u-boot-brain/arch
Jianchao Wang 8782122052 Add support for the NXP LS1021A-TSN board
The LS1021A-TSN is a development board built by VVDN/Argonboards in
partnership with NXP.

It features the LS1021A SoC and the first-generation SJA1105T Ethernet
switch for prototyping implementations of a subset of IEEE 802.1 TSN
standards.

Supported boot media: microSD card (via SPL), QSPI flash.

Rev. A of the board uses a Spansion S25FL512S_256K serial flash, which
is 64 MB in size and has an erase sector size of 256KB (therefore,
flashing the RCW would erase part of U-Boot).

Rev. B and C of the board use a Spansion S25FL256S1 serial flash, which
is only 32 MB in size but has an erase sector size of 64KB (therefore
the RCW image can be flashed without erasing U-Boot).

To avoid the problems above, the U-Boot base address has been selected
at 0x100000 (the start of the 5th 256KB erase sector), which works for
all board revisions. Actually 0x40000 would have been enough, but
0x100000 is common for all Layerscape devices.

eTSEC3 is connecting directly to SJA1105 via an RGMII fixed-link, but
SJA1105 is currently not supported by uboot. Therefore, eTSEC3 is
disabled.

Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
Signed-off-by: Mingkai Hu <mingkai.hu@nxp.com>
Signed-off-by: Jianchao Wang <jianchao.wang@nxp.com>
Signed-off-by: Changming Huang <jerry.huang@nxp.com>
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>

[Vladimir] Code taken from https://github.com/openil/u-boot (which
itself is mostly copied from ls1021a-iot) and adapted with the following
changes:

- Add a008850 errata workaround
- Converted eTSEC, MMC to DM to avoid all build warnings
- Plugged in distro boot feature, including support for extlinux.conf
- Added defconfig for QSPI boot
- Added the board/freescale/ls1021atsn/README.rst for initial setup
- Increased CONFIG_SYS_MONITOR_LEN so that the SPL malloc pool does not
  get overwritten during copying of the u-boot.bin payload from MMC to
  DDR.
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2019-07-25 13:13:31 -05:00
..
arc CONFIG_SPL_SYS_[DI]CACHE_OFF: add 2019-05-18 08:15:35 -04:00
arm Add support for the NXP LS1021A-TSN board 2019-07-25 13:13:31 -05:00
m68k Convert to use fsl_esdhc_imx for i.MX platforms 2019-06-23 14:18:34 +08:00
microblaze spl: fix linker size check off-by-one errors 2019-05-05 08:48:50 -04:00
mips mips: mt76xx: Implement new d-cache fix in last_stage_init() 2019-07-05 17:12:27 +02:00
nds32 CONFIG_SPL_SYS_[DI]CACHE_OFF: add 2019-05-18 08:15:35 -04:00
nios2 .gitignore: move *.dtb and *.dtb.S patterns to the top-level .gitignore 2018-06-18 14:43:12 -04:00
powerpc km: modify Kconfig file organization for KM boards 2019-07-11 10:58:03 +02:00
riscv efi_loader: use predefined constants in crt0_*_efi.S 2019-07-16 22:17:14 +00:00
sandbox - add rtc driver for stm32mp1 2019-07-23 14:16:21 -04:00
sh sh: r0p7734: Remove the board 2019-06-14 12:42:06 +02:00
x86 x86: Add a forward struct declaration in coreboot_tables.h 2019-07-10 16:52:58 -06:00
xtensa CONFIG_SPL_SYS_[DI]CACHE_OFF: add 2019-05-18 08:15:35 -04:00
.gitignore
Kconfig test: dm: add a test for MDIO MUX DM uclass 2019-07-18 16:37:13 -05:00