mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-19 08:28:51 +09:00
![Tom Rini](/assets/img/avatar_default.png)
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
281 lines
5.5 KiB
ArmAsm
281 lines
5.5 KiB
ArmAsm
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Startup Code for MIPS32 CPU-core
|
|
*
|
|
* Copyright (c) 2003 Wolfgang Denk <wd@denx.de>
|
|
*/
|
|
|
|
#include <asm-offsets.h>
|
|
#include <config.h>
|
|
#include <asm/asm.h>
|
|
#include <asm/regdef.h>
|
|
#include <asm/mipsregs.h>
|
|
|
|
#ifndef CONFIG_SYS_INIT_SP_ADDR
|
|
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + \
|
|
CONFIG_SYS_INIT_SP_OFFSET)
|
|
#endif
|
|
|
|
#ifdef CONFIG_32BIT
|
|
# define MIPS_RELOC 3
|
|
# define STATUS_SET 0
|
|
#endif
|
|
|
|
#ifdef CONFIG_64BIT
|
|
# ifdef CONFIG_SYS_LITTLE_ENDIAN
|
|
# define MIPS64_R_INFO(ssym, r_type3, r_type2, r_type) \
|
|
(((r_type) << 24) | ((r_type2) << 16) | ((r_type3) << 8) | (ssym))
|
|
# else
|
|
# define MIPS64_R_INFO(ssym, r_type3, r_type2, r_type) \
|
|
((r_type) | ((r_type2) << 8) | ((r_type3) << 16) | (ssym) << 24)
|
|
# endif
|
|
# define MIPS_RELOC MIPS64_R_INFO(0x00, 0x00, 0x12, 0x03)
|
|
# define STATUS_SET ST0_KX
|
|
#endif
|
|
|
|
.set noreorder
|
|
|
|
.macro init_wr sel
|
|
MTC0 zero, CP0_WATCHLO,\sel
|
|
mtc0 t1, CP0_WATCHHI,\sel
|
|
mfc0 t0, CP0_WATCHHI,\sel
|
|
bgez t0, wr_done
|
|
nop
|
|
.endm
|
|
|
|
.macro uhi_mips_exception
|
|
move k0, t9 # preserve t9 in k0
|
|
move k1, a0 # preserve a0 in k1
|
|
li t9, 15 # UHI exception operation
|
|
li a0, 0 # Use hard register context
|
|
sdbbp 1 # Invoke UHI operation
|
|
.endm
|
|
|
|
.macro setup_stack_gd
|
|
li t0, -16
|
|
PTR_LI t1, CONFIG_SYS_INIT_SP_ADDR
|
|
and sp, t1, t0 # force 16 byte alignment
|
|
PTR_SUBU \
|
|
sp, sp, GD_SIZE # reserve space for gd
|
|
and sp, sp, t0 # force 16 byte alignment
|
|
move k0, sp # save gd pointer
|
|
#if CONFIG_VAL(SYS_MALLOC_F_LEN)
|
|
li t2, CONFIG_VAL(SYS_MALLOC_F_LEN)
|
|
PTR_SUBU \
|
|
sp, sp, t2 # reserve space for early malloc
|
|
and sp, sp, t0 # force 16 byte alignment
|
|
#endif
|
|
move fp, sp
|
|
|
|
/* Clear gd */
|
|
move t0, k0
|
|
1:
|
|
PTR_S zero, 0(t0)
|
|
blt t0, t1, 1b
|
|
PTR_ADDIU t0, PTRSIZE
|
|
|
|
#if CONFIG_VAL(SYS_MALLOC_F_LEN)
|
|
PTR_S sp, GD_MALLOC_BASE(k0) # gd->malloc_base offset
|
|
#endif
|
|
.endm
|
|
|
|
ENTRY(_start)
|
|
/* U-Boot entry point */
|
|
b reset
|
|
mtc0 zero, CP0_COUNT # clear cp0 count for most accurate boot timing
|
|
|
|
#if defined(CONFIG_SYS_XWAY_EBU_BOOTCFG)
|
|
/*
|
|
* Almost all Lantiq XWAY SoC devices have an external bus unit (EBU) to
|
|
* access external NOR flashes. If the board boots from NOR flash the
|
|
* internal BootROM does a blind read at address 0xB0000010 to read the
|
|
* initial configuration for that EBU in order to access the flash
|
|
* device with correct parameters. This config option is board-specific.
|
|
*/
|
|
.org 0x10
|
|
.word CONFIG_SYS_XWAY_EBU_BOOTCFG
|
|
.word 0x0
|
|
#endif
|
|
#if defined(CONFIG_MALTA)
|
|
/*
|
|
* Linux expects the Board ID here.
|
|
*/
|
|
.org 0x10
|
|
.word 0x00000420 # 0x420 (Malta Board with CoreLV)
|
|
.word 0x00000000
|
|
#endif
|
|
|
|
#if defined(CONFIG_ROM_EXCEPTION_VECTORS)
|
|
/*
|
|
* Exception vector entry points. When running from ROM, an exception
|
|
* cannot be handled. Halt execution and transfer control to debugger,
|
|
* if one is attached.
|
|
*/
|
|
.org 0x200
|
|
/* TLB refill, 32 bit task */
|
|
uhi_mips_exception
|
|
|
|
.org 0x280
|
|
/* XTLB refill, 64 bit task */
|
|
uhi_mips_exception
|
|
|
|
.org 0x300
|
|
/* Cache error exception */
|
|
uhi_mips_exception
|
|
|
|
.org 0x380
|
|
/* General exception */
|
|
uhi_mips_exception
|
|
|
|
.org 0x400
|
|
/* Catch interrupt exceptions */
|
|
uhi_mips_exception
|
|
|
|
.org 0x480
|
|
/* EJTAG debug exception */
|
|
1: b 1b
|
|
nop
|
|
|
|
.org 0x500
|
|
#endif
|
|
|
|
reset:
|
|
#if __mips_isa_rev >= 6
|
|
mfc0 t0, CP0_CONFIG, 5
|
|
and t0, t0, MIPS_CONF5_VP
|
|
beqz t0, 1f
|
|
nop
|
|
|
|
b 2f
|
|
mfc0 t0, CP0_GLOBALNUMBER
|
|
#endif
|
|
|
|
#ifdef CONFIG_ARCH_BMIPS
|
|
1: mfc0 t0, CP0_DIAGNOSTIC, 3
|
|
and t0, t0, (1 << 31)
|
|
#else
|
|
1: mfc0 t0, CP0_EBASE
|
|
and t0, t0, EBASE_CPUNUM
|
|
#endif
|
|
|
|
/* Hang if this isn't the first CPU in the system */
|
|
2: beqz t0, 4f
|
|
nop
|
|
3: wait
|
|
b 3b
|
|
nop
|
|
|
|
/* Init CP0 Status */
|
|
4: mfc0 t0, CP0_STATUS
|
|
and t0, ST0_IMPL
|
|
or t0, ST0_BEV | ST0_ERL | STATUS_SET
|
|
mtc0 t0, CP0_STATUS
|
|
|
|
/*
|
|
* Check whether CP0 Config1 is implemented. If not continue
|
|
* with legacy Watch register initialization.
|
|
*/
|
|
mfc0 t0, CP0_CONFIG
|
|
bgez t0, wr_legacy
|
|
nop
|
|
|
|
/*
|
|
* Check WR bit in CP0 Config1 to determine if Watch registers
|
|
* are implemented.
|
|
*/
|
|
mfc0 t0, CP0_CONFIG, 1
|
|
andi t0, (1 << 3)
|
|
beqz t0, wr_done
|
|
nop
|
|
|
|
/* Clear Watch Status bits and disable watch exceptions */
|
|
li t1, 0x7 # Clear I, R and W conditions
|
|
init_wr 0
|
|
init_wr 1
|
|
init_wr 2
|
|
init_wr 3
|
|
init_wr 4
|
|
init_wr 5
|
|
init_wr 6
|
|
init_wr 7
|
|
b wr_done
|
|
nop
|
|
|
|
wr_legacy:
|
|
MTC0 zero, CP0_WATCHLO
|
|
mtc0 zero, CP0_WATCHHI
|
|
|
|
wr_done:
|
|
/* Clear WP, IV and SW interrupts */
|
|
mtc0 zero, CP0_CAUSE
|
|
|
|
/* Clear timer interrupt (CP0_COUNT cleared on branch to 'reset') */
|
|
mtc0 zero, CP0_COMPARE
|
|
|
|
#ifndef CONFIG_SKIP_LOWLEVEL_INIT
|
|
mfc0 t0, CP0_CONFIG
|
|
and t0, t0, MIPS_CONF_IMPL
|
|
or t0, t0, CONF_CM_UNCACHED
|
|
mtc0 t0, CP0_CONFIG
|
|
ehb
|
|
#endif
|
|
|
|
#ifdef CONFIG_MIPS_CM
|
|
PTR_LA t9, mips_cm_map
|
|
jalr t9
|
|
nop
|
|
#endif
|
|
|
|
#ifdef CONFIG_MIPS_INIT_STACK_IN_SRAM
|
|
/* Set up initial stack and global data */
|
|
setup_stack_gd
|
|
|
|
# ifdef CONFIG_DEBUG_UART
|
|
/* Earliest point to set up debug uart */
|
|
PTR_LA t9, debug_uart_init
|
|
jalr t9
|
|
nop
|
|
# endif
|
|
#endif
|
|
|
|
#ifndef CONFIG_SKIP_LOWLEVEL_INIT
|
|
# ifdef CONFIG_SYS_MIPS_CACHE_INIT_RAM_LOAD
|
|
/* Initialize any external memory */
|
|
PTR_LA t9, lowlevel_init
|
|
jalr t9
|
|
nop
|
|
# endif
|
|
|
|
/* Initialize caches... */
|
|
PTR_LA t9, mips_cache_reset
|
|
jalr t9
|
|
nop
|
|
|
|
# ifndef CONFIG_SYS_MIPS_CACHE_INIT_RAM_LOAD
|
|
/* Initialize any external memory */
|
|
PTR_LA t9, lowlevel_init
|
|
jalr t9
|
|
nop
|
|
# endif
|
|
#endif
|
|
|
|
#ifndef CONFIG_MIPS_INIT_STACK_IN_SRAM
|
|
/* Set up initial stack and global data */
|
|
setup_stack_gd
|
|
|
|
# ifdef CONFIG_DEBUG_UART
|
|
/* Earliest point to set up debug uart */
|
|
PTR_LA t9, debug_uart_init
|
|
jalr t9
|
|
nop
|
|
# endif
|
|
#endif
|
|
|
|
move a0, zero # a0 <-- boot_flags = 0
|
|
PTR_LA t9, board_init_f
|
|
|
|
jr t9
|
|
move ra, zero
|
|
|
|
END(_start)
|