mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-09-07 21:33:24 +09:00
![Wolfgang Denk](/assets/img/avatar_default.png)
Many of the help messages were not really helpful; for example, many commands that take no arguments would not print a correct synopsis line, but "No additional help available." which is not exactly wrong, but not helpful either. Commit ``Make "usage" messages more helpful.'' changed this partially. But it also became clear that lots of "Usage" and "Help" messages (fields "usage" and "help" in struct cmd_tbl_s respective) were actually redundant. This patch cleans this up - for example: Before: => help dtt dtt - Digital Thermometer and Thermostat Usage: dtt - Read temperature from digital thermometer and thermostat. After: => help dtt dtt - Read temperature from Digital Thermometer and Thermostat Usage: dtt Signed-off-by: Wolfgang Denk <wd@denx.de>
584 lines
19 KiB
C
584 lines
19 KiB
C
/*
|
|
* Copyright (c) 2005
|
|
* Travis B. Sawyer, Sandburst Corporation, tsawyer@sandburst.com
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
#include <config.h>
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include "metrobox.h"
|
|
#include "metrobox_version.h"
|
|
#include <timestamp.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/io.h>
|
|
#include <spd_sdram.h>
|
|
#include <i2c.h>
|
|
#include "../common/ppc440gx_i2c.h"
|
|
#include "../common/sb_common.h"
|
|
#if defined(CONFIG_HAS_ETH0) || defined(CONFIG_HAS_ETH1) || \
|
|
defined(CONFIG_HAS_ETH2) || defined(CONFIG_HAS_ETH3)
|
|
#include <net.h>
|
|
#endif
|
|
|
|
void fpga_init (void);
|
|
|
|
METROBOX_BOARD_ID_ST board_id_as[] =
|
|
{ {"Undefined"}, /* Not specified */
|
|
{"2x10Gb"}, /* 2 ports, 10 GbE */
|
|
{"20x1Gb"}, /* 20 ports, 1 GbE */
|
|
{"Reserved"}, /* Reserved for future use */
|
|
};
|
|
|
|
/*************************************************************************
|
|
* board_early_init_f
|
|
*
|
|
* Setup chip selects, initialize the Opto-FPGA, initialize
|
|
* interrupt polarity and triggers.
|
|
************************************************************************/
|
|
int board_early_init_f (void)
|
|
{
|
|
ppc440_gpio_regs_t *gpio_regs;
|
|
|
|
/* Enable GPIO interrupts */
|
|
mtsdr(sdr_pfc0, 0x00103E00);
|
|
|
|
/* Setup access for LEDs, and system topology info */
|
|
gpio_regs = (ppc440_gpio_regs_t *)CONFIG_SYS_GPIO_BASE;
|
|
gpio_regs->open_drain = SBCOMMON_GPIO_SYS_LEDS;
|
|
gpio_regs->tri_state = SBCOMMON_GPIO_DBGLEDS;
|
|
|
|
/* Turn on all the leds for now */
|
|
gpio_regs->out = SBCOMMON_GPIO_LEDS;
|
|
|
|
/*--------------------------------------------------------------------+
|
|
| Initialize EBC CONFIG
|
|
+-------------------------------------------------------------------*/
|
|
mtebc(xbcfg,
|
|
EBC_CFG_LE_UNLOCK | EBC_CFG_PTD_ENABLE |
|
|
EBC_CFG_RTC_64PERCLK | EBC_CFG_ATC_PREVIOUS |
|
|
EBC_CFG_DTC_PREVIOUS | EBC_CFG_CTC_PREVIOUS |
|
|
EBC_CFG_EMC_DEFAULT | EBC_CFG_PME_DISABLE |
|
|
EBC_CFG_PR_32);
|
|
|
|
/*--------------------------------------------------------------------+
|
|
| 1/2 MB FLASH. Initialize bank 0 with default values.
|
|
+-------------------------------------------------------------------*/
|
|
mtebc(pb0ap,
|
|
EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(8) |
|
|
EBC_BXAP_BCE_DISABLE | EBC_BXAP_CSN_ENCODE(1) |
|
|
EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1) |
|
|
EBC_BXAP_WBF_ENCODE(1)| EBC_BXAP_TH_ENCODE(1) |
|
|
EBC_BXAP_RE_DISABLED | EBC_BXAP_BEM_WRITEONLY |
|
|
EBC_BXAP_PEN_DISABLED);
|
|
|
|
mtebc(pb0cr, EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FLASH_BASE) |
|
|
EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_8BIT);
|
|
/*--------------------------------------------------------------------+
|
|
| 8KB NVRAM/RTC. Initialize bank 1 with default values.
|
|
+-------------------------------------------------------------------*/
|
|
mtebc(pb1ap,
|
|
EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(10) |
|
|
EBC_BXAP_BCE_DISABLE | EBC_BXAP_CSN_ENCODE(1) |
|
|
EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1) |
|
|
EBC_BXAP_WBF_ENCODE(1)| EBC_BXAP_TH_ENCODE(1) |
|
|
EBC_BXAP_RE_DISABLED | EBC_BXAP_BEM_WRITEONLY |
|
|
EBC_BXAP_PEN_DISABLED);
|
|
|
|
mtebc(pb1cr, EBC_BXCR_BAS_ENCODE(0x48000000) |
|
|
EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_8BIT);
|
|
|
|
/*--------------------------------------------------------------------+
|
|
| Compact Flash, uses 2 Chip Selects (2 & 6)
|
|
+-------------------------------------------------------------------*/
|
|
mtebc(pb2ap,
|
|
EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(8) |
|
|
EBC_BXAP_BCE_DISABLE | EBC_BXAP_CSN_ENCODE(1) |
|
|
EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1) |
|
|
EBC_BXAP_WBF_ENCODE(0)| EBC_BXAP_TH_ENCODE(1) |
|
|
EBC_BXAP_RE_DISABLED | EBC_BXAP_BEM_WRITEONLY |
|
|
EBC_BXAP_PEN_DISABLED);
|
|
|
|
mtebc(pb2cr, EBC_BXCR_BAS_ENCODE(0xF0000000) |
|
|
EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_16BIT);
|
|
|
|
/*--------------------------------------------------------------------+
|
|
| OPTO & OFEM FPGA. Initialize bank 3 with default values.
|
|
+-------------------------------------------------------------------*/
|
|
mtebc(pb3ap,
|
|
EBC_BXAP_RE_ENABLED | EBC_BXAP_SOR_NONDELAYED |
|
|
EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(3) |
|
|
EBC_BXAP_TH_ENCODE(1) | EBC_BXAP_WBF_ENCODE(0) |
|
|
EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_PEN_DISABLED |
|
|
EBC_BXAP_OEN_ENCODE(1) | EBC_BXAP_BEM_RW);
|
|
|
|
mtebc(pb3cr, EBC_BXCR_BAS_ENCODE(0x48200000) |
|
|
EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT);
|
|
|
|
/*--------------------------------------------------------------------+
|
|
| MAC A for metrobox
|
|
| MAC A & B for Kamino. OFEM FPGA decodes the addresses
|
|
| Initialize bank 4 with default values.
|
|
+-------------------------------------------------------------------*/
|
|
mtebc(pb4ap,
|
|
EBC_BXAP_RE_ENABLED | EBC_BXAP_SOR_NONDELAYED |
|
|
EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(3) |
|
|
EBC_BXAP_TH_ENCODE(1) | EBC_BXAP_WBF_ENCODE(0) |
|
|
EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_PEN_DISABLED |
|
|
EBC_BXAP_OEN_ENCODE(1) | EBC_BXAP_BEM_RW);
|
|
|
|
mtebc(pb4cr, EBC_BXCR_BAS_ENCODE(0x48600000) |
|
|
EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT);
|
|
|
|
/*--------------------------------------------------------------------+
|
|
| Metrobox MAC B Initialize bank 5 with default values.
|
|
| KA REF FPGA Initialize bank 5 with default values.
|
|
+-------------------------------------------------------------------*/
|
|
mtebc(pb5ap,
|
|
EBC_BXAP_RE_ENABLED | EBC_BXAP_SOR_NONDELAYED |
|
|
EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(3) |
|
|
EBC_BXAP_TH_ENCODE(1) | EBC_BXAP_WBF_ENCODE(0) |
|
|
EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_PEN_DISABLED |
|
|
EBC_BXAP_OEN_ENCODE(1) | EBC_BXAP_BEM_RW);
|
|
|
|
mtebc(pb5cr, EBC_BXCR_BAS_ENCODE(0x48700000) |
|
|
EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT);
|
|
|
|
/*--------------------------------------------------------------------+
|
|
| Compact Flash, uses 2 Chip Selects (2 & 6)
|
|
+-------------------------------------------------------------------*/
|
|
mtebc(pb6ap,
|
|
EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(8) |
|
|
EBC_BXAP_BCE_DISABLE | EBC_BXAP_CSN_ENCODE(1) |
|
|
EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1) |
|
|
EBC_BXAP_WBF_ENCODE(0)| EBC_BXAP_TH_ENCODE(1) |
|
|
EBC_BXAP_RE_DISABLED | EBC_BXAP_BEM_WRITEONLY |
|
|
EBC_BXAP_PEN_DISABLED);
|
|
|
|
mtebc(pb6cr, EBC_BXCR_BAS_ENCODE(0xF0100000) |
|
|
EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_16BIT);
|
|
|
|
/*--------------------------------------------------------------------+
|
|
| BME-32. Initialize bank 7 with default values.
|
|
+-------------------------------------------------------------------*/
|
|
mtebc(pb7ap,
|
|
EBC_BXAP_RE_ENABLED | EBC_BXAP_SOR_NONDELAYED |
|
|
EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(3) |
|
|
EBC_BXAP_TH_ENCODE(1) | EBC_BXAP_WBF_ENCODE(0) |
|
|
EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_PEN_DISABLED |
|
|
EBC_BXAP_OEN_ENCODE(1) | EBC_BXAP_BEM_RW);
|
|
|
|
mtebc(pb7cr, EBC_BXCR_BAS_ENCODE(0x48500000) |
|
|
EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT);
|
|
|
|
/*--------------------------------------------------------------------+
|
|
* Setup the interrupt controller polarities, triggers, etc.
|
|
+-------------------------------------------------------------------*/
|
|
/*
|
|
* Because of the interrupt handling rework to handle 440GX interrupts
|
|
* with the common code, we needed to change names of the UIC registers.
|
|
* Here the new relationship:
|
|
*
|
|
* U-Boot name 440GX name
|
|
* -----------------------
|
|
* UIC0 UICB0
|
|
* UIC1 UIC0
|
|
* UIC2 UIC1
|
|
* UIC3 UIC2
|
|
*/
|
|
mtdcr (uic1sr, 0xffffffff); /* clear all */
|
|
mtdcr (uic1er, 0x00000000); /* disable all */
|
|
mtdcr (uic1cr, 0x00000000); /* all non- critical */
|
|
mtdcr (uic1pr, 0xfffffe03); /* polarity */
|
|
mtdcr (uic1tr, 0x01c00000); /* trigger edge vs level */
|
|
mtdcr (uic1vr, 0x00000001); /* int31 highest, base=0x000 */
|
|
mtdcr (uic1sr, 0xffffffff); /* clear all */
|
|
|
|
mtdcr (uic2sr, 0xffffffff); /* clear all */
|
|
mtdcr (uic2er, 0x00000000); /* disable all */
|
|
mtdcr (uic2cr, 0x00000000); /* all non-critical */
|
|
mtdcr (uic2pr, 0xffffc8ff); /* polarity */
|
|
mtdcr (uic2tr, 0x00ff0000); /* trigger edge vs level */
|
|
mtdcr (uic2vr, 0x00000001); /* int31 highest, base=0x000 */
|
|
mtdcr (uic2sr, 0xffffffff); /* clear all */
|
|
|
|
mtdcr (uic3sr, 0xffffffff); /* clear all */
|
|
mtdcr (uic3er, 0x00000000); /* disable all */
|
|
mtdcr (uic3cr, 0x00000000); /* all non-critical */
|
|
mtdcr (uic3pr, 0xffff83ff); /* polarity */
|
|
mtdcr (uic3tr, 0x00ff8c0f); /* trigger edge vs level */
|
|
mtdcr (uic3vr, 0x00000001); /* int31 highest, base=0x000 */
|
|
mtdcr (uic3sr, 0xffffffff); /* clear all */
|
|
|
|
mtdcr (uic0sr, 0xfc000000); /* clear all */
|
|
mtdcr (uic0er, 0x00000000); /* disable all */
|
|
mtdcr (uic0cr, 0x00000000); /* all non-critical */
|
|
mtdcr (uic0pr, 0xfc000000);
|
|
mtdcr (uic0tr, 0x00000000);
|
|
mtdcr (uic0vr, 0x00000001);
|
|
|
|
fpga_init();
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*************************************************************************
|
|
* checkboard
|
|
*
|
|
* Dump pertinent info to the console
|
|
************************************************************************/
|
|
int checkboard (void)
|
|
{
|
|
sys_info_t sysinfo;
|
|
unsigned char brd_rev, brd_id;
|
|
unsigned short sernum;
|
|
unsigned char opto_rev, opto_id;
|
|
OPTO_FPGA_REGS_ST *opto_ps;
|
|
|
|
opto_ps = (OPTO_FPGA_REGS_ST *)CONFIG_SYS_FPGA_BASE;
|
|
|
|
opto_rev = (unsigned char)((opto_ps->revision_ul &
|
|
SAND_HAL_XC_XCVR_CNTL_REVISION_REVISION_MASK)
|
|
>> SAND_HAL_XC_XCVR_CNTL_REVISION_REVISION_SHIFT);
|
|
|
|
opto_id = (unsigned char)((opto_ps->revision_ul &
|
|
SAND_HAL_XC_XCVR_CNTL_REVISION_IDENTIFICATION_MASK)
|
|
>> SAND_HAL_XC_XCVR_CNTL_REVISION_IDENTIFICATION_SHIFT);
|
|
|
|
brd_rev = (unsigned char)((opto_ps->boardinfo_ul &
|
|
SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_REV_MASK)
|
|
>> SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_REV_SHIFT);
|
|
|
|
brd_id = (unsigned char)((opto_ps->boardinfo_ul &
|
|
SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_ID_MASK)
|
|
>> SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_ID_SHIFT);
|
|
|
|
get_sys_info (&sysinfo);
|
|
|
|
sernum = sbcommon_get_serial_number();
|
|
printf ("Board: Sandburst Corporation MetroBox Serial Number: %d\n", sernum);
|
|
printf ("%s\n", METROBOX_U_BOOT_REL_STR);
|
|
|
|
printf ("Built %s %s by %s\n", U_BOOT_DATE, U_BOOT_TIME, BUILDUSER);
|
|
if (sbcommon_get_master()) {
|
|
printf("Slot 0 - Master\nSlave board");
|
|
if (sbcommon_secondary_present())
|
|
printf(" present\n");
|
|
else
|
|
printf(" not detected\n");
|
|
} else {
|
|
printf("Slot 1 - Slave\n\n");
|
|
}
|
|
|
|
printf ("OptoFPGA ID:\t0x%02X\tRev: 0x%02X\n", opto_id, opto_rev);
|
|
printf ("Board Rev:\t0x%02X\tID: %s\n", brd_rev, board_id_as[brd_id].name);
|
|
|
|
/* Fix the ack in the bme 32 */
|
|
udelay(5000);
|
|
out32(CONFIG_SYS_BME32_BASE + 0x0000000C, 0x00000001);
|
|
asm("eieio");
|
|
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*************************************************************************
|
|
* misc_init_f
|
|
*
|
|
* Initialize I2C bus one to gain access to the fans
|
|
************************************************************************/
|
|
int misc_init_f (void)
|
|
{
|
|
/* Turn on i2c bus 1 */
|
|
puts ("I2C1: ");
|
|
i2c1_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
|
|
puts ("ready\n");
|
|
|
|
/* Turn on fans */
|
|
sbcommon_fans();
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*************************************************************************
|
|
* misc_init_r
|
|
*
|
|
* Do nothing.
|
|
************************************************************************/
|
|
int misc_init_r (void)
|
|
{
|
|
unsigned short sernum;
|
|
char envstr[255];
|
|
uchar enetaddr[6];
|
|
unsigned char opto_rev;
|
|
OPTO_FPGA_REGS_ST *opto_ps;
|
|
|
|
opto_ps = (OPTO_FPGA_REGS_ST *)CONFIG_SYS_FPGA_BASE;
|
|
|
|
if(NULL != getenv("secondserial")) {
|
|
puts("secondserial is set, switching to second serial port\n");
|
|
setenv("stderr", "serial1");
|
|
setenv("stdout", "serial1");
|
|
setenv("stdin", "serial1");
|
|
}
|
|
|
|
setenv("ubrelver", METROBOX_U_BOOT_REL_STR);
|
|
|
|
memset(envstr, 0, 255);
|
|
sprintf (envstr, "Built %s %s by %s",
|
|
U_BOOT_DATE, U_BOOT_TIME, BUILDUSER);
|
|
setenv("bldstr", envstr);
|
|
saveenv();
|
|
|
|
if( getenv("autorecover")) {
|
|
setenv("autorecover", NULL);
|
|
saveenv();
|
|
sernum = sbcommon_get_serial_number();
|
|
|
|
printf("\nSetting up environment for automatic filesystem recovery\n");
|
|
/*
|
|
* Setup default bootargs
|
|
*/
|
|
memset(envstr, 0, 255);
|
|
sprintf(envstr, "console=ttyS0,9600 root=/dev/ram0 "
|
|
"rw ip=10.100.60.%d:::255.255.0.0:metrobox%d:eth0:none idebus=33",
|
|
sernum, sernum);
|
|
setenv("bootargs", envstr);
|
|
|
|
/*
|
|
* Setup Default boot command
|
|
*/
|
|
setenv("bootcmd", "fatload ide 0 8000000 pimage.metrobox;"
|
|
"fatload ide 0 8100000 pramdisk;"
|
|
"bootm 8000000 8100000");
|
|
|
|
printf("Done. Please type allow the system to continue to boot\n");
|
|
}
|
|
|
|
if( getenv("fakeled")) {
|
|
setenv("bootdelay", "-1");
|
|
saveenv();
|
|
printf("fakeled is set. use 'setenv fakeled ; setenv bootdelay 5 ; saveenv' to recover\n");
|
|
opto_rev = (unsigned char)((opto_ps->revision_ul &
|
|
SAND_HAL_XC_XCVR_CNTL_REVISION_REVISION_MASK)
|
|
>> SAND_HAL_XC_XCVR_CNTL_REVISION_REVISION_SHIFT);
|
|
|
|
if(0x12 <= opto_rev) {
|
|
opto_ps->control_ul &= ~ SAND_HAL_XC_XCVR_CNTL_CNTL_ERROR_LED_MASK;
|
|
}
|
|
}
|
|
|
|
#ifdef CONFIG_HAS_ETH0
|
|
if (!eth_getenv_enetaddr("ethaddr", enetaddr)) {
|
|
board_get_enetaddr(0, enetaddr);
|
|
eth_setenv_enetaddr("ethaddr", enetaddr);
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_HAS_ETH1
|
|
if (!eth_getenv_enetaddr("eth1addr", enetaddr)) {
|
|
board_get_enetaddr(1, enetaddr);
|
|
eth_setenv_enetaddr("eth1addr", enetaddr);
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_HAS_ETH2
|
|
if (!eth_getenv_enetaddr("eth2addr", enetaddr)) {
|
|
board_get_enetaddr(2, enetaddr);
|
|
eth_setenv_enetaddr("eth2addr", enetaddr);
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_HAS_ETH3
|
|
if (!eth_getenv_enetaddr("eth3addr", enetaddr)) {
|
|
board_get_enetaddr(3, enetaddr);
|
|
eth_setenv_enetaddr("eth3addr", enetaddr);
|
|
}
|
|
#endif
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*************************************************************************
|
|
* ide_set_reset
|
|
************************************************************************/
|
|
#ifdef CONFIG_IDE_RESET
|
|
void ide_set_reset(int on)
|
|
{
|
|
OPTO_FPGA_REGS_ST *opto_ps;
|
|
opto_ps = (OPTO_FPGA_REGS_ST *)CONFIG_SYS_FPGA_BASE;
|
|
|
|
if (on) { /* assert RESET */
|
|
opto_ps->reset_ul &= ~SAND_HAL_XC_XCVR_CNTL_RESET_CF_RESET_N_MASK;
|
|
} else { /* release RESET */
|
|
opto_ps->reset_ul |= SAND_HAL_XC_XCVR_CNTL_RESET_CF_RESET_N_MASK;
|
|
}
|
|
}
|
|
#endif /* CONFIG_IDE_RESET */
|
|
|
|
/*************************************************************************
|
|
* fpga_init
|
|
************************************************************************/
|
|
void fpga_init(void)
|
|
{
|
|
OPTO_FPGA_REGS_ST *opto_ps;
|
|
unsigned char opto_rev;
|
|
unsigned long tmp;
|
|
|
|
/* Ensure we have power all around */
|
|
udelay(500);
|
|
|
|
/*
|
|
* Take appropriate hw bits out of reset
|
|
*/
|
|
opto_ps = (OPTO_FPGA_REGS_ST *)CONFIG_SYS_FPGA_BASE;
|
|
|
|
tmp =
|
|
SAND_HAL_XC_XCVR_CNTL_RESET_MAC1_RESET_N_MASK |
|
|
SAND_HAL_XC_XCVR_CNTL_RESET_MAC0_RESET_N_MASK |
|
|
SAND_HAL_XC_XCVR_CNTL_RESET_BME_RESET_N_MASK |
|
|
SAND_HAL_XC_XCVR_CNTL_RESET_ACE_RESET_N_MASK |
|
|
SAND_HAL_XC_XCVR_CNTL_RESET_CF_RESET_N_MASK |
|
|
SAND_HAL_XC_XCVR_CNTL_RESET_QE_A_RESET_N_MASK |
|
|
SAND_HAL_XC_XCVR_CNTL_RESET_IFE_A_RESET_N_MASK |
|
|
SAND_HAL_XC_XCVR_CNTL_RESET_EFE_A_RESET_N_MASK |
|
|
SAND_HAL_XC_XCVR_CNTL_RESET_QE_B_RESET_N_MASK |
|
|
SAND_HAL_XC_XCVR_CNTL_RESET_IFE_B_RESET_N_MASK |
|
|
SAND_HAL_XC_XCVR_CNTL_RESET_EFE_B_RESET_N_MASK |
|
|
SAND_HAL_XC_XCVR_CNTL_RESET_LOCK1_RESET_N_MASK |
|
|
SAND_HAL_XC_XCVR_CNTL_RESET_LOCK0_RESET_N_MASK |
|
|
SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX1_RESET_N_MASK |
|
|
SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX0_RESET_N_MASK |
|
|
SAND_HAL_XC_XCVR_CNTL_RESET_PHY0_RESET_N_MASK |
|
|
SAND_HAL_XC_XCVR_CNTL_RESET_PHY1_RESET_N_MASK |
|
|
SAND_HAL_XC_XCVR_CNTL_RESET_SLAVE_RESET_N_MASK;
|
|
opto_ps->reset_ul = tmp;
|
|
/*
|
|
* Turn on the 'Slow Blink' for the System Error Led.
|
|
* Ensure FPGA rev is up to at least rev 0x12
|
|
*/
|
|
opto_rev = (unsigned char)((opto_ps->revision_ul &
|
|
SAND_HAL_XC_XCVR_CNTL_REVISION_REVISION_MASK)
|
|
>> SAND_HAL_XC_XCVR_CNTL_REVISION_REVISION_SHIFT);
|
|
if(0x12 <= opto_rev) {
|
|
opto_ps->control_ul |= 1 << SAND_HAL_XC_XCVR_CNTL_CNTL_ERROR_LED_SHIFT;
|
|
}
|
|
|
|
asm("eieio");
|
|
|
|
return;
|
|
}
|
|
|
|
int metroboxSetupVars(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
|
|
{
|
|
unsigned short sernum;
|
|
char envstr[255];
|
|
|
|
sernum = sbcommon_get_serial_number();
|
|
|
|
memset(envstr, 0, 255);
|
|
/*
|
|
* Setup our ip address
|
|
*/
|
|
sprintf(envstr, "10.100.60.%d", sernum);
|
|
|
|
setenv("ipaddr", envstr);
|
|
/*
|
|
* Setup the host ip address
|
|
*/
|
|
setenv("serverip", "10.100.17.10");
|
|
|
|
/*
|
|
* Setup default bootargs
|
|
*/
|
|
memset(envstr, 0, 255);
|
|
|
|
sprintf(envstr, "console=ttyS0,9600 root=/dev/nfs "
|
|
"rw nfsroot=10.100.17.10:/home/metrobox/mbc%d "
|
|
"nfsaddrs=10.100.60.%d:10.100.17.10:10.100.1.1"
|
|
":255.255.0.0:metrobox%d.sandburst.com:eth0:none idebus=33",
|
|
sernum, sernum, sernum);
|
|
|
|
setenv("bootargs_nfs", envstr);
|
|
setenv("bootargs", envstr);
|
|
|
|
/*
|
|
* Setup CF bootargs
|
|
*/
|
|
memset(envstr, 0, 255);
|
|
sprintf(envstr, "console=ttyS0,9600 root=/dev/hda2 "
|
|
"rw ip=10.100.60.%d:::255.255.0.0:metrobox%d:eth0:none idebus=33",
|
|
sernum, sernum);
|
|
|
|
setenv("bootargs_cf", envstr);
|
|
|
|
/*
|
|
* Setup Default boot command
|
|
*/
|
|
setenv("bootcmd_tftp", "tftp 8000000 pImage.metrobox;bootm 8000000");
|
|
setenv("bootcmd", "tftp 8000000 pImage.metrobox;bootm 8000000");
|
|
|
|
/*
|
|
* Setup compact flash boot command
|
|
*/
|
|
setenv("bootcmd_cf", "fatload ide 0 8000000 pimage.metrobox;bootm 8000000");
|
|
|
|
saveenv();
|
|
|
|
|
|
return(1);
|
|
}
|
|
|
|
int metroboxRecover(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
|
|
{
|
|
unsigned short sernum;
|
|
char envstr[255];
|
|
|
|
sernum = sbcommon_get_serial_number();
|
|
|
|
printf("\nSetting up environment for filesystem recovery\n");
|
|
/*
|
|
* Setup default bootargs
|
|
*/
|
|
memset(envstr, 0, 255);
|
|
sprintf(envstr, "console=ttyS0,9600 root=/dev/ram0 "
|
|
"rw ip=10.100.60.%d:::255.255.0.0:metrobox%d:eth0:none",
|
|
sernum, sernum);
|
|
|
|
setenv("bootargs", envstr);
|
|
|
|
/*
|
|
* Setup Default boot command
|
|
*/
|
|
setenv("bootcmd", "fatload ide 0 8000000 pimage.metrobox;"
|
|
"fatload ide 0 8100000 pramdisk;"
|
|
"bootm 8000000 8100000");
|
|
|
|
printf("Done. Please type boot<cr>.\nWhen the kernel has booted"
|
|
" please type fsrecover.sh<cr>\n");
|
|
|
|
return(1);
|
|
}
|
|
|
|
U_BOOT_CMD(mbsetup, 1, 1, metroboxSetupVars,
|
|
"Set environment to factory defaults", "");
|
|
|
|
U_BOOT_CMD(mbrecover, 1, 1, metroboxRecover,
|
|
"Set environment to allow for fs recovery", "");
|