mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-23 10:28:51 +09:00
![York Sun](/assets/img/avatar_default.png)
Replace CONFIG_P5040 with ARCH_P5040 in Kconfig and clean up existing macros. Signed-off-by: York Sun <york.sun@nxp.com>
101 lines
2.5 KiB
C
101 lines
2.5 KiB
C
/*
|
|
* Author Adrian Cox
|
|
* Based somewhat on board/freescale/corenet_ds/eth_hydra.c
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <netdev.h>
|
|
#include <asm/fsl_serdes.h>
|
|
#include <fm_eth.h>
|
|
#include <fsl_mdio.h>
|
|
#include <malloc.h>
|
|
#include <fdt_support.h>
|
|
#include <fsl_dtsec.h>
|
|
|
|
#ifdef CONFIG_FMAN_ENET
|
|
|
|
#define FIRST_PORT_ADDR 3
|
|
#define SECOND_PORT_ADDR 7
|
|
|
|
#ifdef CONFIG_ARCH_P5040
|
|
#define FIRST_PORT FM1_DTSEC5
|
|
#define SECOND_PORT FM2_DTSEC5
|
|
#else
|
|
#define FIRST_PORT FM1_DTSEC4
|
|
#define SECOND_PORT FM1_DTSEC5
|
|
#endif
|
|
|
|
#define IS_VALID_PORT(p) ((p) == FIRST_PORT || (p) == SECOND_PORT)
|
|
|
|
static void cyrus_phy_tuning(int phy)
|
|
{
|
|
/*
|
|
* Enable RGMII delay on Tx and Rx for CPU port
|
|
*/
|
|
printf("Tuning PHY @ %d\n", phy);
|
|
|
|
/* sets address 0x104 or reg 260 for writing */
|
|
miiphy_write(DEFAULT_FM_MDIO_NAME, phy, 0xb, 0x8104);
|
|
/* Sets RXC/TXC to +0.96ns and TX_CTL/RX_CTL to -0.84ns */
|
|
miiphy_write(DEFAULT_FM_MDIO_NAME, phy, 0xc, 0xf0f0);
|
|
/* sets address 0x105 or reg 261 for writing */
|
|
miiphy_write(DEFAULT_FM_MDIO_NAME, phy, 0xb, 0x8105);
|
|
/* writes to address 0x105 , RXD[3..0] to -0. */
|
|
miiphy_write(DEFAULT_FM_MDIO_NAME, phy, 0xc, 0x0000);
|
|
/* sets address 0x106 or reg 261 for writing */
|
|
miiphy_write(DEFAULT_FM_MDIO_NAME, phy, 0xb, 0x8106);
|
|
/* writes to address 0x106 , TXD[3..0] to -0.84ns */
|
|
miiphy_write(DEFAULT_FM_MDIO_NAME, phy, 0xc, 0x0000);
|
|
/* force re-negotiation */
|
|
miiphy_write(DEFAULT_FM_MDIO_NAME, phy, 0x0, 0x1340);
|
|
}
|
|
#endif
|
|
|
|
int board_eth_init(bd_t *bis)
|
|
{
|
|
#ifdef CONFIG_FMAN_ENET
|
|
struct fsl_pq_mdio_info dtsec_mdio_info;
|
|
unsigned int i;
|
|
|
|
printf("Initializing Fman\n");
|
|
|
|
|
|
/* Register the real 1G MDIO bus */
|
|
dtsec_mdio_info.regs =
|
|
(struct tsec_mii_mng *)CONFIG_SYS_FM1_DTSEC1_MDIO_ADDR;
|
|
dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME;
|
|
|
|
fsl_pq_mdio_init(bis, &dtsec_mdio_info);
|
|
|
|
|
|
fm_info_set_phy_address(FIRST_PORT, FIRST_PORT_ADDR);
|
|
fm_info_set_mdio(FIRST_PORT,
|
|
miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME));
|
|
fm_info_set_phy_address(SECOND_PORT, SECOND_PORT_ADDR);
|
|
fm_info_set_mdio(SECOND_PORT,
|
|
miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME));
|
|
|
|
/* Never disable DTSEC1 - it controls MDIO */
|
|
for (i = FM1_DTSEC2; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
|
|
if (!IS_VALID_PORT(i))
|
|
fm_disable_port(i);
|
|
}
|
|
|
|
#ifdef CONFIG_ARCH_P5040
|
|
for (i = FM2_DTSEC2; i < FM2_DTSEC1 + CONFIG_SYS_NUM_FM2_DTSEC; i++) {
|
|
if (!IS_VALID_PORT(i))
|
|
fm_disable_port(i);
|
|
}
|
|
#endif
|
|
|
|
cpu_eth_init(bis);
|
|
|
|
cyrus_phy_tuning(FIRST_PORT_ADDR);
|
|
cyrus_phy_tuning(SECOND_PORT_ADDR);
|
|
#endif
|
|
|
|
return pci_eth_init(bis);
|
|
}
|