
Add support for Interphase iSPAN boards.
|
||
|
||
* Patches by Paul Ruhland, 17 May 2004:
|
||
- Add I/O functions to the smc91111 ethernet driver to support the
|
||
Logic LPD7A40x boards.
|
||
- Add support for the Logic Zoom LH7A40x based SDK board(s),
|
||
specifically the LPD7A400.
|
||
|
||
* Patches by Robert Schwebel, 15 May 2004:
|
||
- call MAC address reading code also for SMSC91C111;
|
||
- make SMSC91C111 timeout configurable, remove duplicate code
|
||
- fix get_timer() for PXA
|
||
- update doc/README.JFFS2
|
||
- use "bootfile" env variable also for jffs2
|
||
|
||
* Patch by Tolunay Orkun, 14 May 2004:
|
||
Add support for Cogent CSB472 board (8MB Flash Rev)
|
||
|
||
* Patch by Thomas Viehweger, 14 May 2004:
|
||
- flash.h: more flash types added
|
||
- immap_8260.h: some bits added (useful for RMII)
|
||
- cmd_coninfo.c: typo corrected, printf -> puts
|
||
- reduced size by replacing spaces with tab
|
||
|
||
* Patch by Robert Schwebel, 13 May 2004:
|
||
Add 'imgextract' command: extract one part of a multi file image.
|
||
|
||
* Patches by Jon Loeliger, 11 May 2004:
|
||
Dynamically handle REV1 and REV2 MPC85xx parts.
|
||
(Jon Loeliger, 10-May-2004).
|
||
New consistent memory map and Local Access Window across MPC85xx line.
|
||
New CCSRBAR at 0xE000_0000 now.
|
||
Add RAPID I/O memory map.
|
||
New memory map in README.MPC85xxads
|
||
(Kumar Gala, 10-May-2004)
|
||
Better board and CPU identification on MPC85xx boards at boot.
|
||
(Jon Loeliger, 10-May-2004)
|
||
SDRAM clock control fixes on MPC8540ADS & MPC8560 boards.
|
||
Some configuration options for MPC8540ADS & MPC8560ADS cleaned up.
|
||
(Jim Robertson, 10-May-2004)
|
||
Rewrite of the MPC85xx Three Speed Ethernet Controller (TSEC) driver.
|
||
Supports multiple PHYs.
|
||
(Andy Fleming, 10-May-2004)
|
||
Some README.MPC85xxads updates.
|
||
(Kumar Gala, 10-May-2004)
|
||
Copyright updates for "Freescale"
|
||
(Andy Fleming, 10-May-2004)
|
||
|
||
* Patch by Stephen Williams, 11 May 2004:
|
||
Add flash support for ST M29W040B
|
||
Reduce JSE specific flash.c to remove dead code.
|
||
|
||
* Patch by Markus Pietrek, 04 May 2004:
|
||
Fix clear_bss code for ARM systems (all except s3c44b0 which
|
||
doesn't clear BSS at all?)
|
||
|
||
* Fix "ping" problem on INC-IP board. Strange problem:
|
||
Sometimes the store word instruction hangs while writing to one of
|
||
the Switch registers, but only if the next instruction is 16-byte
|
||
aligned. Moving the instruction into a separate function somehow
|
||
makes the problem go away.
|
||
|
||
* Patch by Rishi Bhattacharya, 08 May 2004:
|
||
Add support for TI OMAP5912 OSK Board
|
||
|
||
* Patch by Sam Song May, 07 May 2004:
|
||
Fix typo of UPM table for rmu board
|
||
|
||
* Patch by Pantelis Antoniou, 05 May 2004:
|
||
- Intracom board update.
|
||
- Add Codec POST.
|
||
|
||
* Add support for the second Ethernet interface for the 'PPChameleon'
|
||
board.
|
||
|
||
* Patch by Dave Peverley, 30 Apr 2004:
|
||
Add support for OMAP730 Perseus2 Development board
|
||
|
||
* Patch by Alan J. Luse, 29 Apr 2004:
|
||
Fix flash chip-select (OR0) option register setting on FADS boards.
|
||
|
||
* Patch by Alan J. Luse, 29 Apr 2004:
|
||
Report MII network speed and duplex setting properly when
|
||
auto-negotiate is not enabled.
|
||
|
||
* Patch by Jarrett Redd, 29 Apr 2004:
|
||
Fix hang on reset on Ocotea board due to flash in wrong mode.
|
||
|
||
* Patch by Dave Peverley, 29 Apr 2004:
|
||
add MAC address detection to smc91111 driver
|
||
|
||
* Patch by David M<>ller, 28 Apr 2004:
|
||
fix typo in lib_arm/board.c
|
||
|
||
* Patch by Tolunay Orkun, 20 Apr 2004:
|
||
- README update: add CONFIG_CSB272 and csb272_config
|
||
- add descriptions for some MII/PHY options, CONFIG_I2CFAST, and
|
||
i2cfast environment variable
|
||
|
||
* Patch by Yuli Barcohen, 19 Apr 2004:
|
||
- Rename DUET_ADS to MPC885ADS
|
||
- Rename CONFIG_DUET to CONFIG_MPC885_FAMILY
|
||
- Rename CONFIG_866_et_al to CONFIG_MPC866_FAMILY
|
||
- Clean up FADS family port to use the new defines
|
||
|
||
* Fix PCI support on CPC45 board
|
||
|
||
* Patch by Scott McNutt, 25 Apr 2004:
|
||
Add Nios GDB/JTAG Console support:
|
||
- Add stubs to support gdb via JTAG.
|
||
- Add support for console over JTAG.
|
||
- Minor cleanup.
|
||
|
||
* Add support for CATcenter board (based on PPChameleon ME module)
|
||
|
||
* Patch by Klaus Heydeck, 12 May 2004:
|
||
Using external watchdog for KUP4 boards in mpc8xx/cpu.c;
|
||
load_sernum_ethaddr() for KUP4 boards in lib_ppc/board.c;
|
||
various changes to KUP4 board specific files
|
||
|
||
* Fix minor network problem on MPC5200: need some delay between
|
||
resetting the PHY and sending the first packet. Implemented in a
|
||
"natural" way by invoking the PHY reset and initialization code
|
||
only once after power on vs. each time the interface is brought up.
|
||
|
||
* Add some limited support for low-speed devices to SL811 USB controller
|
||
(at least "usb reset" now passes successfully and "usb info" displays
|
||
correct information)
|
||
|
||
* Change init sequence for multiple network interfaces: initialize
|
||
on-chip interfaces before external cards.
|
||
|
||
* Fix memory leak in the NAND-specific JFFS2 code
|
||
|
||
* Fix SL811 USB controller when attached to a USB hub
|
||
|
||
* Fix config option spelling in PM520 config file
|
||
|
||
* Fix PHY discovery problem in cpu/mpc8xx/fec.c (introduced by
|
||
patches by Pantelis Antoniou, 30 Mar 2004)
|
||
|
||
* Fix minor NAND JFFS2 related issue
|
||
|
||
* Fixes for SL811 USB controller:
|
||
- implement workaround for broken memory stick
|
||
- improve error handling
|
||
|
||
* Increase packet send timeout to 1 ms in cpu/mpc8xx/scc.c to better
|
||
cope with congested networks.
|
||
|
||
======================================================================
|
||
Changes for U-Boot 1.1.1:
|
||
======================================================================
|
||
|
||
* Patch by Travis Sawyer, 23 Apr 2004:
|
||
Fix VSC/CIS 8201 phy descrambler interoperability timing due to
|
||
errata from Vitesse Semiconductor.
|
||
|
||
* Patch by Philippe Robin, 22 Apr 2004:
|
||
Fix ethernet configuration for "versatile" board
|
||
|
||
* Patch by Kshitij Gupta, 21 Apr 2004:
|
||
Remove busy loop and use MPU timer fr usleep() on OMAP1510/1610 boards
|
||
|
||
* Patch by Steven Scholz, 24 Feb 2004:
|
||
Fix a bug in AT91RM9200 ethernet driver:
|
||
The MII interface is now initialized before accessing the PHY.
|
||
|
||
* Patch by John Kerl, 19 Apr 2004:
|
||
Use U-boot's miiphy.h for PHY register names, rather than
|
||
introducing a new header file.
|
||
|
||
* Update pci_ids.h from linux-2.4.26
|
||
|
||
* Patch by Masami Komiya, 19 Apr 2004:
|
||
Fix problem cause by VLAN function on little endian architecture
|
||
without VLAN environment
|
||
|
||
* Clean up the TQM8xx_YYMHz configurations; allow to use the same
|
||
binary image for all clock frequencies. Implement run-time
|
||
optimization of flash access timing based on the actual bus
|
||
frequency.
|
||
|
||
* Modify KUP4X board configuration to use SL811 driver for USB memory
|
||
sticks (including FAT / VFAT filesystem support)
|
||
|
||
* Add SL811 Host Controller Interface driver for USB
|
||
|
||
* Add CFG_I2C_EEPROM_ADDR_OVERFLOW desription to README
|
||
|
||
* Patch by Pantelis Antoniou, 19 Apr 2004:
|
||
Allow to use shell style syntax (i. e. ${var} ) with standard parser.
|
||
Minor patches for Intracom boards.
|
||
|
||
* Patch by Christian Pell, 19 Apr 2004:
|
||
cleanup support for CF/IDE on PCMCIA for PXA25X
|
||
|
||
* Temporarily disabled John Kerl's extended MII command code because
|
||
"miivals.h" is missing
|
||
|
||
* Patches by Mark Jonas, 13 Apr 2004:
|
||
- Remove CS0 chip select timing setting from cpu/mpc5xxx/start.S
|
||
- Add sync instructions to IceCube SDRAM init code
|
||
- Move SDRAM chip constants into seperate include files
|
||
- Unify DDR and SDR initialization code
|
||
- Unify all IceCube (Lite5xxx) target names
|
||
|
||
* Patch by John Kerl, 16 Apr 2004:
|
||
Enable ranges in mii command, e.g. mii read 0-1f 0 or
|
||
mii read 4-7 18-1a. Also add mii dump subcommand for
|
||
pretty-printing standard regs 0-5.
|
||
|
||
* Patch by Stephen Williams, 16 April 2004:
|
||
fix typo in JSE.h; update MAINTAINERS
|
||
|
||
* Patch by Matthew S. McClintock, 14 Apr 2004:
|
||
fix initdram function for utx8245 board
|
||
|
||
* Patch by Markus Pietrek, 14 Apr 2004:
|
||
use ATAG_INITRD2 instead of deprecated ATAG_INITRD tag
|
||
|
||
* Patch by Reinhard Meyer, 18 Apr 2004:
|
||
provide the IDE Reset Function for EMK 5200 boards
|
||
|
||
* Patch by Masami Komiya, 12 Apr 2004:
|
||
fix pci_hose_write_config_{byte,word}_via_dword problems
|
||
|
||
* Patch by Sangmoon Kim, 12 Apr 2004:
|
||
Update max RAM size for debris board
|
||
|
||
* Patch by Travis Sawyer, 08 Apr 2004:
|
||
Add TLB entry for second DIMM slot on ocotea
|
||
|
||
* Patch by Masami Komiya, 08 Apr 2004:
|
||
add RTL8169 network driver
|
||
|
||
* Patch by Dan Malek, 07 Apr 2004:
|
||
- Add support for RPC/STx GP3, Motorola 8560 board
|
||
- Update 85xx TSEC driver so it searches MII for first available PHY
|
||
and uses that one.
|
||
- Add functions to support console MII commands.
|
||
|
||
* Patch by Tolunay Orkun, 07 Apr 2004:
|
||
Move initialization of bi_iic_fast[]
|
||
from board_init_f() to board_init_r()
|
||
|
||
* Patch by Yasushi Shoji, 07 Apr 2004:
|
||
Cleanup microblaze port
|
||
|
||
* Patch by Sangmoon Kim, 07 Apr 2004:
|
||
Add auto SDRAM module detection for Debris board
|
||
|
||
* Patch by Rune Torgersen, 06 Apr 2004:
|
||
- Fix some PCI problems on the MPC8266ADS board
|
||
- Fix the location of some PCI entries in the immap structure
|
||
|
||
* Patch by Yasushi Shoji, 07 Apr 2004:
|
||
- add support for microblaze processors
|
||
- add support for AtmarkTechno "suzaku" board
|
||
|
||
* Configure PPChameleon board to use redundand environment in flash
|
||
|
||
* Configure PPChameleon board to use JFFS2 NAND support.
|
||
|
||
* Added support for JFFS2 filesystem (read-only) on top of NAND flash
|
||
|
||
* Patch by Rune Torgersen, 16 Apr 2004:
|
||
LBA48 fixes
|
||
|
||
* Patches by Pantelis Antoniou, 16 Apr 2004:
|
||
- add support for a new version of an Intracom board and fix
|
||
various other things on others.
|
||
- add verify support to the crc32 command (define
|
||
CONFIG_CRC32_VERIFY to enable it)
|
||
- fix FEC driver for MPC8xx systems:
|
||
1. fix compilation problems for boards that use dynamic
|
||
allocation of DPRAM
|
||
2. shut down FEC after network transfers
|
||
- HUSH parser fixes:
|
||
1. A new test command was added. This is a simplified version of
|
||
the one in the bourne shell.
|
||
2. A new exit command was added which terminates the current
|
||
executing script.
|
||
3. Fixed handing of $? (exit code of last executed command)
|
||
- Fix some compile problems;
|
||
add "once" functionality for the netretry variable
|
||
|
||
* Patch by George G. Davis, 02 Apr 2004:
|
||
add support for Intel Assabet board
|
||
|
||
* Patch by Stephen Williams, 01 Apr 2004:
|
||
Add support for Picture Elements JSE board
|
||
|
||
* Patch by Christian Pell, 01 Apr 2004:
|
||
Add CompactFlash support for PXA systems.
|
||
|
||
* Patches by Pantelis Antoniou, 30 Mar 2004:
|
||
- add auto-complete support to the U-Boot CLI
|
||
- add support for NETTA and NETPHONE boards; fix NETVIA board
|
||
- add support for the Epson 156x series of graphical displays
|
||
(These displays are serial and not suitable for using a normal
|
||
framebuffer console on them)
|
||
- add infrastructure needed in order to POST any DSPs in a board
|
||
- improve and fix various things in the MPC8xx FEC driver:
|
||
1. The new 87x and 88x series of processors have two FECs,
|
||
and the new driver supports them both.
|
||
2. Another change in the 87x/88x series is support for
|
||
the RMII (Reduced MII) interface. However numerous
|
||
changes are needed to make it work since the PHYs
|
||
are connected to the same lines. That means that
|
||
you have to address them correctly over the MII
|
||
interface.
|
||
3. We now correctly match the MII/RMII interface
|
||
configuration to what the PHY reports.
|
||
- Fix problem when readingthe MII status register. Due to the
|
||
internal design of many PHYs you have to read the register
|
||
twice. The problem is more apparent in 10Mbit mode.
|
||
- add new mode ".jffs2s" for reading from a NAND device: it just
|
||
skips over bad blocks.
|
||
- add networking support for VLANs (802.1q), and CDP (Cisco
|
||
Discovery Protocol)
|
||
- some minor patches / cleanup
|
||
|
||
* Patch by Yuli Barcohen, 28 Mar 2004:
|
||
- Add support for MPC8272 family including MPC8247/8248/8271/8272
|
||
- Add support for MPC8272ADS evaluation board (another flavour of MPC8260ADS)
|
||
- Change configuration method for MPC8260ADS family
|
||
|
||
* add startup code to clear the BSS of standalone applications
|
||
|
||
* Fix if / elif handling bug in HUSH shell
|
||
|
||
======================================================================
|
||
Changes for U-Boot 1.1.0:
|
||
======================================================================
|
||
|
||
* Patch by Mark Jonas: Remove config.tmp files only when
|
||
unconfiguring the board
|
||
|
||
* Adapt RMU board for bigger flash memory
|
||
|
||
* Patch by Klaus Heydeck, 13 Mar 2003:
|
||
Add support for KUP4X Board
|
||
|
||
* Patch by Pavel Bartusek, 21 Mar 2004
|
||
Add Reiserfs support
|
||
|
||
* Patch by Hinko Kocevar, 20 Mar 2004
|
||
- Add auto-release for SMSC LAN91c111 driver
|
||
- Add save/restore of PTR and PNR regs as suggested in datasheet
|
||
|
||
* Patch by Stephen Williams, 19 March 2004
|
||
Increase speed of sector reads from SystemACE,
|
||
shorten poll timeout and remove a useless reset
|
||
|
||
* Patch by Tolunay Orkun, 19 Mar 2004:
|
||
Make GigE PHY 1000Mbps Speed/Duplex detection conditional
|
||
(CONFIG_PHY_GIGE)
|
||
|
||
* Patch by Brad Kemp, 18 Mar 2004:
|
||
prevent machine checks during a PCI scan
|
||
|
||
* Patch by Pierre Aubert, 18 Mar 2004:
|
||
Fix string cleaning in IDE identification
|
||
|
||
* Patch by Pierre Aubert, 18 Mar 2004:
|
||
- Unify video mode handling for Chips & Technologies 69000 Video
|
||
chip and Silicon Motion SMI 712/710/810 Video chip
|
||
- Add selection of the video output (CRT or LCD) via 'videoout'
|
||
environment variable for the Silicon Motion
|
||
- README update
|
||
|
||
* Patch by Pierre Aubert, 18 Mar 2004:
|
||
include/common.h typo fix
|
||
|
||
* Patches by Tolunay Orkun, 17 Mar 2004:
|
||
- Add support for bd->bi_iic_fast[] initialization via environment
|
||
variable "i2cfast" (CONFIG_I2CFAST)
|
||
- Add "i2cfast" u-boot environment variable support for csb272
|
||
|
||
* Patch by Carl Riechers, 17 Mar 2004:
|
||
Ignore '\0' characters in console input for use with telnet and
|
||
telco pads.
|
||
|
||
* Patch by Leon Kukovec, 17 Mar 2004:
|
||
typo fix for strswab prototype #ifdef
|
||
|
||
* Patches by Thomas Viehweger, 16 Mar 2004:
|
||
- show PCI clock frequency on MPC8260 systems
|
||
- add FCC_PSMR_RMII flag for HiP7 processors
|
||
- in do_jffs2_fsload(), take load address from load_addr if not set
|
||
explicit, update load_addr otherwise
|
||
- replaced printf by putc/puts when no formatting is needed
|
||
(smaller code size, faster execution)
|
||
|
||
* Patch by Phillippe Robin, 16 Mar 2004:
|
||
avoid dereferencing NULL pointer in lib_arm/armlinux.c
|
||
|
||
* Patch by Stephen Williams, 15 Mar 2004:
|
||
Fix CONFIG_SERIAL_SOFTWARE_FIFO documentation
|
||
|
||
* Patch by Tolunay Orkun, 15 Mar 2004:
|
||
Initialize bi_opbfreq to real OPB frequency via get_OPB_freq()
|
||
|
||
* Patch by Travis Sawyer, 15 Mar 2004:
|
||
Update CREDITS & MAINTAINERS files for PPC440GX & Ocotea port
|
||
|
||
* Add start-up delay to make sure power has stabilized before
|
||
attempting to switch on USB on SX1 board.
|
||
|
||
* Patch by Josef Wagner, 18 Mar 2004:
|
||
- Add support for MicroSys XM250 board (PXA255)
|
||
- Add support for MicroSys PM828 board (MPC8280)
|
||
- Add support for 32 MB Flash on PM825/826
|
||
- new SDRAM refresh rate for PM825/PM826
|
||
- added support for MicroSys PM520 (MPC5200)
|
||
- replaced Query by Identify command in CPU86/flash.c
|
||
to support 28F160F3B
|
||
|
||
* Fix wrap around problem with udelay() on ARM920T
|
||
|
||
* Add support for Macronix flash on TRAB board
|
||
|
||
* Patch by Pierre Aubert, 15 Mar 2004:
|
||
Fix buffer overflow in IDE identification
|
||
|
||
* Fix power-off of LCD for out-of-band temperatures on LWMON board
|
||
|
||
* Remove redundand #define in IceCube.h
|
||
|
||
* Patch by Steven Scholz, 27 Feb 2004:
|
||
- Adding get_ticks() and get_tbclk() for AT91RM9200
|
||
- Many white space fixes in cpu/at91rm9200/interrupts.c
|
||
|
||
* Patches by Steven Scholz, 20 Feb 2004:
|
||
some cleanup in AT91RM9200 related code
|
||
|
||
* Patches by Travis Sawyer, 12 Mar 2004:
|
||
- Fix Gigabit Ethernet support for 440GX
|
||
- Add Gigabit Ethernet Support to MII PHY utilities
|
||
|
||
* Patch by Brad Kemp, 12 Mar 2004:
|
||
Fixes for drivers/cfi_flash.c:
|
||
- Better support for x8/x16 implementations
|
||
- Added failure for AMD chips attempting to use CFG_FLASH_USE_BUFFER_WRITE
|
||
- Added defines for AMD command and address constants
|
||
|
||
* Patch by Leon Kukovec, 12 Mar 2004:
|
||
Fix get_dentfromdir() to correctly handle deleted dentries
|
||
|
||
* Patch by George G. Davis, 11 Mar 2004:
|
||
Remove hard coded network settings in TI OMAP1610 H2
|
||
default board config
|
||
|
||
* Patch by George G. Davis, 11 Mar 2004:
|
||
add support for ADS GraphicsClient+ board.
|
||
|
||
* Patch by Pierre Aubert, 11 Mar 2004:
|
||
- add bitmap command and splash screen support in cfb console
|
||
- add [optional] origin in the bitmap display command
|
||
|
||
* Patch by Travis Sawyer, 11 Mar 2004:
|
||
Fix ocotea board early init interrupt setup.
|
||
|
||
* Patch by Thomas Viehweger, 11 Mar 2004:
|
||
Remove redundand code; add PCI-specific bits to include/mpc8260.h
|
||
|
||
* Patch by Stephan Linz, 09 Mar 2004
|
||
- Add support for the SSV ADNP/ESC1 (Nios Softcore)
|
||
|
||
* Patch by George G. Davis, 9 Mar 2004:
|
||
fix recent build failure for SA1100 target
|
||
|
||
* Patch by Travis Sawyer, 09 Mar 2004:
|
||
Support native interrupt mode for the IBM440GX.
|
||
Previously it was running in 440GP compatibility mode.
|
||
|
||
* Patch by Philippe Robin, 09 Mar 2004:
|
||
Added ARM Integrator AP, CP and Versatile PB926EJ-S Reference
|
||
Platform support.
|
||
|
||
* Patch by Masami Komiya, 08 Mar 2004:
|
||
Don't overwrite server IP address or boot file name
|
||
when the boot server does not return values
|
||
|
||
* Patch by Tolunay Orkun, 5 Mar 2004:
|
||
Removed compile time restriction on CFG_I2C_SPEED for DS1338 RTC
|
||
|
||
* Patch by Tolunay Orkun, 5 Mar 2004:
|
||
Fix early board initialization for Cogent CSB272 board
|
||
|
||
* Patch by Ed Okerson, 3 Mar 2004:
|
||
fix CFI flash writes for little endian systems
|
||
|
||
* Patch by Reinhard Meyer, 01 Mar 2004:
|
||
generalize USB and IDE support for MPC5200 with according
|
||
changes to IceCube.h and TOP5200.h
|
||
add Am29LV256 256 MBit FLASH support for TOP5200 boards
|
||
add info about USB and IDE to README
|
||
|
||
* Patch by Yuli Barcohen, 4 Mar 2004:
|
||
Fix problems with GCC 3.3.x which changed handling of global
|
||
variables explicitly initialized to zero (now in .bss instead of
|
||
.data as before).
|
||
|
||
* Patch by Leon Kukovec, 02 Mar 2004:
|
||
add strswab() to fix IDE LBA capacity, firmware and model numbers
|
||
on little endian machines
|
||
|
||
* Patch by Masami Komiya, 02 Mar 2004:
|
||
- Remove get_ticks() from NFS code
|
||
- Add verification of RPC transaction ID
|
||
|
||
* Patch by Pierre Aubert, 02 Mar 2004:
|
||
cleanup for IDE and USB drivers for MPC5200
|
||
|
||
* Patch by Travis Sawyer, 01 Mar 2004:
|
||
Ocotea:
|
||
- Add IBM PPC440GX Ref Platform support (Ocotea)
|
||
Original code by Paul Reynolds <PaulReynolds@lhsolutions.com>
|
||
Adapted to U-Boot and 440GX port
|
||
440gx_enet.c:
|
||
- Add gracious handling of all Ethernet Pin Selections for 440GX
|
||
- Add RGMII selection for Cicada CIS8201 Gigabit PHY
|
||
ppc440.h:
|
||
- Add needed bit definitions
|
||
- Fix formatting
|
||
|
||
* Patch by Carl Riechers, 1 Mar 2004:
|
||
Add PPC440GX prbdv0 divider to fix memory clock calculation.
|
||
|
||
* Patch by Stephan Linz, 27 Feb 2004
|
||
- avoid problems for targets without NFS download support
|
||
|
||
* Patch by Rune Torgersen, 27 Feb 2004:
|
||
- Added LBA48 support (CONFIG_LBA48 & CFG_64BIT_LBA)
|
||
- Added support for 64bit printing in vsprintf (CFG_64BIT_VSPRINTF)
|
||
- Added support for 64bit strtoul (CFG_64BIT_STRTOUL)
|
||
|
||
* Patch by Masami Komiya, 27 Feb 2004:
|
||
Fix rarpboot: add autoload by NFS
|
||
|
||
* Patch by Dan Eisenhut, 26 Feb 2004:
|
||
fix flash_write return value in saveenv
|
||
|
||
* Patch by Stephan Linz, 11 Dec 2003
|
||
expand config.mk to avoid trigraph warnings on NIOS
|
||
|
||
* Rename "BMS2003" board into "HMI10"
|
||
|
||
* SX1 patches: use "serial#" for USB serial #; use redundand environment
|
||
storage; auto-set console on USB port (using preboot command)
|
||
|
||
* Add support for SX1 mobile phone; add support for USB-based console
|
||
(enable with "setenv stdout usbtty; setenv stdin usbtty")
|
||
|
||
* Fix LOWBOOT configuration for MPC5200 with DDR memory
|
||
|
||
* Fix SDRAM timings for LITE5200 / IceCube board
|
||
|
||
* Handle Auti-MDIX / connection status for INCA-IP
|
||
|
||
* Fix USB problems when attempting to read 0 bytes
|
||
|
||
* Patch by Travis Sawyer, 26 Feb 2004:
|
||
Fix broken compile for XPEDITE1K target.
|
||
|
||
* Patch by Stephan Linz, 26 Feb 2004:
|
||
Bug fix for NFS code on NIOS targets
|
||
|
||
* Patch by Stephen Williams, 26 Feb 2004:
|
||
Break up SystemACE reads of large block counts
|
||
|
||
* Patch by Pierre Aubert, 26 Feb 2004
|
||
add IDE support for MPC5200
|
||
|
||
* Patch by Masami Komiya, 26 Feb 2004:
|
||
add autoload via NFS
|
||
|
||
* Patch by Stephen Williams
|
||
Use of CONFIG_SERIAL_SOFTWARE_FIFO in board.c consistent with uses
|
||
elsewhere in the source.
|
||
|
||
* Patch by Steven Scholz, 25 Feb 2004:
|
||
- Timeouts in FPGA code should be based on CFG_HZ
|
||
- Minor cleanup in code for Altera FPGA ACEX1K
|
||
|
||
* Patch by Steven Scholz, 25 Feb 2004:
|
||
Changed "Directory Hierarchy" section in README
|
||
|
||
* Patch by Masami Komiya, 25 Feb 2004:
|
||
Reduce copy count in nfs_read_reply() of NFS code
|
||
|
||
* Patch by Markus Pietrek, 24 Feb 2004:
|
||
NS9750 DevBoard added
|
||
|
||
* Patch by Pierre Aubert, 24 Feb 2004
|
||
add USB support for MPC5200
|
||
|
||
* Patch by Steven Scholz, 24 Feb 2004:
|
||
- fix MII commands to use values from last command
|
||
|
||
* Patch by Torsten Demke, 24 Feb 2004:
|
||
Add support for the eXalion platform (SPSW-8240, F-30, F-300)
|
||
|
||
* Patch by Rahul Shanbhag, 19 Feb 2004:
|
||
Fixes for for OMAP1610 board:
|
||
- shift some IRQ specific code to platform.S file
|
||
- remove duplicatewatchdog reset code from start.S
|
||
|
||
* Make Auto-MDIX Support configurable on INCA-IP board
|
||
|
||
* Fix license for mkimage tool
|
||
|
||
* Patch by Masami Komiya, 24 Feb 2004:
|
||
Update NetBootFileXferSize in NFS code
|
||
|
||
* Patch by Scott McNutt, 24 Feb 2004:
|
||
fix packet length in NFS code
|
||
|
||
* Patch by Masami Komiy, 22 Feb 2004:
|
||
Add support for NFS for file download
|
||
|
||
* Patch by Andrea Scian, 17 Feb 2004:
|
||
Add support for S3C44B0 processor and DAVE B2 board
|
||
|
||
* Patch by Steven Scholz, 20 Feb 2004:
|
||
- Add support for MII commands on AT91RM9200 boards
|
||
- some cleanup in AT91RM9200 ethernet code
|
||
|
||
* Patch by Peter Ryser, 20 Feb 2004:
|
||
Add support for the Xilinx ML300 platform
|
||
|
||
* Patch by Stephan Linz, 17 Feb 2004:
|
||
Fix watchdog support for NIOS
|
||
|
||
* Patch by Josh Fryman, 16 Feb 2004:
|
||
Fix byte-swapping for cfi_flash.c for different bus widths
|
||
|
||
* Patch by Jon Diekema, 14 Jeb 2004:
|
||
Remove duplicate "FPGA Support" notes from the README file
|
||
|
||
* Patches by Reinhard Meyer, 14 Feb 2004:
|
||
- update board/emk tree; use common flash driver
|
||
- Corrected tested bits in machine check exception in cpu/mpc5xxx/traps.c
|
||
[adapted for other PPC CPUs -- wd]
|
||
- Added support for the M48T08 on the EVAL5200 board in rtc/mk48t59.c
|
||
|
||
* Patch by Jon Diekema, 13 Feb 2004:
|
||
Call show_boot_progress() whenever POST "FAILED" is printed.
|
||
|
||
* Patch by Nishant Kamat, 13 Feb 2004:
|
||
Add support for TI OMAP1610 H2 Board
|
||
Fixes for cpu/arm926ejs/interrupt.c
|
||
(based on Richard Woodruff's patch for arm925, 16 Oct 03)
|
||
Fix for a timer bug in OMAP1610 Innovator
|
||
Add support for CS0 (ROM)/CS3 (Flash) boot in OMAP1610 Innovator and H2
|
||
|
||
* Patches by Stephan Linz, 12 Feb 2004:
|
||
- add support for NIOS timer with variable period preload counter value
|
||
- prepare POST framework support for NIOS targets
|
||
|
||
* Patch by Denis Peter, 11 Feb 2004:
|
||
add POST support for the MIP405 board
|
||
|
||
* Patch by Laurent Mohin, 10 Feb 2004:
|
||
Fix buffer overflow in common/usb.c
|
||
|
||
* Patch by Tolunay Orkun, 10 Feb 2004:
|
||
Add support for Cogent CSB272 board
|
||
|
||
* Patch by Thomas Elste, 10 Feb 2004:
|
||
Add support for NET+50 CPU and ModNET50 board
|
||
|
||
* Patch by Sam Song, 10 Feb 2004:
|
||
Fix typos in cfi_flash.c
|
||
|
||
* Patch by Leon Kukovec, 10 Feb 2004
|
||
Fixed long dir entry slot id calculation in get_vfatname
|
||
|
||
* Patch by Robin Gilks, 10 Feb 2004:
|
||
add "itest" command (operators: -eq, -ne, -lt, -gt, -le, -ge, ==,
|
||
!=, <>, <, >, <=, >=)
|
||
|
||
* Fix problem with side effects in macros in include/usb.h
|
||
|
||
* Patch by David Benson, 13 Nov 2003:
|
||
bug 841358 - fix TFTP download size limit
|
||
|
||
* Fixing bug 850768:
|
||
improper flush_cache() in load_serial()
|
||
|
||
* Fixing bug 834943:
|
||
MPC8540 - missing volatile declarations
|
||
|
||
* Patch by Stephen Williams, 09 Feb 2004:
|
||
Add support for Xilinx SystemACE chip:
|
||
- New files common/cmd_ace.c and include/systemace.h
|
||
- Hook systemace support into cmd_fat and the partition manager
|
||
|
||
* Patch by Travis Sawyer, 09 Feb 2004:
|
||
Add bi_opbfreq & bi_iic_fast to 440GX bd_info as needed for Linux
|
||
|
||
* Patch by Travis Sawyer, 09 Feb 2004:
|
||
o 440GX:
|
||
- Fix PCI Indirect access for type 1 config cycles with ppc440.
|
||
- Add phymode for 440 enet
|
||
- fix pci pre init
|
||
o XPedite1K:
|
||
- Change board_pre_init to board_early_init_f
|
||
- Add user flash to bus controller setup
|
||
- Fix pci pre init
|
||
- Fix is_pci_host to check GPIO for monarch bit
|
||
- Force xpedite1k to pci conventional mode (via #define option)
|
||
|
||
* Patch by Brad Kemp, 4 Feb 2004:
|
||
- handle the machine check that is generated during the PCI scans
|
||
on 82xx processors.
|
||
- define the registers used in the IMMR by the PCI subsystem.
|
||
|
||
* Patch by Pierre Aubert, 03 Feb 2004:
|
||
cpu/mpc5xxx/start.S: copy MBAR into SPR311
|
||
|
||
* Patch by Jeff Angielski, 03 Feb 2004:
|
||
Fix copy & paste error in cpu/mpc8260/pci.c
|
||
|
||
* Patch by Reinhard Meyer, 24 Jan 2004:
|
||
Fix typo in cpu/mpc5xxx/pci_mpc5200.c
|
||
|
||
* Add Auto-MDIX support for INCA-IP
|
||
|
||
* Some code cleanup
|
||
|
||
* Patch by Josef Baumgartner, 10 Feb 2004:
|
||
Fixes for ColdFire port
|
||
|
||
* Patch by Brad Kemp, 11 Feb 2004:
|
||
Fix CFI flash driver problems
|
||
|
||
* Make sure to use a bus clock divider of 2 only when running TQM8xxM
|
||
modules at CPU clock frequencies above 66 MHz.
|
||
|
||
* Optimize flash programming speed for LWMON (by another 100% :-)
|
||
|
||
* Patch by Jian Zhang, 3 Feb 2004:
|
||
- Changed the incorrect FAT12BUFSIZE
|
||
- data_begin in fsdata can be negative. Changed it to be short.
|
||
|
||
* Patches by Stephan Linz, 30 Jan 2004:
|
||
1: - board/altera/common/flash.c:flash_erase():
|
||
o allow interrupts befor get_timer() call
|
||
o check-up each erased sector and avoid unexpected timeouts
|
||
- board/altera/dk1c20/dk1s10.c:board_early_init_f():
|
||
o enclose sevenseg_set() in cpp condition
|
||
- remove the ASMI configuration for DK1S10_standard_32 (never present)
|
||
- fix some typed in mistakes in the NIOS documentation
|
||
2: - split DK1C20 configuration into several header files:
|
||
o two new files for each NIOS CPU description
|
||
o U-Boot related part is remaining in DK1C20.h
|
||
3: - split DK1S10 configuration into several header files:
|
||
o two new files for each NIOS CPU description
|
||
o U-Boot related part is remaining in DK1S10.h
|
||
4: - Add support for the Microtronix Linux Development Kit
|
||
NIOS CPU configuration at the Altera Nios Development Kit,
|
||
Stratix Edition (DK-1S10)
|
||
5: - Add documentation for the Altera Nios Development Kit,
|
||
Stratix Edition (DK-1S10)
|
||
6: - Add support for the Nios Serial Peripharel Interface (SPI)
|
||
(master only)
|
||
7: - Add support for the common U-Boot SPI framework at
|
||
RTC driver DS1306
|
||
|
||
* Patch by Rahul Shanbhag, 28 Jan 2004:
|
||
Fix flash protection/locking handling for OMAP1610 innovator board.
|
||
|
||
* Patch by Rolf Peukert, 28 Jan 2004:
|
||
fix flash write problems on CSB226 board (write with 32 bit bus width)
|
||
|
||
* Patches by Mark Jonas, 16 Jan 2004:
|
||
- fix rounding error when calculating baudrates for MPC5200 PSCs
|
||
- make sure CFG_RAMBOOT and CFG_LOWBOOT are not enabled at the same
|
||
time which is not supported
|
||
|
||
* Patch by Yuli Barcohen, 26 Jan 2004:
|
||
Allow bzip2 compression for small memory footprint boards
|
||
|
||
* Patch by Brad Kemp, 21 Jan 2004:
|
||
Add support for CFI flash driver for both the Intel and the AMD
|
||
command sets.
|
||
|
||
* Patch by Travis Sawyer, 20 Jan 2004:
|
||
Fix pci bridge auto enumeration of sibling p2p bridges.
|
||
|
||
* Patch by Tolunay Orkun, 12 Jan 2004:
|
||
Add some delays as needed for Intel LXT971A PHY support
|
||
|
||
* Patches by Stephan Linz, 09 Jan 2004:
|
||
- avoid warning: unused variable `piop' in board/altera/common/sevenseg.c
|
||
- make DK1C20 board configuration related to ASMI conform to
|
||
documentation
|
||
|
||
* Patch by Anders Larsen, 09 Jan 2004:
|
||
|
||
ARM memory layout fixes: the abort-stack is now set up in the
|
||
correct RAM area, and the BSS is zeroed out as it should be.
|
||
|
||
Furthermore, the magic variables 'armboot_end' and 'armboot_end_data'
|
||
of the linker scripts are replaced by '__bss_start' and '_end',
|
||
resp., which is a further step to eliminate unnecessary differences
|
||
between the implementation of the CPU architectures.
|
||
|
||
* Patch by liang a lei, 9 Jan 2004:
|
||
Fix Intel 28F128J3 ID in include/flash.h
|
||
|
||
* Patch by Masami Komiya, 09 Jan 2004:
|
||
add support for TB0229 board (NEC VR4131 MIPS processor)
|
||
|
||
* Patch by Leon Kukovec, 12 Dec 2003:
|
||
changed extern __inline__ into static __inline__ in
|
||
include/linux/byteorder/swab.h
|
||
|
||
* Patch by Travis Sawyer, 30 Dec 2003:
|
||
Add support for IBM PPC440GX. Multiple EMAC Ethernet devices,
|
||
select MDI port based on enabled EMAC device.
|
||
Add support for XES Inc <http://www.xes-inc.com> XPedite1000 440GX
|
||
base PrPMC board.
|
||
|
||
* Patch by Wolter Kamphuis, 15 Dec 2003:
|
||
made CONFIG_SILENT_CONSOLE usable on all architectures
|
||
|
||
* Disable date command on TQM866M - there is no RTC on MPC866
|
||
|
||
* Fix variable CPU clock for MPC859/866 systems for low CPU clocks
|
||
|
||
* Implement adaptive SDRAM timing configuration based on actual CPU
|
||
clock frequency for INCA-IP; fix problem with board hanging when
|
||
switching from 150MHz to 100MHz
|
||
|
||
* Add PCMCIA CS support for BMS2003 board
|
||
|
||
* Add variable CPU clock for MPC859/866 systems (so far only TQM866M):
|
||
see doc/README.MPC866 for details;
|
||
implement workaround for "SIU4" and "SIU9" silicon bugs on MPC866;
|
||
calculate CPU clock frequency from PLL register values.
|
||
|
||
* Add support for 128 MB RAM on TQM8xxL/M modules
|
||
|
||
* Fix PS/2 keyboard problem caused by statically initialized variable
|
||
pointing to a location in flash
|
||
|
||
* Fix INCA-IP clock calculation: 400/3 = 133.3 MHz, not 130.
|
||
|
||
* The PS/2 mux on the BMS2003 board needs 450 ms after power on
|
||
before we can access it; add delay in case we are faster (with no
|
||
CF card inserted)
|
||
|
||
* Cleanup of some init functions
|
||
|
||
* Make sure SCC Ethernet is always stopped by the time we boot Linux
|
||
to avoid Linux crashes by early packets coming in.
|
||
|
||
* Accelerate flash accesses on LWMON board by using buffered writes
|
||
|
||
* Fix typo in Makefile;
|
||
fix problem with PARTNUM detection
|
||
|
||
* Patch by Reinhard Meyer, 09 Jan 2004:
|
||
- add RTC support for MPC5200 based boards (requires RTC_XTAL)
|
||
|
||
* Add support for IDE LED on BMS2003 board
|
||
(exclusive with status LED!)
|
||
|
||
* Add support for PS/2 keyboard (used with PS/2 multiplexor on
|
||
BMS2003 board)
|
||
|
||
* Patches by Reinhard Meyer, 4 Jan 2004 + 7 Jan 2004:
|
||
Add common files for "emk" boards
|
||
|
||
* Add a common get_ram_size() function and modify the the
|
||
board-specific files to invoke that common implementation.
|
||
|
||
======================================================================
|
||
Changes for U-Boot 1.0.1:
|
||
======================================================================
|
||
|
||
* Set default clock for INCA-IP to 150 MHz
|
||
|
||
* Make BMS2003 use a separate config file to avoid #ifdef mess;
|
||
add I2C support; add support for DS1337 RTC
|
||
|
||
* Add CompactFlash support for BMS2003 board
|
||
|
||
* Add support for status LED on BMS2003 board
|
||
|
||
* Patch by Scott McNutt, 02 Jan 2004:
|
||
Add support for the Nios Active Serial Memory Interface (ASMI)
|
||
on Cyclone devices
|
||
|
||
* Patch by Andrea Marson, 16 Dec 2003:
|
||
Add support for the PPChameleon ME and HI modules
|
||
|
||
* Patch by Yuli Barcohen, 22 Dec 2003:
|
||
Add support for Motorola DUET ADS board (MPC87x/88x)
|
||
|
||
* Patch by Robert Schwebel, 15 Dec 2003:
|
||
add support for cramfs (uses JFFS2 command interface)
|
||
|
||
* Patches by Stephan Linz, 11 Dec 2003:
|
||
- more documentation for NIOS port
|
||
- new struct nios_pio_t, struct nios_spi_t
|
||
- Reconfiguration for NIOS Development Kit DK1C20:
|
||
o move board related code from board/dk1c20
|
||
to board/altera/dk1c20
|
||
o create a new common source path board/altera/common
|
||
and move generic flash access stuff into it
|
||
o change/expand configuration file DK1C20.h
|
||
- Add support for NIOS Development Kit DK1S10
|
||
- Add status LED support for NIOS systems
|
||
- Add dual 7-segment LED support for Altera NIOS DevKits
|
||
|
||
* Patch by Ronen Shitrit, 10 Dec 2003:
|
||
Add support for the Marvell DB64360 / DB64460 development boards
|
||
|
||
* Patch by Detlev Zundel, 10 Dec 2003:
|
||
fix dependency problem in examples/Makefile
|
||
|
||
* Patch by Denis Peter, 8 Dec 2003
|
||
- add support for the PATI board (MPC555)
|
||
- add SPI support for the MPC5xx
|
||
|
||
* Patch by Anders Larsen, 08 Dec 2003:
|
||
add configuration options CONFIG_SERIAL_TAG and CONFIG_REVISION_TAG
|
||
to pass ATAG_SERIAL and ATAG_REVISION, resp., to the ARM target;
|
||
cleanup some redundand #defines
|
||
|
||
* Patch by Andr<64> Schwarz, 8 Dec 2003:
|
||
fixes for Davicom DM9102A Ethernet Chip (#define CONFIG_TULIP_FIX_DAVICOM):
|
||
- TX and RX deskriptors must be quad-word aligned
|
||
- does not work with only one TX deskriptor
|
||
- standard reset method does not work
|
||
|
||
* Patch by Masami Komiya, 08 Dec 2003:
|
||
add RTL8139 ethernet driver
|
||
|
||
* Patches by Ed Okerson, 07 Dec 2003:
|
||
- fix ethernet for the AU1x00 processors in little-endian mode.
|
||
- extend memsetup.S for the AU1x00 processors in BE and LE modes
|
||
|
||
* Minor code cleanup (coding style)
|
||
|
||
* Patch by Reinhard Meyer, 30 Dec 2003:
|
||
- cpu/mpc5xxx/fec.c: added CONFIG_PHY_ADDR, added CONFIG_PHY_TYPE,
|
||
- added CONFIG_PHY_ADDR to include/configs/IceCube.h,
|
||
- turned debug print of PHY registers into a function (called in two places)
|
||
- added support for EMK MPC5200 based modules
|
||
|
||
* Fix MPC8xx PLPRCR_MFD_SHIFT typo
|
||
|
||
* Add support for TQM866M modules
|
||
|
||
* Fixes for TQM855M with 4 MB flash (Am29DL163 = _no_ mirror bit flash)
|
||
|
||
* Fix a few compiler warnings
|
||
|
||
* Patch by Reinhard Meyer, 28 Dec 2003:
|
||
Add initial support for TOP5200 board
|
||
|
||
* Make CPU clock on ICA-IP board controllable by a "cpuclk"
|
||
environment variable which can set to "100", "133", or "150". The
|
||
CPU clock will be configured accordingly upon next reboot. Other
|
||
values are ignored. In case of an invalid or undefined "cpuclk"
|
||
value, the compile-time default CPU clock speed will be used.
|
||
|
||
* Enable Quad-UART on BMS2003 board (initialize the PCMCIA memory
|
||
window that is used to access the UART registers by the Linux driver)
|
||
|
||
* Patch by Reinhard Meyer, 20 Dec 2003:
|
||
Fix clock calculation for the MPC5200 for higher clock frequencies
|
||
(above 2**32 / 10 = 429.5 MHz).
|
||
|
||
* Fix CONFIG_PLL_PCI_TO_MEM_MULTIPLIER divider error in SP8240 configuration
|
||
|
||
* Fix IceCube CLKIN configuration (it's 33.000000MHz)
|
||
|
||
* Add new configuration for IceCube board with DDR memory
|
||
|
||
* Update TRAB memory configurations
|
||
|
||
* Add JFFS2 support for INCA-IP board
|
||
|
||
* Patch by Bill Hargen, 09 Dec 2003:
|
||
- BUBINGA405EP: changed flash driver to protect top sector containing
|
||
first instruction.
|
||
- BUBINGA405EP: configured "eeprom" command to access boot config EEPROM.
|
||
- BUBINGA405EP: fixed PLL init (init chip selects before FPGA/NVRAM access).
|
||
- 405EP: fixed SPD-based SDRAM init (only use banks 0 and 1).
|
||
- 405EP: added/fixed support for "reginfo" command.
|
||
- 4xx: removed spurious MII error messages on "mii info" command.
|
||
|
||
* Patch by Bernhard Kuhn, 28 Nov 2003:
|
||
add support for ColdFire CPU
|
||
add support for Motorola M5272C3 and M5282EVB boards
|
||
|
||
* Patch by Pierre Aubert, 24 Nov 2003:
|
||
- add a return value for the fpga command
|
||
- add ide_preinit() function called in ide_init if CONFIG_IDE_PREINIT
|
||
is defined. If ide_preinit fails, ide_init is aborted.
|
||
- fix an endianess problem in fat.h
|
||
|
||
* Patch by Wolter Kamphuis, 05 Dec 2003:
|
||
Add support for SNMC's QS850/QS823/QS860T boards
|
||
|
||
* Patch by Yuli Barcohen, 3 Dec 2003:
|
||
"revive" U-Boot support for old Motorola MPC860ADS board
|
||
|
||
* Patch by Cam(ilo?), 03 Dec 2003:
|
||
make examples build even with broken Montavista objcopy
|
||
|
||
* Patch by Pavel Bartusek, 27 Nov 2003:
|
||
fix conversion problem with "bootretry" evironment variable
|
||
|
||
* Patch by Andre Schwarz, 24 Nov 2003:
|
||
add support for mvblue (mvBlueLYNX and mvBlueBOX) boards
|
||
|
||
* Patch by Pavel Bartusek, 21 Nov 2003:
|
||
set ZMII bridge speed on 440
|
||
|
||
* Patch by Anders Larsen, 17 Nov 2003:
|
||
Fix mismatched #ifdef / #endif in include/asm-arm/arch-pxa/hardware.h
|
||
|
||
* Patches by David M<>ller, 14 Nov 2003:
|
||
- board/mpl/common/common_util.c
|
||
* implement support for BZIP2 compressed images
|
||
* various cleanups (printf -> puts, ...)
|
||
- board/mpl/common/flash.c
|
||
* report correct errors to upper layers
|
||
* check the erase fail and VPP low bits in status reg
|
||
- board/mpl/vcma9/cmd_vcma9.c
|
||
- board/mpl/vcma9/flash.c
|
||
* various cleanups (printf -> puts, ...)
|
||
- common/cmd_usb.c
|
||
* fix typo in comment
|
||
- cpu/arm920t/usb_ohci.c
|
||
* support for S3C2410 is missing in #if line
|
||
- drivers/cs8900.c
|
||
* reinit some registers in case of error (cable missing, ...)
|
||
- fs/fat/fat.c
|
||
* support for USB/MMC devices is missing in #if line
|
||
- include/configs/MIP405.h
|
||
- include/configs/PIP405.h
|
||
* enable BZIP2 support
|
||
* enlarge malloc space to 1MiB because of BZIP2 support
|
||
- include/configs/VCMA9.h
|
||
* enable BZIP2 support
|
||
* enlarge malloc space to 1MiB because of BZIP2 support
|
||
* enable USB support
|
||
- lib_arm/armlinux.c
|
||
* change calling convention of ARM Linux kernel as
|
||
described on http://www.arm.linux.org.uk/developer/booting.php
|
||
|
||
* Patch by Thomas Lange, 14 Nov 2003:
|
||
Split dbau1x00 into dbau1000, dbau1100 and dbau1500 configs to
|
||
support all these AMD boards.
|
||
|
||
* Patch by Thomas Lange, 14 Nov 2003:
|
||
Workaround for mips au1x00 physical memory accesses (the au1x00
|
||
uses a 36 bit bus internally and cannot access physical memory
|
||
directly. Use the uncached SDRAM address instead of the physical
|
||
one.)
|
||
|
||
* Patch by Xue Ligong (Joe), 13 Nov 2003:
|
||
add Realtek 8019 ethernet driver
|
||
|
||
* Patch by Yuli Barcohen, 13 Nov 2003:
|
||
MPC826xADS/PQ2FADS cleanup
|
||
|
||
* Patch by Anders Larsen, 12 Nov 2003:
|
||
Update README to mark the PORTIO commands non-standard
|
||
|
||
* Patch by Nicolas Lacressonni<6E>re, 12 Nov 2003:
|
||
update for for Atmel AT91RM9200DK development kit:
|
||
- support for environment variables in DataFlash
|
||
- Atmel DataFlash AT45DB1282 support
|
||
|
||
* Patch by Jeff Carr, 11 Nov 2003:
|
||
add support for new version of 8270 processors
|
||
|
||
* Patches by George G. Davis, 05 Nov 2003:
|
||
- only pass the ARM linux initrd tag to the kernel when an initrd
|
||
is actually present
|
||
- update omap1510inn configuration file
|
||
|
||
* Patches by Stephan Linz, 3 Nov 2003:
|
||
- more endianess fixes for LAN91C111 driver
|
||
- CFG_HZ configuration patch for NIOS Cyclone board
|
||
|
||
* Patch by Stephan Linz, 28 Oct 2003:
|
||
fix PHY_INT_REG vs. PHY_MASK_REG bug in drivers/smc91111.c
|
||
|
||
* Patch by Steven Scholz, 20 Oct 2003:
|
||
- make "mii info <addr>" show infor for PHY at "addr" only
|
||
- Endian fix for miiphy_info()
|
||
|
||
* Patch by Gleb Natapov, 19 Sep 2003:
|
||
Move most of the timer interrupt related PPC code to ppc_lib/interrupts.c
|
||
|
||
* Patch by Anders Larsen, 17 Sep 2003:
|
||
Bring ARM memory layout in sync with the documentation:
|
||
stack and malloc-heap are now located _below_ the U-Boot code
|
||
|
||
* Accelerate booting on TRAB board: read and check autoupdate image
|
||
headers first instead of always reading the whole images.
|
||
|
||
* Fix type in MPC5XXX code (pointed out by Victor Wren)
|
||
|
||
* Enabled password check on RMU board
|
||
|
||
* Fix configuration problem with IceCube in LOWBOOT configuration:
|
||
envrionment got embedded, corrupting the image layout.
|
||
|
||
* Fix NEC display names (it's 6440 [for 640x480], not 6640).
|
||
|
||
* Added BMS2003 board
|
||
add support for NEC NL6448BC33-54. 10.4", 640x480 TFT display
|
||
|
||
* Fix flash driver for TRAB board (must use Unlock Bypass Reset
|
||
command to exit Unlock Bypass Mode); adjust timings for flash, SRAM
|
||
and CPLD
|
||
|
||
* Use "-fPIC" instead of "-mrelocatable" to prevent problems with
|
||
recent tools
|
||
|
||
* Add checksum verification to 'imls' command
|
||
|
||
* Add bd_info fields needed for 4xx Linux I2C driver
|
||
|
||
* Patch by Martin Krause, 4 Nov. 2003:
|
||
Fix error in cmd_vfd.c (TRAB board: "vfd /1" shows now only one Bitmap)
|
||
|
||
* Print used network interface when CONFIG_NET_MULTI is set
|
||
|
||
* Patch by Bernhard Kuhn, 28 Oct 2003:
|
||
Add low boot support for MPC5200
|
||
|
||
* Fix problem with dual PCMCIA support (NSCU)
|
||
|
||
* Fix MPC5200 I2C initialization function
|
||
|
||
======================================================================
|
||
Changes for U-Boot 1.0.0:
|
||
======================================================================
|
||
|
||
* Fix parameter passing to standalone images with bootm command
|
||
|
||
* Patch by Kyle Harris, 30 Oct 2003:
|
||
Fix build errors for ixdp425 board
|
||
|
||
* Patch by David M. Horn, 29 Oct 2003:
|
||
Fixes to build under CYGWIN
|
||
|
||
* Get IceCube MGT5100 working (again)
|
||
|
||
* Fix problems in memory test on some boards (which was not
|
||
non-destructive as intended)
|
||
|
||
* Patch by Gary Jennejohn, 28 Oct 2003:
|
||
Change fs/fat/fat.c to put I/O buffers in BSS instead on the stack
|
||
to prevent stack overflow on ARM systems
|
||
|
||
* Patch by Stephan Linz, 28 Oct 2003:
|
||
fix init sequence error for NIOS port
|
||
|
||
* Allow lowercase spelling for IceCube_5200; support MPC5200LITE name
|
||
|
||
* Add CONFIG_VERSION_VARIABLE to TRAB configuration
|
||
|
||
* Patch by Xiao Xianghua, 23 Oct 2003:
|
||
small patch for mpc85xx
|
||
|
||
* Fix small problem in MPC5200 I2C driver
|
||
|
||
* Fix FCC3 support on ATC board
|
||
|
||
* Correct header printing for multi-image files in do_bootm()
|
||
|
||
* Make CONFIG_SILENT_CONSOLE work with CONFIG_AUTOBOOT_KEYED
|
||
|
||
* Fix PCI problems on PPChameleon board
|
||
|
||
* Patch by Steven Scholz, 18 Oct 2003:
|
||
Fix AT91RM9200 ethernet driver
|
||
|
||
* Patch by Nye Liu, 17 Oct 2003:
|
||
Fix typo in include/mpc8xx.h
|
||
|
||
* Patch by Richard Woodruff, 16 Oct 03:
|
||
Fixes for cpu/arm925/interrupt.c
|
||
- Initialize timestamp & lastdec vars.
|
||
- fix timestamp overflows.
|
||
- fix lastdec overflow.
|
||
- smarter normalization to allow udelay() below 1ms to work.
|
||
|
||
* Patch by Scott McNutt, 16 Oct
|
||
add networking support for the Altera Nios Development Kit,
|
||
Cyclone Edition (DK-1C20)
|
||
|
||
* Patch by Jon Diekema, 14 Oct 2003:
|
||
add hint about doc/README.silent to README file
|
||
|
||
* Add CompactFlash support for NSCU
|
||
|
||
* Fix PCI problems on PPChameleonEVB
|
||
|
||
* TRAB auto-update: Base decision if we have to strip the image
|
||
header on image type as encoded in the header
|
||
(include image type patch by Martin Krause, 17 Oct 2003)
|
||
|
||
* Patches by Xianghua Xiao, 15 Oct 2003:
|
||
|
||
- Added Motorola CPU 8540/8560 support (cpu/85xx)
|
||
- Added Motorola MPC8540ADS board support (board/mpc8540ads)
|
||
- Added Motorola MPC8560ADS board support (board/mpc8560ads)
|
||
|
||
* Fix flash timings on TRAB board
|
||
|
||
* Make sure HUSH is initialized for running auto-update scripts
|
||
|
||
* Make 5200 reset command _really_ reset the board, without running
|
||
any other code after it
|
||
|
||
* Fix errors with flash erase when range spans across banks
|
||
that are mapped in reverse order
|
||
|
||
* Fix flash mapping and display on P3G4 board
|
||
|
||
* Patch by Kyle Harris, 15 Jul 2003:
|
||
- add support for Intel IXP425 CPU
|
||
- add support for IXDP425 eval board
|
||
|
||
* Added config option CONFIG_SILENT_CONSOLE. See doc/README.silent
|
||
for more information
|
||
|
||
* Patch by Steven Scholz, 10 Oct 2003
|
||
- Add support for Altera FPGA ACEX1K
|
||
|
||
* Patches by Thomas Lange, 09 Oct 2003:
|
||
- fix cmd_ide.c for non ppc boards (read/write functions did not
|
||
add ATA base address)
|
||
- fix for shannon board
|
||
- #ifdef CONFIG_IDE_8xx_DIRECT some otherwise unused code
|
||
- Endian swap ATA identity for all big endian CPUs, not just PPC
|
||
- MIPS only: New option CONFIG_MEMSIZE_IN_BYTES for passing memsize
|
||
args to linux
|
||
- add support for dbau1x00 board (MIPS32)
|
||
|
||
* Patch by Sangmoon Kim, 07 Oct 2003:
|
||
add support for debris board
|
||
|
||
* Patch by Martin Krause, 09 Oct 2003:
|
||
Fixes for TRAB board
|
||
- /board/trab/rs485.c: correct baudrate
|
||
- /board/trab/cmd_trab.c: bug fix for problem with timer overflow in
|
||
udelay(); fix some timing problems with adc controller
|
||
- /board/trab/trab_fkt.c: add new commands: gain, eeprom and power;
|
||
modify commands: touch and buzzer
|
||
|
||
* Disable CONFIG_SUPPORT_VFAT when used with CONFIG_AUTO_UPDATE
|
||
(quick & dirty workaround for rogue pointer problem in get_vfatname());
|
||
Use direct function calls for auto_update instead of hush commands
|
||
|
||
* Patch by Scott McNutt, 04 Oct 2003:
|
||
- add support for Altera Nios-32 CPU
|
||
- add support for Nios Cyclone Development Kit (DK-1C20)
|
||
|
||
* Patch by Steven Scholz, 29 Sep 2003:
|
||
- A second parameter for bootm overwrites the load address for
|
||
"Standalone Application" images.
|
||
- bootm sets environment variable "filesize" to the resulting
|
||
(uncompressed) data length for "Standalone Application" images
|
||
when autostart is set to "no". Now you can do something like
|
||
if bootm $fpgadata $some_free_ram ; then
|
||
fpga load 0 $some_free_ram $filesize
|
||
fi
|
||
|
||
* Patch by Denis Peter, 25 Sept 2003:
|
||
add support for the MIP405 Rev. C board
|
||
|
||
* Patch by Yuli Barcohen, 25 Sep 2003:
|
||
add support for Zephyr Engineering ZPC.1900 board
|
||
|
||
* Patch by Anders Larsen, 23 Sep 2003:
|
||
add CMD_PORTIO to CFG_CMD_NONSTD (commands in question are only
|
||
implemented for the x86 architecture)
|
||
|
||
* Patch by Sangmoon Kim, 23 Sep 2003:
|
||
fix pll_pci_to_mem_multiplier table for MPC8245
|
||
|
||
* Patch by Anders Larsen, 22 Sep 2003:
|
||
enable timed autoboot on PXA
|
||
|
||
* Patch by David M<>ller, 22 Sep 2003:
|
||
- add $(CFLAGS) to "-print-libgcc-filename" so compiler driver
|
||
returns correct libgcc file path
|
||
- "latency" reduction of busy-loop waiting to improve "U-Boot" boot
|
||
time on s3c24x0 systems
|
||
|
||
* Patch by Jon Diekema, 19 Sep 2003:
|
||
- Add CFG_FAULT_ECHO_LINK_DOWN option to echo the inverted Ethernet
|
||
link state to the fault LED.
|
||
- In NetLoop, make the Fault LED reflect the link status. The link
|
||
status gets updated on entry, and on timeouts.
|
||
|
||
* Patch by Anders Larsen, 18 Sep 2003:
|
||
allow mkimage to build and run on Cygwin-hosted systems
|
||
|
||
* Patch by Frank M<>ller, 18 Sep 2003:
|
||
use bi_intfreq instead of bi_busfreq to compute fec_mii_speed in
|
||
cpu/mpc8xx/fec.c
|
||
|
||
* Patch by Pantelis Antoniou, 16 Sep 2003:
|
||
add tool to compute fileds in the PLPRCR register for MPC86x
|
||
|
||
* Use IH_TYPE_FILESYSTEM for TRAB "disk" images.
|
||
|
||
* Fix build problems under FreeBSD
|
||
|
||
* Add generic filesystem image type
|
||
|
||
* Make fatload set filesize environment variable
|
||
|
||
* enable basic / medium / high-end configurations for PPChameleonEVB
|
||
board; fix NAND code
|
||
|
||
* enable TFTP client code to specify to the server the desired
|
||
timeout value (see RFC-2349)
|
||
|
||
* Improve SDRAM setup for TRAB board
|
||
|
||
* Suppress all output with splashscreen configured only if "splashimage"
|
||
is set
|
||
|
||
* Fix problems with I2C support for mpc5200
|
||
|
||
* Adapt TRAB configuration and auto_update to new memory layout
|
||
|
||
* Add configuration for wtk board
|
||
|
||
* Add support for the Sharp LQ065T9DR51U LCD display
|
||
|
||
* Patch by Rune Torgersen, 17 Sep 2003:
|
||
- Fixes for MPC8266 default config
|
||
- Allow eth_loopback_test() on 8260 to use a subset of the FCC's
|
||
|
||
* Patches by Jon Diekema, 17 Sep 2003:
|
||
- update README (SHOW_BOOT_PROGRESS values for cmd_nand.c and
|
||
env_common.c)
|
||
- sbc8260 tweaks
|
||
- adjust "help" output
|
||
|
||
* Patches by Anders Larsen, 17 Sep 2003:
|
||
- fix spelling errors
|
||
- set GD_FLG_DEVINIT flag only after device function pointers
|
||
are valid
|
||
- Allow CFG_ALT_MEMTEST on systems where address zero isn't
|
||
writeable
|
||
- enable 3.rd UART (ST-UART) on PXA(XScale) CPUs
|
||
- trigger watchdog while waiting in serial driver
|
||
|
||
* Add auto-update code for TRAB board using USB memory sticks,
|
||
support new configuration with more memory
|
||
|
||
* disable MPC5200 bus pipelining as workaround for bus contention
|
||
|
||
* Modify XLB arbiter priorities on MPC5200 so all devices use same
|
||
priority; configure critical interrupts to be handled like external
|
||
interrupts
|
||
|
||
* Make IPB clock on MGT5100/MPC5200 configurable in board config file;
|
||
go back to 66 MHz for stability
|
||
|
||
* Patches by Jon Diekema, 15 Sep 2003:
|
||
- add description for missing CFG_CMD_* entries in the README file
|
||
- sacsng tweaks
|
||
|
||
* Patch by Gleb Natapov, 14 Sep 2003:
|
||
enable watchdog support for all MPC824x boards that have a watchdog
|
||
|
||
* On MPC5200, restrict FEC to a maximum of 10 Mbps to work around the
|
||
"Non-octet Aligned Frame" errors we see at 100 Mbps
|
||
|
||
* Patch by Sharad Gupta, 14 Sep 2003:
|
||
fix SPR numbers for upper BAT register ([ID]BAT[4-7][UL])
|
||
|
||
* Patch by llandre, 11 Sep 2003:
|
||
update configuration for PPChameleonEVB board
|
||
|
||
* Patch by David M<>ller, 13 Sep 2003:
|
||
various changes to VCMA9 board specific files
|
||
|
||
* Add I2C support for MGT5100 / MPC5200
|
||
|
||
* Patch by Rune Torgersen, 11 Sep 2003:
|
||
Changed default memory option on MPC8266ADS to NOT be Page Based
|
||
Interleave, since this doesn't work very well with the standard
|
||
16MB DIMM
|
||
|
||
* Patch by George G. Davis, 12 Sep 2003:
|
||
fix Makefile settings for sk98 driver
|
||
|
||
* Patch by Stefan Roese, 12 Sep 2003:
|
||
- new boards added: DP405, HUB405, PLU405, VOH405
|
||
- some esd boards updated
|
||
- cpu/ppc4xx/sdram.c: disable memory controller before setting
|
||
first values
|
||
- cpu/ppc4xx/405_pci.c: set vendor id on PPC405EP systems
|
||
|
||
* Patch by Martin Krause, 11 Sep 2003:
|
||
add burn-in tests for TRAB board
|
||
|
||
* Enable instruction cache on MPC5200 board
|
||
|
||
* Patch by Denis Peter, 11 Sep 2003:
|
||
- fix USB data pointer assignment for bulk only transfer.
|
||
- prevent to display erased directories in FAT filesystem.
|
||
|
||
* Change output format for NAND flash - make it look like for other
|
||
memory, too
|
||
|
||
======================================================================
|
||
Changes for U-Boot 0.4.8:
|
||
======================================================================
|
||
|
||
* Add I2C and RTC support for RMU board
|
||
|
||
* Patches by Denis Peter, 9 Sep 2003:
|
||
add FAT support for IDE, SCSI and USB
|
||
|
||
* Patches by Gleb Natapov, 2 Sep 2003:
|
||
- cleanup of POST code for unsupported architectures
|
||
- MPC824x locks way0 of data cache for use as initial RAM;
|
||
this patch unlocks it after relocation to RAM and invalidates
|
||
the locked entries.
|
||
|
||
* Patch by Gleb Natapov, 30 Aug 2003:
|
||
new I2C driver for mpc107 bridge. Now works from flash.
|
||
|
||
* Patch by Dave Ellis, 11 Aug 2003:
|
||
- JFFS2: fix typo in common/cmd_jffs2.c
|
||
- JFFS2: fix CFG_JFFS2_SORT_FRAGMENTS option
|
||
- JFFS2: remove node version 0 warning
|
||
- JFFS2: accept JFFS2 PADDING nodes
|
||
- SXNI855T: add AM29LV800 support
|
||
- SXNI855T: move environment from EEPROM to flash
|
||
- SXNI855T: boot from JFFS2 in NOR or NAND flash
|
||
|
||
* Patch by Bill Hargen, 11 Aug 2003:
|
||
fixes for I2C on MPC8240
|
||
- fix i2c_write routine
|
||
- fix iprobe command
|
||
- eliminates use of global variables, plus dead code, cleanup.
|
||
|
||
* Add support for USB Mass Storage Devices (BBB)
|
||
(tested with USB memory sticks only)
|
||
|
||
* Avoid flicker on TRAB's VFD
|
||
|
||
* Add support for SK98xx driver
|
||
|
||
* Add PCI support for SL8245 board
|
||
|
||
* Support IceCube board configurations with 1 x AMD AM29LV065 (8 MB)
|
||
or 1 x AM29LV652 (two LV065 in one chip = 16 MB);
|
||
Run IPB at 133 Mhz; adjust the MII clock frequency accordingly
|
||
|
||
* Set BRG_CLK on PM825/826 to 64MHz (VCO_OUT / 4, instead of 16 MHz)
|
||
to allow for more accurate baudrate settings
|
||
(error now 0.7% at 115 kbps, instead of 3.5% before)
|
||
|
||
* Patch by Andreas Mohr, 4 Sep 2003:
|
||
Fix a lot of spelling errors
|
||
|
||
* Add support for PPChameleon Eval Board
|
||
|
||
* Add support for P3G4 board
|
||
|
||
* Fix problem with MGT5100 FEC driver: add "early" MAC address
|
||
initialization
|
||
|
||
* Patch by Yuli Barcohen, 7 Aug 2003:
|
||
check BCSR to detect if the board is configured in PCI mode
|
||
|
||
======================================================================
|
||
Changes for U-Boot 0.4.7:
|
||
======================================================================
|
||
|
||
* Patch by Raghu Krishnaprasad, 7 Aug 2003:
|
||
add support for Adder II MPC852T module
|
||
|
||
* Patch by George G. Davis, 19 Aug 2003:
|
||
fix TI Innovator/OMAP1510 pin configs
|
||
|
||
* Patches by Kshitij, 18 Aug 2003
|
||
- add support for arm926ejs cpu core
|
||
- add support for TI OMAP 1610 Innovator Board
|
||
|
||
* Patch by Yuli Barcohen, 14 Aug 2003:
|
||
add support for bzip2 uncompression
|
||
|
||
* Add GCC library to examples/Makefile so GCC utility functions will
|
||
be resolved, too
|
||
|
||
* Add I2C and RTC support for RMU board using software I2C driver
|
||
(because of better response to iprobe command); fix problem with
|
||
"reset" command
|
||
|
||
* Patch by Matthias Fuchs, 28 Aug 2003:
|
||
Added CONFIG_BOOTP_DNS2 and CONFIG_BOOTP_SEND_HOSTNAME to
|
||
CONFIG_BOOTP_MAKS (see README).
|
||
|
||
* Fix ICU862 environment problem
|
||
|
||
* Fix RAM size detection for RMU board
|
||
|
||
* Implement "reset" for MGT5100/MPC5200 systems
|
||
|
||
======================================================================
|
||
Changes for U-Boot 0.4.6:
|
||
======================================================================
|
||
|
||
* Make Ethernet autonegotiation on INCA-IP work for all clock rates;
|
||
allow selection of clock frequency as "make" target
|
||
|
||
* Implement memory autosizing code for IceCube boards
|
||
|
||
* Configure network port on INCA-IP for autonegotiation
|
||
|
||
* Fix overflow problem in network timeout code
|
||
|
||
* Patch by Richard Woodruff, 8 Aug 2003:
|
||
Allow crc32 to be used at address 0x000 (crc32_no_comp, too).
|
||
|
||
======================================================================
|
||
Changes for U-Boot 0.4.5:
|
||
======================================================================
|
||
|
||
* Update for TQM board defaults:
|
||
disable clocks_in_mhz, enable boot count limit
|
||
|
||
* Removed tools/gdb from "make all" target. Added make target "gdbtools"
|
||
in toplevel directory instead. Removed astest.c from tools/gdb because
|
||
it is no longer relevant.
|
||
|
||
* Fix PCI support for MPC5200 / IceCube Board
|
||
|
||
* Map ISP1362 USB OTG controller for NSCU board
|
||
|
||
* Patch by Brad Parker, 02 Aug 2003:
|
||
fix sc520_cdp problems
|
||
|
||
* Implement Boot Cycle Detection (Req. 2.3 of OSDL CGL Reqirements)
|
||
|
||
* Allow erase command to cross flash bank boundaries
|
||
|
||
* Patch by Scott McNutt, 21 Jul 2003:
|
||
Add support for LynuxWorks Kernel Downloadable Images (KDIs).
|
||
Both LynxOS and BlueCat linux KDIs are supported.
|
||
|
||
* Patch by Richard Woodruff, 25 Jul 2003:
|
||
use more reliable reset for OMAP/925T
|
||
|
||
* Patch by Nye Liu, 25 Jul 2003:
|
||
fix typo in mpc8xx.h
|
||
|
||
* Patch by Richard Woodruff, 24 Jul 2003:
|
||
Fixes for cmd_nand.c:
|
||
- Fixed null dereferece which could result in incorrect ECC values.
|
||
- Added support for devices with no Ready/Busy signal hooked up.
|
||
- Added OMAP1510 read/write protect handling.
|
||
- Fixed nand.h's ECCPOS. A conflict existed with POS5 and badblock
|
||
for non-JFFS2.
|
||
- Switched default ECC to be JFFS2.
|
||
|
||
* Allow crc32 to be used at address 0x000
|
||
|
||
* Provide consistent interface to standalone applications to access
|
||
the 'global_data' structure
|
||
Provide a doc/README.standalone more useful to users/developers.
|
||
|
||
* Make IceCube MGT5100 FEC driver work
|
||
|
||
* Implement new mechanism to export U-Boot's functions to standalone
|
||
applications: instead of using (PPC-specific) system calls we now
|
||
use a jump table; please see doc/README.standalone for details
|
||
|
||
* Patch by Dave Westwood, 24 Jul 2003:
|
||
added support for Unity OS (a proprietary OS)
|
||
|
||
* Patch by Detlev Zundel, 23 Jul 2003:
|
||
add "imls" command to print flash table of contents
|
||
|
||
* Fix cold boot detection for log buffer reset
|
||
|
||
* Return error for invalid length specifiers with "cp.X" etc.
|
||
|
||
* Fix startup problem on MIPS
|
||
|
||
* Allow for CONFIG_SPLASH_SCREEN even when no explicit
|
||
bitmap support is configured
|
||
|
||
* Patch by Bill Hargen, 18 Jul 2003:
|
||
- fix endinaness problem in cpu/mpc824x/drivers/i2c/i2c1.c
|
||
|
||
* Patch by Denis Peter, 18 Jul 2003:
|
||
- fix memory configuration for MIP405T
|
||
- fix printout of baudrate for "loadb <loadaddr> <baudrate>"
|
||
|
||
* Cleanup of TQM82xx configurations; use "official" board types
|
||
to make selection easier.
|
||
|
||
* Patch by Martin Krause, 17 Jul 2003:
|
||
add delay to get I2C working with "imm" command and s3c24x0_i2c.c
|
||
|
||
* Patch by Richard Woodruff, 17 July 03:
|
||
- Fixed bug in OMAP1510 baud rate divisor settings.
|
||
|
||
* Patch by Nye Liu, 16 July 2003:
|
||
MPC860FADS fixes:
|
||
- add MPC86xADS support (uses MPC86xADS.h)
|
||
- add 866P/T core support (also MPC859T/MPC859DSL/MPC852T)
|
||
o PLPRCR changes
|
||
o BRG changes (EXTAL/XTAL restricted to 10MHz)
|
||
o don't trust gclk() software measurement by default, depend on
|
||
CONFIG_8xx_GCLK_FREQ
|
||
- add DRAM SIMM not installed detection
|
||
- use more "correct" SDRAM initialization sequence
|
||
- allow different SDRAM sizes (8xxADS has 8M)
|
||
- default DER is 0
|
||
- remove unused MAMR defines from FADS860T.h (all done in fads.c)
|
||
- rename MAMR/MBMR defines to be more consistent. Should eventually
|
||
be merged into MxMR to better reflect the PowerQUICC datasheet.
|
||
|
||
* Patch by Yuli Barcohen, 16 Jul 2003:
|
||
support new Motorola PQ2FADS-ZU evaluation board which replaced
|
||
MPC8260ADS and MPC8266ADS
|
||
|
||
======================================================================
|
||
Changes for U-Boot 0.4.4:
|
||
======================================================================
|
||
|
||
* Add support for IceCube board (with MGT5100 and MPC5200 CPUs)
|
||
|
||
* Add support for MGT5100 and MPC5200 processors
|
||
|
||
* Patch by Lutz Dennig, 15 Jul 2003:
|
||
update for R360MPI board
|
||
|
||
======================================================================
|
||
Changes for U-Boot 0.4.3:
|
||
======================================================================
|
||
|
||
* Patches by Kshitij, 04 Jul 2003
|
||
- added support for arm925t cpu core
|
||
- added support for TI OMAP 1510 Innovator Board
|
||
|
||
* Patches by Martin Krause, 14 Jul 2003:
|
||
- add I2C support for s3c2400 systems (trab board)
|
||
- (re-) add "ping" to command table
|
||
|
||
* Fix handling of "slow" POST routines
|
||
|
||
* Patches by Yuli Barcohen, 13 Jul 2003:
|
||
- Correct flash and JFFS2 support for MPC8260ADS
|
||
- fix PVR values and clock generation for PowerQUICC II family
|
||
(8270/8275/8280)
|
||
|
||
* Patch by Bernhard Kuhn, 08 Jul 2003:
|
||
- add support for M68K targets
|
||
|
||
* Patch by Ken Chou, 3 Jul:
|
||
- Fix PCI config table for A3000
|
||
- Fix iobase for natsemi.c
|
||
(PCI_BASE_ADDRESS_0 is the IO base register for DP83815)
|
||
|
||
* Allow to enable "slow" POST routines by key press on power-on
|
||
* Fix temperature dependend switching of LCD backlight on LWMON
|
||
* Tweak output format for LWMON
|
||
|
||
* Patch by Stefan Roese, 11 Jul 2003:
|
||
- Fix bug in CONFIG_VERSION_VARIABLE.
|
||
- AR405 config updated.
|
||
- OCRTC/ORSG: bsp command added.
|
||
- ASH405 bsp update.
|
||
|
||
======================================================================
|
||
Changes for U-Boot 0.4.2:
|
||
======================================================================
|
||
|
||
* Add support for NSCU board
|
||
|
||
* Add support for TQM823M, TQM850M, TQM855M and TQM860M modules
|
||
|
||
* Add support for Am29LV160ML, Am29LV320ML, and Am29LV640ML
|
||
mirror bit flash on TQM8xxM modules
|
||
|
||
* Patch by Kenneth Johansson, 30 Jun 2003:
|
||
get rid of MK_CMD_ENTRY macro; update doc/README.command
|
||
|
||
* Patch by Seb James, 30 Jun 2003:
|
||
Improve documentation of I2C configuration in README
|
||
|
||
* Fix problems with previous log buffer "fixes"
|
||
|
||
* Fix minor help text issues
|
||
|
||
* "log append" did not append a newline
|
||
|
||
======================================================================
|
||
Changes for U-Boot 0.4.1:
|
||
======================================================================
|
||
|
||
* Fix some missing commands, cleanup header files
|
||
(autoscript, bmp, bsp, fat, mmc, nand, portio, ...)
|
||
|
||
* Rewrite command lookup and help command (fix problems with bubble
|
||
sort when sorting command name list). Minor cleanup here and there.
|
||
|
||
* Merge from "stable branch", tag LABEL_2003_06_28_1800-stable:
|
||
- Allow to call sysmon function interactively
|
||
- PIC on LWMON board needs delay after power-on
|
||
- Add missing RSR definitions for MPC8xx
|
||
- Improve log buffer handling: guarantee clean reset after power-on
|
||
- Add support for EXBITGEN board (aka "genie")
|
||
- Add support for SL8245 board
|
||
|
||
* Code cleanup:
|
||
- remove trailing white space, trailing empty lines, C++ comments, etc.
|
||
- split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c)
|
||
|
||
* Patches by Kenneth Johansson, 25 Jun 2003:
|
||
- major rework of command structure
|
||
(work done mostly by Michal Cendrowski and Joakim Kristiansen)
|
||
|
||
======================================================================
|
||
Changes for U-Boot 0.4.0:
|
||
======================================================================
|
||
|
||
* Patches by Robert Schwebel, 26 Jun 2003:
|
||
- csb226 configuration updated
|
||
- credits for logodl port updated
|
||
- innokom configuration updated
|
||
- logodl tree update, still with coding style inconsistencies
|
||
- added OCM for ppc405 warning to README
|
||
|
||
* Patch by Pantelis Antoniou, 25 Jun 2003:
|
||
update NetVia with V2 board support
|
||
|
||
* Header file cleanup for ARM
|
||
|
||
* Patch by Murray Jensen, 24 Jun 2003:
|
||
- make sure to use only U-boot provided header files
|
||
- fix problems with ".rodata.str1.4" section as used by GCC-3.x
|
||
|
||
* Patch by Stefan Roese, 24 Jun 2003:
|
||
- Update esd ASH405 board files.
|
||
- Update esd DASA_SIM config file.
|
||
- Add ping command to some esd boards.
|
||
|
||
* Patch by Yuli Barcohen, 23 Jun 2003:
|
||
Update for MPC8260ADS board
|
||
|
||
* Patch by Murray Jensen, 23 Jun 2003:
|
||
- cleanup of GCC 3.x compiler warnings
|
||
|
||
* Patch by Rune Torgersen, 4 Jun 2003:
|
||
add large memory support for MPC8266ADS board
|
||
|
||
* Patch by Richard Woodruff, 19 June 03:
|
||
- Enabled standard u-boot device abstraction for ARM
|
||
- Enabled console device for ARM
|
||
- Initilized bi_baudrate for ARM
|
||
|
||
* Patch by Bill Hargen, 23 Apr 2003:
|
||
fix byte order for 824x I2C addresses (write op)
|
||
|
||
* Patch by Murray Jensen, 20 Jun 2003:
|
||
- hymod update
|
||
- cleanup (especially for gcc-3.x compilers)
|
||
|
||
* Patch by Tom Guilliams, 20 Jun 2003:
|
||
added CONFIG_750FX support for IBM 750FX processors
|
||
|
||
* Patch by Devin Crumb, 02 Apr 2003:
|
||
Fix clock divider rounding problem in drivers/serial.c
|
||
|
||
* Patch by Richard Woodruff, 19 June 03:
|
||
- Fixed smc91c111 driver to sync with the u-boot environment
|
||
(driver/smc91c111.c).
|
||
- Added eth_init error return check in NetLoop (net/net.c).
|
||
|
||
* Patch by Ken Chou, 19 June 2003:
|
||
Added support for A3000 SBC board (Artis Microsystems Inc.)
|
||
|
||
* Patches by Murray Jensen, 17 Jun 2003:
|
||
- Hymod board database mods: add "who" field and new xilinx chip types
|
||
- provide new "init_cmd_timeout()" function so code external to
|
||
"common/main.c" can use the "reset_cmd_timeout()" function before
|
||
entering the main loop
|
||
- add DTT support for adm1021 (new file dtt/adm1021.c; config
|
||
slightly different. see include/configs/hymod.h for an example
|
||
(requires CONFIG_DTT_ADM1021, CONFIG_DTT_SENSORS, and
|
||
CFG_DTT_ADM1021 defined)
|
||
- add new "eeprom_probe()" function which has similar args and
|
||
behaves in a similar way to "eeprom_read()" etc.
|
||
- add 8260 FCC ethernet loopback code (new "eth_loopback_test()"
|
||
function which is enabled by defining CONFIG_ETHER_LOOPBACK_TEST)
|
||
- gdbtools copyright update
|
||
- ensure that set_msr() executes the "sync" and "isync" instructions
|
||
after the "mtmsr" instruction in cpu/mpc8260/interrupts.c
|
||
- 8260 I/O ports fix: Open Drain should be set last when configuring
|
||
- add SIU IRQ defines for 8260
|
||
- allow LDSCRIPT override and OBJCFLAGS initialization: change to
|
||
config.mk to allow board configurations to override the GNU
|
||
linker script, selected via the LDSCRIPT, make variable, and to
|
||
give an initial value to the OBJCFLAGS make variable
|
||
- 8260 i2c enhancement:
|
||
o correctly extends the timeout depending on the size of all
|
||
queued messages for both transmit and receive
|
||
o will not continue with receive if transmit times out
|
||
o ensures that the error callback is done for all queued tx
|
||
and rx messages
|
||
o correctly detects both tx and rx timeouts, only delivers one to
|
||
the callback, and does not overwrite an earlier error
|
||
o logic in i2c_probe now correct
|
||
- add "vprintf()" function so that "panic()" function can be
|
||
technically correct
|
||
- many Hymod board changes
|
||
|
||
* Patches by Robert Schwebel, 14 Jun 2003:
|
||
- add support for Logotronic DL datalogger board
|
||
- cleanup serial line after kermit binary download
|
||
- add debugX macro (debug level support)
|
||
- update mach-types.h to latest arm.linux.org.uk master list.
|
||
|
||
* Patches by David M<>ller, 12 Jun 2003:
|
||
- rewrite of the S3C24X0 register definitions stuff
|
||
- "driver" for the built-in S3C24X0 RTC
|
||
|
||
* Patches by Yuli Barcohen, 12 Jun 2003:
|
||
- Add MII support and Ethernet PHY initialization for MPC8260ADS board
|
||
- Fix incorrect SIUMCR initialisation caused by wrong Hard Reset
|
||
configuration word supplied by FPGA on some MPC8260ADS boards
|
||
|
||
* Patch by Pantelis Antoniou, 10 Jun 2003:
|
||
Unify status LED interface
|
||
|
||
* Add support for DS12887 RTC; add RTC support for ATC board
|
||
|
||
* Patch by Nicolas Lacressonniere, 11 Jun 2003:
|
||
Modifications for Atmel AT91RM9200DK ARM920T based development kit
|
||
- Add Atmel DataFlash support for reading and writing.
|
||
- Add possibility to boot a Linux from DataFlash with BOOTM command.
|
||
- Add Flash detection on Atmel AT91RM9200DK
|
||
(between Atmel AT49BV1614 and AT49BV1614A flashes)
|
||
- Replace old Ethernet PHY layer functions
|
||
- Change link address
|
||
|
||
* Patch by Frank Smith, 9 Jun 2003:
|
||
use CRIT_EXCEPTION for machine check on 4xx
|
||
|
||
* Patch by Detlev Zundel, 13 Jun 2003:
|
||
added implementation of the "carinfo" command in cmd_immap.c
|
||
|
||
* Fix CONFIG_NET_MULTI support in include/net.h
|
||
|
||
* Patches by Kyle Harris, 13 Mar 2003:
|
||
- Add FAT partition support
|
||
- Add command support for FAT
|
||
- Add command support for MMC
|
||
----
|
||
- Add Intel PXA support for video
|
||
- Add Intel PXA support for MMC
|
||
----
|
||
- Enable MMC and FAT for lubbock board
|
||
- Other misc changes for lubbock board
|
||
|
||
* Patch by Robert Schwebel, April 02, 2003:
|
||
fix for SMSC91111 driver
|
||
|
||
* Patch by Vladimir Gurevich, 04 Jun 2003:
|
||
make ppc405 ethernet driver compatible with CONFIG_NET_MULTI option
|
||
|
||
* Patch by Stefan Roese, 05 Jun 2003:
|
||
- PPC4xx: Fix bug for initial stack in data cache as pointed out by
|
||
Thomas Schaefer (tschaefer@giga-stream.de). Now inital stack in
|
||
data cache can be used even if the chip select is in use.
|
||
- CFG_RX_ETH_BUFFER added to set the ethernet receive buffer count
|
||
(see README for further description).
|
||
- Changed config files of CONFIG_EEPRO100 boards to use the
|
||
CFG_RX_ETH_BUFFER define.
|
||
|
||
* Add support for RMU board
|
||
|
||
* Add support for TQM862L at 100/50 MHz
|
||
|
||
* Patch by Pantelis Antoniou, 02 Jun 2003:
|
||
major reconstruction of networking code;
|
||
add "ping" support (outgoing only!)
|
||
|
||
* Patch by Denis Peter, 04 June 2003:
|
||
add support for the MIP405T board
|
||
|
||
* Patches by Udi Finkelstein, 2 June 2003:
|
||
- Added support for custom keyboards, initialized by defining a
|
||
board-specific drv_keyboard_init as well as defining CONFIG_KEYBOARD .
|
||
- Added support for the RBC823 board.
|
||
- cpu/mpc8xx/lcd.c now automatically calculates the
|
||
Horizontal Pixel Count field.
|
||
|
||
* Fix alignment problem in BOOTP (dhcp_leasetime option)
|
||
[pointed out by Nicolas Lacressonni<6E>re, 2 Jun 2003]
|
||
|
||
* Patch by Mark Rakes, 14 May 2003:
|
||
add support for Intel e1000 gig cards.
|
||
|
||
* Patch by Nye Liu, 3 Jun 2003:
|
||
fix critical typo in MAMR definition (include/mpc8xx.h)
|
||
|
||
* Fix requirement to align U-Boot image on 16 kB boundaries on PPC.
|
||
|
||
* Patch by Klaus Heydeck, 2 Jun 2003
|
||
Minor changes for KUP4K configuration
|
||
|
||
* Patch by Marc Singer, 29 May 2003:
|
||
Fixed rarp boot method for IA32 and other little-endian CPUs.
|
||
|
||
* Patch by Marc Singer, 28 May 2003:
|
||
Added port I/O commands.
|
||
|
||
* Patch by Matthew McClintock, 28 May 2003
|
||
- cpu/mpc824x/start.S: fix relocation code when booting from RAM
|
||
- minor patches for utx8245
|
||
|
||
* Patch by Daniel Engstr<74>m, 28 May 2003:
|
||
x86 update
|
||
|
||
* Patch by Dave Ellis, 9 May 2003 + 27 May 2003:
|
||
add nand flash support to SXNI855T configuration
|
||
fix/extend nand flash support:
|
||
- fix 'nand erase' command so does not erase bad blocks
|
||
- fix 'nand write' command so does not write to bad blocks
|
||
- fix nand_probe() so handles no flash detected properly
|
||
- add doc/README.nand
|
||
- add .jffs2 and .oob options to nand read/write
|
||
- add 'nand bad' command to list bad blocks
|
||
- add 'clean' option to 'nand erase' to write JFFS2 clean markers
|
||
- make NAND read/write faster
|
||
|
||
* Patch by Rune Torgersen, 23 May 2003:
|
||
Update for MPC8266ADS board
|
||
|
||
* Get (mostly) rid of CFG_MONITOR_LEN definition; compute real length
|
||
instead CFG_MONITOR_LEN is now only used to determine _at_compile_
|
||
_time_ (!) if the environment is embedded within the U-Boot image,
|
||
or in a separate flash sector.
|
||
|
||
* Cleanup CFG_DER #defines in config files (wd maintained only)
|
||
|
||
* Fix data abort exception handling for arm920t CPU
|
||
|
||
* Fix alignment problems with flash driver for TRAB board
|
||
|
||
* Patch by Donald White, 21 May 2003:
|
||
fix calculation of base address in pci_hose_config_device()
|
||
|
||
* Fix bug in command line parsing: "cmd1;cmd2" is supposed to always
|
||
execute "cmd2", even if "cmd1" fails. Note that this is different
|
||
to "run var1 var2" where the contents of "var2" will NOT be
|
||
executed when a command in "var1" fails.
|
||
|
||
* Add zero-copy ramdisk support (requires corresponding kernel support!)
|
||
|
||
* Patch by Kyle Harris, 20 May 2003:
|
||
In preparation for an ixp port, rename cpu/xscale and arch-xscale
|
||
into cpu/pxa and arch-pxa.
|
||
|
||
* Patch by Stefan Roese, 23 May 2003:
|
||
- IBM PPC405EP port added.
|
||
- CONFIG_UART1_CONSOLE added. If defined internal UART1 (and not
|
||
UART0) is used as default U-Boot console. PPC4xx only!
|
||
- esd ASH405 board added (PPC405EP based).
|
||
- BUBINGA405EP board added (PPC405EP based - IBM Eval Board).
|
||
- esd CPCI405AB board added.
|
||
- esd PMC405 board added.
|
||
- Update of some esd boards.
|
||
|
||
* Patch by Denis Peter, 19 Mai 2003:
|
||
add support for the MIP405-3 board
|
||
|
||
* Patch by Dave Ellis, 22 May 2003:
|
||
Fix problem with only partially cleared .bss segment
|
||
|
||
* Patch by Rune Torgersen, 12 May 2003:
|
||
get PCI to work on a MPC8266ADS board; incorporate change to
|
||
cpu/mpc8260/pci.c to enable overrides of PCI memory parameters
|
||
|
||
* Patch by Nye Liu, 1 May 2003:
|
||
minor patches for the FADS8xx
|
||
|
||
* Patch by Thomas Sch<63>fer, 28 Apr 2003:
|
||
Fix SPD handling for 256 ECC DIMM on Walnut
|
||
|
||
* Add support for arbitrary bitmaps for TRAB's VFD command;
|
||
allow to pass boot bitmap addresses in environment variables;
|
||
allow for zero boot delay
|
||
|
||
* Patch by Christian Gei<65>inger, 19 May 2002:
|
||
On TRAB: wait until the dummy byte has been completely sent
|
||
|
||
* Patch by David Updegraff, 22 Apr 2003:
|
||
update for CrayL1 board
|
||
|
||
* Patch by Pantelis Antoniou, 21 Apr 2003:
|
||
add boot support for ARTOS (a proprietary OS)
|
||
|
||
* Patch by Steven Scholz, 11 Apr 2003:
|
||
Add support for RTC DS1338
|
||
|
||
* Patch by Rod Boyce, 24 Jan 2003:
|
||
Fix counting of extended partitions in diskboot command
|
||
|
||
* Patch by Christophe Lindheimer, 20 May 2003:
|
||
allow the use of CFG_LOADS when CFG_NO_FLASH is set
|
||
|
||
* Fix SDRAM timing on Purple board
|
||
|
||
* Add support for CompactFlash on ATC board
|
||
(includes support for Intel 82365 and compatible PC Card controllers,
|
||
and Yenta-compatible PCI-to-CardBus controllers)
|
||
|
||
* Patch by Mathijs Haarman, 08 May 2003:
|
||
Add lan91c96 driver (tested on Lubbock and custom PXA250 board only)
|
||
|
||
* Fix problem with usage of "true" (undefined in current versions of bfd.h)
|
||
|
||
* Add support for Promess ATC board
|
||
|
||
* Patch by Keith Outwater, 28 Apr 2003:
|
||
- Miscellaneous corrections and additions to GEN860T board specific code.
|
||
- Added GEN860_SC variant to GEN860T.
|
||
- Miscellaneous corrections to GEN860T documentation.
|
||
- Correct duplicate entry in U-Boot CREDITS file.
|
||
- Add GEN860T_SC entry in MAINTAINERS file.
|
||
- Update CREDITS file with GEN860T_SC info.
|
||
|
||
* Update Smiths Aerospace addresses in MAINTAINERS file
|
||
|
||
* Fix error handling in hush's version of "run" command
|
||
|
||
* LWMON extensions:
|
||
- Splashscreen support
|
||
- modem support
|
||
- sysmon support
|
||
- temperature dependend enabling of LCD
|
||
|
||
* Allow booting from old "PPCBoot" disk partitions
|
||
|
||
* Add support for TQM8255 Board / MPC8255 CPU
|
||
|
||
======================================================================
|
||
Changes for U-Boot 0.3.1:
|
||
======================================================================
|
||
|
||
* Make sure Block Lock Bits get cleared in R360MPI flash driver
|
||
|
||
* MPC823 LCD driver: Fill color map backwards, to allow for steady
|
||
display when Linux takes over
|
||
|
||
* Patch by Erwin Rol, 27 Feb 2003:
|
||
Add support for RTEMS (this time for real).
|
||
|
||
* Add support for "bmp info" and "bmp display" commands to load
|
||
bitmap images; this can be used (for example in a "preboot"
|
||
command) to display a splash screen very quickly after poweron.
|
||
|
||
* Add support for 133 MHz clock on INCA-IP board
|
||
|
||
* Patch by Lutz Dennig, 10 Apr 2003:
|
||
Update for R360MPI board
|
||
|
||
* Add new meaning to "autostart" environment variable:
|
||
If set to "no", a standalone image passed to the
|
||
"bootm" command will be copied to the load address
|
||
(and eventually uncompressed), but NOT be started.
|
||
This can be used to load and uncompress arbitrary
|
||
data.
|
||
|
||
* Patch by Stefan Roese, 10 Apr 2003:
|
||
Changed DHCP client to use IP address from server option field #54
|
||
from the OFFER packet in the server option field #54 in the REQUEST
|
||
packet. This fixes a problem using a Windows 2000 DHCP server,
|
||
where the DHCP-server is not the TFTP-server.
|
||
|
||
* Set max brightness for MN11236 displays on TRAB board
|
||
|
||
* Add support for TQM862L modules
|
||
|
||
======================================================================
|
||
Changes for U-Boot 0.3.0:
|
||
======================================================================
|
||
|
||
* Patch by Arun Dharankar, 4 Apr 2003:
|
||
Add IDMA example code (tested on 8260 only)
|
||
|
||
* Add support for Purple Board (MIPS64 5Kc)
|
||
|
||
* Add support for MIPS64 5Kc CPUs
|
||
|
||
* Fix missing setting of "loadaddr" and "bootfile" on ARM and MIPS
|
||
|
||
* Patch by Denis Peter, 04 Apr 2003:
|
||
- update MIP405-4 board
|
||
|
||
* Patch by Stefan Roese, 4 Apr 2003:
|
||
- U-Boot version environment variable "ver" added
|
||
(CONFIG_VERSION_VARIABLE).
|
||
- Changed PPC405GPr version from A to B.
|
||
- Changed CPCI405 to use CTS instead of DSR on PPC405 UART1.
|
||
|
||
* Patches by Denis Peter, 03 April 2003:
|
||
- fix PCI IRQs on MPL boards
|
||
- fix two more un-relocated pointer problems
|
||
|
||
* Fix behaviour of "run" command:
|
||
- print error message iv variable does not exist
|
||
- terminate processing of arguments in case of error
|
||
|
||
* Patches by Peter Figuli, 10 Mar 2003
|
||
- Add support for BTUART on PXA platform
|
||
- Add support for WEP EP250 (PXA) board
|
||
|
||
* Fix flash problems on INCA-IP; add tool to allow bruning images to
|
||
flash using a BDI2000
|
||
|
||
* Implement fix for I2C Edge Conditions problem for all boards that
|
||
use the bit-banging driver (common/soft_i2c.c)
|
||
|
||
* Patch by Martin Winistoerfer, 23 Mar 2003
|
||
- Add port to MPC555/556 microcontrollers
|
||
- Add support for cmi customer board with
|
||
Intel 28F128J3A, 28F320J3A or 28F640J3A flash.
|
||
|
||
* Patch by Rick Bronson, 28 Mar 2003:
|
||
- fix common/cmd_nand.c
|
||
|
||
* Patch by Arun Dharankar, 24 Mar 2003:
|
||
- add threads / scheduler example code
|
||
|
||
* Add patches by Robert Schwebel, 31 Mar 2003:
|
||
- add ctrl-c support for kermit download
|
||
- align bdinfo output on ARM
|
||
- csb226 board: bring in sync with innokom/memsetup.S
|
||
- csb226 board: fix MDREFR handling
|
||
- misc doc fixes / extensions
|
||
- innokom board: cleanup, MDREFR fix in memsetup.S, config update
|
||
- add BOOT_PROGRESS to armlinux.c
|
||
|
||
* Add CPU ID, version, and clock speed for INCA-IP
|
||
|
||
* Patches by Dave Ellis, 18 Mar 2003 for SXNI855T board:
|
||
- fix SRAM and SDRAM memory sizing
|
||
- add status LED support
|
||
- add MAC address for second (SCC1) ethernet port
|
||
|
||
* Update default environment for TQM8260 board
|
||
|
||
* Patch by Rick Bronson, 16 Mar 2003:
|
||
- Add NAND flash support for reading, writing, and erasing NAND
|
||
flash (certain forms of which are called SmartMedia).
|
||
- Add support for Atmel AT91RM9200DK ARM920T based development kit.
|
||
|
||
* Patches by Robert Schwebel, 19 Mar 2003:
|
||
- use arm-linux-gcc as default compiler for ARM
|
||
- fix i2c fixup code
|
||
- fix missing baudrate setting
|
||
- added $loadaddr / CFG_LOAD_ADDR support to loadb
|
||
- moved "ignoring trailing characters" _before_ u-boot wants to
|
||
print out diagnostics messages; removes bogus characters at the
|
||
end of transmission
|
||
|
||
* Patch by John Zhan, 18 Mar 2003:
|
||
Add support for SinoVee Microsystems SC8xx boards
|
||
|
||
* Patch by Rolf Offermanns, 21 Mar 2003:
|
||
ported the dnp1110 related changes from the current armboot cvs to
|
||
current u-boot cvs. smc91111 does not work. problem marked in
|
||
smc91111.c, grep for "FIXME".
|
||
|
||
* Patch by Brian Auld, 25 Mar 2003:
|
||
Add support for STM flash chips on ebony board
|
||
|
||
* Add PCI support for MPC8250 Boards (PM825 module)
|
||
|
||
* Patch by Stefan Roese, 25 Mar 2003:
|
||
- PCI405 update.
|
||
|
||
* Patch by Stefan Roese, 20 Mar 2003:
|
||
- CPCI4052 update (support for revision 3).
|
||
- Set edge conditioning circuitry on PPC405GPr for compatibility
|
||
to existing PPC405GP designs.
|
||
- Clip udiv to 5 bits on PPC405 (serial.c).
|
||
|
||
* Extend INCAIP board support:
|
||
- add automatic RAM size detection
|
||
- add "bdinfo" command
|
||
- pass flash address and size to Linux kernel
|
||
- switch to 150 MHz clock
|
||
|
||
* Avoid flicker on the TRAB's VFD by synchronizing the enable with
|
||
the HSYNC/VSYNC. Requires new CPLD code (Version 101 for Rev. 100
|
||
boards, version 153 for Rev. 200 boards).
|
||
|
||
* Patch by Vladimir Gurevich, 12 Mar 2003:
|
||
Fix relocation problem of statically initialized string pointers
|
||
in common/cmd_pci.c
|
||
|
||
* Patch by Kai-Uwe Bl<42>m, 12 Mar 2003:
|
||
Cleanup & bug fixes for JFFS2 code:
|
||
- the memory mangement was broken. It caused havoc on malloc by
|
||
writing beyond the block boundaries.
|
||
- the length calculation for files was wrong, sometimes resulting
|
||
in short file reads.
|
||
- data copying now optionally takes fragment version numbers into
|
||
account, to avoid copying from older data.
|
||
See doc/README.JFFS2 for details.
|
||
|
||
* Patch by Josef Wagner, 12 Mar 2003:
|
||
- 16/32 MB and 50/80 MHz support with auto-detection for IP860
|
||
- ETH05 and BEDBUG support for CU824
|
||
- added support for MicroSys CPC45
|
||
- new BOOTROM/FLASH0 and DOC base for PM826
|
||
|
||
* Patch by Robert Schwebel, 12 Mar 2003:
|
||
Fix the chpart command on innokom board
|
||
|
||
* Name cleanup:
|
||
mv include/asm-i386/ppcboot-i386.h include/asm-i386/u-boot-i386.h
|
||
s/PPCBoot/U-Boot/ in some files
|
||
s/pImage/uImage/ in some files
|
||
|
||
* Patch by Detlev Zundel, 15 Jan 2003:
|
||
Fix '' command line quoting
|
||
|
||
* Patch by The LEOX team, 19 Jan 2003:
|
||
- add support for the ELPT860 board
|
||
- add support for Dallas ds164x RTC
|
||
|
||
* Patches by David M<>ller, 31 Jan 2003:
|
||
- minimal setup for CardBus bridges
|
||
- add EEPROM read/write support in the CS8900 driver
|
||
- add support for the builtin I2C controller in the Samsung s3c24x0 chips
|
||
- add support for MPL's VCMA9 (Samsung s3c2410 based) board
|
||
|
||
* Patch by Steven Scholz, 04 Feb 2003:
|
||
add support for RTC DS1307
|
||
|
||
* Patch by Reinhard Meyer, 5 Feb 2003:
|
||
fix PLPRCR/SCCR init sequence on 8xx to allow for
|
||
changes of EBDF by software
|
||
|
||
* Patch by Vladimir Gurevich, 07 Feb 2003:
|
||
"API-compatibility patch" for 4xx I2C driver
|
||
|
||
* TRAB fixes / extensions:
|
||
- Restore VFD brightness as saved in environment
|
||
- add support for Fujitsu flashes
|
||
- make sure both buzzers are turned off (drive low level)
|
||
|
||
* Patches by Robert Schwebel, 06 Mar 2003:
|
||
- fix bug in BOOTP code (must use NetCopyIP)
|
||
- update of CSB226 port
|
||
- clear BSS segment on XScale
|
||
- added support for i2c_init_board() function
|
||
- update to the Innokom plattform
|
||
|
||
* Extend support for redundand environments for configurations where
|
||
environment size < sector size
|
||
|
||
* Patch by Rune Torgersen, 13 Feb 2003:
|
||
Add support for Motorola MPC8266ADS board
|
||
|
||
* Patch by Kyle Harris, 19 Feb 2003:
|
||
patches for the Intel lubbock board:
|
||
memsetup.S - general cleanup (based on Robert's csb226 code)
|
||
flash.c - overhaul, actually works now
|
||
lubbock.c - fix init funcs to return proper value
|
||
|
||
* Patch by Kenneth Johansson, 26 Feb 2003:
|
||
- Fixed off by one in RFTA calculation.
|
||
- No need to abort when LDF is lower than we can program it's only
|
||
minimum timing so clamp it to what we can do.
|
||
- Takes function pointer to function for reading the spd_nvram. Usefull
|
||
for faking data or hardcode a module without the nvram.
|
||
- fix other user for above change
|
||
- fix some comments.
|
||
|
||
* Patches by Brian Waite, 26 Feb 2003:
|
||
- fix port for evb64260 board
|
||
- fix PCI for evb64260 board
|
||
- fix PCI scan
|
||
|
||
* Patch by Reinhard Meyer, 1 Mar 2003:
|
||
Add support for EMK TOP860 Module
|
||
|
||
* Patch by Yuli Barcohen, 02 Mar 2003:
|
||
Add SPD EEPROM support for MPC8260ADS board
|
||
|
||
* Patch by Robert Schwebel, 21 Jan 2003:
|
||
- Add support for Innokom board
|
||
- Don't complain if "install" fails
|
||
- README cleanup (remove duplicated lines)
|
||
- Update PXA header files
|
||
|
||
* Add documentation for existing POST code (doc/README.POST)
|
||
|
||
* Patch by Laudney Ren, 15 Jan 2003:
|
||
Fix handling of redundand environment in "tools/envcrc.c"
|
||
|
||
* Patch by Detlev Zundel, 28 Feb 2003:
|
||
Add bedbug support for 824x systems
|
||
|
||
* Add support for 16 MB flash configuration of TRAB board
|
||
|
||
* Patch by Erwin Rol, 27 Feb 2003:
|
||
Add support for RTEMS
|
||
|
||
* Add image information to README
|
||
|
||
* Patch by Stefan Roese, 18 Feb 2003:
|
||
CPCIISER4 configuration updated.
|
||
|
||
* Patch by Stefan Roese, 17 Feb 2003:
|
||
Fixed bug in ext. serial clock setup on PPC405 (since PPC440 port).
|
||
|
||
* Patch by Stefan Roese, 13 Feb 2003:
|
||
Add "pcidelay" environment variable (in ms, enabled via
|
||
CONFIG_PCI_BOOTDELAY).
|
||
PCI spec 2.2 defines, that a pci target has 2^25 pci clocks after
|
||
RST# to respond to configuration cycles (33MHz -> 1s).
|
||
|
||
* Fix dual PCMCIA slot support (when running with just one
|
||
slot populated)
|
||
|
||
* Add VFD type detection to trab board
|
||
|
||
* extend drivers/cs8900.c driver to synchronize ethaddr environment
|
||
variable with value in the EEPROM
|
||
|
||
* Patch by Stefan Roese, 10 Feb 2003:
|
||
Add support for 4MB and 128MB onboard SDRAM (cpu/ppc4xx/sdram.c)
|
||
|
||
* Add support for MIPS32 4Kc CPUs
|
||
|
||
* Add support for INCA-IP Board
|
||
|
||
======================================================================
|
||
Changes for U-Boot 0.2.2:
|
||
======================================================================
|
||
|
||
* Add dual ethernet support on PM826
|
||
|
||
* Add support for LXT971 PHY on PM826
|
||
|
||
* Patch by Tord Andersson, 16 Jan 2003:
|
||
Fix flash sector count for TQM8xxL
|
||
|
||
* Fix I2C EEPROM problem on ICU862 board (would only write the first
|
||
16 bytes out of each 32 byte block)
|
||
|
||
======================================================================
|
||
Changes for U-Boot 0.2.1:
|
||
======================================================================
|
||
|
||
* Add support for V37 board
|
||
(patch by J<>n Benediktsson, 11 Dec 2002)
|
||
|
||
* Update baudrate in bd_info when it gets changed
|
||
|
||
* Add watchdog trigger points while waiting for serial port
|
||
(so far only 8xx -- needed on LWMON with 100ms watchdog)
|
||
|
||
* Improve command line tool to access the U-Boot's environment
|
||
(figuration of the utility, using a config file)
|
||
|
||
* Add single quote support for (old) command line parser
|
||
|
||
* Switch LWMON board default config from FRAM to EEPROM;
|
||
in POST, EEPROM shows up on 8 addresses
|
||
|
||
======================================================================
|
||
Changes for U-Boot 0.2.0:
|
||
======================================================================
|
||
|
||
* Use 1-byte-read instead of -write for iprobe() function
|
||
Add i2c commands to PM826 config
|
||
|
||
* extend I2C POST code: check for list on known addresses
|
||
|
||
* Improve log buffer code; use "loglevel" to decide which messages
|
||
to log on the console, too (like in Linux); get rid of "logstart"
|
||
|
||
* Add command line tool to access the U-Boot's environment
|
||
(board-specific for TRAB now, to be fixed later)
|
||
|
||
* Patch by Hans-Joerg Frieden, 06 Dec 2002
|
||
Fix misc problems with AmigaOne support
|
||
|
||
* Patch by Chris Hallinan, 3 Dec 2002:
|
||
minor cleanup to the MPC8245 EPIC driver
|
||
|
||
* Patch by Pierre Aubert , 28 Nov 2002
|
||
Add support for external (SIU) interrupts on MPC8xx
|
||
|
||
* Patch by Pierre Aubert , 28 Nov 2002
|
||
Fix nested syscalls bug in standalone applications
|
||
|
||
* Patch by David M<>ller, 27 Nov 2002:
|
||
fix output of "pciinfo" command for CardBus bridge devices.
|
||
|
||
* Fix bug in TQM8260 board detection - boards got stuck when board ID
|
||
was not readable
|
||
|
||
* Add LED indication for IDE activity on KUP4K board
|
||
|
||
* Fix startup problems with VFD display on TRAB
|
||
|
||
* Patch by Pierre Aubert, 20 Nov 2002
|
||
Add driver for Epson SED13806 graphic controller.
|
||
Add support for BMP logos in cfb_console driver.
|
||
|
||
* Added support for both PCMCIA slots (at the same time!) on MPC8xx
|
||
|
||
* Patch by Rod Boyce, 21 Nov 2002:
|
||
fix PCMCIA on MBX8xx board
|
||
|
||
* Patch by Pierre Aubert , 21 Nov 2002
|
||
Add CFG_CPM_POST_WORD_ADDR to make the offset of the
|
||
bootmode word in DPRAM configurable
|
||
|
||
* Patch by Daniel Engstr<74>m, 18 Nov 2002:
|
||
Fixes for x86 port (mostly strings issues)
|
||
|
||
* Patch by Ken Chou, 18 Nov 2002:
|
||
Fix for natsemi NIC cards (DP83815)
|
||
|
||
* Patch by Pierre Aubert, 19 Nov 2002:
|
||
fix a bug for the MII configuration, and some warnings
|
||
|
||
* Patch by Thomas Frieden, 13 Nov 2002:
|
||
Add code for AmigaOne board
|
||
(preliminary merge to U-Boot, still WIP)
|
||
|
||
* Patch by Jon Diekema, 12 Nov 2002:
|
||
- Adding URL for IEEE OUI lookup
|
||
- Making the autoboot #defines dependent on CONFIG_AUTOBOOT_KEYED
|
||
being defined.
|
||
- In the CONFIG_EXTRA_ENV_SETTINGS #define, the root-on-initrd and
|
||
root-on-nfs macros are designed to switch how the default boot
|
||
method gets defined.
|
||
|
||
* Patch by Daniel Engstr<74>m, 13 Nov 2002:
|
||
Add support for i386 architecture and AMD SC520 board
|
||
|
||
* Patch by Pierre Aubert, 12 Nov 2002:
|
||
Add support for DOS filesystem and booting from DOS floppy disk
|
||
|
||
* Patch by Jim Sandoz, 07 Nov 2002:
|
||
Increase number of network RX buffers (PKTBUFSRX in
|
||
"include/net.h") for EEPRO100 based boards (especially SP8240)
|
||
which showed "Receiver is not ready" errors when U-Boot was
|
||
processing the receive buffers slower than the network controller
|
||
was filling them.
|
||
|
||
* Patch by Andreas Oberritter, 09 Nov 2002:
|
||
Change behaviour of NetLoop(): return -1 for errors, filesize
|
||
otherwise; return code 0 is valid an means no file loaded - in this
|
||
case the environment still gets updated!
|
||
|
||
* Patches by Jon Diekema, 9 Nov 2002:
|
||
- improve ADC/DAC clocking on the SACSng board to align
|
||
the failing edges of LRCLK and SCLK
|
||
- sbc8260 configuration tweaks
|
||
- add status LED support for 82xx systems
|
||
- wire sspi/sspo commands into command handler; improved error
|
||
handlering
|
||
- add timestamp support and alternate memory test to the
|
||
SACSng configuration
|
||
|
||
* Patch by Vince Husovsky, 7 Nov 2002:
|
||
Add "-n" to linker options to get rid of "Not enough room for
|
||
program headers" problem
|
||
|
||
* Patch by David M<>ller, 05 Nov 2002
|
||
Rename CONFIG_PLL_INPUT_FREQ to CONFIG_SYS_CLK_FREQ
|
||
so we can use an already existing name
|
||
|
||
* Patch by Pierre Aubert, 05 Nov 2002
|
||
Hardware relatied improvments in FDC boot code
|
||
|
||
* Patch by Holger Schurig, 5 Nov 2002:
|
||
Make the PXA really change it's frequency
|
||
|
||
* Patch by Pierre Aubert, 05 Nov 2002
|
||
Add support for slave serial Spartan 2 FPGAs
|
||
|
||
* Fix uninitialized memory (MAC address) in 8xx SCC/FEC ethernet
|
||
drivers
|
||
|
||
* Add support for log buffer which can be passed to Linux kernel's
|
||
syslog mechanism; used especially for POST results.
|
||
|
||
* Patch by Klaus Heydeck, 31 Oct 2002:
|
||
Add initial support for kup4k board
|
||
|
||
* Patch by Robert Schwebel, 04 Nov 2002:
|
||
- use watchdog to reset PXA250 systems
|
||
- added progress callbacks to (some of the) ARM code
|
||
- update for Cogent CSB226 board
|
||
|
||
* Add support for FPS860 board
|
||
|
||
* Patch by Guillaume Alexandre,, 04 Nov 2002:
|
||
Improve PCI access on 32-bits Compact PCI bus
|
||
|
||
* Fix mdelay() on TRAB - this was still the debugging version with
|
||
seconds instead of ms.
|
||
|
||
* Patch by Robert Schwebel, 1 Nov 2002:
|
||
XScale related cleanup (affects all ARM boards)
|
||
|
||
* Cleanup of names and README.
|
||
|
||
======================================================================
|
||
Notes for U-Boot 0.1.0:
|
||
======================================================================
|
||
|
||
This is the initial version of "Das U-Boot", the Universal Boot Loader.
|
||
|
||
It is based on version 2.0.0 (the "Halloween Release") of PPCBoot.
|
||
For information about the history of the project please see the
|
||
PPCBoot project page at http://sourceforge.net/projects/ppcboot
|
||
|
||
======================================================================
|