mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-09-08 05:43:21 +09:00
![Patrick Delaunay](/assets/img/avatar_default.png)
The DK1 and DK2 boards use the USB Type-C controller STUSB1600. This patch updates: - the device tree to add the I2C node in the DT - the board stm32mp1 to probe this I2C device and use this controller to check cable detection. - the DWC2 driver to support a new dt property "u-boot,force-b-session-valid" which forces B session and device mode; it is a workaround because the VBUS sensing and ID detection isn't available with stusb1600. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
507 lines
12 KiB
C
507 lines
12 KiB
C
// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
|
|
/*
|
|
* Copyright (C) 2018, STMicroelectronics - All Rights Reserved
|
|
*/
|
|
#include <common.h>
|
|
#include <adc.h>
|
|
#include <config.h>
|
|
#include <clk.h>
|
|
#include <dm.h>
|
|
#include <g_dnl.h>
|
|
#include <generic-phy.h>
|
|
#include <i2c.h>
|
|
#include <led.h>
|
|
#include <misc.h>
|
|
#include <phy.h>
|
|
#include <reset.h>
|
|
#include <syscon.h>
|
|
#include <usb.h>
|
|
#include <asm/io.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/arch/stm32.h>
|
|
#include <power/regulator.h>
|
|
#include <usb/dwc2_udc.h>
|
|
|
|
/* SYSCFG registers */
|
|
#define SYSCFG_BOOTR 0x00
|
|
#define SYSCFG_PMCSETR 0x04
|
|
#define SYSCFG_IOCTRLSETR 0x18
|
|
#define SYSCFG_ICNR 0x1C
|
|
#define SYSCFG_CMPCR 0x20
|
|
#define SYSCFG_CMPENSETR 0x24
|
|
#define SYSCFG_PMCCLRR 0x44
|
|
|
|
#define SYSCFG_BOOTR_BOOT_MASK GENMASK(2, 0)
|
|
#define SYSCFG_BOOTR_BOOTPD_SHIFT 4
|
|
|
|
#define SYSCFG_IOCTRLSETR_HSLVEN_TRACE BIT(0)
|
|
#define SYSCFG_IOCTRLSETR_HSLVEN_QUADSPI BIT(1)
|
|
#define SYSCFG_IOCTRLSETR_HSLVEN_ETH BIT(2)
|
|
#define SYSCFG_IOCTRLSETR_HSLVEN_SDMMC BIT(3)
|
|
#define SYSCFG_IOCTRLSETR_HSLVEN_SPI BIT(4)
|
|
|
|
#define SYSCFG_CMPCR_SW_CTRL BIT(1)
|
|
#define SYSCFG_CMPCR_READY BIT(8)
|
|
|
|
#define SYSCFG_CMPENSETR_MPU_EN BIT(0)
|
|
|
|
#define SYSCFG_PMCSETR_ETH_CLK_SEL BIT(16)
|
|
#define SYSCFG_PMCSETR_ETH_REF_CLK_SEL BIT(17)
|
|
|
|
#define SYSCFG_PMCSETR_ETH_SELMII BIT(20)
|
|
|
|
#define SYSCFG_PMCSETR_ETH_SEL_MASK GENMASK(23, 21)
|
|
#define SYSCFG_PMCSETR_ETH_SEL_GMII_MII (0 << 21)
|
|
#define SYSCFG_PMCSETR_ETH_SEL_RGMII (1 << 21)
|
|
#define SYSCFG_PMCSETR_ETH_SEL_RMII (4 << 21)
|
|
|
|
/*
|
|
* Get a global data pointer
|
|
*/
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#define USB_WARNING_LOW_THRESHOLD_UV 660000
|
|
#define USB_START_LOW_THRESHOLD_UV 1230000
|
|
#define USB_START_HIGH_THRESHOLD_UV 2100000
|
|
|
|
int checkboard(void)
|
|
{
|
|
int ret;
|
|
char *mode;
|
|
u32 otp;
|
|
struct udevice *dev;
|
|
const char *fdt_compat;
|
|
int fdt_compat_len;
|
|
|
|
if (IS_ENABLED(CONFIG_STM32MP1_TRUSTED))
|
|
mode = "trusted";
|
|
else
|
|
mode = "basic";
|
|
|
|
printf("Board: stm32mp1 in %s mode", mode);
|
|
fdt_compat = fdt_getprop(gd->fdt_blob, 0, "compatible",
|
|
&fdt_compat_len);
|
|
if (fdt_compat && fdt_compat_len)
|
|
printf(" (%s)", fdt_compat);
|
|
puts("\n");
|
|
|
|
ret = uclass_get_device_by_driver(UCLASS_MISC,
|
|
DM_GET_DRIVER(stm32mp_bsec),
|
|
&dev);
|
|
|
|
if (!ret)
|
|
ret = misc_read(dev, STM32_BSEC_SHADOW(BSEC_OTP_BOARD),
|
|
&otp, sizeof(otp));
|
|
if (!ret && otp) {
|
|
printf("Board: MB%04x Var%d Rev.%c-%02d\n",
|
|
otp >> 16,
|
|
(otp >> 12) & 0xF,
|
|
((otp >> 8) & 0xF) - 1 + 'A',
|
|
otp & 0xF);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void board_key_check(void)
|
|
{
|
|
#if defined(CONFIG_FASTBOOT) || defined(CONFIG_CMD_STM32PROG)
|
|
ofnode node;
|
|
struct gpio_desc gpio;
|
|
enum forced_boot_mode boot_mode = BOOT_NORMAL;
|
|
|
|
node = ofnode_path("/config");
|
|
if (!ofnode_valid(node)) {
|
|
debug("%s: no /config node?\n", __func__);
|
|
return;
|
|
}
|
|
#ifdef CONFIG_FASTBOOT
|
|
if (gpio_request_by_name_nodev(node, "st,fastboot-gpios", 0,
|
|
&gpio, GPIOD_IS_IN)) {
|
|
debug("%s: could not find a /config/st,fastboot-gpios\n",
|
|
__func__);
|
|
} else {
|
|
if (dm_gpio_get_value(&gpio)) {
|
|
puts("Fastboot key pressed, ");
|
|
boot_mode = BOOT_FASTBOOT;
|
|
}
|
|
|
|
dm_gpio_free(NULL, &gpio);
|
|
}
|
|
#endif
|
|
#ifdef CONFIG_CMD_STM32PROG
|
|
if (gpio_request_by_name_nodev(node, "st,stm32prog-gpios", 0,
|
|
&gpio, GPIOD_IS_IN)) {
|
|
debug("%s: could not find a /config/st,stm32prog-gpios\n",
|
|
__func__);
|
|
} else {
|
|
if (dm_gpio_get_value(&gpio)) {
|
|
puts("STM32Programmer key pressed, ");
|
|
boot_mode = BOOT_STM32PROG;
|
|
}
|
|
dm_gpio_free(NULL, &gpio);
|
|
}
|
|
#endif
|
|
|
|
if (boot_mode != BOOT_NORMAL) {
|
|
puts("entering download mode...\n");
|
|
clrsetbits_le32(TAMP_BOOT_CONTEXT,
|
|
TAMP_BOOT_FORCED_MASK,
|
|
boot_mode);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
#if defined(CONFIG_USB_GADGET) && defined(CONFIG_USB_GADGET_DWC2_OTG)
|
|
|
|
/* STMicroelectronics STUSB1600 Type-C controller */
|
|
#define STUSB1600_CC_CONNECTION_STATUS 0x0E
|
|
|
|
/* STUSB1600_CC_CONNECTION_STATUS bitfields */
|
|
#define STUSB1600_CC_ATTACH BIT(0)
|
|
|
|
static int stusb1600_init(struct udevice **dev_stusb1600)
|
|
{
|
|
ofnode node;
|
|
struct udevice *dev, *bus;
|
|
int ret;
|
|
u32 chip_addr;
|
|
|
|
*dev_stusb1600 = NULL;
|
|
|
|
/* if node stusb1600 is present, means DK1 or DK2 board */
|
|
node = ofnode_by_compatible(ofnode_null(), "st,stusb1600");
|
|
if (!ofnode_valid(node))
|
|
return -ENODEV;
|
|
|
|
ret = ofnode_read_u32(node, "reg", &chip_addr);
|
|
if (ret)
|
|
return -EINVAL;
|
|
|
|
ret = uclass_get_device_by_ofnode(UCLASS_I2C, ofnode_get_parent(node),
|
|
&bus);
|
|
if (ret) {
|
|
printf("bus for stusb1600 not found\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
ret = dm_i2c_probe(bus, chip_addr, 0, &dev);
|
|
if (!ret)
|
|
*dev_stusb1600 = dev;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int stusb1600_cable_connected(struct udevice *dev)
|
|
{
|
|
u8 status;
|
|
|
|
if (dm_i2c_read(dev, STUSB1600_CC_CONNECTION_STATUS, &status, 1))
|
|
return 0;
|
|
|
|
return status & STUSB1600_CC_ATTACH;
|
|
}
|
|
|
|
#include <usb/dwc2_udc.h>
|
|
int g_dnl_board_usb_cable_connected(void)
|
|
{
|
|
struct udevice *stusb1600;
|
|
struct udevice *dwc2_udc_otg;
|
|
int ret;
|
|
|
|
if (!stusb1600_init(&stusb1600))
|
|
return stusb1600_cable_connected(stusb1600);
|
|
|
|
ret = uclass_get_device_by_driver(UCLASS_USB_GADGET_GENERIC,
|
|
DM_GET_DRIVER(dwc2_udc_otg),
|
|
&dwc2_udc_otg);
|
|
if (!ret)
|
|
debug("dwc2_udc_otg init failed\n");
|
|
|
|
return dwc2_udc_B_session_valid(dwc2_udc_otg);
|
|
}
|
|
#endif /* CONFIG_USB_GADGET */
|
|
|
|
static int get_led(struct udevice **dev, char *led_string)
|
|
{
|
|
char *led_name;
|
|
int ret;
|
|
|
|
led_name = fdtdec_get_config_string(gd->fdt_blob, led_string);
|
|
if (!led_name) {
|
|
pr_debug("%s: could not find %s config string\n",
|
|
__func__, led_string);
|
|
return -ENOENT;
|
|
}
|
|
ret = led_get_by_label(led_name, dev);
|
|
if (ret) {
|
|
debug("%s: get=%d\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int setup_led(enum led_state_t cmd)
|
|
{
|
|
struct udevice *dev;
|
|
int ret;
|
|
|
|
ret = get_led(&dev, "u-boot,boot-led");
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = led_set_state(dev, cmd);
|
|
return ret;
|
|
}
|
|
|
|
static int board_check_usb_power(void)
|
|
{
|
|
struct ofnode_phandle_args adc_args;
|
|
struct udevice *adc;
|
|
struct udevice *led;
|
|
ofnode node;
|
|
unsigned int raw;
|
|
int max_uV = 0;
|
|
int ret, uV, adc_count;
|
|
u8 i, nb_blink;
|
|
|
|
node = ofnode_path("/config");
|
|
if (!ofnode_valid(node)) {
|
|
debug("%s: no /config node?\n", __func__);
|
|
return -ENOENT;
|
|
}
|
|
|
|
/*
|
|
* Retrieve the ADC channels devices and get measurement
|
|
* for each of them
|
|
*/
|
|
adc_count = ofnode_count_phandle_with_args(node, "st,adc_usb_pd",
|
|
"#io-channel-cells");
|
|
if (adc_count < 0) {
|
|
if (adc_count == -ENOENT)
|
|
return 0;
|
|
|
|
pr_err("%s: can't find adc channel (%d)\n", __func__,
|
|
adc_count);
|
|
|
|
return adc_count;
|
|
}
|
|
|
|
for (i = 0; i < adc_count; i++) {
|
|
if (ofnode_parse_phandle_with_args(node, "st,adc_usb_pd",
|
|
"#io-channel-cells", 0, i,
|
|
&adc_args)) {
|
|
pr_debug("%s: can't find /config/st,adc_usb_pd\n",
|
|
__func__);
|
|
return 0;
|
|
}
|
|
|
|
ret = uclass_get_device_by_ofnode(UCLASS_ADC, adc_args.node,
|
|
&adc);
|
|
|
|
if (ret) {
|
|
pr_err("%s: Can't get adc device(%d)\n", __func__,
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = adc_channel_single_shot(adc->name, adc_args.args[0],
|
|
&raw);
|
|
if (ret) {
|
|
pr_err("%s: single shot failed for %s[%d]!\n",
|
|
__func__, adc->name, adc_args.args[0]);
|
|
return ret;
|
|
}
|
|
/* Convert to uV */
|
|
if (!adc_raw_to_uV(adc, raw, &uV)) {
|
|
if (uV > max_uV)
|
|
max_uV = uV;
|
|
pr_debug("%s: %s[%02d] = %u, %d uV\n", __func__,
|
|
adc->name, adc_args.args[0], raw, uV);
|
|
} else {
|
|
pr_err("%s: Can't get uV value for %s[%d]\n",
|
|
__func__, adc->name, adc_args.args[0]);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* If highest value is inside 1.23 Volts and 2.10 Volts, that means
|
|
* board is plugged on an USB-C 3A power supply and boot process can
|
|
* continue.
|
|
*/
|
|
if (max_uV > USB_START_LOW_THRESHOLD_UV &&
|
|
max_uV < USB_START_HIGH_THRESHOLD_UV)
|
|
return 0;
|
|
|
|
/* Display warning message and make u-boot,error-led blinking */
|
|
pr_err("\n*******************************************\n");
|
|
|
|
if (max_uV < USB_WARNING_LOW_THRESHOLD_UV) {
|
|
pr_err("* WARNING 500mA power supply detected *\n");
|
|
nb_blink = 2;
|
|
} else {
|
|
pr_err("* WARNING 1.5A power supply detected *\n");
|
|
nb_blink = 3;
|
|
}
|
|
|
|
pr_err("* Current too low, use a 3A power supply! *\n");
|
|
pr_err("*******************************************\n\n");
|
|
|
|
ret = get_led(&led, "u-boot,error-led");
|
|
if (ret)
|
|
return ret;
|
|
|
|
for (i = 0; i < nb_blink * 2; i++) {
|
|
led_set_state(led, LEDST_TOGGLE);
|
|
mdelay(125);
|
|
}
|
|
led_set_state(led, LEDST_ON);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void sysconf_init(void)
|
|
{
|
|
#ifndef CONFIG_STM32MP1_TRUSTED
|
|
u8 *syscfg;
|
|
#ifdef CONFIG_DM_REGULATOR
|
|
struct udevice *pwr_dev;
|
|
struct udevice *pwr_reg;
|
|
struct udevice *dev;
|
|
int ret;
|
|
u32 otp = 0;
|
|
#endif
|
|
u32 bootr;
|
|
|
|
syscfg = (u8 *)syscon_get_first_range(STM32MP_SYSCON_SYSCFG);
|
|
|
|
/* interconnect update : select master using the port 1 */
|
|
/* LTDC = AXI_M9 */
|
|
/* GPU = AXI_M8 */
|
|
/* today information is hardcoded in U-Boot */
|
|
writel(BIT(9), syscfg + SYSCFG_ICNR);
|
|
|
|
/* disable Pull-Down for boot pin connected to VDD */
|
|
bootr = readl(syscfg + SYSCFG_BOOTR);
|
|
bootr &= ~(SYSCFG_BOOTR_BOOT_MASK << SYSCFG_BOOTR_BOOTPD_SHIFT);
|
|
bootr |= (bootr & SYSCFG_BOOTR_BOOT_MASK) << SYSCFG_BOOTR_BOOTPD_SHIFT;
|
|
writel(bootr, syscfg + SYSCFG_BOOTR);
|
|
|
|
#ifdef CONFIG_DM_REGULATOR
|
|
/* High Speed Low Voltage Pad mode Enable for SPI, SDMMC, ETH, QSPI
|
|
* and TRACE. Needed above ~50MHz and conditioned by AFMUX selection.
|
|
* The customer will have to disable this for low frequencies
|
|
* or if AFMUX is selected but the function not used, typically for
|
|
* TRACE. Otherwise, impact on power consumption.
|
|
*
|
|
* WARNING:
|
|
* enabling High Speed mode while VDD>2.7V
|
|
* with the OTP product_below_2v5 (OTP 18, BIT 13)
|
|
* erroneously set to 1 can damage the IC!
|
|
* => U-Boot set the register only if VDD < 2.7V (in DT)
|
|
* but this value need to be consistent with board design
|
|
*/
|
|
ret = syscon_get_by_driver_data(STM32MP_SYSCON_PWR, &pwr_dev);
|
|
if (!ret) {
|
|
ret = uclass_get_device_by_driver(UCLASS_MISC,
|
|
DM_GET_DRIVER(stm32mp_bsec),
|
|
&dev);
|
|
if (ret) {
|
|
pr_err("Can't find stm32mp_bsec driver\n");
|
|
return;
|
|
}
|
|
|
|
ret = misc_read(dev, STM32_BSEC_SHADOW(18), &otp, 4);
|
|
if (!ret)
|
|
otp = otp & BIT(13);
|
|
|
|
/* get VDD = pwr-supply */
|
|
ret = device_get_supply_regulator(pwr_dev, "pwr-supply",
|
|
&pwr_reg);
|
|
|
|
/* check if VDD is Low Voltage */
|
|
if (!ret) {
|
|
if (regulator_get_value(pwr_reg) < 2700000) {
|
|
writel(SYSCFG_IOCTRLSETR_HSLVEN_TRACE |
|
|
SYSCFG_IOCTRLSETR_HSLVEN_QUADSPI |
|
|
SYSCFG_IOCTRLSETR_HSLVEN_ETH |
|
|
SYSCFG_IOCTRLSETR_HSLVEN_SDMMC |
|
|
SYSCFG_IOCTRLSETR_HSLVEN_SPI,
|
|
syscfg + SYSCFG_IOCTRLSETR);
|
|
|
|
if (!otp)
|
|
pr_err("product_below_2v5=0: HSLVEN protected by HW\n");
|
|
} else {
|
|
if (otp)
|
|
pr_err("product_below_2v5=1: HSLVEN update is destructive, no update as VDD>2.7V\n");
|
|
}
|
|
} else {
|
|
debug("VDD unknown");
|
|
}
|
|
}
|
|
#endif
|
|
|
|
/* activate automatic I/O compensation
|
|
* warning: need to ensure CSI enabled and ready in clock driver
|
|
*/
|
|
writel(SYSCFG_CMPENSETR_MPU_EN, syscfg + SYSCFG_CMPENSETR);
|
|
|
|
while (!(readl(syscfg + SYSCFG_CMPCR) & SYSCFG_CMPCR_READY))
|
|
;
|
|
clrbits_le32(syscfg + SYSCFG_CMPCR, SYSCFG_CMPCR_SW_CTRL);
|
|
#endif
|
|
}
|
|
|
|
/* board dependent setup after realloc */
|
|
int board_init(void)
|
|
{
|
|
struct udevice *dev;
|
|
|
|
/* address of boot parameters */
|
|
gd->bd->bi_boot_params = STM32_DDR_BASE + 0x100;
|
|
|
|
/* probe all PINCTRL for hog */
|
|
for (uclass_first_device(UCLASS_PINCTRL, &dev);
|
|
dev;
|
|
uclass_next_device(&dev)) {
|
|
pr_debug("probe pincontrol = %s\n", dev->name);
|
|
}
|
|
|
|
board_key_check();
|
|
|
|
sysconf_init();
|
|
|
|
if (IS_ENABLED(CONFIG_LED))
|
|
led_default_state();
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_late_init(void)
|
|
{
|
|
#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
|
|
const void *fdt_compat;
|
|
int fdt_compat_len;
|
|
|
|
fdt_compat = fdt_getprop(gd->fdt_blob, 0, "compatible",
|
|
&fdt_compat_len);
|
|
if (fdt_compat && fdt_compat_len) {
|
|
if (strncmp(fdt_compat, "st,", 3) != 0)
|
|
env_set("board_name", fdt_compat);
|
|
else
|
|
env_set("board_name", fdt_compat + 3);
|
|
}
|
|
#endif
|
|
|
|
/* for DK1/DK2 boards */
|
|
board_check_usb_power();
|
|
|
|
return 0;
|
|
}
|
|
|
|
void board_quiesce_devices(void)
|
|
{
|
|
setup_led(LEDST_OFF);
|
|
}
|