mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-24 19:08:50 +09:00
![Simon Goldschmidt](/assets/img/avatar_default.png)
Kconfig should only 'select' features that are required for an arch. Standard features that can be disabled without breaking board support should use 'imply' instead, to allow users to disable it. These options are changed for mach-socfpga: - DM_SPI & DM_SPI_FLASH: only required with QSPI support enabled - SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION: the boot rom supports a partitionless mode also, where SPL is located at address 0 - HW_WATCHDOG: while all mainline board defconfigs use it, U-Boot should still work without it. Signed-off-by: Simon Goldschmidt <sgoldschmidt@de.pepperl-fuchs.com>
1339 lines
30 KiB
Plaintext
1339 lines
30 KiB
Plaintext
menu "ARM architecture"
|
|
depends on ARM
|
|
|
|
config SYS_ARCH
|
|
default "arm"
|
|
|
|
config ARM64
|
|
bool
|
|
select PHYS_64BIT
|
|
select SYS_CACHE_SHIFT_6
|
|
|
|
if ARM64
|
|
config POSITION_INDEPENDENT
|
|
bool "Generate position-independent pre-relocation code"
|
|
help
|
|
U-Boot expects to be linked to a specific hard-coded address, and to
|
|
be loaded to and run from that address. This option lifts that
|
|
restriction, thus allowing the code to be loaded to and executed
|
|
from almost any address. This logic relies on the relocation
|
|
information that is embedded into the binary to support U-Boot
|
|
relocating itself to the top-of-RAM later during execution.
|
|
|
|
config SYS_INIT_SP_BSS_OFFSET
|
|
int
|
|
help
|
|
U-Boot typically uses a hard-coded value for the stack pointer
|
|
before relocation. Define this option to instead calculate the
|
|
initial SP at run-time. This is useful to avoid hard-coding addresses
|
|
into U-Boot, so that can be loaded and executed at arbitrary
|
|
addresses and thus avoid using arbitrary addresses at runtime. This
|
|
option's value is the offset added to &_bss_start in order to
|
|
calculate the stack pointer. This offset should be large enough so
|
|
that the early malloc region, global data (gd), and early stack usage
|
|
do not overlap any appended DTB.
|
|
|
|
config LINUX_KERNEL_IMAGE_HEADER
|
|
bool
|
|
help
|
|
Place a Linux kernel image header at the start of the U-Boot binary.
|
|
The format of the header is described in the Linux kernel source at
|
|
Documentation/arm64/booting.txt. This feature is useful since the
|
|
image header reports the amount of memory (BSS and similar) that
|
|
U-Boot needs to use, but which isn't part of the binary.
|
|
|
|
if LINUX_KERNEL_IMAGE_HEADER
|
|
config LNX_KRNL_IMG_TEXT_OFFSET_BASE
|
|
hex
|
|
help
|
|
The value subtracted from CONFIG_SYS_TEXT_BASE to calculate the
|
|
TEXT_OFFSET value written in to the Linux kernel image header.
|
|
endif
|
|
endif
|
|
|
|
config STATIC_RELA
|
|
bool
|
|
default y if ARM64 && !POSITION_INDEPENDENT
|
|
|
|
config DMA_ADDR_T_64BIT
|
|
bool
|
|
default y if ARM64
|
|
|
|
config HAS_VBAR
|
|
bool
|
|
|
|
config HAS_THUMB2
|
|
bool
|
|
|
|
# Used for compatibility with asm files copied from the kernel
|
|
config ARM_ASM_UNIFIED
|
|
bool
|
|
default y
|
|
|
|
# Used for compatibility with asm files copied from the kernel
|
|
config THUMB2_KERNEL
|
|
bool
|
|
|
|
# If set, the workarounds for these ARM errata are applied early during U-Boot
|
|
# startup. Note that in general these options force the workarounds to be
|
|
# applied; no CPU-type/version detection exists, unlike the similar options in
|
|
# the Linux kernel. Do not set these options unless they apply! Also note that
|
|
# the following can be machine specific errata. These do have ability to
|
|
# provide rudimentary version and machine specific checks, but expect no
|
|
# product checks:
|
|
# CONFIG_ARM_ERRATA_430973
|
|
# CONFIG_ARM_ERRATA_454179
|
|
# CONFIG_ARM_ERRATA_621766
|
|
# CONFIG_ARM_ERRATA_798870
|
|
# CONFIG_ARM_ERRATA_801819
|
|
config ARM_ERRATA_430973
|
|
bool
|
|
|
|
config ARM_ERRATA_454179
|
|
bool
|
|
|
|
config ARM_ERRATA_621766
|
|
bool
|
|
|
|
config ARM_ERRATA_716044
|
|
bool
|
|
|
|
config ARM_ERRATA_725233
|
|
bool
|
|
|
|
config ARM_ERRATA_742230
|
|
bool
|
|
|
|
config ARM_ERRATA_743622
|
|
bool
|
|
|
|
config ARM_ERRATA_751472
|
|
bool
|
|
|
|
config ARM_ERRATA_761320
|
|
bool
|
|
|
|
config ARM_ERRATA_773022
|
|
bool
|
|
|
|
config ARM_ERRATA_774769
|
|
bool
|
|
|
|
config ARM_ERRATA_794072
|
|
bool
|
|
|
|
config ARM_ERRATA_798870
|
|
bool
|
|
|
|
config ARM_ERRATA_801819
|
|
bool
|
|
|
|
config ARM_ERRATA_826974
|
|
bool
|
|
|
|
config ARM_ERRATA_828024
|
|
bool
|
|
|
|
config ARM_ERRATA_829520
|
|
bool
|
|
|
|
config ARM_ERRATA_833069
|
|
bool
|
|
|
|
config ARM_ERRATA_833471
|
|
bool
|
|
|
|
config ARM_ERRATA_845369
|
|
bool
|
|
|
|
config ARM_ERRATA_852421
|
|
bool
|
|
|
|
config ARM_ERRATA_852423
|
|
bool
|
|
|
|
config ARM_ERRATA_855873
|
|
bool
|
|
|
|
config CPU_ARM720T
|
|
bool
|
|
select SYS_CACHE_SHIFT_5
|
|
|
|
config CPU_ARM920T
|
|
bool
|
|
select SYS_CACHE_SHIFT_5
|
|
|
|
config CPU_ARM926EJS
|
|
bool
|
|
select SYS_CACHE_SHIFT_5
|
|
|
|
config CPU_ARM946ES
|
|
bool
|
|
select SYS_CACHE_SHIFT_5
|
|
|
|
config CPU_ARM1136
|
|
bool
|
|
select SYS_CACHE_SHIFT_5
|
|
|
|
config CPU_ARM1176
|
|
bool
|
|
select HAS_VBAR
|
|
select SYS_CACHE_SHIFT_5
|
|
|
|
config CPU_V7
|
|
bool
|
|
select HAS_VBAR
|
|
select HAS_THUMB2
|
|
select SYS_CACHE_SHIFT_6
|
|
|
|
config CPU_V7M
|
|
bool
|
|
select HAS_THUMB2
|
|
select THUMB2_KERNEL
|
|
select SYS_CACHE_SHIFT_5
|
|
|
|
config CPU_PXA
|
|
bool
|
|
select SYS_CACHE_SHIFT_5
|
|
|
|
config CPU_SA1100
|
|
bool
|
|
select SYS_CACHE_SHIFT_5
|
|
|
|
config SYS_CPU
|
|
default "arm720t" if CPU_ARM720T
|
|
default "arm920t" if CPU_ARM920T
|
|
default "arm926ejs" if CPU_ARM926EJS
|
|
default "arm946es" if CPU_ARM946ES
|
|
default "arm1136" if CPU_ARM1136
|
|
default "arm1176" if CPU_ARM1176
|
|
default "armv7" if CPU_V7
|
|
default "armv7m" if CPU_V7M
|
|
default "pxa" if CPU_PXA
|
|
default "sa1100" if CPU_SA1100
|
|
default "armv8" if ARM64
|
|
|
|
config SYS_ARM_ARCH
|
|
int
|
|
default 4 if CPU_ARM720T
|
|
default 4 if CPU_ARM920T
|
|
default 5 if CPU_ARM926EJS
|
|
default 5 if CPU_ARM946ES
|
|
default 6 if CPU_ARM1136
|
|
default 6 if CPU_ARM1176
|
|
default 7 if CPU_V7
|
|
default 7 if CPU_V7M
|
|
default 5 if CPU_PXA
|
|
default 4 if CPU_SA1100
|
|
default 8 if ARM64
|
|
|
|
config SYS_CACHE_SHIFT_5
|
|
bool
|
|
|
|
config SYS_CACHE_SHIFT_6
|
|
bool
|
|
|
|
config SYS_CACHE_SHIFT_7
|
|
bool
|
|
|
|
config SYS_CACHELINE_SIZE
|
|
int
|
|
default 128 if SYS_CACHE_SHIFT_7
|
|
default 64 if SYS_CACHE_SHIFT_6
|
|
default 32 if SYS_CACHE_SHIFT_5
|
|
|
|
config ARM_SMCCC
|
|
bool "Support for ARM SMC Calling Convention (SMCCC)"
|
|
depends on CPU_V7 || ARM64
|
|
select ARM_PSCI_FW
|
|
help
|
|
Say Y here if you want to enable ARM SMC Calling Convention.
|
|
This should be enabled if U-Boot needs to communicate with system
|
|
firmware (for example, PSCI) according to SMCCC.
|
|
|
|
config SEMIHOSTING
|
|
bool "support boot from semihosting"
|
|
help
|
|
In emulated environments, semihosting is a way for
|
|
the hosted environment to call out to the emulator to
|
|
retrieve files from the host machine.
|
|
|
|
config SYS_THUMB_BUILD
|
|
bool "Build U-Boot using the Thumb instruction set"
|
|
depends on !ARM64
|
|
help
|
|
Use this flag to build U-Boot using the Thumb instruction set for
|
|
ARM architectures. Thumb instruction set provides better code
|
|
density. For ARM architectures that support Thumb2 this flag will
|
|
result in Thumb2 code generated by GCC.
|
|
|
|
config SPL_SYS_THUMB_BUILD
|
|
bool "Build SPL using the Thumb instruction set"
|
|
default y if SYS_THUMB_BUILD
|
|
depends on !ARM64
|
|
help
|
|
Use this flag to build SPL using the Thumb instruction set for
|
|
ARM architectures. Thumb instruction set provides better code
|
|
density. For ARM architectures that support Thumb2 this flag will
|
|
result in Thumb2 code generated by GCC.
|
|
|
|
config SYS_L2CACHE_OFF
|
|
bool "L2cache off"
|
|
help
|
|
If SoC does not support L2CACHE or one do not want to enable
|
|
L2CACHE, choose this option.
|
|
|
|
config ENABLE_ARM_SOC_BOOT0_HOOK
|
|
bool "prepare BOOT0 header"
|
|
help
|
|
If the SoC's BOOT0 requires a header area filled with (magic)
|
|
values, then choose this option, and create a file included as
|
|
<asm/arch/boot0.h> which contains the required assembler code.
|
|
|
|
config ARM_CORTEX_CPU_IS_UP
|
|
bool
|
|
default n
|
|
|
|
config USE_ARCH_MEMCPY
|
|
bool "Use an assembly optimized implementation of memcpy"
|
|
default y
|
|
depends on !ARM64
|
|
help
|
|
Enable the generation of an optimized version of memcpy.
|
|
Such implementation may be faster under some conditions
|
|
but may increase the binary size.
|
|
|
|
config SPL_USE_ARCH_MEMCPY
|
|
bool "Use an assembly optimized implementation of memcpy for SPL"
|
|
default y if USE_ARCH_MEMCPY
|
|
depends on !ARM64
|
|
help
|
|
Enable the generation of an optimized version of memcpy.
|
|
Such implementation may be faster under some conditions
|
|
but may increase the binary size.
|
|
|
|
config USE_ARCH_MEMSET
|
|
bool "Use an assembly optimized implementation of memset"
|
|
default y
|
|
depends on !ARM64
|
|
help
|
|
Enable the generation of an optimized version of memset.
|
|
Such implementation may be faster under some conditions
|
|
but may increase the binary size.
|
|
|
|
config SPL_USE_ARCH_MEMSET
|
|
bool "Use an assembly optimized implementation of memset for SPL"
|
|
default y if USE_ARCH_MEMSET
|
|
depends on !ARM64
|
|
help
|
|
Enable the generation of an optimized version of memset.
|
|
Such implementation may be faster under some conditions
|
|
but may increase the binary size.
|
|
|
|
config ARM64_SUPPORT_AARCH32
|
|
bool "ARM64 system support AArch32 execution state"
|
|
default y if ARM64 && !TARGET_THUNDERX_88XX
|
|
help
|
|
This ARM64 system supports AArch32 execution state.
|
|
|
|
choice
|
|
prompt "Target select"
|
|
default TARGET_HIKEY
|
|
|
|
config ARCH_AT91
|
|
bool "Atmel AT91"
|
|
select SPL_BOARD_INIT if SPL
|
|
|
|
config TARGET_EDB93XX
|
|
bool "Support edb93xx"
|
|
select CPU_ARM920T
|
|
select PL010_SERIAL
|
|
|
|
config TARGET_ASPENITE
|
|
bool "Support aspenite"
|
|
select CPU_ARM926EJS
|
|
|
|
config TARGET_GPLUGD
|
|
bool "Support gplugd"
|
|
select CPU_ARM926EJS
|
|
|
|
config ARCH_DAVINCI
|
|
bool "TI DaVinci"
|
|
select CPU_ARM926EJS
|
|
imply CMD_SAVES
|
|
help
|
|
Support for TI's DaVinci platform.
|
|
|
|
config KIRKWOOD
|
|
bool "Marvell Kirkwood"
|
|
select CPU_ARM926EJS
|
|
select BOARD_EARLY_INIT_F
|
|
select ARCH_MISC_INIT
|
|
|
|
config ARCH_MVEBU
|
|
bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)"
|
|
select OF_CONTROL
|
|
select OF_SEPARATE
|
|
select DM
|
|
select DM_ETH
|
|
select DM_SERIAL
|
|
select DM_SPI
|
|
select DM_SPI_FLASH
|
|
|
|
config TARGET_DEVKIT3250
|
|
bool "Support devkit3250"
|
|
select CPU_ARM926EJS
|
|
select SUPPORT_SPL
|
|
|
|
config TARGET_WORK_92105
|
|
bool "Support work_92105"
|
|
select CPU_ARM926EJS
|
|
select SUPPORT_SPL
|
|
|
|
config TARGET_APF27
|
|
bool "Support apf27"
|
|
select CPU_ARM926EJS
|
|
select SUPPORT_SPL
|
|
|
|
config ORION5X
|
|
bool "Marvell Orion"
|
|
select CPU_ARM926EJS
|
|
|
|
config TARGET_SPEAR300
|
|
bool "Support spear300"
|
|
select CPU_ARM926EJS
|
|
select BOARD_EARLY_INIT_F
|
|
imply CMD_SAVES
|
|
select PL011_SERIAL
|
|
|
|
config TARGET_SPEAR310
|
|
bool "Support spear310"
|
|
select CPU_ARM926EJS
|
|
select BOARD_EARLY_INIT_F
|
|
imply CMD_SAVES
|
|
select PL011_SERIAL
|
|
|
|
config TARGET_SPEAR320
|
|
bool "Support spear320"
|
|
select CPU_ARM926EJS
|
|
select BOARD_EARLY_INIT_F
|
|
imply CMD_SAVES
|
|
select PL011_SERIAL
|
|
|
|
config TARGET_SPEAR600
|
|
bool "Support spear600"
|
|
select CPU_ARM926EJS
|
|
select BOARD_EARLY_INIT_F
|
|
imply CMD_SAVES
|
|
select PL011_SERIAL
|
|
|
|
config TARGET_STV0991
|
|
bool "Support stv0991"
|
|
select CPU_V7
|
|
select DM
|
|
select DM_SERIAL
|
|
select DM_SPI
|
|
select DM_SPI_FLASH
|
|
select SPI_FLASH
|
|
select PL01X_SERIAL
|
|
|
|
config TARGET_X600
|
|
bool "Support x600"
|
|
select BOARD_LATE_INIT
|
|
select CPU_ARM926EJS
|
|
select SUPPORT_SPL
|
|
select PL011_SERIAL
|
|
|
|
config TARGET_IMX31_PHYCORE
|
|
bool "Support imx31_phycore_eet"
|
|
select CPU_ARM1136
|
|
select BOARD_EARLY_INIT_F
|
|
|
|
config TARGET_IMX31_PHYCORE_EET
|
|
bool "Support imx31_phycore_eet"
|
|
select BOARD_LATE_INIT
|
|
select CPU_ARM1136
|
|
select BOARD_EARLY_INIT_F
|
|
|
|
config TARGET_MX31ADS
|
|
bool "Support mx31ads"
|
|
select CPU_ARM1136
|
|
select BOARD_EARLY_INIT_F
|
|
|
|
config TARGET_MX31PDK
|
|
bool "Support mx31pdk"
|
|
select BOARD_LATE_INIT
|
|
select CPU_ARM1136
|
|
select SUPPORT_SPL
|
|
select BOARD_EARLY_INIT_F
|
|
|
|
config TARGET_WOODBURN
|
|
bool "Support woodburn"
|
|
select CPU_ARM1136
|
|
|
|
config TARGET_WOODBURN_SD
|
|
bool "Support woodburn_sd"
|
|
select CPU_ARM1136
|
|
select SUPPORT_SPL
|
|
|
|
config TARGET_FLEA3
|
|
bool "Support flea3"
|
|
select CPU_ARM1136
|
|
|
|
config TARGET_MX35PDK
|
|
bool "Support mx35pdk"
|
|
select BOARD_LATE_INIT
|
|
select CPU_ARM1136
|
|
|
|
config ARCH_BCM283X
|
|
bool "Broadcom BCM283X family"
|
|
select DM
|
|
select DM_SERIAL
|
|
select DM_GPIO
|
|
select OF_CONTROL
|
|
select PL01X_SERIAL
|
|
select SERIAL_SEARCH_ALL
|
|
imply FAT_WRITE
|
|
|
|
config TARGET_VEXPRESS_CA15_TC2
|
|
bool "Support vexpress_ca15_tc2"
|
|
select CPU_V7
|
|
select CPU_V7_HAS_NONSEC
|
|
select CPU_V7_HAS_VIRT
|
|
select PL011_SERIAL
|
|
|
|
config TARGET_VEXPRESS_CA5X2
|
|
bool "Support vexpress_ca5x2"
|
|
select CPU_V7
|
|
select PL011_SERIAL
|
|
|
|
config TARGET_VEXPRESS_CA9X4
|
|
bool "Support vexpress_ca9x4"
|
|
select CPU_V7
|
|
select PL011_SERIAL
|
|
|
|
config TARGET_BCM23550_W1D
|
|
bool "Support bcm23550_w1d"
|
|
select CPU_V7
|
|
imply CRC32_VERIFY
|
|
imply FAT_WRITE
|
|
|
|
config TARGET_BCM28155_AP
|
|
bool "Support bcm28155_ap"
|
|
select CPU_V7
|
|
imply CRC32_VERIFY
|
|
imply FAT_WRITE
|
|
|
|
config TARGET_BCMCYGNUS
|
|
bool "Support bcmcygnus"
|
|
select CPU_V7
|
|
imply CRC32_VERIFY
|
|
imply CMD_HASH
|
|
imply FAT_WRITE
|
|
imply HASH_VERIFY
|
|
imply NETDEVICES
|
|
imply BCM_SF2_ETH
|
|
imply BCM_SF2_ETH_GMAC
|
|
|
|
config TARGET_BCMNSP
|
|
bool "Support bcmnsp"
|
|
select CPU_V7
|
|
|
|
config TARGET_BCMNS2
|
|
bool "Support Broadcom Northstar2"
|
|
select ARM64
|
|
help
|
|
Support for Broadcom Northstar 2 SoCs. NS2 is a quad-core 64-bit
|
|
ARMv8 Cortex-A57 processors targeting a broad range of networking
|
|
applications
|
|
|
|
config ARCH_EXYNOS
|
|
bool "Samsung EXYNOS"
|
|
select DM
|
|
select DM_I2C
|
|
select DM_SPI_FLASH
|
|
select DM_SERIAL
|
|
select DM_SPI
|
|
select DM_GPIO
|
|
select DM_KEYBOARD
|
|
imply FAT_WRITE
|
|
|
|
config ARCH_S5PC1XX
|
|
bool "Samsung S5PC1XX"
|
|
select CPU_V7
|
|
select DM
|
|
select DM_SERIAL
|
|
select DM_GPIO
|
|
select DM_I2C
|
|
|
|
config ARCH_HIGHBANK
|
|
bool "Calxeda Highbank"
|
|
select CPU_V7
|
|
select PL011_SERIAL
|
|
|
|
config ARCH_INTEGRATOR
|
|
bool "ARM Ltd. Integrator family"
|
|
select DM
|
|
select DM_SERIAL
|
|
select PL01X_SERIAL
|
|
|
|
config ARCH_KEYSTONE
|
|
bool "TI Keystone"
|
|
select CPU_V7
|
|
select SUPPORT_SPL
|
|
select SYS_THUMB_BUILD
|
|
select CMD_POWEROFF
|
|
imply CMD_MTDPARTS
|
|
imply FIT
|
|
imply CMD_SAVES
|
|
|
|
config ARCH_OMAP2PLUS
|
|
bool "TI OMAP2+"
|
|
select CPU_V7
|
|
select SPL_BOARD_INIT if SPL
|
|
select SPL_STACK_R if SPL
|
|
select SUPPORT_SPL
|
|
imply FIT
|
|
|
|
config ARCH_MESON
|
|
bool "Amlogic Meson"
|
|
help
|
|
Support for the Meson SoC family developed by Amlogic Inc.,
|
|
targeted at media players and tablet computers. We currently
|
|
support the S905 (GXBaby) 64-bit SoC.
|
|
|
|
config ARCH_MX8M
|
|
bool "NXP i.MX8M platform"
|
|
select ARM64
|
|
select DM
|
|
select SUPPORT_SPL
|
|
|
|
config ARCH_MX23
|
|
bool "NXP i.MX23 family"
|
|
select CPU_ARM926EJS
|
|
select PL011_SERIAL
|
|
select SUPPORT_SPL
|
|
|
|
config ARCH_MX25
|
|
bool "NXP MX25"
|
|
select CPU_ARM926EJS
|
|
imply MXC_GPIO
|
|
|
|
config ARCH_MX28
|
|
bool "NXP i.MX28 family"
|
|
select CPU_ARM926EJS
|
|
select PL011_SERIAL
|
|
select SUPPORT_SPL
|
|
|
|
config ARCH_MX7ULP
|
|
bool "NXP MX7ULP"
|
|
select CPU_V7
|
|
select ROM_UNIFIED_SECTIONS
|
|
imply MXC_GPIO
|
|
|
|
config ARCH_MX7
|
|
bool "Freescale MX7"
|
|
select CPU_V7
|
|
select SYS_FSL_HAS_SEC if SECURE_BOOT
|
|
select SYS_FSL_SEC_COMPAT_4
|
|
select SYS_FSL_SEC_LE
|
|
select BOARD_EARLY_INIT_F
|
|
select ARCH_MISC_INIT
|
|
imply MXC_GPIO
|
|
|
|
config ARCH_MX6
|
|
bool "Freescale MX6"
|
|
select CPU_V7
|
|
select SYS_FSL_HAS_SEC if SECURE_BOOT
|
|
select SYS_FSL_SEC_COMPAT_4
|
|
select SYS_FSL_SEC_LE
|
|
select SYS_THUMB_BUILD if SPL
|
|
imply MXC_GPIO
|
|
|
|
if ARCH_MX6
|
|
config SPL_LDSCRIPT
|
|
default "arch/arm/mach-omap2/u-boot-spl.lds"
|
|
endif
|
|
|
|
config ARCH_MX5
|
|
bool "Freescale MX5"
|
|
select CPU_V7
|
|
select BOARD_EARLY_INIT_F
|
|
imply MXC_GPIO
|
|
|
|
config ARCH_QEMU
|
|
bool "QEMU Virtual Platform"
|
|
select DM
|
|
select DM_SERIAL
|
|
select OF_CONTROL
|
|
select PL01X_SERIAL
|
|
|
|
config ARCH_RMOBILE
|
|
bool "Renesas ARM SoCs"
|
|
select DM
|
|
select DM_SERIAL
|
|
select BOARD_EARLY_INIT_F
|
|
imply FAT_WRITE
|
|
imply SYS_THUMB_BUILD
|
|
|
|
config TARGET_S32V234EVB
|
|
bool "Support s32v234evb"
|
|
select ARM64
|
|
select SYS_FSL_ERRATUM_ESDHC111
|
|
|
|
config ARCH_SNAPDRAGON
|
|
bool "Qualcomm Snapdragon SoCs"
|
|
select ARM64
|
|
select DM
|
|
select DM_GPIO
|
|
select DM_SERIAL
|
|
select SPMI
|
|
select OF_CONTROL
|
|
select OF_SEPARATE
|
|
|
|
config ARCH_SOCFPGA
|
|
bool "Altera SOCFPGA family"
|
|
select CPU_V7
|
|
select SUPPORT_SPL
|
|
select OF_CONTROL
|
|
select SPL_OF_CONTROL
|
|
select DM
|
|
select ENABLE_ARM_SOC_BOOT0_HOOK
|
|
select ARCH_EARLY_INIT_R
|
|
select ARCH_MISC_INIT
|
|
select SYS_THUMB_BUILD
|
|
imply CMD_MTDPARTS
|
|
imply CRC32_VERIFY
|
|
imply DM_SPI
|
|
imply DM_SPI_FLASH
|
|
imply FAT_WRITE
|
|
imply HW_WATCHDOG
|
|
imply SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
|
|
|
|
config ARCH_SUNXI
|
|
bool "Support sunxi (Allwinner) SoCs"
|
|
select BINMAN
|
|
select CMD_GPIO
|
|
select CMD_MMC if MMC
|
|
select CMD_USB if DISTRO_DEFAULTS
|
|
select DM
|
|
select DM_ETH
|
|
select DM_GPIO
|
|
select DM_KEYBOARD
|
|
select DM_SERIAL
|
|
select DM_USB if DISTRO_DEFAULTS
|
|
select OF_BOARD_SETUP
|
|
select OF_CONTROL
|
|
select OF_SEPARATE
|
|
select SPL_STACK_R if SPL
|
|
select SPL_SYS_MALLOC_SIMPLE if SPL
|
|
select SYS_NS16550
|
|
select SPL_SYS_THUMB_BUILD if !ARM64
|
|
select SYS_THUMB_BUILD if !ARM64
|
|
select USB if DISTRO_DEFAULTS
|
|
select USB_STORAGE if DISTRO_DEFAULTS
|
|
select USB_KEYBOARD if DISTRO_DEFAULTS
|
|
select USE_TINY_PRINTF
|
|
imply CMD_GPT
|
|
imply FAT_WRITE
|
|
imply OF_LIBFDT_OVERLAY
|
|
imply PRE_CONSOLE_BUFFER
|
|
imply SPL_GPIO_SUPPORT
|
|
imply SPL_LIBCOMMON_SUPPORT
|
|
imply SPL_LIBDISK_SUPPORT
|
|
imply SPL_LIBGENERIC_SUPPORT
|
|
imply SPL_MMC_SUPPORT if MMC
|
|
imply SPL_POWER_SUPPORT
|
|
imply SPL_SERIAL_SUPPORT
|
|
imply USB_GADGET
|
|
|
|
config ARCH_VF610
|
|
bool "Freescale Vybrid"
|
|
select CPU_V7
|
|
select SYS_FSL_ERRATUM_ESDHC111
|
|
imply CMD_MTDPARTS
|
|
imply NAND
|
|
|
|
config ARCH_ZYNQ
|
|
bool "Xilinx Zynq based platform"
|
|
select BOARD_LATE_INIT
|
|
select CPU_V7
|
|
select SUPPORT_SPL
|
|
select OF_CONTROL
|
|
select SPL_BOARD_INIT if SPL
|
|
select SPL_OF_CONTROL if SPL
|
|
select DM
|
|
select DM_ETH if NET
|
|
select SPL_DM if SPL
|
|
select DM_MMC if MMC
|
|
select DM_SPI
|
|
select DM_SERIAL
|
|
select DM_SPI_FLASH
|
|
select SPL_SEPARATE_BSS if SPL
|
|
select DM_USB if USB
|
|
select CLK
|
|
select SPL_CLK if SPL
|
|
select CLK_ZYNQ
|
|
imply CMD_CLK
|
|
imply FAT_WRITE
|
|
imply CMD_SPL
|
|
|
|
config ARCH_ZYNQMP
|
|
bool "Xilinx ZynqMP based platform"
|
|
select ARM64
|
|
select BOARD_LATE_INIT
|
|
select DM
|
|
select OF_CONTROL
|
|
select DM_SERIAL
|
|
select SUPPORT_SPL
|
|
select CLK
|
|
select SPL_BOARD_INIT if SPL
|
|
select SPL_CLK if SPL
|
|
select DM_USB if USB
|
|
imply FAT_WRITE
|
|
|
|
config TEGRA
|
|
bool "NVIDIA Tegra"
|
|
imply FAT_WRITE
|
|
|
|
config TARGET_VEXPRESS64_AEMV8A
|
|
bool "Support vexpress_aemv8a"
|
|
select ARM64
|
|
select PL01X_SERIAL
|
|
|
|
config TARGET_VEXPRESS64_BASE_FVP
|
|
bool "Support Versatile Express ARMv8a FVP BASE model"
|
|
select ARM64
|
|
select SEMIHOSTING
|
|
select PL01X_SERIAL
|
|
|
|
config TARGET_VEXPRESS64_BASE_FVP_DRAM
|
|
bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM"
|
|
select ARM64
|
|
select PL01X_SERIAL
|
|
help
|
|
This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides
|
|
the default config to allow the user to load the images directly into
|
|
DRAM using model parameters rather than by using semi-hosting to load
|
|
the files from the host filesystem.
|
|
|
|
config TARGET_VEXPRESS64_JUNO
|
|
bool "Support Versatile Express Juno Development Platform"
|
|
select ARM64
|
|
select PL01X_SERIAL
|
|
|
|
config TARGET_LS2080A_EMU
|
|
bool "Support ls2080a_emu"
|
|
select ARCH_LS2080A
|
|
select ARM64
|
|
select ARMV8_MULTIENTRY
|
|
select ARCH_MISC_INIT
|
|
help
|
|
Support for Freescale LS2080A_EMU platform
|
|
The LS2080A Development System (EMULATOR) is a pre silicon
|
|
development platform that supports the QorIQ LS2080A
|
|
Layerscape Architecture processor.
|
|
|
|
config TARGET_LS2080A_SIMU
|
|
bool "Support ls2080a_simu"
|
|
select ARCH_LS2080A
|
|
select ARM64
|
|
select ARMV8_MULTIENTRY
|
|
select ARCH_MISC_INIT
|
|
help
|
|
Support for Freescale LS2080A_SIMU platform
|
|
The LS2080A Development System (QDS) is a pre silicon
|
|
development platform that supports the QorIQ LS2080A
|
|
Layerscape Architecture processor.
|
|
|
|
config TARGET_LS1088AQDS
|
|
bool "Support ls1088aqds"
|
|
select ARCH_LS1088A
|
|
select ARM64
|
|
select ARMV8_MULTIENTRY
|
|
select ARCH_MISC_INIT
|
|
select BOARD_LATE_INIT
|
|
select SUPPORT_SPL
|
|
help
|
|
Support for NXP LS1088AQDS platform
|
|
The LS1088A Development System (QDS) is a high-performance
|
|
development platform that supports the QorIQ LS1088A
|
|
Layerscape Architecture processor.
|
|
|
|
config TARGET_LS2080AQDS
|
|
bool "Support ls2080aqds"
|
|
select ARCH_LS2080A
|
|
select ARM64
|
|
select ARMV8_MULTIENTRY
|
|
select BOARD_LATE_INIT
|
|
select SUPPORT_SPL
|
|
select ARCH_MISC_INIT
|
|
imply SCSI
|
|
imply SCSI_AHCI
|
|
help
|
|
Support for Freescale LS2080AQDS platform
|
|
The LS2080A Development System (QDS) is a high-performance
|
|
development platform that supports the QorIQ LS2080A
|
|
Layerscape Architecture processor.
|
|
|
|
config TARGET_LS2080ARDB
|
|
bool "Support ls2080ardb"
|
|
select ARCH_LS2080A
|
|
select ARM64
|
|
select ARMV8_MULTIENTRY
|
|
select BOARD_LATE_INIT
|
|
select SUPPORT_SPL
|
|
select ARCH_MISC_INIT
|
|
imply SCSI
|
|
imply SCSI_AHCI
|
|
help
|
|
Support for Freescale LS2080ARDB platform.
|
|
The LS2080A Reference design board (RDB) is a high-performance
|
|
development platform that supports the QorIQ LS2080A
|
|
Layerscape Architecture processor.
|
|
|
|
config TARGET_LS2081ARDB
|
|
bool "Support ls2081ardb"
|
|
select ARCH_LS2080A
|
|
select ARM64
|
|
select ARMV8_MULTIENTRY
|
|
select BOARD_LATE_INIT
|
|
select SUPPORT_SPL
|
|
select ARCH_MISC_INIT
|
|
help
|
|
Support for Freescale LS2081ARDB platform.
|
|
The LS2081A Reference design board (RDB) is a high-performance
|
|
development platform that supports the QorIQ LS2081A/LS2041A
|
|
Layerscape Architecture processor.
|
|
|
|
config TARGET_HIKEY
|
|
bool "Support HiKey 96boards Consumer Edition Platform"
|
|
select ARM64
|
|
select DM
|
|
select DM_GPIO
|
|
select DM_SERIAL
|
|
select OF_CONTROL
|
|
select PL01X_SERIAL
|
|
help
|
|
Support for HiKey 96boards platform. It features a HI6220
|
|
SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM.
|
|
|
|
config TARGET_POPLAR
|
|
bool "Support Poplar 96boards Enterprise Edition Platform"
|
|
select ARM64
|
|
select DM
|
|
select OF_CONTROL
|
|
select DM_SERIAL
|
|
select DM_USB
|
|
select PL01X_SERIAL
|
|
help
|
|
Support for Poplar 96boards EE platform. It features a HI3798cv200
|
|
SoC, with 4xA53 CPU, 1GB RAM and the high performance Mali T720 GPU
|
|
making it capable of running any commercial set-top solution based on
|
|
Linux or Android.
|
|
|
|
config TARGET_LS1012AQDS
|
|
bool "Support ls1012aqds"
|
|
select ARCH_LS1012A
|
|
select ARM64
|
|
select BOARD_LATE_INIT
|
|
help
|
|
Support for Freescale LS1012AQDS platform.
|
|
The LS1012A Development System (QDS) is a high-performance
|
|
development platform that supports the QorIQ LS1012A
|
|
Layerscape Architecture processor.
|
|
|
|
config TARGET_LS1012ARDB
|
|
bool "Support ls1012ardb"
|
|
select ARCH_LS1012A
|
|
select ARM64
|
|
select BOARD_LATE_INIT
|
|
imply SCSI
|
|
imply SCSI_AHCI
|
|
help
|
|
Support for Freescale LS1012ARDB platform.
|
|
The LS1012A Reference design board (RDB) is a high-performance
|
|
development platform that supports the QorIQ LS1012A
|
|
Layerscape Architecture processor.
|
|
|
|
config TARGET_LS1012A2G5RDB
|
|
bool "Support ls1012a2g5rdb"
|
|
select ARCH_LS1012A
|
|
select ARM64
|
|
select BOARD_LATE_INIT
|
|
imply SCSI
|
|
help
|
|
Support for Freescale LS1012A2G5RDB platform.
|
|
The LS1012A 2G5 Reference design board (RDB) is a high-performance
|
|
development platform that supports the QorIQ LS1012A
|
|
Layerscape Architecture processor.
|
|
|
|
config TARGET_LS1012AFRDM
|
|
bool "Support ls1012afrdm"
|
|
select ARCH_LS1012A
|
|
select ARM64
|
|
help
|
|
Support for Freescale LS1012AFRDM platform.
|
|
The LS1012A Freedom board (FRDM) is a high-performance
|
|
development platform that supports the QorIQ LS1012A
|
|
Layerscape Architecture processor.
|
|
|
|
config TARGET_LS1088ARDB
|
|
bool "Support ls1088ardb"
|
|
select ARCH_LS1088A
|
|
select ARM64
|
|
select ARMV8_MULTIENTRY
|
|
select ARCH_MISC_INIT
|
|
select BOARD_LATE_INIT
|
|
select SUPPORT_SPL
|
|
help
|
|
Support for NXP LS1088ARDB platform.
|
|
The LS1088A Reference design board (RDB) is a high-performance
|
|
development platform that supports the QorIQ LS1088A
|
|
Layerscape Architecture processor.
|
|
|
|
config TARGET_LS1021AQDS
|
|
bool "Support ls1021aqds"
|
|
select BOARD_LATE_INIT
|
|
select CPU_V7
|
|
select CPU_V7_HAS_NONSEC
|
|
select CPU_V7_HAS_VIRT
|
|
select SUPPORT_SPL
|
|
select ARCH_LS1021A
|
|
select ARCH_SUPPORT_PSCI
|
|
select LS1_DEEP_SLEEP
|
|
select SYS_FSL_DDR
|
|
select BOARD_EARLY_INIT_F
|
|
imply SCSI
|
|
|
|
config TARGET_LS1021ATWR
|
|
bool "Support ls1021atwr"
|
|
select BOARD_LATE_INIT
|
|
select CPU_V7
|
|
select CPU_V7_HAS_NONSEC
|
|
select CPU_V7_HAS_VIRT
|
|
select SUPPORT_SPL
|
|
select ARCH_LS1021A
|
|
select ARCH_SUPPORT_PSCI
|
|
select LS1_DEEP_SLEEP
|
|
select BOARD_EARLY_INIT_F
|
|
imply SCSI
|
|
|
|
config TARGET_LS1021AIOT
|
|
bool "Support ls1021aiot"
|
|
select BOARD_LATE_INIT
|
|
select CPU_V7
|
|
select CPU_V7_HAS_NONSEC
|
|
select CPU_V7_HAS_VIRT
|
|
select SUPPORT_SPL
|
|
select ARCH_LS1021A
|
|
select ARCH_SUPPORT_PSCI
|
|
imply SCSI
|
|
help
|
|
Support for Freescale LS1021AIOT platform.
|
|
The LS1021A Freescale board (IOT) is a high-performance
|
|
development platform that supports the QorIQ LS1021A
|
|
Layerscape Architecture processor.
|
|
|
|
config TARGET_LS1043AQDS
|
|
bool "Support ls1043aqds"
|
|
select ARCH_LS1043A
|
|
select ARM64
|
|
select ARMV8_MULTIENTRY
|
|
select BOARD_LATE_INIT
|
|
select SUPPORT_SPL
|
|
select BOARD_EARLY_INIT_F
|
|
imply SCSI
|
|
help
|
|
Support for Freescale LS1043AQDS platform.
|
|
|
|
config TARGET_LS1043ARDB
|
|
bool "Support ls1043ardb"
|
|
select ARCH_LS1043A
|
|
select ARM64
|
|
select ARMV8_MULTIENTRY
|
|
select BOARD_LATE_INIT
|
|
select SUPPORT_SPL
|
|
select BOARD_EARLY_INIT_F
|
|
imply SCSI
|
|
help
|
|
Support for Freescale LS1043ARDB platform.
|
|
|
|
config TARGET_LS1046AQDS
|
|
bool "Support ls1046aqds"
|
|
select ARCH_LS1046A
|
|
select ARM64
|
|
select ARMV8_MULTIENTRY
|
|
select BOARD_LATE_INIT
|
|
select SUPPORT_SPL
|
|
select DM_SPI_FLASH if DM_SPI
|
|
select BOARD_EARLY_INIT_F
|
|
imply SCSI
|
|
help
|
|
Support for Freescale LS1046AQDS platform.
|
|
The LS1046A Development System (QDS) is a high-performance
|
|
development platform that supports the QorIQ LS1046A
|
|
Layerscape Architecture processor.
|
|
|
|
config TARGET_LS1046ARDB
|
|
bool "Support ls1046ardb"
|
|
select ARCH_LS1046A
|
|
select ARM64
|
|
select ARMV8_MULTIENTRY
|
|
select BOARD_LATE_INIT
|
|
select SUPPORT_SPL
|
|
select DM_SPI_FLASH if DM_SPI
|
|
select POWER_MC34VR500
|
|
select BOARD_EARLY_INIT_F
|
|
imply SCSI
|
|
help
|
|
Support for Freescale LS1046ARDB platform.
|
|
The LS1046A Reference Design Board (RDB) is a high-performance
|
|
development platform that supports the QorIQ LS1046A
|
|
Layerscape Architecture processor.
|
|
|
|
config TARGET_H2200
|
|
bool "Support h2200"
|
|
select CPU_PXA
|
|
|
|
config TARGET_ZIPITZ2
|
|
bool "Support zipitz2"
|
|
select CPU_PXA
|
|
|
|
config TARGET_COLIBRI_PXA270
|
|
bool "Support colibri_pxa270"
|
|
select CPU_PXA
|
|
|
|
config ARCH_UNIPHIER
|
|
bool "Socionext UniPhier SoCs"
|
|
select BOARD_LATE_INIT
|
|
select DM
|
|
select DM_GPIO
|
|
select DM_I2C
|
|
select DM_MMC
|
|
select DM_RESET
|
|
select DM_SERIAL
|
|
select DM_USB
|
|
select OF_CONTROL
|
|
select OF_LIBFDT
|
|
select PINCTRL
|
|
select SPL_BOARD_INIT if SPL
|
|
select SPL_DM if SPL
|
|
select SPL_LIBCOMMON_SUPPORT if SPL
|
|
select SPL_LIBGENERIC_SUPPORT if SPL
|
|
select SPL_OF_CONTROL if SPL
|
|
select SPL_PINCTRL if SPL
|
|
select SUPPORT_SPL
|
|
imply FAT_WRITE
|
|
help
|
|
Support for UniPhier SoC family developed by Socionext Inc.
|
|
(formerly, System LSI Business Division of Panasonic Corporation)
|
|
|
|
config STM32
|
|
bool "Support STM32"
|
|
select CPU_V7M
|
|
select DM
|
|
select DM_SERIAL
|
|
select SYS_THUMB_BUILD
|
|
|
|
config ARCH_STI
|
|
bool "Support STMicrolectronics SoCs"
|
|
select CPU_V7
|
|
select DM
|
|
select DM_SERIAL
|
|
select BLK
|
|
select DM_MMC
|
|
select DM_RESET
|
|
help
|
|
Support for STMicroelectronics STiH407/10 SoC family.
|
|
This SoC is used on Linaro 96Board STiH410-B2260
|
|
|
|
config ARCH_ROCKCHIP
|
|
bool "Support Rockchip SoCs"
|
|
select OF_CONTROL
|
|
select BLK
|
|
select DM
|
|
select SPL_DM if SPL
|
|
select SYS_MALLOC_F
|
|
select SYS_THUMB_BUILD if !ARM64
|
|
select SPL_SYS_MALLOC_SIMPLE if SPL
|
|
select DM_GPIO
|
|
select DM_I2C
|
|
select DM_MMC
|
|
select DM_SERIAL
|
|
select DM_SPI
|
|
select DM_SPI_FLASH
|
|
select DM_USB if USB
|
|
select DM_PWM
|
|
select DM_REGULATOR
|
|
select ENABLE_ARM_SOC_BOOT0_HOOK
|
|
imply CMD_FASTBOOT
|
|
imply FASTBOOT
|
|
imply FAT_WRITE
|
|
imply USB_FUNCTION_FASTBOOT
|
|
imply SPL_SYSRESET
|
|
imply TPL_SYSRESET
|
|
imply ADC
|
|
imply SARADC_ROCKCHIP
|
|
|
|
config TARGET_THUNDERX_88XX
|
|
bool "Support ThunderX 88xx"
|
|
select ARM64
|
|
select OF_CONTROL
|
|
select SYS_CACHE_SHIFT_7
|
|
select PL01X_SERIAL
|
|
|
|
config ARCH_ASPEED
|
|
bool "Support Aspeed SoCs"
|
|
select OF_CONTROL
|
|
select DM
|
|
|
|
endchoice
|
|
|
|
source "arch/arm/mach-aspeed/Kconfig"
|
|
|
|
source "arch/arm/mach-at91/Kconfig"
|
|
|
|
source "arch/arm/mach-bcm283x/Kconfig"
|
|
|
|
source "arch/arm/mach-davinci/Kconfig"
|
|
|
|
source "arch/arm/mach-exynos/Kconfig"
|
|
|
|
source "arch/arm/mach-highbank/Kconfig"
|
|
|
|
source "arch/arm/mach-integrator/Kconfig"
|
|
|
|
source "arch/arm/mach-keystone/Kconfig"
|
|
|
|
source "arch/arm/mach-kirkwood/Kconfig"
|
|
|
|
source "arch/arm/mach-mvebu/Kconfig"
|
|
|
|
source "arch/arm/cpu/armv7/ls102xa/Kconfig"
|
|
|
|
source "arch/arm/mach-imx/mx2/Kconfig"
|
|
|
|
source "arch/arm/mach-imx/mx5/Kconfig"
|
|
|
|
source "arch/arm/mach-imx/mx6/Kconfig"
|
|
|
|
source "arch/arm/mach-imx/mx7/Kconfig"
|
|
|
|
source "arch/arm/mach-imx/mx7ulp/Kconfig"
|
|
|
|
source "arch/arm/mach-imx/mx8m/Kconfig"
|
|
|
|
source "arch/arm/mach-imx/mxs/Kconfig"
|
|
|
|
source "arch/arm/mach-omap2/Kconfig"
|
|
|
|
source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig"
|
|
|
|
source "arch/arm/mach-orion5x/Kconfig"
|
|
|
|
source "arch/arm/mach-rmobile/Kconfig"
|
|
|
|
source "arch/arm/mach-meson/Kconfig"
|
|
|
|
source "arch/arm/mach-qemu/Kconfig"
|
|
|
|
source "arch/arm/mach-rockchip/Kconfig"
|
|
|
|
source "arch/arm/mach-s5pc1xx/Kconfig"
|
|
|
|
source "arch/arm/mach-snapdragon/Kconfig"
|
|
|
|
source "arch/arm/mach-socfpga/Kconfig"
|
|
|
|
source "arch/arm/mach-sti/Kconfig"
|
|
|
|
source "arch/arm/mach-stm32/Kconfig"
|
|
|
|
source "arch/arm/mach-sunxi/Kconfig"
|
|
|
|
source "arch/arm/mach-tegra/Kconfig"
|
|
|
|
source "arch/arm/mach-uniphier/Kconfig"
|
|
|
|
source "arch/arm/cpu/armv7/vf610/Kconfig"
|
|
|
|
source "arch/arm/mach-zynq/Kconfig"
|
|
|
|
source "arch/arm/cpu/armv7/Kconfig"
|
|
|
|
source "arch/arm/cpu/armv8/zynqmp/Kconfig"
|
|
|
|
source "arch/arm/cpu/armv8/Kconfig"
|
|
|
|
source "arch/arm/mach-imx/Kconfig"
|
|
|
|
source "board/bosch/shc/Kconfig"
|
|
source "board/CarMediaLab/flea3/Kconfig"
|
|
source "board/Marvell/aspenite/Kconfig"
|
|
source "board/Marvell/gplugd/Kconfig"
|
|
source "board/armadeus/apf27/Kconfig"
|
|
source "board/armltd/vexpress/Kconfig"
|
|
source "board/armltd/vexpress64/Kconfig"
|
|
source "board/broadcom/bcm23550_w1d/Kconfig"
|
|
source "board/broadcom/bcm28155_ap/Kconfig"
|
|
source "board/broadcom/bcmcygnus/Kconfig"
|
|
source "board/broadcom/bcmnsp/Kconfig"
|
|
source "board/broadcom/bcmns2/Kconfig"
|
|
source "board/cavium/thunderx/Kconfig"
|
|
source "board/cirrus/edb93xx/Kconfig"
|
|
source "board/eets/pdu001/Kconfig"
|
|
source "board/freescale/ls2080a/Kconfig"
|
|
source "board/freescale/ls2080aqds/Kconfig"
|
|
source "board/freescale/ls2080ardb/Kconfig"
|
|
source "board/freescale/ls1088a/Kconfig"
|
|
source "board/freescale/ls1021aqds/Kconfig"
|
|
source "board/freescale/ls1043aqds/Kconfig"
|
|
source "board/freescale/ls1021atwr/Kconfig"
|
|
source "board/freescale/ls1021aiot/Kconfig"
|
|
source "board/freescale/ls1046aqds/Kconfig"
|
|
source "board/freescale/ls1043ardb/Kconfig"
|
|
source "board/freescale/ls1046ardb/Kconfig"
|
|
source "board/freescale/ls1012aqds/Kconfig"
|
|
source "board/freescale/ls1012ardb/Kconfig"
|
|
source "board/freescale/ls1012afrdm/Kconfig"
|
|
source "board/freescale/mx31ads/Kconfig"
|
|
source "board/freescale/mx31pdk/Kconfig"
|
|
source "board/freescale/mx35pdk/Kconfig"
|
|
source "board/freescale/s32v234evb/Kconfig"
|
|
source "board/gdsys/a38x/Kconfig"
|
|
source "board/grinn/chiliboard/Kconfig"
|
|
source "board/gumstix/pepper/Kconfig"
|
|
source "board/h2200/Kconfig"
|
|
source "board/hisilicon/hikey/Kconfig"
|
|
source "board/hisilicon/poplar/Kconfig"
|
|
source "board/imx31_phycore/Kconfig"
|
|
source "board/isee/igep003x/Kconfig"
|
|
source "board/phytec/pcm051/Kconfig"
|
|
source "board/silica/pengwyn/Kconfig"
|
|
source "board/spear/spear300/Kconfig"
|
|
source "board/spear/spear310/Kconfig"
|
|
source "board/spear/spear320/Kconfig"
|
|
source "board/spear/spear600/Kconfig"
|
|
source "board/spear/x600/Kconfig"
|
|
source "board/st/stv0991/Kconfig"
|
|
source "board/tcl/sl50/Kconfig"
|
|
source "board/birdland/bav335x/Kconfig"
|
|
source "board/timll/devkit3250/Kconfig"
|
|
source "board/toradex/colibri_pxa270/Kconfig"
|
|
source "board/vscom/baltos/Kconfig"
|
|
source "board/woodburn/Kconfig"
|
|
source "board/work-microwave/work_92105/Kconfig"
|
|
source "board/zipitz2/Kconfig"
|
|
|
|
source "arch/arm/Kconfig.debug"
|
|
|
|
endmenu
|
|
|
|
config SPL_LDSCRIPT
|
|
default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if ARCH_MX23 || ARCH_MX28
|
|
default "arch/arm/cpu/arm1136/u-boot-spl.lds" if CPU_ARM1136
|
|
default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARM64
|
|
|
|
|