mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-06-09 23:36:03 +09:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
246 lines
6.3 KiB
ArmAsm
246 lines
6.3 KiB
ArmAsm
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Memory Setup stuff - taken from blob memsetup.S
|
|
*
|
|
* Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and
|
|
* Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl)
|
|
*
|
|
* Copyright (C) 2008 Ronetix Ilko Iliev (www.ronetix.at)
|
|
* Copyright (C) 2009 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
|
|
*/
|
|
|
|
#include <config.h>
|
|
#include <asm/arch/hardware.h>
|
|
#include <asm/arch/at91_pmc.h>
|
|
#include <asm/arch/at91_wdt.h>
|
|
#include <asm/arch/at91_pio.h>
|
|
#include <asm/arch/at91_matrix.h>
|
|
#include <asm/arch/at91sam9_sdramc.h>
|
|
#include <asm/arch/at91sam9_smc.h>
|
|
#include <asm/arch/at91_rstc.h>
|
|
#ifdef CONFIG_ATMEL_LEGACY
|
|
#include <asm/arch/at91sam9_matrix.h>
|
|
#endif
|
|
#ifndef CONFIG_SYS_MATRIX_EBICSA_VAL
|
|
#define CONFIG_SYS_MATRIX_EBICSA_VAL CONFIG_SYS_MATRIX_EBI0CSA_VAL
|
|
#endif
|
|
|
|
.globl lowlevel_init
|
|
.type lowlevel_init,function
|
|
lowlevel_init:
|
|
|
|
POS1:
|
|
adr r5, POS1 /* r5 = POS1 run time */
|
|
ldr r0, =POS1 /* r0 = POS1 compile */
|
|
sub r5, r5, r0 /* r0 = CONFIG_SYS_TEXT_BASE-1 */
|
|
|
|
/* memory control configuration 1 */
|
|
ldr r0, =SMRDATA
|
|
ldr r2, =SMRDATA1
|
|
add r0, r0, r5
|
|
add r2, r2, r5
|
|
0:
|
|
/* the address */
|
|
ldr r1, [r0], #4
|
|
/* the value */
|
|
ldr r3, [r0], #4
|
|
str r3, [r1]
|
|
cmp r2, r0
|
|
bne 0b
|
|
|
|
/* ----------------------------------------------------------------------------
|
|
* PMC Init Step 1.
|
|
* ----------------------------------------------------------------------------
|
|
* - Check if the PLL is already initialized
|
|
* ----------------------------------------------------------------------------
|
|
*/
|
|
ldr r1, =(AT91_ASM_PMC_MCKR)
|
|
ldr r0, [r1]
|
|
and r0, r0, #3
|
|
cmp r0, #0
|
|
bne PLL_setup_end
|
|
|
|
/* ---------------------------------------------------------------------------
|
|
* - Enable the Main Oscillator
|
|
* ---------------------------------------------------------------------------
|
|
*/
|
|
ldr r1, =(AT91_ASM_PMC_MOR)
|
|
ldr r2, =(AT91_ASM_PMC_SR)
|
|
/* Main oscillator Enable register PMC_MOR: */
|
|
ldr r0, =CONFIG_SYS_MOR_VAL
|
|
str r0, [r1]
|
|
|
|
/* Reading the PMC Status to detect when the Main Oscillator is enabled */
|
|
mov r4, #AT91_PMC_IXR_MOSCS
|
|
MOSCS_Loop:
|
|
ldr r3, [r2]
|
|
and r3, r4, r3
|
|
cmp r3, #AT91_PMC_IXR_MOSCS
|
|
bne MOSCS_Loop
|
|
|
|
/* ----------------------------------------------------------------------------
|
|
* PMC Init Step 2.
|
|
* ----------------------------------------------------------------------------
|
|
* Setup PLLA
|
|
* ----------------------------------------------------------------------------
|
|
*/
|
|
ldr r1, =(AT91_ASM_PMC_PLLAR)
|
|
ldr r0, =CONFIG_SYS_PLLAR_VAL
|
|
str r0, [r1]
|
|
|
|
/* Reading the PMC Status register to detect when the PLLA is locked */
|
|
mov r4, #AT91_PMC_IXR_LOCKA
|
|
MOSCS_Loop1:
|
|
ldr r3, [r2]
|
|
and r3, r4, r3
|
|
cmp r3, #AT91_PMC_IXR_LOCKA
|
|
bne MOSCS_Loop1
|
|
|
|
/* ----------------------------------------------------------------------------
|
|
* PMC Init Step 3.
|
|
* ----------------------------------------------------------------------------
|
|
* - Switch on the Main Oscillator
|
|
* ----------------------------------------------------------------------------
|
|
*/
|
|
ldr r1, =(AT91_ASM_PMC_MCKR)
|
|
|
|
/* -Master Clock Controller register PMC_MCKR */
|
|
ldr r0, =CONFIG_SYS_MCKR1_VAL
|
|
str r0, [r1]
|
|
|
|
/* Reading the PMC Status to detect when the Master clock is ready */
|
|
mov r4, #AT91_PMC_IXR_MCKRDY
|
|
MCKRDY_Loop:
|
|
ldr r3, [r2]
|
|
and r3, r4, r3
|
|
cmp r3, #AT91_PMC_IXR_MCKRDY
|
|
bne MCKRDY_Loop
|
|
|
|
ldr r0, =CONFIG_SYS_MCKR2_VAL
|
|
str r0, [r1]
|
|
|
|
/* Reading the PMC Status to detect when the Master clock is ready */
|
|
mov r4, #AT91_PMC_IXR_MCKRDY
|
|
MCKRDY_Loop1:
|
|
ldr r3, [r2]
|
|
and r3, r4, r3
|
|
cmp r3, #AT91_PMC_IXR_MCKRDY
|
|
bne MCKRDY_Loop1
|
|
PLL_setup_end:
|
|
|
|
/* ----------------------------------------------------------------------------
|
|
* - memory control configuration 2
|
|
* ----------------------------------------------------------------------------
|
|
*/
|
|
ldr r0, =(AT91_ASM_SDRAMC_TR)
|
|
ldr r1, [r0]
|
|
cmp r1, #0
|
|
bne SDRAM_setup_end
|
|
|
|
ldr r0, =SMRDATA1
|
|
ldr r2, =SMRDATA2
|
|
add r0, r0, r5
|
|
add r2, r2, r5
|
|
2:
|
|
/* the address */
|
|
ldr r1, [r0], #4
|
|
/* the value */
|
|
ldr r3, [r0], #4
|
|
str r3, [r1]
|
|
cmp r2, r0
|
|
bne 2b
|
|
|
|
SDRAM_setup_end:
|
|
/* everything is fine now */
|
|
mov pc, lr
|
|
|
|
.ltorg
|
|
|
|
SMRDATA:
|
|
.word AT91_ASM_WDT_MR
|
|
.word CONFIG_SYS_WDTC_WDMR_VAL
|
|
/* configure PIOx as EBI0 D[16-31] */
|
|
#if defined(CONFIG_AT91SAM9263)
|
|
.word AT91_ASM_PIOD_PDR
|
|
.word CONFIG_SYS_PIOD_PDR_VAL1
|
|
.word AT91_ASM_PIOD_PUDR
|
|
.word CONFIG_SYS_PIOD_PPUDR_VAL
|
|
.word AT91_ASM_PIOD_ASR
|
|
.word CONFIG_SYS_PIOD_PPUDR_VAL
|
|
#elif defined(CONFIG_AT91SAM9260) || defined(CONFIG_AT91SAM9261) \
|
|
|| defined(CONFIG_AT91SAM9G20)
|
|
.word AT91_ASM_PIOC_PDR
|
|
.word CONFIG_SYS_PIOC_PDR_VAL1
|
|
.word AT91_ASM_PIOC_PUDR
|
|
.word CONFIG_SYS_PIOC_PPUDR_VAL
|
|
#endif
|
|
.word AT91_ASM_MATRIX_CSA0
|
|
.word CONFIG_SYS_MATRIX_EBICSA_VAL
|
|
|
|
/* flash */
|
|
.word AT91_ASM_SMC_MODE0
|
|
.word CONFIG_SYS_SMC0_MODE0_VAL
|
|
|
|
.word AT91_ASM_SMC_CYCLE0
|
|
.word CONFIG_SYS_SMC0_CYCLE0_VAL
|
|
|
|
.word AT91_ASM_SMC_PULSE0
|
|
.word CONFIG_SYS_SMC0_PULSE0_VAL
|
|
|
|
.word AT91_ASM_SMC_SETUP0
|
|
.word CONFIG_SYS_SMC0_SETUP0_VAL
|
|
|
|
SMRDATA1:
|
|
.word AT91_ASM_SDRAMC_MR
|
|
.word CONFIG_SYS_SDRC_MR_VAL1
|
|
.word AT91_ASM_SDRAMC_TR
|
|
.word CONFIG_SYS_SDRC_TR_VAL1
|
|
.word AT91_ASM_SDRAMC_CR
|
|
.word CONFIG_SYS_SDRC_CR_VAL
|
|
.word AT91_ASM_SDRAMC_MDR
|
|
.word CONFIG_SYS_SDRC_MDR_VAL
|
|
.word AT91_ASM_SDRAMC_MR
|
|
.word CONFIG_SYS_SDRC_MR_VAL2
|
|
.word CONFIG_SYS_SDRAM_BASE
|
|
.word CONFIG_SYS_SDRAM_VAL1
|
|
.word AT91_ASM_SDRAMC_MR
|
|
.word CONFIG_SYS_SDRC_MR_VAL3
|
|
.word CONFIG_SYS_SDRAM_BASE
|
|
.word CONFIG_SYS_SDRAM_VAL2
|
|
.word CONFIG_SYS_SDRAM_BASE
|
|
.word CONFIG_SYS_SDRAM_VAL3
|
|
.word CONFIG_SYS_SDRAM_BASE
|
|
.word CONFIG_SYS_SDRAM_VAL4
|
|
.word CONFIG_SYS_SDRAM_BASE
|
|
.word CONFIG_SYS_SDRAM_VAL5
|
|
.word CONFIG_SYS_SDRAM_BASE
|
|
.word CONFIG_SYS_SDRAM_VAL6
|
|
.word CONFIG_SYS_SDRAM_BASE
|
|
.word CONFIG_SYS_SDRAM_VAL7
|
|
.word CONFIG_SYS_SDRAM_BASE
|
|
.word CONFIG_SYS_SDRAM_VAL8
|
|
.word CONFIG_SYS_SDRAM_BASE
|
|
.word CONFIG_SYS_SDRAM_VAL9
|
|
.word AT91_ASM_SDRAMC_MR
|
|
.word CONFIG_SYS_SDRC_MR_VAL4
|
|
.word CONFIG_SYS_SDRAM_BASE
|
|
.word CONFIG_SYS_SDRAM_VAL10
|
|
.word AT91_ASM_SDRAMC_MR
|
|
.word CONFIG_SYS_SDRC_MR_VAL5
|
|
.word CONFIG_SYS_SDRAM_BASE
|
|
.word CONFIG_SYS_SDRAM_VAL11
|
|
.word AT91_ASM_SDRAMC_TR
|
|
.word CONFIG_SYS_SDRC_TR_VAL2
|
|
.word CONFIG_SYS_SDRAM_BASE
|
|
.word CONFIG_SYS_SDRAM_VAL12
|
|
/* User reset enable*/
|
|
.word AT91_ASM_RSTC_MR
|
|
.word CONFIG_SYS_RSTC_RMR_VAL
|
|
#ifdef CONFIG_SYS_MATRIX_MCFG_REMAP
|
|
/* MATRIX_MCFG - REMAP all masters */
|
|
.word AT91_ASM_MATRIX_MCFG
|
|
.word 0x1FF
|
|
#endif
|
|
SMRDATA2:
|
|
.word 0
|