mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-16 23:18:51 +09:00
![Steven A. Falco](/assets/img/avatar_default.png)
APM errata CHIP_21 for the 405EX/EXr (from the rev 1.09 document dated 4/27/11) states that rev D processors may wake up with the wrong feature set. This patch implements the APM-proposed workaround. To enable this patch for your board, add the appropriate define for your CPU to your board header file. See kilauea.h for more information. The following variants are supported: #define CONFIG_SYS_4xx_CHIP_21_405EX_NO_SECURITY #define CONFIG_SYS_4xx_CHIP_21_405EX_SECURITY #define CONFIG_SYS_4xx_CHIP_21_405EXr_NO_SECURITY #define CONFIG_SYS_4xx_CHIP_21_405EXr_SECURITY Please note that if you select the wrong define, your board will not boot, and JTAG will be required to recover. Tested on custom boards using: CONFIG_SYS_4xx_CHIP_21_405EX_NO_SECURITY <sfalco@harris.com> CONFIG_SYS_4xx_CHIP_21_405EX_SECURITY <eibach@gdsys.de> Signed-off-by: Steve Falco <sfalco@harris.com> Acked-by: Dirk Eibach <eibach@gdsys.de> Signed-off-by: Stefan Roese <sr@denx.de>
639 lines
27 KiB
C
639 lines
27 KiB
C
/*
|
|
* Copyright (c) 2008 Nuovation System Designs, LLC
|
|
* Grant Erickson <gerickson@nuovations.com>
|
|
*
|
|
* (C) Copyright 2007
|
|
* Stefan Roese, DENX Software Engineering, sr@denx.de.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
/************************************************************************
|
|
* kilauea.h - configuration for AMCC Kilauea (405EX)
|
|
***********************************************************************/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* High Level Configuration Options
|
|
*----------------------------------------------------------------------*/
|
|
#define CONFIG_KILAUEA 1 /* Board is Kilauea */
|
|
#define CONFIG_4xx 1 /* ... PPC4xx family */
|
|
#define CONFIG_405EX 1 /* Specifc 405EX support*/
|
|
#define CONFIG_SYS_CLK_FREQ 33333333 /* ext frequency to pll */
|
|
|
|
#ifndef CONFIG_SYS_TEXT_BASE
|
|
#define CONFIG_SYS_TEXT_BASE 0xFFFA0000
|
|
#endif
|
|
|
|
/*
|
|
* CHIP_21 errata - you must set this to match your exact CPU, else your
|
|
* board will not boot. DO NOT enable this unless you have JTAG available
|
|
* for recovery, in the event you get it wrong.
|
|
*
|
|
* Kilauea uses the 405EX, while Haleakala uses the 405EXr. Either board
|
|
* may be equipped for security or not. You must look at the CPU part
|
|
* number to be sure what you have.
|
|
*/
|
|
/* #define CONFIG_SYS_4xx_CHIP_21_405EX_NO_SECURITY */
|
|
/* #define CONFIG_SYS_4xx_CHIP_21_405EX_SECURITY */
|
|
/* #define CONFIG_SYS_4xx_CHIP_21_405EXr_NO_SECURITY */
|
|
/* #define CONFIG_SYS_4xx_CHIP_21_405EXr_SECURITY */
|
|
|
|
/*
|
|
* Include common defines/options for all AMCC eval boards
|
|
*/
|
|
#define CONFIG_HOSTNAME kilauea
|
|
#include "amcc-common.h"
|
|
|
|
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
|
|
#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */
|
|
#define CONFIG_BOARD_TYPES
|
|
#define CONFIG_BOARD_EMAC_COUNT
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Base addresses -- Note these are effective addresses where the
|
|
* actual resources get mapped (not physical addresses)
|
|
*----------------------------------------------------------------------*/
|
|
#define CONFIG_SYS_FLASH_BASE 0xFC000000
|
|
#define CONFIG_SYS_NAND_ADDR 0xF8000000
|
|
#define CONFIG_SYS_FPGA_BASE 0xF0000000
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Initial RAM & Stack Pointer Configuration Options
|
|
*
|
|
* There are traditionally three options for the primordial
|
|
* (i.e. initial) stack usage on the 405-series:
|
|
*
|
|
* 1) On-chip Memory (OCM) (i.e. SRAM)
|
|
* 2) Data cache
|
|
* 3) SDRAM
|
|
*
|
|
* For the 405EX(r), there is no OCM, so we are left with (2) or (3)
|
|
* the latter of which is less than desireable since it requires
|
|
* setting up the SDRAM and ECC in assembly code.
|
|
*
|
|
* To use (2), define 'CONFIG_SYS_INIT_DCACHE_CS' to be an unused chip
|
|
* select on the External Bus Controller (EBC) and then select a
|
|
* value for 'CONFIG_SYS_INIT_RAM_ADDR' outside of the range of valid,
|
|
* physical SDRAM. Otherwise, undefine 'CONFIG_SYS_INIT_DCACHE_CS' and
|
|
* select a value for 'CONFIG_SYS_INIT_RAM_ADDR' within the range of valid,
|
|
* physical SDRAM to use (3).
|
|
*-----------------------------------------------------------------------*/
|
|
|
|
#define CONFIG_SYS_INIT_DCACHE_CS 4
|
|
|
|
#if defined(CONFIG_SYS_INIT_DCACHE_CS)
|
|
#define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_SDRAM_BASE + ( 1 << 30)) /* 1 GiB */
|
|
#else
|
|
#define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_SDRAM_BASE + (32 << 20)) /* 32 MiB */
|
|
#endif /* defined(CONFIG_SYS_INIT_DCACHE_CS) */
|
|
|
|
#define CONFIG_SYS_INIT_RAM_SIZE (4 << 10) /* 4 KiB */
|
|
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
|
|
|
/*
|
|
* If the data cache is being used for the primordial stack and global
|
|
* data area, the POST word must be placed somewhere else. The General
|
|
* Purpose Timer (GPT) is unused by u-boot and the kernel and preserves
|
|
* its compare and mask register contents across reset, so it is used
|
|
* for the POST word.
|
|
*/
|
|
|
|
#if defined(CONFIG_SYS_INIT_DCACHE_CS)
|
|
# define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
|
|
# define CONFIG_SYS_POST_WORD_ADDR (CONFIG_SYS_PERIPHERAL_BASE + GPT0_COMP6)
|
|
#else
|
|
# define CONFIG_SYS_INIT_EXTRA_SIZE 16
|
|
# define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - CONFIG_SYS_INIT_EXTRA_SIZE)
|
|
# define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_INIT_RAM_ADDR
|
|
#endif /* defined(CONFIG_SYS_INIT_DCACHE_CS) */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Serial Port
|
|
*----------------------------------------------------------------------*/
|
|
#define CONFIG_SYS_EXT_SERIAL_CLOCK 11059200 /* ext. 11.059MHz clk */
|
|
#define CONFIG_CONS_INDEX 1 /* Use UART0 */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Environment
|
|
*----------------------------------------------------------------------*/
|
|
#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
|
|
#define CONFIG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
|
|
#else
|
|
#define CONFIG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */
|
|
#define CONFIG_ENV_IS_EMBEDDED 1 /* use embedded environment */
|
|
#endif
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* FLASH related
|
|
*----------------------------------------------------------------------*/
|
|
#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */
|
|
#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */
|
|
|
|
#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE}
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
|
|
|
|
#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
|
|
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
|
|
|
|
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
|
|
#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
|
|
|
|
#ifdef CONFIG_ENV_IS_IN_FLASH
|
|
#define CONFIG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */
|
|
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE-CONFIG_ENV_SECT_SIZE)
|
|
#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
|
|
|
|
/* Address and size of Redundant Environment Sector */
|
|
#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE)
|
|
#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
|
|
#endif /* CONFIG_ENV_IS_IN_FLASH */
|
|
|
|
/*
|
|
* IPL (Initial Program Loader, integrated inside CPU)
|
|
* Will load first 4k from NAND (SPL) into cache and execute it from there.
|
|
*
|
|
* SPL (Secondary Program Loader)
|
|
* Will load special U-Boot version (NUB) from NAND and execute it. This SPL
|
|
* has to fit into 4kByte. It sets up the CPU and configures the SDRAM
|
|
* controller and the NAND controller so that the special U-Boot image can be
|
|
* loaded from NAND to SDRAM.
|
|
*
|
|
* NUB (NAND U-Boot)
|
|
* This NAND U-Boot (NUB) is a special U-Boot version which can be started
|
|
* from RAM. Therefore it mustn't (re-)configure the SDRAM controller.
|
|
*
|
|
* On 405EX the SPL is copied to SDRAM before the NAND controller is
|
|
* set up. While still running from location 0xfffff000...0xffffffff the
|
|
* NAND controller cannot be accessed since it is attached to CS0 too.
|
|
*/
|
|
#define CONFIG_SYS_NAND_BOOT_SPL_SRC 0xfffff000 /* SPL location */
|
|
#define CONFIG_SYS_NAND_BOOT_SPL_SIZE (4 << 10) /* SPL size */
|
|
#define CONFIG_SYS_NAND_BOOT_SPL_DST 0x00800000 /* Copy SPL here */
|
|
#define CONFIG_SYS_NAND_U_BOOT_DST 0x01000000 /* Load NUB to this addr */
|
|
#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST /* Start NUB from this addr */
|
|
#define CONFIG_SYS_NAND_BOOT_SPL_DELTA (CONFIG_SYS_NAND_BOOT_SPL_SRC - CONFIG_SYS_NAND_BOOT_SPL_DST)
|
|
|
|
/*
|
|
* Define the partitioning of the NAND chip (only RAM U-Boot is needed here)
|
|
*/
|
|
#define CONFIG_SYS_NAND_U_BOOT_OFFS (16 << 10) /* Offset to RAM U-Boot image */
|
|
#define CONFIG_SYS_NAND_U_BOOT_SIZE (384 << 10) /* Size of RAM U-Boot image */
|
|
|
|
/*
|
|
* Now the NAND chip has to be defined (no autodetection used!)
|
|
*/
|
|
#define CONFIG_SYS_NAND_PAGE_SIZE 512 /* NAND chip page size */
|
|
#define CONFIG_SYS_NAND_BLOCK_SIZE (16 << 10) /* NAND chip block size */
|
|
#define CONFIG_SYS_NAND_PAGE_COUNT 32 /* NAND chip page count */
|
|
#define CONFIG_SYS_NAND_BAD_BLOCK_POS 5 /* Location of bad block marker */
|
|
#define CONFIG_SYS_NAND_4_ADDR_CYCLE 1 /* Fourth addr used (>32MB) */
|
|
|
|
#define CONFIG_SYS_NAND_ECCSIZE 256
|
|
#define CONFIG_SYS_NAND_ECCBYTES 3
|
|
#define CONFIG_SYS_NAND_ECCSTEPS (CONFIG_SYS_NAND_PAGE_SIZE / CONFIG_SYS_NAND_ECCSIZE)
|
|
#define CONFIG_SYS_NAND_OOBSIZE 16
|
|
#define CONFIG_SYS_NAND_ECCTOTAL (CONFIG_SYS_NAND_ECCBYTES * CONFIG_SYS_NAND_ECCSTEPS)
|
|
#define CONFIG_SYS_NAND_ECCPOS {0, 1, 2, 3, 6, 7}
|
|
|
|
#ifdef CONFIG_ENV_IS_IN_NAND
|
|
/*
|
|
* For NAND booting the environment is embedded in the U-Boot image. Please take
|
|
* look at the file board/amcc/sequoia/u-boot-nand.lds for details.
|
|
*/
|
|
#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
|
|
#define CONFIG_ENV_OFFSET (CONFIG_SYS_NAND_U_BOOT_OFFS + CONFIG_ENV_SIZE)
|
|
#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
|
|
#endif
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* NAND FLASH
|
|
*----------------------------------------------------------------------*/
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
|
#define CONFIG_SYS_NAND_BASE (CONFIG_SYS_NAND_ADDR + CONFIG_SYS_NAND_CS)
|
|
#define CONFIG_SYS_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl. chips */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* DDR SDRAM
|
|
*----------------------------------------------------------------------*/
|
|
#define CONFIG_SYS_MBYTES_SDRAM (256) /* 256MB */
|
|
|
|
/*
|
|
* CONFIG_PPC4xx_DDR_AUTOCALIBRATION
|
|
*
|
|
* Note: DDR Autocalibration Method_A scans the full range of possible PPC4xx
|
|
* SDRAM Controller DDR autocalibration values and takes a lot longer
|
|
* to run than Method_B.
|
|
* (See the Method_A and Method_B algorithm discription in the file:
|
|
* arch/powerpc/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c)
|
|
* Define CONFIG_PPC4xx_DDR_METHOD_A to use DDR autocalibration Method_A
|
|
*
|
|
* DDR Autocalibration Method_B is the default.
|
|
*/
|
|
#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
|
|
#define CONFIG_PPC4xx_DDR_AUTOCALIBRATION /* IBM DDR autocalibration */
|
|
#define DEBUG_PPC4xx_DDR_AUTOCALIBRATION /* dynamic DDR autocal debug */
|
|
#undef CONFIG_PPC4xx_DDR_METHOD_A
|
|
#endif
|
|
|
|
#define CONFIG_SYS_SDRAM0_MB0CF_BASE (( 0 << 20) + CONFIG_SYS_SDRAM_BASE)
|
|
|
|
/* DDR1/2 SDRAM Device Control Register Data Values */
|
|
#define CONFIG_SYS_SDRAM0_MB0CF ((CONFIG_SYS_SDRAM0_MB0CF_BASE >> 3) | \
|
|
SDRAM_RXBAS_SDSZ_256MB | \
|
|
SDRAM_RXBAS_SDAM_MODE7 | \
|
|
SDRAM_RXBAS_SDBE_ENABLE)
|
|
#define CONFIG_SYS_SDRAM0_MB1CF SDRAM_RXBAS_SDBE_DISABLE
|
|
#define CONFIG_SYS_SDRAM0_MB2CF SDRAM_RXBAS_SDBE_DISABLE
|
|
#define CONFIG_SYS_SDRAM0_MB3CF SDRAM_RXBAS_SDBE_DISABLE
|
|
#define CONFIG_SYS_SDRAM0_MCOPT1 (SDRAM_MCOPT1_PMU_OPEN | \
|
|
SDRAM_MCOPT1_8_BANKS | \
|
|
SDRAM_MCOPT1_DDR2_TYPE | \
|
|
SDRAM_MCOPT1_QDEP | \
|
|
SDRAM_MCOPT1_DCOO_DISABLED)
|
|
#define CONFIG_SYS_SDRAM0_MCOPT2 0x00000000
|
|
#define CONFIG_SYS_SDRAM0_MODT0 (SDRAM_MODT_EB0W_ENABLE | \
|
|
SDRAM_MODT_EB0R_ENABLE)
|
|
#define CONFIG_SYS_SDRAM0_MODT1 0x00000000
|
|
#define CONFIG_SYS_SDRAM0_CODT (SDRAM_CODT_RK0R_ON | \
|
|
SDRAM_CODT_CKLZ_36OHM | \
|
|
SDRAM_CODT_DQS_1_8_V_DDR2 | \
|
|
SDRAM_CODT_IO_NMODE)
|
|
#define CONFIG_SYS_SDRAM0_RTR SDRAM_RTR_RINT_ENCODE(1560)
|
|
#define CONFIG_SYS_SDRAM0_INITPLR0 (SDRAM_INITPLR_ENABLE | \
|
|
SDRAM_INITPLR_IMWT_ENCODE(80) | \
|
|
SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_NOP))
|
|
#define CONFIG_SYS_SDRAM0_INITPLR1 (SDRAM_INITPLR_ENABLE | \
|
|
SDRAM_INITPLR_IMWT_ENCODE(3) | \
|
|
SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_PRECHARGE) | \
|
|
SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_MR) | \
|
|
SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_PRECHARGE_ALL))
|
|
#define CONFIG_SYS_SDRAM0_INITPLR2 (SDRAM_INITPLR_ENABLE | \
|
|
SDRAM_INITPLR_IMWT_ENCODE(2) | \
|
|
SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR) | \
|
|
SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_EMR2) | \
|
|
SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_EMR2_TEMP_COMMERCIAL))
|
|
#define CONFIG_SYS_SDRAM0_INITPLR3 (SDRAM_INITPLR_ENABLE | \
|
|
SDRAM_INITPLR_IMWT_ENCODE(2) | \
|
|
SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR) | \
|
|
SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_EMR3) | \
|
|
SDRAM_INITPLR_IMA_ENCODE(0))
|
|
#define CONFIG_SYS_SDRAM0_INITPLR4 (SDRAM_INITPLR_ENABLE | \
|
|
SDRAM_INITPLR_IMWT_ENCODE(2) | \
|
|
SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR) | \
|
|
SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_EMR) | \
|
|
SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_EMR_DQS_DISABLE | \
|
|
JEDEC_MA_EMR_RTT_75OHM))
|
|
#define CONFIG_SYS_SDRAM0_INITPLR5 (SDRAM_INITPLR_ENABLE | \
|
|
SDRAM_INITPLR_IMWT_ENCODE(2) | \
|
|
SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR) | \
|
|
SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_MR) | \
|
|
SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_MR_WR_DDR2_3_CYC | \
|
|
JEDEC_MA_MR_CL_DDR2_4_0_CLK | \
|
|
JEDEC_MA_MR_BLEN_4 | \
|
|
JEDEC_MA_MR_DLL_RESET))
|
|
#define CONFIG_SYS_SDRAM0_INITPLR6 (SDRAM_INITPLR_ENABLE | \
|
|
SDRAM_INITPLR_IMWT_ENCODE(3) | \
|
|
SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_PRECHARGE) | \
|
|
SDRAM_INITPLR_IBA_ENCODE(0x0) | \
|
|
SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_PRECHARGE_ALL))
|
|
#define CONFIG_SYS_SDRAM0_INITPLR7 (SDRAM_INITPLR_ENABLE | \
|
|
SDRAM_INITPLR_IMWT_ENCODE(26) | \
|
|
SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_REFRESH))
|
|
#define CONFIG_SYS_SDRAM0_INITPLR8 (SDRAM_INITPLR_ENABLE | \
|
|
SDRAM_INITPLR_IMWT_ENCODE(26) | \
|
|
SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_REFRESH))
|
|
#define CONFIG_SYS_SDRAM0_INITPLR9 (SDRAM_INITPLR_ENABLE | \
|
|
SDRAM_INITPLR_IMWT_ENCODE(26) | \
|
|
SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_REFRESH))
|
|
#define CONFIG_SYS_SDRAM0_INITPLR10 (SDRAM_INITPLR_ENABLE | \
|
|
SDRAM_INITPLR_IMWT_ENCODE(26) | \
|
|
SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_REFRESH))
|
|
#define CONFIG_SYS_SDRAM0_INITPLR11 (SDRAM_INITPLR_ENABLE | \
|
|
SDRAM_INITPLR_IMWT_ENCODE(2) | \
|
|
SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR) | \
|
|
SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_MR) | \
|
|
SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_MR_WR_DDR2_3_CYC | \
|
|
JEDEC_MA_MR_CL_DDR2_4_0_CLK | \
|
|
JEDEC_MA_MR_BLEN_4))
|
|
#define CONFIG_SYS_SDRAM0_INITPLR12 (SDRAM_INITPLR_ENABLE | \
|
|
SDRAM_INITPLR_IMWT_ENCODE(2) | \
|
|
SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR) | \
|
|
SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_EMR) | \
|
|
SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_EMR_OCD_ENTER | \
|
|
JEDEC_MA_EMR_RDQS_DISABLE | \
|
|
JEDEC_MA_EMR_DQS_DISABLE | \
|
|
JEDEC_MA_EMR_RTT_DISABLED | \
|
|
JEDEC_MA_EMR_ODS_NORMAL))
|
|
#define CONFIG_SYS_SDRAM0_INITPLR13 (SDRAM_INITPLR_ENABLE | \
|
|
SDRAM_INITPLR_IMWT_ENCODE(2) | \
|
|
SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR) | \
|
|
SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_EMR) | \
|
|
SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_EMR_OCD_EXIT | \
|
|
JEDEC_MA_EMR_RDQS_DISABLE | \
|
|
JEDEC_MA_EMR_DQS_DISABLE | \
|
|
JEDEC_MA_EMR_RTT_DISABLED | \
|
|
JEDEC_MA_EMR_ODS_NORMAL))
|
|
#define CONFIG_SYS_SDRAM0_INITPLR14 (SDRAM_INITPLR_DISABLE)
|
|
#define CONFIG_SYS_SDRAM0_INITPLR15 (SDRAM_INITPLR_DISABLE)
|
|
#define CONFIG_SYS_SDRAM0_RQDC (SDRAM_RQDC_RQDE_ENABLE | \
|
|
SDRAM_RQDC_RQFD_ENCODE(56))
|
|
#define CONFIG_SYS_SDRAM0_RFDC SDRAM_RFDC_RFFD_ENCODE(521)
|
|
#define CONFIG_SYS_SDRAM0_RDCC (SDRAM_RDCC_RDSS_T2)
|
|
#define CONFIG_SYS_SDRAM0_DLCR (SDRAM_DLCR_DCLM_AUTO | \
|
|
SDRAM_DLCR_DLCS_CONT_DONE | \
|
|
SDRAM_DLCR_DLCV_ENCODE(165))
|
|
#define CONFIG_SYS_SDRAM0_CLKTR (SDRAM_CLKTR_CLKP_180_DEG_ADV)
|
|
#define CONFIG_SYS_SDRAM0_WRDTR 0x00000000
|
|
#define CONFIG_SYS_SDRAM0_SDTR1 (SDRAM_SDTR1_LDOF_2_CLK | \
|
|
SDRAM_SDTR1_RTW_2_CLK | \
|
|
SDRAM_SDTR1_RTRO_1_CLK)
|
|
#define CONFIG_SYS_SDRAM0_SDTR2 (SDRAM_SDTR2_RCD_3_CLK | \
|
|
SDRAM_SDTR2_WTR_2_CLK | \
|
|
SDRAM_SDTR2_XSNR_32_CLK | \
|
|
SDRAM_SDTR2_WPC_4_CLK | \
|
|
SDRAM_SDTR2_RPC_2_CLK | \
|
|
SDRAM_SDTR2_RP_3_CLK | \
|
|
SDRAM_SDTR2_RRD_2_CLK)
|
|
#define CONFIG_SYS_SDRAM0_SDTR3 (SDRAM_SDTR3_RAS_ENCODE(8) | \
|
|
SDRAM_SDTR3_RC_ENCODE(11) | \
|
|
SDRAM_SDTR3_XCS | \
|
|
SDRAM_SDTR3_RFC_ENCODE(26))
|
|
#define CONFIG_SYS_SDRAM0_MMODE (SDRAM_MMODE_WR_DDR2_3_CYC | \
|
|
SDRAM_MMODE_DCL_DDR2_4_0_CLK | \
|
|
SDRAM_MMODE_BLEN_4)
|
|
#define CONFIG_SYS_SDRAM0_MEMODE (SDRAM_MEMODE_DQS_DISABLE | \
|
|
SDRAM_MEMODE_RTT_75OHM)
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* I2C
|
|
*----------------------------------------------------------------------*/
|
|
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
|
|
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 /* I2C boot EEPROM (24C02BN) */
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
|
|
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
|
|
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
|
|
|
|
/* I2C bootstrap EEPROM */
|
|
#define CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR 0x52
|
|
#define CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET 0
|
|
#define CONFIG_4xx_CONFIG_BLOCKSIZE 16
|
|
|
|
/* Standard DTT sensor configuration */
|
|
#define CONFIG_DTT_DS1775 1
|
|
#define CONFIG_DTT_SENSORS { 0 }
|
|
#define CONFIG_SYS_I2C_DTT_ADDR 0x48
|
|
|
|
/* RTC configuration */
|
|
#define CONFIG_RTC_DS1338 1
|
|
#define CONFIG_SYS_I2C_RTC_ADDR 0x68
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Ethernet
|
|
*----------------------------------------------------------------------*/
|
|
#define CONFIG_M88E1111_PHY 1
|
|
#define CONFIG_IBM_EMAC4_V4 1
|
|
#define CONFIG_EMAC_PHY_MODE EMAC_PHY_MODE_RGMII_RGMII
|
|
#define CONFIG_PHY_ADDR 1 /* PHY address, See schematics */
|
|
|
|
#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
|
|
#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
|
|
|
|
#define CONFIG_HAS_ETH0 1
|
|
|
|
#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */
|
|
#define CONFIG_PHY1_ADDR 2
|
|
|
|
/* Debug messages for the DDR autocalibration */
|
|
#define CONFIG_AUTOCALIB "silent\0" /* default is non-verbose */
|
|
|
|
/*
|
|
* Default environment variables
|
|
*/
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
CONFIG_AMCC_DEF_ENV \
|
|
CONFIG_AMCC_DEF_ENV_POWERPC \
|
|
CONFIG_AMCC_DEF_ENV_PPC_OLD \
|
|
CONFIG_AMCC_DEF_ENV_NOR_UPD \
|
|
CONFIG_AMCC_DEF_ENV_NAND_UPD \
|
|
"logversion=2\0" \
|
|
"kernel_addr=fc000000\0" \
|
|
"fdt_addr=fc1e0000\0" \
|
|
"ramdisk_addr=fc200000\0" \
|
|
"pciconfighost=1\0" \
|
|
"pcie_mode=RP:RP\0" \
|
|
""
|
|
|
|
/*
|
|
* Commands additional to the ones defined in amcc-common.h
|
|
*/
|
|
#define CONFIG_CMD_CHIP_CONFIG
|
|
#define CONFIG_CMD_DATE
|
|
#define CONFIG_CMD_LOG
|
|
#define CONFIG_CMD_NAND
|
|
#define CONFIG_CMD_PCI
|
|
#define CONFIG_CMD_SNTP
|
|
|
|
/*
|
|
* Don't run the memory POST on the NAND-booting version. It will
|
|
* overwrite part of the U-Boot image which is already loaded from NAND
|
|
* to SDRAM.
|
|
*/
|
|
#if defined(CONFIG_NAND_U_BOOT)
|
|
#define CONFIG_SYS_POST_MEMORY_ON 0
|
|
#else
|
|
#define CONFIG_SYS_POST_MEMORY_ON CONFIG_SYS_POST_MEMORY
|
|
#endif
|
|
|
|
/* POST support */
|
|
#define CONFIG_POST (CONFIG_SYS_POST_CACHE | \
|
|
CONFIG_SYS_POST_CPU | \
|
|
CONFIG_SYS_POST_ETHER | \
|
|
CONFIG_SYS_POST_I2C | \
|
|
CONFIG_SYS_POST_MEMORY_ON | \
|
|
CONFIG_SYS_POST_UART)
|
|
|
|
/* Define here the base-addresses of the UARTs to test in POST */
|
|
#define CONFIG_SYS_POST_UART_TABLE { CONFIG_SYS_NS16550_COM1, \
|
|
CONFIG_SYS_NS16550_COM2 }
|
|
|
|
#define CONFIG_LOGBUFFER
|
|
#define CONFIG_SYS_POST_CACHE_ADDR 0x00800000 /* free virtual address */
|
|
|
|
#define CONFIG_SYS_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* PCI stuff
|
|
*----------------------------------------------------------------------*/
|
|
#define CONFIG_PCI /* include pci support */
|
|
#define CONFIG_PCI_PNP 1 /* do pci plug-and-play */
|
|
#define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */
|
|
#define CONFIG_PCI_CONFIG_HOST_BRIDGE
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* PCIe stuff
|
|
*----------------------------------------------------------------------*/
|
|
#define CONFIG_SYS_PCIE_MEMBASE 0x90000000 /* mapped PCIe memory */
|
|
#define CONFIG_SYS_PCIE_MEMSIZE 0x08000000 /* 128 Meg, smallest incr per port */
|
|
|
|
#define CONFIG_SYS_PCIE0_CFGBASE 0xa0000000 /* remote access */
|
|
#define CONFIG_SYS_PCIE0_XCFGBASE 0xb0000000 /* local access */
|
|
#define CONFIG_SYS_PCIE0_CFGMASK 0xe0000001 /* 512 Meg */
|
|
|
|
#define CONFIG_SYS_PCIE1_CFGBASE 0xc0000000 /* remote access */
|
|
#define CONFIG_SYS_PCIE1_XCFGBASE 0xd0000000 /* local access */
|
|
#define CONFIG_SYS_PCIE1_CFGMASK 0xe0000001 /* 512 Meg */
|
|
|
|
#define CONFIG_SYS_PCIE0_UTLBASE 0xef502000
|
|
#define CONFIG_SYS_PCIE1_UTLBASE 0xef503000
|
|
|
|
/* base address of inbound PCIe window */
|
|
#define CONFIG_SYS_PCIE_INBOUND_BASE 0x0000000000000000ULL
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* External Bus Controller (EBC) Setup
|
|
*----------------------------------------------------------------------*/
|
|
#if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
|
|
/* booting from NAND, so NAND chips select has to be on CS 0 */
|
|
#define CONFIG_SYS_NAND_CS 0 /* NAND chip connected to CSx */
|
|
|
|
/* Memory Bank 1 (NOR-FLASH) initialization */
|
|
#define CONFIG_SYS_EBC_PB1AP 0x05806500
|
|
#define CONFIG_SYS_EBC_PB1CR 0xFC0DA000 /* BAS=0xFC0,BS=64MB,BU=R/W,BW=16bit*/
|
|
|
|
/* Memory Bank 0 (NAND-FLASH) initialization */
|
|
#define CONFIG_SYS_EBC_PB0AP 0x018003c0
|
|
#define CONFIG_SYS_EBC_PB0CR (CONFIG_SYS_NAND_ADDR | 0x1e000)
|
|
#else
|
|
#define CONFIG_SYS_NAND_CS 1 /* NAND chip connected to CSx */
|
|
|
|
/* Memory Bank 0 (NOR-FLASH) initialization */
|
|
#define CONFIG_SYS_EBC_PB0AP 0x05806500
|
|
#define CONFIG_SYS_EBC_PB0CR 0xFC0DA000 /* BAS=0xFC0,BS=64MB,BU=R/W,BW=16bit*/
|
|
|
|
/* Memory Bank 1 (NAND-FLASH) initialization */
|
|
#define CONFIG_SYS_EBC_PB1AP 0x018003c0
|
|
#define CONFIG_SYS_EBC_PB1CR (CONFIG_SYS_NAND_ADDR | 0x1e000)
|
|
#endif
|
|
|
|
/* Memory Bank 2 (FPGA) initialization */
|
|
#define CONFIG_SYS_EBC_PB2AP (EBC_BXAP_BME_ENABLED | \
|
|
EBC_BXAP_FWT_ENCODE(6) | \
|
|
EBC_BXAP_BWT_ENCODE(1) | \
|
|
EBC_BXAP_BCE_DISABLE | \
|
|
EBC_BXAP_BCT_2TRANS | \
|
|
EBC_BXAP_CSN_ENCODE(0) | \
|
|
EBC_BXAP_OEN_ENCODE(0) | \
|
|
EBC_BXAP_WBN_ENCODE(3) | \
|
|
EBC_BXAP_WBF_ENCODE(1) | \
|
|
EBC_BXAP_TH_ENCODE(4) | \
|
|
EBC_BXAP_RE_DISABLED | \
|
|
EBC_BXAP_SOR_DELAYED | \
|
|
EBC_BXAP_BEM_WRITEONLY | \
|
|
EBC_BXAP_PEN_DISABLED)
|
|
#define CONFIG_SYS_EBC_PB2CR (CONFIG_SYS_FPGA_BASE | 0x18000)
|
|
|
|
#define CONFIG_SYS_EBC_CFG 0x7FC00000 /* EBC0_CFG */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* GPIO Setup
|
|
*----------------------------------------------------------------------*/
|
|
#define CONFIG_SYS_4xx_GPIO_TABLE { /* Out GPIO Alternate1 Alternate2 Alternate3 */ \
|
|
{ \
|
|
/* GPIO Core 0 */ \
|
|
{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO0 EBC_DATA_PAR(0) */ \
|
|
{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO1 EBC_DATA_PAR(1) */ \
|
|
{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO2 EBC_DATA_PAR(2) */ \
|
|
{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO3 EBC_DATA_PAR(3) */ \
|
|
{GPIO0_BASE, GPIO_BI, GPIO_ALT2, GPIO_OUT_0}, /* GPIO4 EBC_DATA(20) USB2_DATA(4) */ \
|
|
{GPIO0_BASE, GPIO_BI, GPIO_ALT2, GPIO_OUT_0}, /* GPIO5 EBC_DATA(21) USB2_DATA(5) */ \
|
|
{GPIO0_BASE, GPIO_BI, GPIO_ALT2, GPIO_OUT_0}, /* GPIO6 EBC_DATA(22) USB2_DATA(6) */ \
|
|
{GPIO0_BASE, GPIO_BI, GPIO_ALT2, GPIO_OUT_0}, /* GPIO7 EBC_DATA(23) USB2_DATA(7) */ \
|
|
{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO8 CS(1)/NFCE(1) IRQ(7) */ \
|
|
{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO9 CS(2)/NFCE(2) IRQ(8) */ \
|
|
{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO10 CS(3)/NFCE(3) IRQ(9) */ \
|
|
{GPIO0_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_0}, /* GPIO11 IRQ(6) */ \
|
|
{GPIO0_BASE, GPIO_BI, GPIO_ALT2, GPIO_OUT_0}, /* GPIO12 EBC_DATA(16) USB2_DATA(0) */ \
|
|
{GPIO0_BASE, GPIO_BI, GPIO_ALT2, GPIO_OUT_0}, /* GPIO13 EBC_DATA(17) USB2_DATA(1) */ \
|
|
{GPIO0_BASE, GPIO_BI, GPIO_ALT2, GPIO_OUT_0}, /* GPIO14 EBC_DATA(18) USB2_DATA(2) */ \
|
|
{GPIO0_BASE, GPIO_BI, GPIO_ALT2, GPIO_OUT_0}, /* GPIO15 EBC_DATA(19) USB2_DATA(3) */ \
|
|
{GPIO0_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_0}, /* GPIO16 UART0_DCD UART1_CTS */ \
|
|
{GPIO0_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_0}, /* GPIO17 UART0_DSR UART1_RTS */ \
|
|
{GPIO0_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_0}, /* GPIO18 UART0_CTS */ \
|
|
{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO19 UART0_RTS */ \
|
|
{GPIO0_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_0}, /* GPIO20 UART0_DTR UART1_TX */ \
|
|
{GPIO0_BASE, GPIO_IN, GPIO_ALT2, GPIO_OUT_0}, /* GPIO21 UART0_RI UART1_RX */ \
|
|
{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO22 EBC_HOLD_REQ DMA_ACK2 */ \
|
|
{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO23 EBC_HOLD_ACK DMA_REQ2 */ \
|
|
{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO24 EBC_EXT_REQ DMA_EOT2 IRQ(4) */ \
|
|
{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO25 EBC_EXT_ACK DMA_ACK3 IRQ(3) */ \
|
|
{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO26 EBC_ADDR(5) DMA_EOT0 TS(3) */ \
|
|
{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO27 EBC_BUS_REQ DMA_EOT3 IRQ(5) */ \
|
|
{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO28 */ \
|
|
{GPIO0_BASE, GPIO_IN, GPIO_ALT2, GPIO_OUT_0}, /* GPIO29 DMA_EOT1 IRQ(2) */ \
|
|
{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO30 DMA_REQ1 IRQ(1) */ \
|
|
{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0}, /* GPIO31 DMA_ACK1 IRQ(0) */ \
|
|
} \
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Some Kilauea stuff..., mainly fpga registers
|
|
*/
|
|
#define CONFIG_SYS_FPGA_REG_BASE CONFIG_SYS_FPGA_BASE
|
|
#define CONFIG_SYS_FPGA_FIFO_BASE (CONFIG_SYS_FPGA_BASE | (1 << 10))
|
|
|
|
/* interrupt */
|
|
#define CONFIG_SYS_FPGA_SLIC0_R_DPRAM_INT 0x80000000
|
|
#define CONFIG_SYS_FPGA_SLIC0_W_DPRAM_INT 0x40000000
|
|
#define CONFIG_SYS_FPGA_SLIC1_R_DPRAM_INT 0x20000000
|
|
#define CONFIG_SYS_FPGA_SLIC1_W_DPRAM_INT 0x10000000
|
|
#define CONFIG_SYS_FPGA_PHY0_INT 0x08000000
|
|
#define CONFIG_SYS_FPGA_PHY1_INT 0x04000000
|
|
#define CONFIG_SYS_FPGA_SLIC0_INT 0x02000000
|
|
#define CONFIG_SYS_FPGA_SLIC1_INT 0x01000000
|
|
|
|
/* DPRAM setting */
|
|
/* 00: 32B; 01: 64B; 10: 128B; 11: 256B */
|
|
#define CONFIG_SYS_FPGA_DPRAM_R_INT_LINE 0x00400000 /* 64 B */
|
|
#define CONFIG_SYS_FPGA_DPRAM_W_INT_LINE 0x00100000 /* 64 B */
|
|
#define CONFIG_SYS_FPGA_DPRAM_RW_TYPE 0x00080000
|
|
#define CONFIG_SYS_FPGA_DPRAM_RST 0x00040000
|
|
#define CONFIG_SYS_FPGA_UART0_FO 0x00020000
|
|
#define CONFIG_SYS_FPGA_UART1_FO 0x00010000
|
|
|
|
/* loopback */
|
|
#define CONFIG_SYS_FPGA_CHIPSIDE_LOOPBACK 0x00004000
|
|
#define CONFIG_SYS_FPGA_LINESIDE_LOOPBACK 0x00008000
|
|
#define CONFIG_SYS_FPGA_SLIC0_ENABLE 0x00002000
|
|
#define CONFIG_SYS_FPGA_SLIC1_ENABLE 0x00001000
|
|
#define CONFIG_SYS_FPGA_SLIC0_CS 0x00000800
|
|
#define CONFIG_SYS_FPGA_SLIC1_CS 0x00000400
|
|
#define CONFIG_SYS_FPGA_USER_LED0 0x00000200
|
|
#define CONFIG_SYS_FPGA_USER_LED1 0x00000100
|
|
|
|
#define CONFIG_SYS_FPGA_MAGIC_MASK 0xffff0000
|
|
#define CONFIG_SYS_FPGA_MAGIC 0xabcd0000
|
|
#define CONFIG_SYS_FPGA_VER_MASK 0x0000ff00
|
|
|
|
#endif /* __CONFIG_H */
|