mirror of
https://github.com/brain-hackers/u-boot-brain
synced 2024-08-18 07:58:52 +09:00
![Patrice Chotard](/assets/img/avatar_default.png)
Add regulator nodes needed by stpmu1 regulator driver Add vmmc-supply and vqmmc-supply regulator property for sdmmc1 and sdmmc2. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
477 lines
10 KiB
Plaintext
477 lines
10 KiB
Plaintext
/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
|
|
/*
|
|
* Copyright (C) STMicroelectronics 2017 - All Rights Reserved
|
|
* Author: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include "stm32mp157.dtsi"
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/pinctrl/stm32-pinfunc.h>
|
|
#include <dt-bindings/mfd/st,stpmu1.h>
|
|
|
|
/ {
|
|
model = "STMicroelectronics STM32MP157C pmic eval daughter";
|
|
compatible = "st,stm32mp157c-ed1", "st,stm32mp157";
|
|
|
|
chosen {
|
|
bootargs = "earlyprintk console=ttyS3,115200 root=/dev/ram";
|
|
stdout-path = "serial3:115200n8";
|
|
};
|
|
|
|
memory {
|
|
reg = <0xC0000000 0x40000000>;
|
|
};
|
|
|
|
sd_switch: regulator-sd_switch {
|
|
compatible = "regulator-gpio";
|
|
regulator-name = "sd_switch";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <2900000>;
|
|
regulator-type = "voltage";
|
|
regulator-always-on;
|
|
|
|
gpios = <&gpiof 14 GPIO_ACTIVE_HIGH>;
|
|
gpios-states = <0>;
|
|
states = <1800000 0x1 2900000 0x0>;
|
|
};
|
|
};
|
|
|
|
&gpioa {
|
|
status = "okay";
|
|
};
|
|
|
|
&gpiob {
|
|
status = "okay";
|
|
};
|
|
|
|
&gpioc {
|
|
status = "okay";
|
|
};
|
|
|
|
&gpiod {
|
|
status = "okay";
|
|
};
|
|
|
|
&gpioe {
|
|
status = "okay";
|
|
};
|
|
|
|
&gpiof {
|
|
status = "okay";
|
|
};
|
|
|
|
&gpiog {
|
|
status = "okay";
|
|
};
|
|
|
|
&gpioh {
|
|
status = "okay";
|
|
};
|
|
|
|
&gpioi {
|
|
status = "okay";
|
|
};
|
|
|
|
&gpioj {
|
|
status = "okay";
|
|
};
|
|
|
|
&gpiok {
|
|
status = "okay";
|
|
};
|
|
|
|
&gpioz {
|
|
status = "okay";
|
|
};
|
|
|
|
&pinctrl {
|
|
uart4_pins_a: uart4@0 {
|
|
pins1 {
|
|
pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
|
|
bias-disable;
|
|
drive-push-pull;
|
|
slew-rate = <0>;
|
|
};
|
|
pins2 {
|
|
pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
sdmmc1_b4_pins_a: sdmmc1-b4@0 {
|
|
pins {
|
|
pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
|
|
<STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
|
|
<STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
|
|
<STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
|
|
<STM32_PINMUX('C', 12, AF12)>, /* SDMMC1_CK */
|
|
<STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
|
|
slew-rate = <3>;
|
|
drive-push-pull;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
sdmmc1_dir_pins_a: sdmmc1-dir@0 {
|
|
pins {
|
|
pinmux = <STM32_PINMUX('F', 2, AF11)>, /* SDMMC1_D0DIR */
|
|
<STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */
|
|
<STM32_PINMUX('B', 9, AF11)>, /* SDMMC1_CDIR */
|
|
<STM32_PINMUX('E', 4, AF8)>; /* SDMMC1_CKIN */
|
|
slew-rate = <3>;
|
|
drive-push-pull;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
sdmmc2_b4_pins_a: sdmmc2-b4@0 {
|
|
pins {
|
|
pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
|
|
<STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */
|
|
<STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
|
|
<STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */
|
|
<STM32_PINMUX('E', 3, AF9)>, /* SDMMC2_CK */
|
|
<STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
|
|
slew-rate = <3>;
|
|
drive-push-pull;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
sdmmc2_d47_pins_a: sdmmc2-d47@0 {
|
|
pins {
|
|
pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
|
|
<STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
|
|
<STM32_PINMUX('E', 5, AF9)>, /* SDMMC2_D6 */
|
|
<STM32_PINMUX('D', 3, AF9)>; /* SDMMC2_D7 */
|
|
slew-rate = <3>;
|
|
drive-push-pull;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
};
|
|
|
|
&pinctrl_z {
|
|
i2c4_pins_a: i2c4@0 {
|
|
pins {
|
|
pinmux = <STM32_PINMUX('Z', 4, AF6)>, /* I2C4_SCL */
|
|
<STM32_PINMUX('Z', 5, AF6)>; /* I2C4_SDA */
|
|
bias-disable;
|
|
drive-open-drain;
|
|
slew-rate = <0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c4 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c4_pins_a>;
|
|
i2c-scl-rising-time-ns = <185>;
|
|
i2c-scl-falling-time-ns = <20>;
|
|
status = "okay";
|
|
|
|
pmic: stpmu1@33 {
|
|
compatible = "st,stpmu1";
|
|
reg = <0x33>;
|
|
interrupts = <0 2>;
|
|
interrupt-parent = <&gpioa>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
status = "okay";
|
|
|
|
st,main_control_register = <0x04>;
|
|
st,vin_control_register = <0xc0>;
|
|
st,usb_control_register = <0x30>;
|
|
|
|
regulators {
|
|
compatible = "st,stpmu1-regulators";
|
|
|
|
ldo1-supply = <&v3v3>;
|
|
ldo2-supply = <&v3v3>;
|
|
ldo3-supply = <&vdd_ddr>;
|
|
ldo5-supply = <&v3v3>;
|
|
ldo6-supply = <&v3v3>;
|
|
pwr_sw1-supply = <&bst_out>;
|
|
pwr_sw2-supply = <&bst_out>;
|
|
|
|
vddcore: buck1 {
|
|
regulator-name = "vddcore";
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-always-on;
|
|
regulator-initial-mode = <2>;
|
|
regulator-over-current-protection;
|
|
|
|
regulator-state-standby {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <1200000>;
|
|
regulator-mode = <8>;
|
|
};
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
regulator-state-disk {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdd_ddr: buck2 {
|
|
regulator-name = "vdd_ddr";
|
|
regulator-min-microvolt = <1350000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-always-on;
|
|
regulator-initial-mode = <2>;
|
|
regulator-over-current-protection;
|
|
|
|
regulator-state-standby {
|
|
regulator-suspend-microvolt = <1350000>;
|
|
regulator-on-in-suspend;
|
|
regulator-mode = <8>;
|
|
};
|
|
regulator-state-mem {
|
|
regulator-suspend-microvolt = <1350000>;
|
|
regulator-on-in-suspend;
|
|
regulator-mode = <8>;
|
|
};
|
|
regulator-state-disk {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdd: buck3 {
|
|
regulator-name = "vdd";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
st,mask_reset;
|
|
regulator-initial-mode = <8>;
|
|
regulator-over-current-protection;
|
|
|
|
regulator-state-standby {
|
|
regulator-suspend-microvolt = <3300000>;
|
|
regulator-on-in-suspend;
|
|
regulator-mode = <8>;
|
|
};
|
|
regulator-state-mem {
|
|
regulator-suspend-microvolt = <3300000>;
|
|
regulator-on-in-suspend;
|
|
regulator-mode = <8>;
|
|
};
|
|
regulator-state-disk {
|
|
regulator-suspend-microvolt = <3300000>;
|
|
regulator-on-in-suspend;
|
|
regulator-mode = <8>;
|
|
};
|
|
};
|
|
|
|
v3v3: buck4 {
|
|
regulator-name = "v3v3";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
regulator-over-current-protection;
|
|
regulator-initial-mode = <8>;
|
|
|
|
regulator-state-standby {
|
|
regulator-suspend-microvolt = <3300000>;
|
|
regulator-unchanged-in-suspend;
|
|
regulator-mode = <8>;
|
|
};
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
regulator-state-disk {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdda: ldo1 {
|
|
regulator-name = "vdda";
|
|
regulator-min-microvolt = <2900000>;
|
|
regulator-max-microvolt = <2900000>;
|
|
interrupts = <IT_CURLIM_LDO1 0>;
|
|
interrupt-parent = <&pmic>;
|
|
|
|
regulator-state-standby {
|
|
regulator-suspend-microvolt = <2900000>;
|
|
regulator-unchanged-in-suspend;
|
|
};
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
regulator-state-disk {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
v2v8: ldo2 {
|
|
regulator-name = "v2v8";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
interrupts = <IT_CURLIM_LDO2 0>;
|
|
interrupt-parent = <&pmic>;
|
|
|
|
regulator-state-standby {
|
|
regulator-suspend-microvolt = <2800000>;
|
|
regulator-unchanged-in-suspend;
|
|
};
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
regulator-state-disk {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vtt_ddr: ldo3 {
|
|
regulator-name = "vtt_ddr";
|
|
regulator-min-microvolt = <0000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-always-on;
|
|
regulator-over-current-protection;
|
|
|
|
regulator-state-standby {
|
|
regulator-off-in-suspend;
|
|
};
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
regulator-state-disk {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdd_usb: ldo4 {
|
|
regulator-name = "vdd_usb";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
interrupts = <IT_CURLIM_LDO4 0>;
|
|
interrupt-parent = <&pmic>;
|
|
|
|
regulator-state-standby {
|
|
regulator-unchanged-in-suspend;
|
|
};
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
regulator-state-disk {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdd_sd: ldo5 {
|
|
regulator-name = "vdd_sd";
|
|
regulator-min-microvolt = <2900000>;
|
|
regulator-max-microvolt = <2900000>;
|
|
interrupts = <IT_CURLIM_LDO5 0>;
|
|
interrupt-parent = <&pmic>;
|
|
regulator-boot-on;
|
|
|
|
regulator-state-standby {
|
|
regulator-suspend-microvolt = <2900000>;
|
|
regulator-unchanged-in-suspend;
|
|
};
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
regulator-state-disk {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
v1v8: ldo6 {
|
|
regulator-name = "v1v8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
interrupts = <IT_CURLIM_LDO6 0>;
|
|
interrupt-parent = <&pmic>;
|
|
|
|
regulator-state-standby {
|
|
regulator-suspend-microvolt = <1800000>;
|
|
regulator-unchanged-in-suspend;
|
|
};
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
regulator-state-disk {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vref_ddr: vref_ddr {
|
|
regulator-name = "vref_ddr";
|
|
regulator-always-on;
|
|
regulator-over-current-protection;
|
|
|
|
regulator-state-standby {
|
|
regulator-on-in-suspend;
|
|
};
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
};
|
|
regulator-state-disk {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
bst_out: boost {
|
|
regulator-name = "bst_out";
|
|
interrupts = <IT_OCP_BOOST 0>;
|
|
interrupt-parent = <&pmic>;
|
|
};
|
|
|
|
vbus_otg: pwr_sw1 {
|
|
regulator-name = "vbus_otg";
|
|
interrupts = <IT_OCP_OTG 0>;
|
|
interrupt-parent = <&pmic>;
|
|
regulator-active-discharge;
|
|
};
|
|
|
|
vbus_sw: pwr_sw2 {
|
|
regulator-name = "vbus_sw";
|
|
interrupts = <IT_OCP_SWOUT 0>;
|
|
interrupt-parent = <&pmic>;
|
|
regulator-active-discharge;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&sdmmc1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>;
|
|
broken-cd;
|
|
st,dirpol;
|
|
st,negedge;
|
|
st,pin-ckin;
|
|
bus-width = <4>;
|
|
vmmc-supply = <&vdd_sd>;
|
|
vqmmc-supply = <&sd_switch>;
|
|
sd-uhs-sdr12;
|
|
sd-uhs-sdr25;
|
|
sd-uhs-sdr50;
|
|
sd-uhs-ddr50;
|
|
sd-uhs-sdr104;
|
|
status = "okay";
|
|
};
|
|
|
|
&sdmmc2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>;
|
|
non-removable;
|
|
no-sd;
|
|
no-sdio;
|
|
st,dirpol;
|
|
st,negedge;
|
|
bus-width = <8>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart4 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart4_pins_a>;
|
|
status = "okay";
|
|
};
|