mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-31 14:28:52 +09:00
![Peng Fan](/assets/img/avatar_default.png)
Drop board_ehci_power when dm usb used and switch to use regulator api to handle vbus. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Marek Vasut <marex@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Stefano Babic <sbabic@denx.de>
570 lines
14 KiB
C
570 lines
14 KiB
C
/*
|
|
* Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
|
|
* Copyright (C) 2010 Freescale Semiconductor, Inc.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <usb.h>
|
|
#include <errno.h>
|
|
#include <wait_bit.h>
|
|
#include <linux/compiler.h>
|
|
#include <usb/ehci-ci.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/imx-regs.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/imx-common/iomux-v3.h>
|
|
#include <asm/imx-common/sys_proto.h>
|
|
#include <dm.h>
|
|
#include <power/regulator.h>
|
|
|
|
#include "ehci.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#define USB_OTGREGS_OFFSET 0x000
|
|
#define USB_H1REGS_OFFSET 0x200
|
|
#define USB_H2REGS_OFFSET 0x400
|
|
#define USB_H3REGS_OFFSET 0x600
|
|
#define USB_OTHERREGS_OFFSET 0x800
|
|
|
|
#define USB_H1_CTRL_OFFSET 0x04
|
|
|
|
#define USBPHY_CTRL 0x00000030
|
|
#define USBPHY_CTRL_SET 0x00000034
|
|
#define USBPHY_CTRL_CLR 0x00000038
|
|
#define USBPHY_CTRL_TOG 0x0000003c
|
|
|
|
#define USBPHY_PWD 0x00000000
|
|
#define USBPHY_CTRL_SFTRST 0x80000000
|
|
#define USBPHY_CTRL_CLKGATE 0x40000000
|
|
#define USBPHY_CTRL_ENUTMILEVEL3 0x00008000
|
|
#define USBPHY_CTRL_ENUTMILEVEL2 0x00004000
|
|
#define USBPHY_CTRL_OTG_ID 0x08000000
|
|
|
|
#define ANADIG_USB2_CHRG_DETECT_EN_B 0x00100000
|
|
#define ANADIG_USB2_CHRG_DETECT_CHK_CHRG_B 0x00080000
|
|
|
|
#define ANADIG_USB2_PLL_480_CTRL_BYPASS 0x00010000
|
|
#define ANADIG_USB2_PLL_480_CTRL_ENABLE 0x00002000
|
|
#define ANADIG_USB2_PLL_480_CTRL_POWER 0x00001000
|
|
#define ANADIG_USB2_PLL_480_CTRL_EN_USB_CLKS 0x00000040
|
|
|
|
#define USBNC_OFFSET 0x200
|
|
#define USBNC_PHY_STATUS_OFFSET 0x23C
|
|
#define USBNC_PHYSTATUS_ID_DIG (1 << 4) /* otg_id status */
|
|
#define USBNC_PHYCFG2_ACAENB (1 << 4) /* otg_id detection enable */
|
|
#define UCTRL_PWR_POL (1 << 9) /* OTG Polarity of Power Pin */
|
|
#define UCTRL_OVER_CUR_POL (1 << 8) /* OTG Polarity of Overcurrent */
|
|
#define UCTRL_OVER_CUR_DIS (1 << 7) /* Disable OTG Overcurrent Detection */
|
|
|
|
/* USBCMD */
|
|
#define UCMD_RUN_STOP (1 << 0) /* controller run/stop */
|
|
#define UCMD_RESET (1 << 1) /* controller reset */
|
|
|
|
#if defined(CONFIG_MX6)
|
|
static const unsigned phy_bases[] = {
|
|
USB_PHY0_BASE_ADDR,
|
|
USB_PHY1_BASE_ADDR,
|
|
};
|
|
|
|
static void usb_internal_phy_clock_gate(int index, int on)
|
|
{
|
|
void __iomem *phy_reg;
|
|
|
|
if (index >= ARRAY_SIZE(phy_bases))
|
|
return;
|
|
|
|
phy_reg = (void __iomem *)phy_bases[index];
|
|
phy_reg += on ? USBPHY_CTRL_CLR : USBPHY_CTRL_SET;
|
|
writel(USBPHY_CTRL_CLKGATE, phy_reg);
|
|
}
|
|
|
|
static void usb_power_config(int index)
|
|
{
|
|
struct anatop_regs __iomem *anatop =
|
|
(struct anatop_regs __iomem *)ANATOP_BASE_ADDR;
|
|
void __iomem *chrg_detect;
|
|
void __iomem *pll_480_ctrl_clr;
|
|
void __iomem *pll_480_ctrl_set;
|
|
|
|
switch (index) {
|
|
case 0:
|
|
chrg_detect = &anatop->usb1_chrg_detect;
|
|
pll_480_ctrl_clr = &anatop->usb1_pll_480_ctrl_clr;
|
|
pll_480_ctrl_set = &anatop->usb1_pll_480_ctrl_set;
|
|
break;
|
|
case 1:
|
|
chrg_detect = &anatop->usb2_chrg_detect;
|
|
pll_480_ctrl_clr = &anatop->usb2_pll_480_ctrl_clr;
|
|
pll_480_ctrl_set = &anatop->usb2_pll_480_ctrl_set;
|
|
break;
|
|
default:
|
|
return;
|
|
}
|
|
/*
|
|
* Some phy and power's special controls
|
|
* 1. The external charger detector needs to be disabled
|
|
* or the signal at DP will be poor
|
|
* 2. The PLL's power and output to usb
|
|
* is totally controlled by IC, so the Software only needs
|
|
* to enable them at initializtion.
|
|
*/
|
|
writel(ANADIG_USB2_CHRG_DETECT_EN_B |
|
|
ANADIG_USB2_CHRG_DETECT_CHK_CHRG_B,
|
|
chrg_detect);
|
|
|
|
writel(ANADIG_USB2_PLL_480_CTRL_BYPASS,
|
|
pll_480_ctrl_clr);
|
|
|
|
writel(ANADIG_USB2_PLL_480_CTRL_ENABLE |
|
|
ANADIG_USB2_PLL_480_CTRL_POWER |
|
|
ANADIG_USB2_PLL_480_CTRL_EN_USB_CLKS,
|
|
pll_480_ctrl_set);
|
|
}
|
|
|
|
/* Return 0 : host node, <>0 : device mode */
|
|
static int usb_phy_enable(int index, struct usb_ehci *ehci)
|
|
{
|
|
void __iomem *phy_reg;
|
|
void __iomem *phy_ctrl;
|
|
void __iomem *usb_cmd;
|
|
int ret;
|
|
|
|
if (index >= ARRAY_SIZE(phy_bases))
|
|
return 0;
|
|
|
|
phy_reg = (void __iomem *)phy_bases[index];
|
|
phy_ctrl = (void __iomem *)(phy_reg + USBPHY_CTRL);
|
|
usb_cmd = (void __iomem *)&ehci->usbcmd;
|
|
|
|
/* Stop then Reset */
|
|
clrbits_le32(usb_cmd, UCMD_RUN_STOP);
|
|
ret = wait_for_bit(__func__, usb_cmd, UCMD_RUN_STOP, false, 10000,
|
|
false);
|
|
if (ret)
|
|
return ret;
|
|
|
|
setbits_le32(usb_cmd, UCMD_RESET);
|
|
ret = wait_for_bit(__func__, usb_cmd, UCMD_RESET, false, 10000, false);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Reset USBPHY module */
|
|
setbits_le32(phy_ctrl, USBPHY_CTRL_SFTRST);
|
|
udelay(10);
|
|
|
|
/* Remove CLKGATE and SFTRST */
|
|
clrbits_le32(phy_ctrl, USBPHY_CTRL_CLKGATE | USBPHY_CTRL_SFTRST);
|
|
udelay(10);
|
|
|
|
/* Power up the PHY */
|
|
writel(0, phy_reg + USBPHY_PWD);
|
|
/* enable FS/LS device */
|
|
setbits_le32(phy_ctrl, USBPHY_CTRL_ENUTMILEVEL2 |
|
|
USBPHY_CTRL_ENUTMILEVEL3);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int usb_phy_mode(int port)
|
|
{
|
|
void __iomem *phy_reg;
|
|
void __iomem *phy_ctrl;
|
|
u32 val;
|
|
|
|
phy_reg = (void __iomem *)phy_bases[port];
|
|
phy_ctrl = (void __iomem *)(phy_reg + USBPHY_CTRL);
|
|
|
|
val = readl(phy_ctrl);
|
|
|
|
if (val & USBPHY_CTRL_OTG_ID)
|
|
return USB_INIT_DEVICE;
|
|
else
|
|
return USB_INIT_HOST;
|
|
}
|
|
|
|
/* Base address for this IP block is 0x02184800 */
|
|
struct usbnc_regs {
|
|
u32 ctrl[4]; /* otg/host1-3 */
|
|
u32 uh2_hsic_ctrl;
|
|
u32 uh3_hsic_ctrl;
|
|
u32 otg_phy_ctrl_0;
|
|
u32 uh1_phy_ctrl_0;
|
|
};
|
|
#elif defined(CONFIG_MX7)
|
|
struct usbnc_regs {
|
|
u32 ctrl1;
|
|
u32 ctrl2;
|
|
u32 reserve1[10];
|
|
u32 phy_cfg1;
|
|
u32 phy_cfg2;
|
|
u32 reserve2;
|
|
u32 phy_status;
|
|
u32 reserve3[4];
|
|
u32 adp_cfg1;
|
|
u32 adp_cfg2;
|
|
u32 adp_status;
|
|
};
|
|
|
|
static void usb_power_config(int index)
|
|
{
|
|
struct usbnc_regs *usbnc = (struct usbnc_regs *)(USB_BASE_ADDR +
|
|
(0x10000 * index) + USBNC_OFFSET);
|
|
void __iomem *phy_cfg2 = (void __iomem *)(&usbnc->phy_cfg2);
|
|
void __iomem *ctrl = (void __iomem *)(&usbnc->ctrl1);
|
|
|
|
/*
|
|
* Clear the ACAENB to enable usb_otg_id detection,
|
|
* otherwise it is the ACA detection enabled.
|
|
*/
|
|
clrbits_le32(phy_cfg2, USBNC_PHYCFG2_ACAENB);
|
|
|
|
/* Set power polarity to high active */
|
|
#ifdef CONFIG_MXC_USB_OTG_HACTIVE
|
|
setbits_le32(ctrl, UCTRL_PWR_POL);
|
|
#else
|
|
clrbits_le32(ctrl, UCTRL_PWR_POL);
|
|
#endif
|
|
}
|
|
|
|
int usb_phy_mode(int port)
|
|
{
|
|
struct usbnc_regs *usbnc = (struct usbnc_regs *)(USB_BASE_ADDR +
|
|
(0x10000 * port) + USBNC_OFFSET);
|
|
void __iomem *status = (void __iomem *)(&usbnc->phy_status);
|
|
u32 val;
|
|
|
|
val = readl(status);
|
|
|
|
if (val & USBNC_PHYSTATUS_ID_DIG)
|
|
return USB_INIT_DEVICE;
|
|
else
|
|
return USB_INIT_HOST;
|
|
}
|
|
#endif
|
|
|
|
static void usb_oc_config(int index)
|
|
{
|
|
#if defined(CONFIG_MX6)
|
|
struct usbnc_regs *usbnc = (struct usbnc_regs *)(USB_BASE_ADDR +
|
|
USB_OTHERREGS_OFFSET);
|
|
void __iomem *ctrl = (void __iomem *)(&usbnc->ctrl[index]);
|
|
#elif defined(CONFIG_MX7)
|
|
struct usbnc_regs *usbnc = (struct usbnc_regs *)(USB_BASE_ADDR +
|
|
(0x10000 * index) + USBNC_OFFSET);
|
|
void __iomem *ctrl = (void __iomem *)(&usbnc->ctrl1);
|
|
#endif
|
|
|
|
#if CONFIG_MACH_TYPE == MACH_TYPE_MX6Q_ARM2
|
|
/* mx6qarm2 seems to required a different setting*/
|
|
clrbits_le32(ctrl, UCTRL_OVER_CUR_POL);
|
|
#else
|
|
setbits_le32(ctrl, UCTRL_OVER_CUR_POL);
|
|
#endif
|
|
|
|
setbits_le32(ctrl, UCTRL_OVER_CUR_DIS);
|
|
}
|
|
|
|
/**
|
|
* board_usb_phy_mode - override usb phy mode
|
|
* @port: usb host/otg port
|
|
*
|
|
* Target board specific, override usb_phy_mode.
|
|
* When usb-otg is used as usb host port, iomux pad usb_otg_id can be
|
|
* left disconnected in this case usb_phy_mode will not be able to identify
|
|
* the phy mode that usb port is used.
|
|
* Machine file overrides board_usb_phy_mode.
|
|
*
|
|
* Return: USB_INIT_DEVICE or USB_INIT_HOST
|
|
*/
|
|
int __weak board_usb_phy_mode(int port)
|
|
{
|
|
return usb_phy_mode(port);
|
|
}
|
|
|
|
/**
|
|
* board_ehci_hcd_init - set usb vbus voltage
|
|
* @port: usb otg port
|
|
*
|
|
* Target board specific, setup iomux pad to setup supply vbus voltage
|
|
* for usb otg port. Machine board file overrides board_ehci_hcd_init
|
|
*
|
|
* Return: 0 Success
|
|
*/
|
|
int __weak board_ehci_hcd_init(int port)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* board_ehci_power - enables/disables usb vbus voltage
|
|
* @port: usb otg port
|
|
* @on: on/off vbus voltage
|
|
*
|
|
* Enables/disables supply vbus voltage for usb otg port.
|
|
* Machine board file overrides board_ehci_power
|
|
*
|
|
* Return: 0 Success
|
|
*/
|
|
int __weak board_ehci_power(int port, int on)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
int ehci_mx6_common_init(struct usb_ehci *ehci, int index)
|
|
{
|
|
int ret;
|
|
|
|
enable_usboh3_clk(1);
|
|
mdelay(1);
|
|
|
|
/* Do board specific initialization */
|
|
ret = board_ehci_hcd_init(index);
|
|
if (ret)
|
|
return ret;
|
|
|
|
usb_power_config(index);
|
|
usb_oc_config(index);
|
|
|
|
#if defined(CONFIG_MX6)
|
|
usb_internal_phy_clock_gate(index, 1);
|
|
usb_phy_enable(index, ehci);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifndef CONFIG_DM_USB
|
|
int ehci_hcd_init(int index, enum usb_init_type init,
|
|
struct ehci_hccr **hccr, struct ehci_hcor **hcor)
|
|
{
|
|
enum usb_init_type type;
|
|
#if defined(CONFIG_MX6)
|
|
u32 controller_spacing = 0x200;
|
|
#elif defined(CONFIG_MX7)
|
|
u32 controller_spacing = 0x10000;
|
|
#endif
|
|
struct usb_ehci *ehci = (struct usb_ehci *)(USB_BASE_ADDR +
|
|
(controller_spacing * index));
|
|
int ret;
|
|
|
|
if (index > 3)
|
|
return -EINVAL;
|
|
|
|
ret = ehci_mx6_common_init(ehci, index);
|
|
if (ret)
|
|
return ret;
|
|
|
|
type = board_usb_phy_mode(index);
|
|
|
|
if (hccr && hcor) {
|
|
*hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength);
|
|
*hcor = (struct ehci_hcor *)((uint32_t)*hccr +
|
|
HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
|
|
}
|
|
|
|
if ((type == init) || (type == USB_INIT_DEVICE))
|
|
board_ehci_power(index, (type == USB_INIT_DEVICE) ? 0 : 1);
|
|
if (type != init)
|
|
return -ENODEV;
|
|
if (type == USB_INIT_DEVICE)
|
|
return 0;
|
|
|
|
setbits_le32(&ehci->usbmode, CM_HOST);
|
|
writel(CONFIG_MXC_USB_PORTSC, &ehci->portsc);
|
|
setbits_le32(&ehci->portsc, USB_EN);
|
|
|
|
mdelay(10);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int ehci_hcd_stop(int index)
|
|
{
|
|
return 0;
|
|
}
|
|
#else
|
|
struct ehci_mx6_priv_data {
|
|
struct ehci_ctrl ctrl;
|
|
struct usb_ehci *ehci;
|
|
struct udevice *vbus_supply;
|
|
enum usb_init_type init_type;
|
|
int portnr;
|
|
};
|
|
|
|
static int mx6_init_after_reset(struct ehci_ctrl *dev)
|
|
{
|
|
struct ehci_mx6_priv_data *priv = dev->priv;
|
|
enum usb_init_type type = priv->init_type;
|
|
struct usb_ehci *ehci = priv->ehci;
|
|
int ret;
|
|
|
|
ret = ehci_mx6_common_init(priv->ehci, priv->portnr);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (priv->vbus_supply) {
|
|
ret = regulator_set_enable(priv->vbus_supply,
|
|
(type == USB_INIT_DEVICE) ?
|
|
false : true);
|
|
if (ret) {
|
|
puts("Error enabling VBUS supply\n");
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
if (type == USB_INIT_DEVICE)
|
|
return 0;
|
|
|
|
setbits_le32(&ehci->usbmode, CM_HOST);
|
|
writel(CONFIG_MXC_USB_PORTSC, &ehci->portsc);
|
|
setbits_le32(&ehci->portsc, USB_EN);
|
|
|
|
mdelay(10);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct ehci_ops mx6_ehci_ops = {
|
|
.init_after_reset = mx6_init_after_reset
|
|
};
|
|
|
|
static int ehci_usb_phy_mode(struct udevice *dev)
|
|
{
|
|
struct usb_platdata *plat = dev_get_platdata(dev);
|
|
void *__iomem addr = (void *__iomem)dev_get_addr(dev);
|
|
void *__iomem phy_ctrl, *__iomem phy_status;
|
|
const void *blob = gd->fdt_blob;
|
|
int offset = dev->of_offset, phy_off;
|
|
u32 val;
|
|
|
|
/*
|
|
* About fsl,usbphy, Refer to
|
|
* Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt.
|
|
*/
|
|
if (is_mx6()) {
|
|
phy_off = fdtdec_lookup_phandle(blob,
|
|
offset,
|
|
"fsl,usbphy");
|
|
if (phy_off < 0)
|
|
return -EINVAL;
|
|
|
|
addr = (void __iomem *)fdtdec_get_addr(blob, phy_off,
|
|
"reg");
|
|
if ((fdt_addr_t)addr == FDT_ADDR_T_NONE)
|
|
return -EINVAL;
|
|
|
|
phy_ctrl = (void __iomem *)(addr + USBPHY_CTRL);
|
|
val = readl(phy_ctrl);
|
|
|
|
if (val & USBPHY_CTRL_OTG_ID)
|
|
plat->init_type = USB_INIT_DEVICE;
|
|
else
|
|
plat->init_type = USB_INIT_HOST;
|
|
} else if (is_mx7()) {
|
|
phy_status = (void __iomem *)(addr +
|
|
USBNC_PHY_STATUS_OFFSET);
|
|
val = readl(phy_status);
|
|
|
|
if (val & USBNC_PHYSTATUS_ID_DIG)
|
|
plat->init_type = USB_INIT_DEVICE;
|
|
else
|
|
plat->init_type = USB_INIT_HOST;
|
|
} else {
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ehci_usb_ofdata_to_platdata(struct udevice *dev)
|
|
{
|
|
struct usb_platdata *plat = dev_get_platdata(dev);
|
|
const char *mode;
|
|
|
|
mode = fdt_getprop(gd->fdt_blob, dev->of_offset, "dr_mode", NULL);
|
|
if (mode) {
|
|
if (strcmp(mode, "peripheral") == 0)
|
|
plat->init_type = USB_INIT_DEVICE;
|
|
else if (strcmp(mode, "host") == 0)
|
|
plat->init_type = USB_INIT_HOST;
|
|
else if (strcmp(mode, "otg") == 0)
|
|
return ehci_usb_phy_mode(dev);
|
|
else
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
return ehci_usb_phy_mode(dev);
|
|
}
|
|
|
|
static int ehci_usb_probe(struct udevice *dev)
|
|
{
|
|
struct usb_platdata *plat = dev_get_platdata(dev);
|
|
struct usb_ehci *ehci = (struct usb_ehci *)dev_get_addr(dev);
|
|
struct ehci_mx6_priv_data *priv = dev_get_priv(dev);
|
|
enum usb_init_type type = plat->init_type;
|
|
struct ehci_hccr *hccr;
|
|
struct ehci_hcor *hcor;
|
|
int ret;
|
|
|
|
priv->ehci = ehci;
|
|
priv->portnr = dev->seq;
|
|
priv->init_type = type;
|
|
|
|
ret = device_get_supply_regulator(dev, "vbus-supply",
|
|
&priv->vbus_supply);
|
|
if (ret)
|
|
debug("%s: No vbus supply\n", dev->name);
|
|
|
|
ret = ehci_mx6_common_init(ehci, priv->portnr);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (priv->vbus_supply) {
|
|
ret = regulator_set_enable(priv->vbus_supply,
|
|
(type == USB_INIT_DEVICE) ?
|
|
false : true);
|
|
if (ret) {
|
|
puts("Error enabling VBUS supply\n");
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
if (priv->init_type == USB_INIT_HOST) {
|
|
setbits_le32(&ehci->usbmode, CM_HOST);
|
|
writel(CONFIG_MXC_USB_PORTSC, &ehci->portsc);
|
|
setbits_le32(&ehci->portsc, USB_EN);
|
|
}
|
|
|
|
mdelay(10);
|
|
|
|
hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength);
|
|
hcor = (struct ehci_hcor *)((uint32_t)hccr +
|
|
HC_LENGTH(ehci_readl(&(hccr)->cr_capbase)));
|
|
|
|
return ehci_register(dev, hccr, hcor, &mx6_ehci_ops, 0, priv->init_type);
|
|
}
|
|
|
|
static const struct udevice_id mx6_usb_ids[] = {
|
|
{ .compatible = "fsl,imx27-usb" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(usb_mx6) = {
|
|
.name = "ehci_mx6",
|
|
.id = UCLASS_USB,
|
|
.of_match = mx6_usb_ids,
|
|
.ofdata_to_platdata = ehci_usb_ofdata_to_platdata,
|
|
.probe = ehci_usb_probe,
|
|
.remove = ehci_deregister,
|
|
.ops = &ehci_usb_ops,
|
|
.platdata_auto_alloc_size = sizeof(struct usb_platdata),
|
|
.priv_auto_alloc_size = sizeof(struct ehci_mx6_priv_data),
|
|
.flags = DM_FLAG_ALLOC_PRIV_DMA,
|
|
};
|
|
#endif
|